Jessy pastes stamps for 160 envelopes in 2 hours. If she pastes the stamps at the same rate, for how many envelopes can she paste stamps in 30 minutes ?

The area bounded by a chord and arc it intercepts is known as a segment of a circle segment of a circle

The area of the circle enclosed by line PL and arc PL is approximately 37.62 square units

The reason the above value is correct is as follows:

The given parameters in the question are;

The radius of the circle, r = 11

The length of the chord PL = 16

The measure of angle ∠PAL = 93°

Required:

The area of part of the circle enclosed by chord PL and arc PL

Solution:

The shaded area of the given circle is the minor segment of the circle enclosed by line PL and arc PL

The area of a segment of a circle is given by the following formula;

Area of segment = Area of the sector - Area of the triangle

Area of segment = Area of minor sector APL - Area of triangle APL

Area of minor sector APL:

Area of a sector = (θ/360)×π·r²

Where;

r = The radius of the circle

θ = The angle of the sector of the circle

Plugging in the the values of r and θ, we get;

Area of the minor sector APL = (93°/360°) × π × 11² ≈ 98.2 square units

Area of Triangle APL:

Area of a triangle = (1/2) × Base length × Height

Therefore;

The area of ΔAPL = (1/2) × 16 × 11 × cos(93°/2) ≈ 60.58 square units

Required shaded area enclosed by line PL and arc PL:

Therefore, the area of shaded segment enclosed by line PL and arc PL is found as follows;

Area of the required segment PL ≈ (98.2 - 60.58) square units = 37.62 square units

The area of the circle enclosed by line PL and arc PL ≈ 37.62 square units

Learn more about the finding the area of a segment can be found here:

https://brainly.com/question/22599425

The area of the circle enclosed by line segment PL and circle arc PL is 37.80 square units.

The calculation of the area between line segment PL and circle arc PL is described below:

1) Calculation of the area of the circle arc.

2) Calculation of the area of the triangle.

3) Subtracting the area found in 2) from the area found in 1).

Step 1:

The area of a circle arc is determined by the following formula:

[tex]A_{ca} = \frac{\alpha\cdot \pi\cdot r^{2}}{360}[/tex] (1)

Where:

[tex]A_{ca}[/tex] - Area of the circle arc.

[tex]\alpha[/tex] - Arc angle, in sexagesimal degrees.

[tex]r[/tex] - Radius.

If we know that [tex]\alpha = 93^{\circ}[/tex] and [tex]r = 11[/tex], then the area of the circle arc is:

[tex]A_{ca} = \frac{93\cdot \pi\cdot 11^{2}}{360}[/tex]

[tex]A_{ca} \approx 98.201[/tex]

Step 2:

The area of the triangle is determined by Heron's formula:

[tex]A_{t} = \sqrt{s\cdot (s-l)\cdot (s-r)^{2}}[/tex] (2)

[tex]s = \frac{l + 2\cdot r}{2}[/tex]

Where:

[tex]A_{t}[/tex] - Area of the triangle.

[tex]r[/tex] - Radius.

[tex]l[/tex] - Length of the line segment PL.

If we know that [tex]l = 16[/tex] and [tex]r = 11[/tex], then the area of the triangle is:

[tex]s = \frac{16+2\cdot (11)}{2}[/tex]

[tex]s = 19[/tex]

[tex]A_{t} = \sqrt{19\cdot (19-16)\cdot (19-11)^{2}}[/tex]

[tex]A_{t} \approx 60.399[/tex]

Step 3:

And the area between the line segment PL and the circle arc PL is:

[tex]A_{s} = A_{ca}-A_{t}[/tex]

[tex]A_{s} = 98.201 - 60.399[/tex]

[tex]A_{s} = 37.802[/tex]

The area of the circle enclosed by line segment PL and circle arc PL is 37.80 square units.

The complete table is

x    y

0    0.75

3     3.75

9     9.75

An equation is a mathematical statement that is made up of two expressions connected by an equal sign.

Substitution means putting numbers in place of letters to calculate the value of an expression or equation.

According to the given question.

We have values of x.

Also, one rule that y is 0.75 greater than x.

So, we have a equation for finding the value of y  i.e.

[tex]y = x + 0.75..(i)[/tex]

For finding the value of y

At x = 0, substitute x = 0 in equation (i)

[tex]y = 0 + 0.75\\\implies y = 0.75[/tex]

At x = 3, substitute x = 3 in equation (i)

[tex]y = 3+0.75\\\implies y = 3.75[/tex]

At x = 9, substitute x = 9 in equation (i)

[tex]y = 9+0.75\\\implies y = 9.75[/tex]

Hence, the complete table is

x    y

0    0.75

3     3.75

9     9.75

Find out more information about equation and substitution here:

https://brainly.com/question/10852714

#SPJ2

Answer:

First, find two points on the graph:

Slope = [tex]\frac{y_{2}-y_{1} }{x_{2}-x_{1}} = \frac{8-2}{2-0} =\frac{6}{2}=3[/tex]

16 + (-3) = 16 - 3 = 13

Answer:

No

Step-by-step explanation:

No matter the situation, when you multiply a negative by a negativeyou get a positive and a positive by a positive you get a positive. but if its two different like a negative and a positive then its NEGITIVE.

let's say you have 23 and you're multiplying by 2.

It's always increasing so it doesnt ever reach the negitive numbers.

Answer:

b because it is I found out cus I took test

The length of the arc 9π/2 km.

The answer is option C.9π/2 km.

The arc period of a circle can be calculated with the radius and relevant perspective using the arc period method.

  ⇒angle= arc/radius

     ⇒  135°=arc/6km

     ⇒ arc =135°*6km

     ⇒arc=135°*π/180° * 6km

    ⇒arc = 9π/2 km

Learn more about circle here:-https://brainly.com/question/24375372

#SPJ2

Answer:

574

Step-by-step explanation:

To round a two-digit number to the nearest ten, simply increase it or decrease it to the nearest number that ends in 0: When a number ends in 1, 2, 3, or 4, bring it down; in other words, keep the tens digit the same and turn the ones digit into a 0

Hope this helps <3

Answer:

A

Step-by-step explanation:

c and d out of the question

b has its circle filled in meaning it could be 15lbs, which it's not

A correct answer by default

Answer:b

Step-by-step explanation: it has a filled in diamond which mean it's that...

Rectangular prism and cylinder make up a camera.

A cube is a rectangular prism with all of its sides being the same length, a triangular prism has a triangle as its base, and a rectangular prism has a rectangle as its foundation. Another form of right prism that has a circle as its basis is a cylinder.

A rectangular prism includes a total of 6 faces, 12 sides, and eight vertices. Like a cuboid, it contains three dimensions- the base width, the height, and the length. The top and base of the rectangular prism exist rectangular. The pairs of opposite faces of a rectangular prism exist as identical or congruent.

A cylinder contains traditionally been a three-dimensional solid, one of the most essential curvilinear geometric shapes. Geometrically, it includes been regarded as a prism with a circle as its base.

Hence, Rectangular prism and cylinder make up a camera.

To learn more about rectangular prisms and cylinders refer to:

https://brainly.com/question/15594686

#SPJ2

Answer:

56

Step-by-step explanation:

A=(3*4)+(4*(4+3+4))=56

Answer:

9.9 hours

Step-by-step explanation:

The formula to determine the time together is

1/a+1/b = 1/c  where a and b are the times alone and c is the time together

1/18 + 1/22 = 1/c

The least common multiply of the denominators is 198c

198c(1/18 + 1/22 = 1/c)

11c+ 9c = 198

20c = 198

Divide by 20

20c/20 =198/20

c =9.9

Answer:

B - 9.9 hrs

Step-by-step explanation:

took the test.

y=x²-10x-7

a>0 so we will be looking for minimum

x=-b/2a=10/2=5

y=25-50-7=-32

Answer: (5;32)

Answer:

TRUE

Step-by-step explanation:

I SEEN SOME ONE ELSE WIT 5 STARS SAY SO(:

The given segment can form triangle. Therefore, the given statement is true.

A polygon has three edges as well as three vertices is called a triangle. It's one of the fundamental geometric shapes. In Euclidean geometry, each and every three points that are not collinear produce a distinct triangle and a distinct plane. In other words, every triangle was contained in a plane, and there is only single plane that encompasses that triangle.

All triangles are enclosed in a single plane if all of geometry is the Euclidean plane, however this is no longer true in higher-dimensional Euclidean spaces. Unless when otherwise specified, this article discusses triangles within Euclidean geometry, namely the Euclidean plane. The given segment can form triangle.

Therefore, the given statement is true.

To know more about triangle, here:

https://brainly.com/question/14712269

#SPJ7

Answer:

x = 3/4

Step-by-step explanation:

2(4x + 2) = 10           Remove the brackets

8x + 4 = 10               Subtract 4 from both sides

8x = 6                       Divide by 8

x = 6/8

x = 3/4

Check

2(4*3/4 + 2) =?10

2( 3 + 2) = 10

2*5 = 10

10 = 10

Answer: $100

Step-by-step explanation:

Considering 50 + 50 = 100

This means that the amount of money is $100

Answer:

201.1 km²

Step-by-step explanation:

Surface area of a sphere= 4πr², where r = radius

so,

4πr²

= 4×π×4²

= 64π

= 201.1 km² (rounded to the nearest tenth)

Answer:

15/8

Step-by-step explanation:

tan(62)=P/B

tan(62)=15/8

Answer:

m<1=145

m<2=35

m<3=35

Step-by-step explanation:

measure one is supplementary(the angles add to 180) to measure four.

so we do 180-35=145

measure 2 is congruent to measure four because they are corresponding angles

so measure 2=35

and measure 3 is also congruent to measure 4 because the are corresponding angles

so m<3=35

Answer:

[tex]P(x \le 3) = 0.9920[/tex]

Step-by-step explanation:

Given

[tex]p = 6\%[/tex] --- proportion of drivers that had accident

[tex]n = 14[/tex] -- selected drivers

Required

[tex]P(x \le 3)[/tex]

The question is an illustration of binomial probability, and it is calculated using:

[tex]P(x ) = ^nC_x * p^x * (1 - p)^{n-x}[/tex]

So, we have:

[tex]P(x \le 3) = P(x = 0) +P(x = 1) +P(x = 2) +P(x = 3)[/tex]

[tex]P(x=0 ) = ^{14}C_0 * (6\%)^0 * (1 - 6\%)^{14-0} = 0.42052319017[/tex]

[tex]P(x=1 ) = ^{14}C_1 * (6\%)^1 * (1 - 6\%)^{14-1} = 0.37578668057[/tex]

[tex]P(x=2 ) = ^{14}C_2 * (6\%)^2 * (1 - 6\%)^{14-2} = 0.15591149513[/tex]

[tex]P(x=3 ) = ^{14}C_3 * (6\%)^3 * (1 - 6\%)^{14-3} = 0.03980719024[/tex]

So, we have:

[tex]P(x \le 3) = 0.42052319017+0.37578668057+0.15591149513+0.03980719024[/tex]

[tex]P(x \le 3) = 0.99202855611[/tex]

[tex]P(x \le 3) = 0.9920[/tex] -- approximated

Answer:

[tex](f-g)(x)[/tex]

[tex]f(x)-g(x)[/tex]

[tex]x^{2} -6x-27-x+9[/tex]

[tex]x^{2} -7x-18[/tex]

----------------------

[tex](f*g)(x)[/tex]

[tex]=f(x)g(x)[/tex]

[tex](x^{2} -6x-27)(x-9)[/tex]

[tex]=x^{3} -15x^{2}+27x+243[/tex]

----------------------

[tex]\frac{f}{g} (x)[/tex]

[tex]\frac{x^{2} -6x-27}{x-9}[/tex]

[tex]\frac{(x-9)(x+3)}{x-9}[/tex]

[tex]x+3[/tex]

-----------------------

[tex](f+g)(x)[/tex]

[tex]f(x)+g(x)[/tex]

[tex]=x^{2} -6x-27+x-9[/tex]

[tex]=x^{2} -5x-36[/tex]

------------------------

OAmalOHopeO

------------------------

Answer:

9/20

Step-by-step explanation:

450/1000

this is not the answer, because it is not simplified

so here we have to find common factor and simplifying

________________________________________________

450/1000 is simplified to 9/20, and it can no longer be simplified.

Answer:

Apply Hooke's Law to the integral application for work: W = int_a^b F dx , we get:

W = int_a^b kx dx

W = k * int_a^b x dx

Apply Power rule for integration: int x^n(dx) = x^(n+1)/(n+1)

W = k * x^(1+1)/(1+1)|_a^b

W = k * x^2/2|_a^b

From the given work: seven and one-half foot-pounds (7.5 ft-lbs) , note that the units has "ft" instead of inches.   To be consistent, apply the conversion factor: 12 inches = 1 foot then:

2 inches = 1/6 ft

1/2 or 0.5 inches =1/24 ft

To solve for k, we consider the initial condition of applying 7.5 ft-lbs to compress a spring  2 inches or 1/6 ft from its natural length. Compressing 1/6 ft of it natural length implies the boundary values: a=0 to b=1/6 ft.

Applying  W = k * x^2/2|_a^b , we get:

7.5= k * x^2/2|_0^(1/6)

Apply definite integral formula: F(x)|_a^b = F(b)-F(a) .

7.5 =k [(1/6)^2/2-(0)^2/2]

7.5 = k * [(1/36)/2 -0]

7.5= k *[1/72]

k =7.5*72

k =540

To solve for the work needed to compress the spring with additional 1/24 ft, we  plug-in: k =540 , a=1/6 , and b = 5/24 on W = k * x^2/2|_a^b .

Note that compressing "additional one-half inches" from its 2 inches compression is the same as to  compress a spring 2.5 inches or 5/24 ft from its natural length.

W= 540 * x^2/2|_((1/6))^((5/24))

W = 540 [ (5/24)^2/2-(1/6)^2/2 ]

W =540 [25/1152- 1/72 ]

W =540[1/128]

W=135/32 or 4.21875 ft-lbs

Step-by-step explanation:

The given line is orthogonal to the plane you want to find, so the tangent vector of this line can be used as the normal vector for the plane.

The tangent vector for the line is

d/dt (⟨0, 9, 6⟩ + ⟨7, -7, -6⟩t ) = ⟨7, -7, -6⟩

Then the plane that passes through the origin with this as its normal vector has equation

⟨x, y, z⟩ • ⟨7, -7, -6⟩ = 0

We want the plane to pass through the point (9, 6, 0), so we just translate every vector pointing to the plane itself by adding ⟨9, 6, 0⟩,

(⟨x, y, z⟩ - ⟨9, 6, 0⟩) • ⟨7, -7, -6⟩ = 0

Simplifying this expression and writing it standard form gives

⟨x - 9, y - 6, z⟩ • ⟨7, -7, -6⟩ = 0

7 (x - 9) - 7 (y - 6) - 6z = 0

7x - 63 - 7y + 42 - 6z = 0

7x - 7y - 6z = 21

so that

a = 7, b = -7, c = -6, and d = 21

An equation of the plane orthogonal to the line 7x - 7y - 6z = 21.

The given line is orthogonal to the plane you want to find,

So the tangent vector of this line can be used as

The normal vector for the plane.

The tangent vector for the line is,

A tangent vector is a vector that is tangent to a curve or surface at a given point.

d/dt (⟨0, 9, 6⟩ + ⟨7, -7, -6⟩t ) = ⟨7, -7, -6⟩

Then the plane that passes through the origin with this as its normal vector has the equation

⟨x, y, z⟩ • ⟨7, -7, -6⟩ = 0

We want the plane to pass through the point (9, 6, 0), so we just

translate every vector pointing to the plane itself by adding ⟨9, 6, 0⟩,

(⟨x, y, z⟩ - ⟨9, 6, 0⟩) • ⟨7, -7, -6⟩ = 0

Simplifying this expression and writing it in standard form gives

⟨x - 9, y - 6, z⟩ • ⟨7, -7, -6⟩ = 0

7 (x - 9) - 7 (y - 6) - 6z = 0

7x - 63 - 7y + 42 - 6z = 0

7x - 7y - 6z = 21

So that, a = 7, b = -7, c = -6, and d = 21.

To learn more about the equation of plane visit:

https://brainly.com/question/1603217

Step-by-step explanation:

F(n)=|sin(n)|+|sin(n+1)|

then

F(n+π)=|sin(n+π)|+|sin(n+π+1)|=|sin(n)|+|sin(n+1)|=F(n)

and

F(π−n)=|sin(π−n)|+|sin(π−n+1)|=|sinn|+|sin(n−1)|≠F(n)

so we must prove when n∈(0,π), have

F(n)>2sin12

when n∈(0,π−1),then

F(n)=sinn+sin(n+1)=sinn(1+cos1)+sin1cosn

and n∈(π−1,π),then

F(n)=sinn−sin(n+1)

How prove it this two case have F(n)>2sin12? Thank you

and I know this well know inequality

|sinx|+|sin(x+1)|+|sin(x−1)|≥2sin1,x∈R

Answer:

[tex]\frac{98p^{6}}{q}[/tex]

Step-by-step explanation:

Distribute the exponents

[tex](\frac{(7^{-2}p^{-6}q^{-8})}{2q^{-9}} )^{-1}[/tex]

[tex](\frac{q}{98p^{6}} )^{-1}[/tex]

Distribute the -1

[tex]\frac{98p^{6}}{q}[/tex]

Answer:

Permutation ; 210 ways

Step-by-step explanation:

Permutation and combination methods refers to mathematical solution to finding the number of ways of making selection for a group of objects.

Usually, selection process whereby the order of selection does not matter are being treated using permutation, while those which takes the order of selection into cognizance are calculated using combination.

Here, selecting 2 players from 15 ; since order does not matter, we use permutation ;

Recall :

nPr = n! ÷ (n - r)!

Hence,

15P2 = 15! ÷ (15 - 2)!

15P2 = 15! ÷ 13!

15P2 = (15 * 14) = 210 ways

Answer:

5 a) Total = 20.83 hrs = 20 hrs and 50 mins  (1250mins total)

5 b) Total = 96 meters. = 0.096km in 8 hrs.

Step-by-step explanation:

1km = 1000 meters

5 mins = 4 meters

1000/4 = 250 multiplier

250 x 5mins = 1250 minutes

1250/60 = 20hrs + 50 minutes

50 / 60 =  0.83 = 20.83hrs

b)  8 hrs = 8 x 60 = 480 minutes

480/5 = 24 multiplier of 4 meters

24 x 4 = 96 meters

Answer:

x = 34

Step-by-step explanation:

Pytago:

x[tex]30^{2} + 16^{2} = x^2\\x = \sqrt{30^2 + 16^2} \\x = 34[/tex]