Answer:
FN
It would be the normal force, represented with
What is the normal force?
We define normal forces as the forces that surfaces push against other surfaces so solid objects don't pass through each other.
In this case, the box lies on the floor. So the floor will make a normal force against the box. And that force is normal to the floor (so it is perpendicular to the surface).
This is the only upward force perpendiclar to the floor that affects the box, and is represented as:
If you want to learn more about normal forces, you can read:
Explanation:
Which circuits are parallel circuits?
0
WA
AHE
Answer:
the 5 is because u have to select the currents and volts which gives us 2 and 1 plus 3 is 6 but if we rest 1 is 5, thats the answer
If the temperature of the conductor is increased, the electrons’ speeds decrease
Answer:
HOPE IT HELPS YOU!!!
Explanation:
Mark FadedGirl25 as brainliest
(a) Suppose that a NASCAR race car is moving to the right with a constant velocity of +96 m/s. What is the average acceleration of the car? (b) Twelve seconds later, the car is halfway around the track and traveling in the opposite direction with the same speed. What is the average acceleration of the car?
can some one tell the answers
If you borrow $12250 and pay $147 in annual interest, the APR on your loan is 1.2% 14.7% 1.23% 7.35%
Answer: 1.2%
Explanation:
Given
If one borrows $12,250
and give $147 interest on it
Then the interest is given from the formula
[tex]\Rightarrow S.I=\dfrac{P\times R\times T}{100}\\\\\Rightarrow 147=\dfrac{12,250\times R\times 1}{100}\\\\\Rightarrow R=\dfrac{147}{122.50}\\\\\Rightarrow R=1.2\%[/tex]
Thus, the annual rate of interest is 1.2%
what kind of surface is suitable for infared radiation
Answer:
Different surfaces
You can see that dull surfaces are good absorbers and emitters of infrared radiation. Shiny surfaces are poor absorbers and emitters (but they are good reflectors of infrared radiationTwo objects (48.0 and 25.0 kg) are connected by a massless string that passes over a massless, frictionless pulley. The pulley hangs from the ceiling. Find (a) the acceleration of the objects and (b) the tension in the string.
Answer:
a. 3.09 m/s^2
b. 322.52 N
Explanation:
The computation of the acceleration of the object and the tension of the string is as follows:
The acceleration of the system is a
= (m1 - m2) × g ÷ (m1 + m2)
= (48 - 25) × 9.81 ÷ (48 + 25)
= 3.09 m/s^2
b. The tension in the string is T
= 2 × m1 × m2 × g÷ (m1+m2)
= (2 × 48 × 25 × 9.81) ÷ (48 + 25)
= 322.52 N
A parallel-plate capacitor is connected to a battery of electric potential difference V. If the plate separation is decreased, do the following quantities increase, decrease, or remain the same: (a) the capacitor’s capacitance, (b) the potential difference across the capacitor, (c) the charge on the capacitor, (d) the energy stored by the capacitor, (e) the magnitude of the electric field between the plates, and (f ) the energy density of that electric field?
Answer:
a) increases.
b) remains the same.
c) increases.
d) increases.
e) increases.
f) increases.
Explanation:
a)
Since the capacitance of a parallel-plate depends only on geometric constants and the dielectric between the plates, we can use the following expression to asess the value of the capacitance:[tex]C = \epsilon_{0}*\frac{A}{d} (1)[/tex]
where ε₀ = permitivitty of free space
A = area of one of the plates
d= plate separation
As we can see, if the plate separation is decreased, the value of the capacitance must increase.b)
Per definition the capacitance explains the relationship between the charge on one of the conductors, and the potential difference between them, as follows:[tex]C = \frac{Q}{V} (2)[/tex]
Assuming that the capacitor remains connected to the battery when the plate separation is decreased, since the voltage can't change (as it must hold the same voltage than previously since it's directly connected to the battery) the potential difference between plates must remain the same.c)
From B, we know that V in (2) must remain constant. Since we know from (1) that C must increase, this means from (2) that Q must increase too.d)
The energy stored in the electric field between the plates can be expressed as follows in terms of the capacitance C and the potential difference V:[tex]U = \frac{1}{2}* C*V^{2} (3)[/tex]
From (1) in a) and from b) we know that the capacitance C must increase whilst V must remain the same, so U in (3) must increase also.e)
In the capacitor the magnitude of the Electric field between the plates is constant, and is related to the potential difference between them by the following linear relationship:[tex]V = E*d (4)[/tex]
Since we know that V must remain the same, if the distance d decreases, the electris field E must increase in the same ratio in order to keep the equation balanced.f)
The energy density of the electric field is defined as the energy stored between plates by unit volume, as follows:[tex]u = \frac{U}{v} = \frac{\frac{1}{2}* C*V^{2}}{A*d} =\frac{1}{2}* \epsilon_{0}*\frac{A*V^{2} }{A*d*d} = \frac{1}{2} *\epsilon_{0}*E^{2} (5)[/tex]
Since it's proportional to the square of the electric field, and we know from e) that the magnitude of the electric field must increase, u must increase too.Consider an electric refrigerator located in a room. Determine the direction of the work and heat interactions (in or out) when the following are taken as the system: (a) the contents of the refrigerator, (b) all parts of the refrigerator including the contents, and (c) everything contained within the room during a winter day
Answer:
(a) Heat flows out
Work flows in
(b) Heat flow out
work flows in
(c) Heat flow out
work flows out
Explanation:
(a) According to the first law of thermodynamics, the change in internal energy of the system, ΔU is given as follows;
ΔU = Q - W
According to the second law of thermodynamics, heat will flow from a hot body to a cold body however through work input, a refrigerator causes heat to flow from a cold body to a hot body
Therefore;
Heat flows out of the system (the contents of the refrigerator)
Work is inputted, flows in to the system
(b) Given that the refrigerator pumps heat from the content out, the body of the refrigerator becomes hot relative to the room, and according to the second law of thermodynamics
Heat flow out from the hot system, the refrigerator and its content, to the room
h₁ > h₂, h₂ - h₁ = -ve = -w
Therefore, work flows out the system as the refrigerator operates
(c) During a winter day, the temperature of the room relative to the external environment where it is snowing is higher
Therefore, heat will flow out from the system
Work done, -w = h₂ - h₁, where
h₂ = The heat of the environment
h₁ = The heat in the room
Given that h₁ > h₂, h₂ - h₁ = -ve = -w, therefore, work is done by the system which is the room
Work will flow out of the system
С какой скоростью велосипедист проходит закругление велотрека радиусом 25 м, если центростремительное ускорение при этом 4 м/с2?
10
20
400
100
Explanation:
to determine light brightness
to determine planet compositition
to determine the ages of p
what are the 6 essential nutrients
Answer:
There are six major nutrients: Carbohydrates (CHO), Lipids (fats), Proteins, Vitamins, Minerals, Water.
Explanation:
Por que nos dias de hoje o futebol é mais técnico, com mas estratégias e mais disputado?
Explanation:
[tex]which \: language \: is \: this[/tex]
[tex]pls \: write \: in \: english[/tex]
[tex]then \: only \: i \: can \: answer \: u[/tex]
[tex]otherwise \: sry[/tex]
The wheels on a skateboard have a diameter of 2.93 inches. If a skateboarder is traveling downhill at 23 miles per hour, determine the angular velocity of the wheels in radians per second.
Answer:
The angular velocity of the wheels is 276.314 radians per second.
Explanation:
The wheels are rolling, which is a combination of rotation and translation, whose center of rotation is the point of contact between the wheel and the ground and the geometrical center of the skateboard experiments pure translation. Then, the angular velocity can be found by using the following kinematic expression:
[tex]\omega = \frac{v}{R}[/tex] (1)
Where:
[tex]\omega[/tex] - Angular velocity, in radians per second.
[tex]v[/tex] - Velocity of the wheel at its center, in inches per second.
[tex]R[/tex] - Radius of the wheel, in inches.
If we know that [tex]v = 404.8\,\frac{in}{s}[/tex] and [tex]R = 1.465\,in[/tex], then the angular velocity of the wheels are:
[tex]\omega = \frac{404.8\,\frac{in}{s} }{1.465\,in}[/tex]
[tex]\omega = 276.314\,\frac{rad}{s}[/tex]
The angular velocity of the wheels is 276.314 radians per second.
A 5.4 kg bowling ball and a 2.7 gram ping-pong ball collide head-on. If the magnitude of the force by the bowling ball on the ping-pong ball is 3.5 N, what is the magnitude of the force by the ping-pong ball on the bowling ball
Answer:
The magnitude of force of the ping-pong ball on the bowling ball , [tex]F_p[/tex] = 3.5 N
Explanation:
Given;
mass of the bowling ball, [tex]m_b[/tex] = 5.4 kg
mass of the ping-pong ball, [tex]m_p[/tex] = 2.7 g = 0.0027 kg
magnitude of force of the bowling ball, [tex]F_b[/tex] = 3.5 N
let the magnitude of force of ping-pong ball = [tex]F_p[/tex]
Apply Newton's third law of motion; action and reaction are equal and opposite.
[tex]F_b = -F_p[/tex]
The force of the ping-pong ball on the bowling ball is equal to that of the bowling ball on ping-pong ball, but in opposite direction.
Thus, the magnitude of force of the ping-pong ball on the bowling ball , [tex]F_p[/tex] = 3.5 N
Which of these is a chemical control used to help control invasive species?
using fences
using other species
using herbicides
using barriers
Answer:
a
Explanation:
Using fences.................................
A 0.0780 kg lemming runs off a
5.36 m high cliff at 4.84 m/s. What
is its kinetic energy (KE) when it
is 2.00 m above the ground?
Answer:
0.913
Explanation:
k.e=1/2mv square
k.e=1/2×0.078g×23.4256m/s square
k.e=0.913J
The kinetic energy when the lemming is 2.00 m above the ground is approximately 2.56 J (Joules).
To calculate the kinetic energy (KE) of the lemming when it is 2.00 m above the ground, we need to consider the change in its potential energy (PE) as it falls.
The potential energy at a height h is given by:
PE = m g h
Where:
m is the mass of the lemming (0.0780 kg)
g is the acceleration due to gravity (9.8 m/s²)
h is the height above the ground
Given:
Height of the cliff (h) = 5.36 m
Velocity of the lemming (v) = 4.84 m/s
Height above the ground (h') = 2.00 m
The lemming will lose potential energy as it falls from the cliff, which is converted into kinetic energy. Therefore, the kinetic energy when it is 2.00 m above the ground is equal to the difference between its total initial kinetic energy and the potential energy at that height.
Initial potential energy at the top of the cliff:
PE_initial = m g h
Potential energy when it is 2.00 m above the ground:
PE_final = m * g * h'
The change in potential energy is given by:
ΔPE = PE_final - PE_initial
The kinetic energy (KE) when it is 2.00 m above the ground:
KE = ΔPE = -ΔPE (due to energy conservation)
Let's calculate the potential energy at the top of the cliff and when it is 2.00 m above the ground:
PE_initial = m ×g × h
= 0.0780 kg × 9.8 m/s² × 5.36 m
PE_initial ≈ 4.09 J
PE_final = m ×g × h'
= 0.0780 kg ×9.8 m/s² ×2.00 m
PE_final ≈ 1.53 J
The change in potential energy (ΔPE) is:
ΔPE = PE_final - PE_initial = 1.53 J - 4.09 J
ΔPE ≈ -2.56 J
Since the change in potential energy is equal to the kinetic energy, the kinetic energy when the lemming is 2.00 m above the ground is approximately 2.56 J (Joules).
To know more about kinetic energy
https://brainly.com/question/999862
#SPJ2
For a spherical surface with radius 0.17 m and is charged by 25 nC, the electric Potential V at r = 0.37 m is (in V)
Select one:
O a.o
O b. 1324
O c. 7785
O d. 1644
B
O e. 608
Answer:
E = k q1 q2 / r^2 electric potential
E / q1 = k q2 / r^2 = 9 * 10E9 * 25 * E-9 / ,37^2 = 1644 V
(Gauss Law - charge of sphere equivalent to charge at center)
On a frictionless horizontal surface, a 1.50 kg mass traveling at 3.50 m/s collides with and sticks to a 3.00 kg mass that is initially at rest.This system then runs into an ideal spring of force constant 50.0 N/cm.
Answer:
√ [tex]\frac{3}{5} m[/tex]
Explanation:
Hope it helps!.
The change in the length of the spring will be 3.5 cm.Principal of the law of conservation of the momentum is applied in the problem.
What is the law of conservation of momentum?According to the law of conservation of momentum, the momentum of the body before the collision is always equal to the momentum of the body after the collision.
According to the law of conservation of momentum;
Momentum before collision =Momentum after collision
Speed after impact is;
[tex]\rm v = \frac{(1.50)(3.5)}{(1.50)+(3)} \\\\ v= 1.1666 \ m/sec[/tex]
From the law of conservation of energy:
[tex]\rm \frac{1}{2} kx^2= \frac{1}{2} (m+M)v^2 \\\\ x= \sqrt{\frac{M+m}{k} } \\\\ x=\sqrt{\frac{4.5}{5000 } }(1.1666)\\\\ x= 0.35 \ m \\\\ x=3.5 \ cm[/tex]
The change in the length of the spring will be 3.5 cm.
To learn more about the law of conservation of momentum refer;
https://brainly.com/question/1113396
#SPJ2
A roller coaster weighing 2000 kg is lifted to a height of 28 m within 30 seconds with a kind of elevator.Calculate how many kilowatts of power the elevator has to deliver.
Answer:
Explanation:
The equation for Power is
P = Work/time to do work and the equation for work is
Work = FΔx
We first need to find the amount of work done, then we can find the power it took to do that work.
W = 2000(9.8)(28) so
W = 550,000 N*m
Now we fill that into the power equation:
[tex]P=\frac{550000}{30}[/tex] gives us
P = 18000 Watts. But we need kW, so we divide by 1000 to get
P = 18 kW of power.
Answer:
18.293 kilowatts
Explanation:
Given that, mass (m) = 2000 kg
Height (h) = 28m
Time(t) = 30 seconds
To find: power required in kilowatts
Now required work done will be m*g*h
= 2000*9.8*28=548800 newton
Now power required is given by (P) = work done /(time taken)
= 548800/30 = 18293.333 watts
= (18293.333 / 1000) kilowatts
= 18.293 kilowatts.
A stone was dropped off a cliff and hit the ground with a speed of 136 ft/s. What is the height of the cliff
Answer:
Explanation:
Use the equation
[tex]v^2=v_0^2+2a[/tex]Δx
In this dimension (the y dimension...the only one we have to care about for this problem), here's what we know:
a = -32 ft/s/s
v₀ = 0 m/s (since someone was holding the stone still before it was dropped)
v = 136 ft/s
Δx = ??
Filling in:
[tex]136^2=0^2+2(-32)[/tex]Δx so
Δx = [tex]\frac{136^2}{2(-32)}[/tex] so
Δx = -289 feet (negative because the stone dropped that many feet below the point from which it was dropped, but you would answer a height question with the positive of this number. If you were asked how far the stone dropped, it would be negative; if you're asked how tall the cliff is, that would be positive)
which of the following is a correct statement. a. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are constant. b. In dc steady state conditions, the voltages across the capacitors are zero and the currents through the capacitance are constant. The current through the inductors are constant and the voltage across the inductances are zero. c. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are zero and the voltage across the inductances are constant. d. WIn dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
Answer:
d. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
Explanation:
The current through a capacitor is given by i = CdV/dt where C = capacitance of capacitor and V = voltage across capacitor. At steady state dV/dt = 0 and V = constant. So, i = CdV/dt = C × 0 = 0.
So, in dc steady state, the voltage across a capacitor is constant and the current zero.
The voltage across an inductor is given by V = Ldi/dt where L = inductance of inductor and i = current through inductor. At steady state di/dt = 0 and V = constant. So, V = Ldi/dt = L × 0 = 0.
So, in dc steady state, the voltage across an inductor is zero and the current constant.
So, In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
The answer is d.
turn this scentence to repirted speach.
i ate icecream
She said that..........
Answer:
dhfhffuththt9tr8tujtngigjtjrjrjrurur
what change occurs to the mass of an object when a unbalanced
Answer:
The mass decreases
Explanation:
Just smart
voltage needed to raise current to 3.75a using 20,20,200 resistor set
Answer: The voltage needed is 35.7 V
Explanation:
Assuming that the resistors are arranged in parallel combination.
For the resistors arranged in parallel combination:
[tex]\frac{1}{R}=\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3}[/tex]
We are given:
[tex]R_1=20\Omega\\R_2=20\Omega\\R_3=200\Omega[/tex]
Using above equation, we get:
[tex]\frac{1}{R}=\frac{1}{20}+\frac{1}{20}+\frac{1}{200}\\\\\frac{1}{R}=\frac{10+10+1}{200}\\\\R=\frac{200}{21}=9.52\Omega[/tex]
Calculating the voltage by using Ohm's law:
[tex]V=IR[/tex] .....(1)
where,
V = voltage applied
I = Current = 3.75 A
R = Resistance = [tex]9.52\Omega[/tex]
Putting values in equation 1, we get:
[tex]V=3.75\times 9.52\\\\V=35.7V[/tex]
Hence, the voltage needed is 35.7 V
There are six different ways to arrange those resistors.
Each way leads to a different answer.
You didn't tell us how you want them connected.
The attached drawing shows them all.
ou charge a piece of aluminum foil (mass = 4.99 g) by touching it to a charged rod. The charged rod gives the aluminum foil a charge of 13 µC. Your professor brings a charged plate over and tells you to put the aluminum foil on top of the plate. To your surprise the aluminum foil hovers motionless in the air above it! Calculate the value of the electric field from the charged plate (assume it is a uniform field and the aluminum foil is a point charge).
Answer:
The appropriate answer is "3761.69 N/C".
Explanation:
Given that:
Mass,
m = 4.99 g
or,
= [tex]4.99\times 10^{-3} \ kg[/tex]
Charge,
q = 13 µC
or,
= [tex]13\times 10^{-6} \ C[/tex]
As we know,
⇒ [tex]F=mg=Eq[/tex]
then,
⇒ [tex]E=\frac{mg}{q}[/tex]
By putting the values, we get
[tex]=\frac{4.99\times 10^{-3}\times 9.8}{13\times 10^{-6}}[/tex]
[tex]=3761.69 \ N/C[/tex]
What is a quasar made of?
Answer: A quasar is an exceptionally bright active galactic nucleus (AGN) containing a supermassive black hole surrounded by a gaseous accretion disk with a mass ranging from millions to billions of times that of the Sun.
Explanation: Energy is emitted in the form of electromagnetic radiation when gas in the disk descends towards the black hole, which can be seen across the electromagnetic spectrum.
13. How many electrons does a complete third electron shell hold?
Answer:
A) 8A complete third electron shell holds 8 electrons
---------------------------
hope it helps...
have a great day!!
Answer:
8
Explanation:
LC-circuit of the radio receiver consists of variable capacitor (Cmin= 1 pF, Cmax=10 pF) and inductor
with inductance 1 µH. Determine the wavelength range of this radio receiver.
Answer:
the radio can tune wavelengths between 1.88 and 5.97 m
Explanation:
The signal that can be received is the one that is in resonance as the impedance of the LC circuit.
X = X_c - X_L
X = 1 / wC - w L
at the point of resonance the two impedance are equal so their sum is zero
X_c = X_L
1 / wC = w L
w² = 1 / CL
w = [tex]\sqrt{\frac{1}{CL} }[/tex]
let's look for the extreme values
C = 1 10⁻¹² F
w = [tex]\sqrt{\frac{1}{ 1 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]
w = [tex]\sqrt{1 \ 10^{18}}[/tex]
w = 10⁹ rad / s
C = 10 10⁻¹² F
w = [tex]\sqrt{\frac{1}{10 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]Ra 1/10 10-12 1 10-6
w = [tex]\sqrt{0.1 \ 10^{18}}[/tex]Ra 0.1 1018
w = 0.316 10⁹ rad / s
Now the angular velocity and the frequency are related
w = 2π f
f = w / 2π
the light velocity is
c = λ f
λ = c / f
we substitute
λ = c 2π/w
we calculate the two values
C = 1 pF
λ₁ = 3 10⁸ 2π / 10⁹
λ₁= 18.849 10⁻¹ m
λ₁ = 1.88 m
C = 10 pF
λ₂ = 3 10⁸ 2π / 0.316 10⁹
λ₂ = 59.65 10⁻¹ m
λ₂ = 5.97 m
so the radio can tune wavelengths between 1.88 and 5.97 m
9. What part of the eye contains muscles that regulate the amount of light that is allowed to enter the eye?
Answer: the iris
Explanation: I looked it up
Answer:
Iris
Explanation:
Because (iris) has muscles that can expand/contract depends to the amount of light that pupil needs to process/figure out images.
after landing aeroplane moment become zero how's?
Answer:
So logically speaking the question you have asked makes no sense
Explanation:
Zero what? After landing where? How what? before asking a question think about how other people will read it.
