Answer:
105 g.m/s
Explanation:
The law of conservation of momemtum states that initial momemtum is equal to final momentum.
initial momentum of orange ball = 165 g.m/s
initial momentum of green ball = 0 g.m/s
final momentum of orange ball = 60 g.m/s
final momentum of green ball = x
165+0=60+x
⇒x = 165-60= 105 g.m/s
the momentum of the green ball right after the collision =105 g.m/s
Question 3 of 10
Which law is stated below?
The acceleration of an object is proportional to the force applied to it and
inversely proportional to its mass.
A. The law of inertia
B. Newton's first law
C. Newton's third law
D. Newton's second law
Answer:
D. Newton's second law
Explanation:
Newton's second law of motion states that force of an object is a product of its mass and its acceleration.
Mathematically, F= ma where m is mass and a is acceleration
So from the statement above : The acceleration of an object is proportional to the force applied to it and inversely proportional to its mass , it can be seen from the formula variation as;
F= ma -----making a the subject of the formula
a= F/ m
a= 1/m * F --------- a is inversely related to m as you can see from 1/m but directly related to F hence;
Increase in mass with the same force applied causes the body to accelerate slower where as when force increases, the body accelerates faster.
Dexter Eius is running through the cafeteria when he slips on some mashed potatoes and falls to the floor. (Let that be a lesson for Dexter.) Dexter lands in a puddle of milk and skids to a stop with an acceleration of -4.8 m/s/s. Dexter weighs 780 Newtons. Determine the coefficient of friction between Dexter and the milky floor.
Answer:
μ = 0.49
Explanation:
For this exercise we can use Newton's second law
Y Axis
N - W = 0
N = W = mg
X axis
-fr = ma
the equation for the friction force is
fr = μ N
we substitute
-μ m g = ma
μ = -a / g
we calculate
μ = 4.8 / 9.8
μ = 0.49
in physics, the use of force to move an object is called
Answer:
In physics, work means the use of force to move an object. ... Not all force that is used to move an object does work. For work to be done, the force must be applied in the same direction that the object moves
The use of force to move an object is called Work.
A force can change the motion of an object. A force causes an object with mass to change its velocity (acceleration).
[tex]\bold{Force = Mass\times acceleration}[/tex]
while work is the result of the action when a force causes an object to move in the direction of the force.
[tex]\bold{Work= Force\times Displacement}[/tex]
Therefore, the use of force to move an object is called Work.
To know more visit:
https://brainly.com/question/4095205
why do prescribed drugs need to be prescribed by doctors what can happen if you abuse these drugs without a pressure?
Answer:
unperscriebed drugs can e harmful to your body
Explanation:
What type of matter is likely to absorb the most sound waves
Answer:
Things like cloth and softmaterial, pliable, or porous materials
Explanation:
Answer:
Porous absorbers e.g paper, cardboards
this is the last question
Answer:
It's C
Explanation:
Pls Solve this!!!Im giving 20 points and Brainliest to the one who answers first. HELP ME PLEASE!!!!!!!!
Answer:
i) 2Mg + O₂ + Δ Heat → 2MgO + Δ Energy
ii) The aqueous solution does not change in the color of the blue litmus paper and the blue litmus paper remains blue in color
The aqueous solution formed using the product (MgO) turns the red litmus paper blue
Explanation:
i) Magnesium easily burns in air or oxygen when heated to form a white powder of magnesium oxide. The burning (reaction) of magnesium in air is an exothermic reaction that involves the release of heat and light
The burning of magnesium wire is given by the following chemical reaction;
2Mg + O₂ + Δ Heat → 2MgO + Δ Energy
ii) When magnesium oxide is mixed with water if forms magnesium hydroxide Mg(OH)₂ as shown in the following chemical reaction;
MgO + H₂O → Mg(OH)₂
Magnesium hydroxide is basic and therefore it will turn red litmus paper blue and it does not change the color of the blue litmus paper.
Which of the following is an example of kinetic energy?
athlete running in a race
battery charging in a garage
apple hanging from a tree
water boiling on a stove
Answer:
A. Athlete running in a race
Explanation:
Kinetic energy haves something to do with movement
is cereal a soup? explain why or why not
Answer:
no
Explanation:
because its cold
soup is hot
define watt and write how much watt is equal to one horse power
Answer:
A watt (W) is a joule (J) of energy used or produced per second. In 2010, the average US power use was 3.3 terawatts, or 3,300,000,000,000 watts. A horsepower is a unit of power. 1 horsepower (hp) is 745.7 watts.
extra info
How many watts does it take to make 1 horsepower?
746 watts !
One electric horsepower is equal to exactly 746 watts.
can someone help me with my qustions :(
5. Annie drags her little red wagon with a mass of 5.00 kg, up a hill that has an angle of
elevation of 30.09. She applies the force of 150 N parallel to the incline. Assume that
the wagon starts from rest at the bottom of the hill, and neglect friction (4 points)
a) What is the value of the acceleration of the wagon?
Answer: [tex]25.08\ m/s^2[/tex]
Explanation:
Given
mass of wagon m=5 kg
elevation
[tex]\theta =30.9^{\circ}\\F=150\ N[/tex]
Sin component of weight will oppose the applied force therefore we can write
[tex]F-W\sin \theta=ma\\where\\W=weight(mg)\\a=acceleration[/tex]
[tex]150-5\times 9.8\times \sin (30.09)^{\circ}=5\times a\\125.43=5a\\a=25.08\ m/s^2[/tex]
A sound wave traveling through dry air has a frequency of 16 Hz, a
wavelength of 22 m, and a speed of 350 m/s. When the sound wave passes
through a cloud of methane, its wavelength changes to 28 m, while its
frequency remains the same. What is its new speed? (The equation for the
speed of a wave is v= f x.)
A. 350 m/s
B. 9,800 m/s
C. 450 m/s
D. 13 m/s
Answer:
C. 450
it should be right
The new speed of sound wave is 450 m/s. Hence, option (C) is correct.
What is sound wave?A sound wave is the pattern of disruption brought on by the movement of energy moving through a medium as it propagates away from the source of the sound (such as air, water, or any other liquid or solid matter).
Pressure waves are produced when an object vibrates, such as a ringing phone, and these waves are known as sound waves.
Frequency of sound wave is = 16 Hz.
Wavelength of the sound wave is = 28 m.
Hence, new speed of sound wave is = 16 × 28 meter/second
= 448 meter/second
=450 meter/second. (approx.)
Learn more about sound wave here:
https://brainly.com/question/21995826
#SPJ5
Glider A of mass 0.355 kg moves along a frictionless air track with a velocity of 0.095 m/s. It collides with glider B of mass 0.710 kg moving in the same direction at a speed of 0.045 m/s. After the collision, glider A continues in the same direction with a velocity of 0.035 m/s. What is the velocity of glider B after the collision?
Answer:
vB' = 0.075[m/s]
Explanation:
We can solve this problem using the principle of linear momentum conservation, which tells us that momentum is preserved before and after the collision.
Now we have to come up with an equation that involves both bodies, before and after the collision. To the left of the equal sign are taken the bodies before the collision and to the right after the collision.
[tex](m_{A}*v_{A})+(m_{B}*v_{B})=(m_{A}*v_{A'})+(m_{B}*v_{B'})[/tex]
where:
mA = 0.355 [kg]
vA = 0.095 [m/s] before the collision
mB = 0.710 [kg]
vB = 0.045 [m/s] before the collision
vA' = 0.035 [m/s] after the collision
vB' [m/s] after the collison.
The signs in the equation remain positive since before and after the collision, both bodies continue to move in the same direction.
[tex](0.355*0.095)+(0.710*0.045)=(0.355*0.035)+(0.710*v_{B'})\\v_{B'}=0.075[m/s][/tex]
You look at yourself in the mirror and notice many of your physical features: your hair color, eye color, your height, dimples, etc. How does DNA relate to the way you look the way you do?
well, you get some DNA from both of your parents, so when you hear the phrase, "You have your mother's eyes!" That means you have some of your mother's DNA that gave you her eye color. The DNA you get from your parents help determine how you look today
Who would like to be my girlfiend ?
nobody this is a app to help others
Answer:
I bet my great grandmother would
I am giving 18 points. Please try and don’t just do it for the points.
They won’t let me shown the very last picture, it looks like the normal L shape that is in every picture, and just one straight line. L—
Like that.
Which of the following graphs below represents the motion of an object at variable speeds? (3 points)
Distance
(miles)
Time
(hours)
Distance
(miles)
Time
(hours)
Answer:Distance.
Explanation:
where should i graph the distance in a distance time graph
Answer:
Distance in Y axis and Time in axis
Answer:
the distance should be on the Y axis (vertical) and the time should be on the X axis (horizantial)
How do I find the change in velocity of a hockey puck?
Mass=0.1697 kg btw
Answer:The foot exerts a force on the ball during a well-defined
duration t (time extent of the contact)
Explanation:
Susan makes the following entry in her notebook: “On Friday we were given a blue liquid in a shallow container. We placed it on the windowsill over the weekend. On Monday morning, there was no liquid left, but the dish had some solid blue stuff in it.”
a. Was the blue liquid in the dish a heterogenous mixture, a solution, or a pure substance? Explain your choice.
b. Write a few sentences about what you think happened in the dish.
Answer:
Explanation:
a. From the information provided in the question, the blue liquid is a solution. This is because a solution is a type of homogeneous mixture (that has an evenly distributed solute in a solvent) which is the reason the liquid was said to be blue (and not immiscible blue solid in a liquid) but after been exposed to heat became just a blue solid. Typically, a solution has a solute and a solvent (combined), the solute here is the blue solid while the solvent is the liquid that made the combination a liquid.
b. Since the dish containing the liquid was placed on a windowsill, it can be assumed that the dish was subjected to heat from the sun which caused the liquid (in the solution) to evaporate after exposure to the heat from the sun (over the weekend) leaving the blue solid solute (of the solution) to remain in the dish. This can be referred to as evaporation to dryness in separation techniques (if the goal was to intentionally separate the solid solute from the liquid solvent).
A sailboat sits tied up at the dock.
Which forces are acting on it?
(A)
applied force and tension force
(B)
electrical force and applied force
(C)
gravity and electrical force
(D)
tension force and gravity
Answer:B
Explanation:i think so im not suree
A sailboat that is tied up at the dock will experience tension force and gravity. Therefore, option (D) is correct.
What is the tension force?Tension can be described as a force acting along the flexible length of a medium such as a rope, string, or cable, or a force carried by a flexible medium.
Tension can be defined as an action-reaction pair acting at each end of the elements. For a rope, tension is present in every section of the rope or string in both directions, apart from their endpoints. Each endpoint of the rope will experience tension and force from the weight attached to it.
Tension can also be defined as a pulling force but the tension is not a pushing force. Ropes or strings are used to exert forces since they transfer a force over a specific distance.
Therefore, sailboats experience the tension force due to the rope with which it is tied at the dock and the force due to gravity.
Learn more about tension, here:
brainly.com/question/13676406
#SPJ2
why does the fire snake weight less than it was when it was on fire
Answer:
When Zoe weighs the ingredients (sugar and baking soda), it weighs 25 grams in total. When she weighs the “snake” it weighs 23 grams. This is because some carbon dioxide gas produced during the chemical reaction escapes into the air.
PLZZZ HELP
In addition to how much force Earth exerts on the object, which features of an object affect its weight?
A.mass and location of the object
B.shape and location of the object
C.location of the object and how much energy the object has
D.mass of the object and how much energy the object has
Answer/Explanation:
The weight of an object is defined as the force that is exerted due to the gravitational force.
Mathematically, it can be written as :
W = m g
Where
m is the mass of the object
g is the acceleration due to gravity
Also,
We know that the value of g varies with respect to the location. At the equator, the value of g is less as compared to the poles.
The feature of an object that affects its weight are :
Mass of the object
Location of the object
How much force Earth exerts on the object
An object completes 10 cycles in 50s.
a. What is the period of its rotation?
b. What is the frequency of its rotation?
Answer:
.
Explanation:
Explanation:
Given parameters:
Number of cycles = 10cycles
Time taken = 50s
Unknown:
Period of its rotation = ?
Frequency of its rotation = ?
Solution:
The period of rotation is the time taken time taken for a body to complete a number of rotation;
Period = [tex]\frac{t}{n}[/tex]
t is the time
n is the number of cycles
Period = [tex]\frac{50}{10}[/tex] = 5s
The period is 5s
Now, frequency is the inverse of period;
F = [tex]\frac{1}{period}[/tex] = [tex]\frac{1}{5}[/tex] = 0.2Hz
12. What is the photoelectric effect, and what experimental evidence led scientists
to discover it? Does this support the wave or particle theory of light? Why?
Answer:
Photoelectric effect, phenomenon in which electrically charged particles are released from or within a material when it absorbs electromagnetic radiation.
Explanation:
The effect is often defined as the ejection of electrons from a metal plate when light falls on it. In a broader definition, the radiant energy may be infrared, visible, or ultraviolet light, X-rays, or gamma rays; the material may be a solid, liquid, or gas; and the released particles may be ions (electrically charged atoms or molecules) as well as electrons. The phenomenon was fundamentally significant in the development of modern physics because of the puzzling questions it raised about the nature of light—particle versus wavelike behaviour—that were finally resolved by Albert Einstein in 1905. The effect remains important for research in areas from materials science to astrophysics, as well as forming the basis for a variety of useful devices.
The emission of electrons from the surface of a metal by the action of light is called photoelectric effect. This phenomenon indicates the behavior of light as particles called photons.
What is photoelectric effect ?The phenomenon of ejection of electrons from the surface of a metal when light of a suitable frequency falls on it is called photoelectric effect. Upon striking the surface of metals , light can set up an electric current which current which corresponds to the flow of electrons. This phenomenon is discovered by Einstein
For instance, visible light can cause ejection of electrons from the surface of metal like cesium which has low ionization enthalpy. This phenomenon is related to the observation that if light is considered as particles.
The particles of light is then called as photoelectrons or photons. Photoelectric effect find application in photoelectric cells used in colorimetry, spectrophotometers etc.
Find more on photoelectric effect:
https://brainly.com/question/26465043
#SPJ6
Which circuit shows three resistors connected in series?
The circuit shows three resistors connected in series is the letter B because he elements are connected on the same wire and there is only one path for the electric current to flow.
What is the difference between series and parallel circuit?The main difference between series and parallel circuit is the way voltage and current are presented. The voltage will be the same at all points in the parallel circuit and the current will vary. In series circuit, it is the voltage that can be different, while the electric current is the same.
In a series electric circuit, the elements are connected on the same wire and there is only one path for the electric current to flow. For this reason, the electric current is the same in all elements of the circuit.
See more about series eletric circuit at brainly.com/question/11853598
How can shorter string produce more fundamental frequency in two string of different length?
Answer:
Shorter string produces more frequency in two different strings because the equation for frequency is velocity/wavelength , this means that a shorter string creates a shorter wavelength which essentially increases the total frequency produced
A 1 kg box is sitting on a flat horizontal surface that has a coefficient of static friction value of 0.8. What answer best states the minimum force required to move the box in the horizontal direction?
A. >-9.8N
B. >9.8N
C. >7.84N
D. >9N
The normal force felt by the box has magnitude
F[normal] = (1 kg) g = 9.8 N
so that the maximum magnitude of static friction is
F[s. friction] = 0.8 F[normal] = 7.84 N
In order to get the box to move, (C) a minimum force of 7.84 N is required.
Increase or decrease? 35 points ??? Please help
Answer:
increase, GPE, KE, KE, KE, PE, PE, KE, KE,
Explanation:
The shortstop plays between first and second base.
true or false
SINGLE TO RIGHT OR CENTER FIELD-On a single to center or right field the first baseman will be the cutoff to home. The shortstop will cover second base.
A ‘thermal tap’ used in a certain apparatus consists of a silica rod which
fits tightly inside an aluminium tube whose internal diameter is 8mm at
0
0C. When the temperature is raised, the fit is no longer exact. Calculate
what change in temperature is necessary to produce a channel whose
cross-section is equal to that of a tube of 1mm internal diameter. (linear
expansivity of silica = 8X10-6
/K and linear expansivity of aluminium =
26X10-6
/K )
Correct question is;
A thermal tap used in a certain apparatus consists of a silica rod which fits tightly inside an aluminium tube whose internal diameter is 8mm at 0°C.When the temperature is raised ,the fits is no longer exact. Calculate what change in temperature is necessary to produce a channel whose cross-sectional is equal to that of the tube of 1mm. (linear expansivity of silica = 8 × 10^(-6) /K and linear expansivity of aluminium = 26 × 10^(-6) /K).
Answer:
ΔT = 268.67K
Explanation:
We are given;
d1 = 8mm
d2 = 1mm
At standard temperature and pressure conditions, the temperature is 273K.
Thus; Initial temperature; T1 = 273K,
Using the combined gas law, we have;
P1×V1/T1 = P2×V2/T2
The pressure is constant and so P1 = P2. They will cancel out in the combined gas law to give:
V1/T1 = V2/T2
Now, volume of the tube is given by the formula;V = Area × height = Ah
Thus;
V1 = (πd1²/4)h
V2 = (π(d2)²/4)h
Thus;
(πd1²/4)h/T1 = (π(d2)²/4)h/T2
π, h and 4 will cancel out to give;
d1²/T1 = (d2)²/T2
T2 = ((d2)² × T1)/d1²
T2 = (1² × T1)/8²
T2 = 273/64
T2 = 4.23K
Therefore, Change in temperature is; ΔT = T2 - T1
ΔT = 273 - 4.23
ΔT = 268.67K
Thus, the temperature decreased to 268.67K
