Kendall will find the total surface area of the prism below. Assuming the base is the shaded surface (the bottom), drag an
drop the correct values for the variables P, h, B that she should use in her formula.
1.2 ft
P.⠀
h:
B:
feet
feet
8.8 ft
square feet
nwore mangslugnsits arts to come sostua eri bait of absan y
So
2 ft

Answer:

see the answer and explanation in the attached figure below

Step-by-step explanation:

The degree measure of the largest angle is 72° in the triangle.

We have, The sum of two angles of a triangle is 6/5 of a right angle.

One of these two angles is 30° larger than the other.

Let A and B be the two angles of the triangle such that A = B + 30°.

We know that the sum of three angles in a triangle is 180°.

⇒ A + B + C = 180°

⇒ B + 30° + B + C = 180°

⇒ 2B + C = 150°

We also know that the sum of two angles of a triangle is 6/5 of a right angle.

⇒ A + B = 6/5 × 90°

⇒ B + 30° + B = 108°

⇒ 2B = 78°

⇒ B = 39°

C = 150° - 2B ⇒ 72°

A = B + 30° ⇒ 39° + 30° ⇒ 69°

Therefore, the degree measure of the largest angle in the triangle is 72°.

To know more about the "sum of two angles" of a triangle: https://brainly.in/question/19076450

#SPJ11

The corresponding sides and angles of two polygons ABCD and ZYXW must be proportionate if they are identical.

With straight sides around its perimeter, a polygon is really a circular, two-dimensional, flat of planar structure. Its sides are straight with no bends. Another term for a polygon's sides is its edges. The points at which two sides of a polygon converge are known as its vertices (or corners). These are numerous examples of polygonal geometry.

A closed polygon is a form with more than three sides. A quadrilateral is a 4-sided polygonal shape. A quadrilateral is any closed 4-sided form, however there are six particular quadrilaterals with distinctive characteristics that give them their own names.

To know more about polygons visit:

https://brainly.com/question/24464711

#SPJ1

In response to the stated question, we may state that As a result, the rectangular pyramid has a surface area of 296 ft2. 296 ft2 is the correct answer.

In Euclidean geometry, a rectangle is a parallelogram with four small angles. It may also be defined as a fundamental rule hexagon or one in which all of the angles are equal. Another alternative for the parallelogram is a straight angle. Four of the vertices of a square are the same length. A quadrilateral with four 90° angle vertices and equal parallel sides has a rectangle-shaped cross section. As a result, it is also known as a "equirectangular rectangle" at times. A rectangle is sometimes referred to as a parallelogram due to the equal and parallel dimensions of its two sides.

To determine the surface area of a rectangular pyramid, first calculate the area of each face and then add them together.

Given the rectangular pyramid's dimensions:

Slant height= 10 ft base length (l) = 12 ft base width (w) = 8 foot

Then, calculate the area of the base. The area of the base is simply l w: because it is a rectangle.

Base area = [tex]12 ft x 8 ft = 96 ft^2[/tex]

A triangle face's area equals 1/2 its base height, where base = w or l and height = sh.

[tex]1/2 *8 ft *10 ft = 40 ft^2[/tex] area of the first triangle face

[tex]1/2 *12 ft *10 ft = 60 ft^2[/tex]area of the second triangular face

Third triangular face area = [tex]1/2 *8 ft *10 ft = 40 ft^2[/tex]

The area of the fourth triangular face is equal to [tex]1/2 *12 ft *10 ft = 60 ft^2.[/tex]

Now put the areas of all the faces together to get the entire surface area:

Total surface area = base area + sum of all triangular face areas

Surface area total =[tex]96 ft^2 + (40 ft^2 + 60 ft^2 + 40 ft^2 + 60 ft^2)[/tex]

296 ft2 total surface area

As a result, the rectangular pyramid has a surface area of 296 ft2.

296 ft2 is the correct answer.

To know more about rectangle visit:

https://brainly.com/question/29123947

#SPJ1

To design a cylindrical can (with a lid) to contain 1 liter (= 1000 cm3) of water, using the minimum amount of metal, we need to consider the following parameters:Height and Diameter of the canThickness of the metalMaterial used for making the canLet's assume we use Aluminium as a material. Now, let's start designing the can:Height of the can:

Volume of water = 1000 cm3Volume of cylinder = πr²hVolume of cylinder = π (d/2)² hVolume of cylinder = π (d²/4) hVolume of cylinder = 1000 cm³π (d²/4) h = 1000 cm³d²h = 4000 cm³h = (4000 cm³) / (π d²) h = (4000 cm³) / (3.14 * d²) h = (1273.24) / d²Diameter of the can:

Volume of cylinder = πr²hVolume of cylinder = π (d/2)² hVolume of cylinder = π (d²/4) hVolume of cylinder = 1000 cm³π (d²/4) h = 1000 cm³d²h = 4000 cm³d² = (4000 cm³) / h d² = (4000 cm³) / (1273.24/d²) d² = 3.1425d = 17.8 cmThickness of the metal:We can assume the thickness to be 0.5 mm.Material used for making the can:AluminiumTotal Surface Area of the can:Total Surface Area of cylinder = 2πrhTotal Surface Area of cylinder = 2π(d/2)(1273.24/d²)Total Surface Area of cylinder = 1273.24/d Total Surface Area of lid = πr²Total Surface Area of lid = π (d/2)²Total Surface Area of lid = π (17.8/2)²Total Surface Area of lid = 248.5Total Surface Area of the Can = 1273.24/d + 248.5Now, we can calculate the minimum amount of Aluminium required to make the can by minimizing the Total Surface Area of the can.Total Surface Area of the can = 1273.24/d + 248.5d (in cm)Total Surface Area of the can = 1273.24/7.09 + 248.5(7.09)Total Surface Area of the can = 584.24Therefore, the minimum amount of Aluminium required to make the can is 584.24 cm².

for such more questions on Total Surface Area

https://brainly.com/question/31186196

#SPJ11

45.53 ,fencing is needed to build the fence.

A solid object's surface area is a measurement of the total area that the surface of the object takes up.

The definition polyhedra of arc length for one-dimensional curves and the definition of surface area for (i.e., objects with flat polygonal faces), where the surface area is the sum of the areas of its faces, are both much simpler mathematical concepts than the definition of surface area when there are curved surfaces.

A smooth surface's surface area is determined using its representation as a parametric surface, such as a sphere.

This definition of surface area uses partial derivatives and double much simpler mathematical concepts than the definition of surface area integration and is based on techniques used in infinitesimal calculus.sought a general definition of surface area.



Henri Lebesgue and Hermann Minkowski at the turn of the century sought a general definition of surface area.

2*3.14*14.5/2

45.53ft

learn more about area click here:

brainly.com/question/16519513

#SPJ1

The required value of the base of the triangle is   [tex]\frac{7\sqrt{3} }{3}[/tex].

Right-angle triangles are formed when the angle formed by two of their edges is exactly 90 degrees. Obtuse angle triangle: An obtuse angle triangle is one in which the angle formed by two sides is larger than 90 degrees.

In the given triangle, we will use tangent function to find the value of x.

tan(∅) = Perpendicular/ base

tan(60°) = 7/x

x = 7/tan(60°)

x = 7/√3                         ∴ (tan(60°) =√3  )

On rationalizing

x = [tex]\frac{7\sqrt{3} }{3}[/tex]

Thus, required value of x is [tex]\frac{7\sqrt{3} }{3}[/tex].

To know more about Triangle visit:

brainly.com/question/2773823

#SPJ1

There are, 6300 different possibilities for the researcher’s study.

Total number of class I railroads = 10Number of class I railroads selected = 3Total number of class II railroads = 6Number of class II railroads selected = 2Total number of class III railroads = 5Number of class III railroads selected = 1Number of different possibilities for selecting 3 class I railroads from 10 class I railroads = 10C3 = (10 x 9 x 8)/(3 x 2 x 1) = 120

Number of different possibilities for selecting 2 class II railroads from 6 class II railroads = 6C2 = (6 x 5)/(2 x 1) = 15Number of different possibilities for selecting 1 class III railroad from 5 class III railroads = 5C1 = 5Total number of different possibilities for selecting 3 class I railroads from 10 class I railroads, 2 class II railroads from 6 class II railroads, and 1 class III railroad from 5 class III railroads = 10C3 x 6C2 x 5C1= 120 x 15 x 5= 6300Therefore, there are 6300 different possibilities for the researcher’s study.

See more about calculate possibilities at: https://brainly.com/question/4658834

#SPJ11

Step-by-step explanation:

20% off means you pay 80 % of the original price for two books

80% * ( 2 x 19.95 ) = .8 ( 39.90) = $ 31.92

If the average of three numbers is 16 and one of the numbers is 18, then the sum of the other two numbers is option (d) 30

Let's use algebra to solve this problem. Let x and y be the other two numbers we are looking for. We know that the average of the three numbers is 16, so we can write:

(18 + x + y) / 3 = 16

Multiplying both sides by 3, we get,

[(18 + x + y) / 3] × 3 = 16 ×3

18 + x + y = 48

Subtracting 18 from both sides, we get,

18 + x + y - 18 = 48

x + y = 30

Therefore, the correct option is (d) 30

Learn more about average here

brainly.com/question/1416374

#SPJ4

Answer:

first one

Step-by-step explanation:

The equation that models the future cost of gasoline is y=1.19(1.003)^(x), where "y" represents the future cost of gasoline per gallon and "x" represents the number of months since January 1, 1999.

In this equation, the initial cost of gasoline is $1.19 per gallon, and the cost increases by 0.3% per month, which is represented by the factor of (1.003)^(x).

Using this equation, you can calculate the future cost of gasoline for any number of months after January 1, 1999. For example, if you want to calculate the cost of gasoline 24 months after January 1, 1999, you can plug in x=24 and calculate y as follows:

y = 1.19(1.003)^(24)

y = 1.19(1.08357)

y = 1.288 per gallon

Therefore, the predicted cost of gasoline 24 months after January 1, 1999 is $1.288 per gallon.

At x = -2, which is the vertex of the quadratic function, the function f(x) is constant.

To classify the graph of a function as increasing, decreasing, or constant, you need to examine the direction in which the graph is moving.

x = -2 is the vertex of the quadratic function, which is the turning point of the function, where it changes from increasing to decreasing, hence the function is considered to be constant at x = -2, as it has a derivative of zero at x = -2.

More can be learned about functions at https://brainly.com/question/24808124

#SPJ1

the prime factors of 24 are 2 and 3, which combine to give the unique prime factorization of 24 as 2^3 × 3.

There are no factors of 24 that are prime numbers. A factor of a number is a whole number that divides that number without leaving a remainder. Prime numbers, on the other hand, are numbers that are divisible only by 1 and themselves, and cannot be expressed as the product of any other numbers.

The prime factors of 24 are 2, 2, and 3. We can factorize 24 as 2 × 2 × 2 × 3 or 2^3 × 3. Here, 2 and 3 are both prime numbers, but they are not factors of 24 in isolation. They are only prime factors of 24 when combined in the manner shown.

This fact highlights an important concept in number theory: the uniqueness of prime factorization. Every composite number can be expressed as a unique product of prime numbers. This fundamental theorem of arithmetic is crucial in many areas of mathematics, including cryptography, where it is used to secure communications and protect sensitive information.

In summary, there are no factors of 24 that are prime numbers. However, the prime factors of 24 are 2 and 3, which combine to give the unique prime factorization of 24 as 2^3 × 3.

To know more about prime factorization click here:

brainly.com/question/29763746

#SPJ4

Suppose a population grows according to a logistic model with initial population 200 and carrying capacity 2,000. If the population grows to 500 after one year, the population will be 852.78 after another three years.

A logistic model, also known as the Verhulst-Pearl model, is a type of function used to describe population growth that is limited. It’s a form of exponential growth that takes into account the carrying capacity of an environment.

Population growth that is limited and slows down as the population approaches its carrying capacity is modeled using the logistic model. It is given by this equation:

[tex]P(t) = K / (1 + Ae^{-rt})[/tex]

where P(t) is the population at time t, K is the carrying capacity, A is the constant of proportionality, and r is the growth rate.

Suppose a population grows according to a logistic model with initial population 200 and carrying capacity 2,000. If the population grows to 500 after one year, substitute this information into the logistic model: [tex]P(1) = 500[/tex], [tex]K = 2000[/tex], and [tex]P(0) = 200[/tex].

[tex]500 = 2000 / (1 + Ae^{-r(1)})[/tex]

Now, solve for A by dividing both sides by 2000 / (1 + A):

[tex]1 + A = 4A = 3[/tex]

Substitute the value of A back into the logistic model equation:

[tex]P(t) = 2000 / (1 + 3e^{-rt})[/tex]

Solve for r by using the data provided in the problem for the first year (t = 1) and second year (t = 4):

[tex]P(1) = 500 = 2000 / (1 + 3e^{-r(1)})[/tex]

[tex]P(4) = ? = 2000 / (1 + 3e^{-r(4)})[/tex]

Solve the first equation for r:

[tex]500 = 2000 / (1 + 3e^{-r})\\1 + 3e^{-r} = 4e^{-r}\\1 + 3e^r = 4e[/tex]

Solve for e using the quadratic formula to get:

e = 0.4274 and e = 1.1713

Let e = 0.4274:

[tex]1 + 3e^{-r} = 4e^{-r}\\1 + 3(0.4274)^{-r} = 4(0.4274)^{r}\\1 + 0.5746^r = 1.7166^r[/tex]

Take the natural logarithm of both sides:

[tex]ln(1 + 0.5746^r) = ln(1.7166^r) - lnr\\ln(1 + 0.5746^r) = rln(1.7166) - lnr[/tex]

Use a graphing calculator to solve for r:

[tex]ln(1 + 0.5746^r) = rln(1.7166) - lnr[/tex];  -0.1568 < r < 0.7534

Solve for r using the second year’s data:

[tex]2000 / (1 + 3e^{-r(4)}) = P(4)\\2000 / (1 + 3(0.4274)^{-r(4)}) = P(4)\\P(4) = 852.78[/tex]

Thus, the population will be 852.78 after another three years.

Learn more about logistic model here:

https://brainly.com/question/30995760

#SPJ11

Runners and sprinters could be on the track team is 25 distance.

Distance:

Distance is a qualitative measurement of the distance between objects or points. In physics or common usage, distance can refer to a physical length or an estimate based on other criteria (such as "more than two counties"). The term Distance is also often used metaphorically to refer to a measure of the amount of difference between two similar objects.

According too the Question:

Based on the based Information:

15× 5÷3

canceling all the common factor, we get:

5 × 5 = 25

Now, the Product or Quotient is 25.

Learn more about Distance:

https://brainly.com/question/15172156

#SPJ4

Answer:

Step-by-step explanation:

A graph is proportional if the relationship between the two variables represented on the axes is constant, meaning that if one variable increases, the other variable also increases by the same factor. In other words, the graph forms a straight line that passes through the origin.

To find the unit rate, you need to look for the constant of proportionality, which is the ratio between the two variables represented on the graph. In this case, the variables are the number of books purchased and the cost in dollars.

If the graph is proportional, then the unit rate is the constant of proportionality, which is the cost per book. You can find the unit rate by dividing the total cost by the number of books purchased. For example, if the total cost for 4 books is $16, then the unit rate would be $4 per book.

If the graph is not proportional, then there is no constant of proportionality, and the unit rate cannot be calculated. The relationship between the two variables may be nonlinear, meaning that the rate of change between the variables is not constant.

Then we will get the following odds

a.  None will have high blood pressure. Let the probability of having high blood pressure be denoted by P(A) and the probability of not having high blood pressure be denoted by P(A'). Since none will have high blood pressure, it means all the sixteen Americans selected are healthy, and therefore P(A') = 1. Therefore

P(A) = 1 - P(A')= 1 - 1= 0

b. One-half will have high blood pressure. The probability that one-half of the sixteen Americans will have high blood pressure can be found using the binomial distribution formula that is given by the expression

[tex]P(X = r) = (nCr) * p^r * q^{(n-r)}[/tex]

Where

Therefore

[tex]P(X = 8) = (16C8) * 0.2^8 * 0.8^8= 0.202[/tex]

c. Exactly 4 will have high blood pressure Similarly, the probability that exactly four of the sixteen Americans will have high blood pressure can be found using the binomial distribution formula as follows:

[tex]P(X = r) = (nCr) * p^r * q^{(n-r})[/tex]

Where

Therefore

[tex]P(X = 4) = (16C4) * 0.2^4 * 0.8^{12}= 0.236[/tex]

See more about probability at: https://brainly.com/question/13604758

#SPJ11

Using equations we know that 45 pounds are included in the $1.40 worth of groceries and 55 pounds worth of groceries are being purchased for 40 cents.

An equation is a mathematical statement that contains the symbol "equal to" between two expressions with identical values.

As in 3x + 5 = 15, for example.

There are many different types of equations, including linear, quadratic, cubic, and others.

So, we have:

x + y = 100                        .........A

40 × x + 140 y = 85 × 100

40 x + 140 y = 8500         ........B

Solving (A) and (B) as follows:

(40 x + 140 y) - 40 × ( x + y ) = 8500 - 40 × 100

(40 x - 40 x) + (140 y - 40 y) = 8500 - 4000

0 + 100 y = 4500

y = 4500/100

Hence, the price per unit of grocery is $1.40 = y = 45 pounds.

Now, put the value of y in equation (A) as follows:

x + y = 100

x = 100 - y

x = 100 - 45

x = 55 pounds

The number of groceries at the 40-cent price is x = 55 pounds.

Therefore, using equations we know that 45 pounds are included in the $1.40 worth of groceries and 55 pounds worth of groceries are being purchased for 40 cents.

Know more about equations here:

https://brainly.com/question/2972832

#SPJ1

Correct question:
A grocer has two kinds of candies, one selling for 40 cents a pound and the other for $1.40 per pound. How many pounds of each kind must he use to make 100 pounds worth 85 cents a pound?

U is a binomial random variable with n trials and probability of success given by 1 - p.

As Y is a binomial random variable with n trials and probability of success given by p. Using the moment-generating functions method, it can be shown that U = n - Y is a binomial random variable with n trials and probability of success given by 1 - p. The binomial distribution is described by two parameters: n, which is the number of trials, and p, which is the probability of success in any given trial. If a binomial random variable is denoted by Y, then:[tex]P(Y = k) = \binom{n}{k}p^{k}(1 - p)^{n-k}[/tex]

The method of generating moments can be used to show that U = n - Y is a binomial random variable with n trials and probability of success given by 1 - p. The moment-generating function of a binomial random variable is given by: [tex]M_{y}(t) = [1 - p + pe^{t}]^{n}[/tex]

The moment-generating function for U is: [tex]M_{u}(t) = E(e^{tu}) = E(e^{t(n-y)})[/tex]

Using the definition of moment-generating functions, we can write: [tex]M_{u}(t) = E(e^{t(n-y)})$$$$= \sum_{y=0}^{n} e^{t(n-y)} \binom{n}{y} p^{y} (1-p)^{n-y}[/tex]

Taking the summation of the above expression: [tex]= \sum_{y=0}^{n} e^{tn} e^{-ty} \binom{n}{y} p^{y} (1-p)^{n-y}$$$$= e^{tn} \sum_{y=0}^{n} \binom{n}{y} (pe^{-t})^{y} [(1-p)^{n-y}]^{1}$$$$= e^{tn} (pe^{-t} + 1 - p)^{n}[/tex]

Comparing this expression with the moment-generating function for a binomial random variable, we can say that U is a binomial random variable with n trials and probability of success given by 1 - p.

To learn more about "Binomial random variable": brainly.com/question/30657837

#SPJ11

The standard deviation of a normal distribution of exam scores is 8. A score that is 12 points above the mean would have a z-score of 1.5, and a score that is 20 points below the mean would have a z-score of -2.5.

The z-score can be calculated by dividing the difference between a data value and the mean of the data set by the standard deviation of the data set.

The z-score of a score that is 12 points above the mean in a normal distribution of exam scores with a standard deviation of 8.

z = (x−μ)/σ = (x−μ)/σ = (12−0)/8 = 1.5

The z-score of a score that is 12 points above the mean in a normal distribution of exam scores with a standard deviation of 8 is 1.5.

The z-score of a score that is 20 points below the mean in a normal distribution of exam scores with a standard deviation of 8.

z = {x-μ}/{σ}  = {-20-0}/{8}  = −2.5

The z-score of a score that is 20 points below the mean in a normal distribution of exam scores with a standard deviation of 8 is -2.5.

Learn more about Z-score here:

https://brainly.com/question/15016913

#SPJ11

From the graph, the feasible region from the system of linear inequalities is the triangular region bounded by the x-axis, the y-axis, the line x + y = 120, the line x = 60, and the line y = 90.

a. Let x be the amount of loam soil (in tons) sold, and y be the amount of peat soil (in tons) sold. The system of inequalities representing the constraints of the problem situation is:

x ≥ 0 (non-negative amount of loam soil)

y ≥ 0 (non-negative amount of peat soil)

x + y ≤ 120 (total amount of soil sold is at most 120 tons)

x ≤ 60 (maximum amount of loam soil available is 60 tons)

y ≤ 90 (maximum amount of peat soil available is 90 tons)

To graph these inequalities, we can plot the feasible region (the region that satisfies all the inequalities) in the x-y plane, as shown below;

The feasible region is the triangular region bounded by the x-axis, the y-axis, the line x + y = 120, the line x = 60, and the line y = 90.

b. The profit function P(x, y) for selling x tons of loam soil and y tons of peat soil is:

P(x, y) = 50x + 75y

To maximize profit, we need to find the values of x and y that satisfy the constraints of the problem situation and maximize the profit function P(x, y). One way to do this is to use the method of linear programming, which involves finding the corner points of the feasible region and evaluating the profit function at each corner point.

The corner points of the feasible region are (0, 0), (60, 0), (60, 60), (30, 90), and (0, 90). Evaluating the profit function at each corner point, we get:

P(0, 0) = 0

P(60, 0) = 3000

P(60, 60) = 9000

P(30, 90) = 6750

P(0, 90) = 6750

Therefore, the maximum profit is $9000, which occurs when the company sells 60 tons of loam soil and 60 tons of peat soil.

learn more on system of linear inequalities here;

https://brainly.com/question/5897935

#SPJ1

Answer:

x² - 49

Step-by-step explanation:

(x - 7)² =

(x - 7) * (x - 7) =

x * x - 7 * 7 =

x² - 49

The values of x such that the graph of f has a horizontal tangent are;x = 2π/3 + 2πn, 4π/3 + 2πn, where n is an integer.

1. The given derivative can be found by finding the first few derivatives and observing the pattern that occurs as shown below;Differentiating sin x with respect to x gives the derivative cos x. Continuing this process, the pattern that emerges is that sin x changes sign for every odd derivative, and stays the same for every even derivative. Therefore the 115th derivative of sin x can be expressed as follows;(d115/dx115)(sin x) = sin x, for n = 58 (where n is an even number)2. To find the values of x such that the graph of f has a horizontal tangent, we differentiate f with respect to x, and then solve for x such that the derivative equals zero. We have;f(x) = x + 2sin xDifferentiating f(x) with respect to x gives;f'(x) = 1 + 2cos xFor a horizontal tangent, f'(x) = 0, thus;1 + 2cos x = 02cos x = -1cos x = -1/2The solutions of the equation cos x = -1/2 are;x = 2π/3 + 2πn or x = 4π/3 + 2πnwhere n is an integer. Therefore the values of x such that the graph of f has a horizontal tangent are;x = 2π/3 + 2πn, 4π/3 + 2πn, where n is an integer.

Learn more about Graph

brainly.com/question/17267403

#SPJ11

Jenny works at Sammy's Restaurant and is paid according to the rates in the following

table.

Jenny's weekly wage agreement

Basic wage $600.00

PLUS

$0.90 for each customer served.

In a week when Jenny serves n customers, her weekly wage, W, in dollars, is given by

the formula

W = 600+ 0.90n.

(i) Determine Jenny's weekly wage if she served 230 customers.

(ii) In a good week, Jenny's wage is $1 000.00 or more. What is the LEAST number

of customers that Jenny must serve in order to have a good week?

(iii) At the same restaurant, Shawna is paid a weekly wage of $270.00 plus $1.50 for

each customer she serves.

If W, is Shawna's weekly wage, in dollars, write a formula for calculating Shawna's

weekly wage when she serves m customers.

(iv) In a certain week, Jenny and Shawna received the same wage for serving the same

number of customers.

How many customers did they EACH serve?

3 / 3

(i) If Jenny serves 230 customers, her weekly wage is

W = 600 + 0.90n = 600 + 0.90(230) = $807.00

Therefore, Jenny's weekly wage if she serves 230 customers is $807.00.

(ii) We want to find the least number of customers, n, that Jenny must serve in order to earn $1,000 or more. That is,

600 + 0.90n ≥ 1,000

0.90n ≥ 400

n ≥ 444.44

Since n must be a whole number, Jenny must serve at least 445 customers in order to earn $1,000 or more in a week.

(iii) Shawna's weekly wage, W, in dollars, when she serves m customers is given by the formula:

W = 270 + 1.50m

Therefore, Shawna's weekly wage when she serves m customers is $270.00 plus $1.50 for each customer she serves.

(iv) Let's assume that Jenny and Shawna received the same wage, W, for serving the same number of customers, x. Then we have:

Jenny's wage = 600 + 0.90x

Shawna's wage = 270 + 1.50x

Setting these two expressions equal to each other, we get:

600 + 0.90x = 270 + 1.50x

330 = 0.60x

x = 550

Therefore, Jenny and Shawna each served 550 customers.

The price after discount is $33 and option 1 is the correct answer.

A discount is a drop in a product's or service's price. Discounts can be provided for a variety of purposes, such as to entice consumers to make larger purchases, to get rid of excess inventory, or to draw in new clients. Discounts can be represented as a set monetary amount or as a %, as in the example above. For instance, a shop may give customers $10 off any purchase of more than $50.

Given that, one-day discount rate of 45% is applied.

Thus,

Discount = 60.20 * 0.45 = 27.09

Price after discount = 60.20 - 27.09 = 33.11

Hence, the price after discount is $33 and option 1 is the correct answer.

Learn more about discount here:

https://brainly.com/question/16999193

#SPJ1

Answer: calculate the amount of his refund.

Step-by-step explanation:

The ratio of the length of the side directly opposite the angle to the length of the hypotenuse is known as the sine of an acute angle in a right triangle.

Hence, the sine of angle T in the right triangle RST with a right angle at S is given by:

opposite side / hypotenuse = sin T

We must know the triangle's side lengths in order to calculate the value of sin T. We can use trigonometric ratios to calculate the lengths of the remaining sides.

if we know the length of the hypotenuse and the measurement of one acute angle.

thus, we cannot define the value of triangle RST.

To learn about triangle RST visit:

https://brainly.com/question/28738706?referrer=searchResults

#SPJ4

In the following question, among the conditions given, {q1, q2} is a basis for the vector space of polynomials p(t) of degree at most two that satisfy the constraint p(2) = 0. In this particular case, we must enter our basis as [[1,0,-4],[0,1,-2]], since q1(t) = t^2 - 4 and q2(t) = t - 2.

To find a basis for the vector space of polynomials p(t) of degree at most two which satisfy the constraint p(2)=0, we can take the following steps:
1. Rewrite the polynomials as linear combinations of the form a + bt + ct^2
2. Use the constraint p(2) = 0 to eliminate one of the coefficients a, b, or c
3. Normalize the polynomials so that they are unit vectors
For example, if your basis is 1 + 2t + 3t^2, 4 + 5t + 6t2 then you can enter it as [[1,2,3],[4,5,6]].

For more such questions on polynomials

https://brainly.com/question/4142886

#SPJ11

Answer:

Ans = 8

Step-by-step explanation:

because -- is + and  −−√70 is positive

so square root =8.366600265340757

and 8 is bigger as 8.366600265340757 is a decimal number.