Kinematics equations tells us the position of an object under constant acceleration increases linearly with time.
A. True
B. False

Answers

Answer 1

Answer:

False.

Explanation:

Suppose that we have an object that moves with constant acceleration A.

Then the acceleration of the object is defined by the equation:

a(t) = A

The acceleration is the rate of change of the velocity, then the velocity equation is given by the integration of the acceleration equation, we will get:

v(t) = A*t + V₀

Where V₀ is the velocity of the object at the time t = 0s.

Now, if we integrate it again, we will get the position equation:

p(t) = (1/2)*A*t^2 + V₀*t + P₀

Where P₀ is the initial position equation.

Here, we can see that the position equation is a quadratic equation (not a linear equation), then the statement is false.


Related Questions

A 3-kg projectile is launched at an angle of 45o above the horizontal. The projectile explodes at the peak of its flight into two pieces. A 2-kg piece falls directly down and lands exactly 50 m from the launch point. Determine the horizontal distance from the launch point where the 1-kg piece lands.

Answers

1517.4 m

Step-by-step explanation:

Since the projectile broke up at the peak of its flight, it already traveled half its initial range so we can find its initial launch velocity [tex]v_0[/tex] from the equation

[tex]\frac{1}{2}R= \dfrac{1}{2} \left(\dfrac{v_0^2}{g}\sin 2\theta_0 \right)[/tex]

where [tex]\theta_0 = 45°[/tex] and [tex]\frac{1}{2}R = 50\:\text{m}[/tex] so we will get [tex]v_0=31.3\:\text{m/s}[/tex]. Next, we can use the equation

[tex]v_y = v_0y - gt = v_0 \sin 45 - gt[/tex]

and since [tex]v_y=0[/tex] at its peak, we get t = 22.1 s. Let's set this aside for a moment and we'll use it later.

At the top of its peak, we can use the conservation law of linear momentum. Let M be the mass if of the original projectile, [tex]m_1[/tex] be the mass of the larger fragment (2 kg) and [tex]m_2[/tex] be the mass of the smaller fragment (1 kg). We can write the conservation law as

[tex]Mv_0x = m_1V_1 + m_2V_2[/tex]

where [tex]V_1\:\text{and}\:V_2[/tex] are the velocities of the fragments immediately after the break up. But we also know that [tex]V_1=0[/tex] so the velocity of [tex]m_2[/tex] can be calculated from the conservation law as

[tex]Mv_0 \cos 45° = m_2V_2[/tex]

or

[tex]V_2 = \dfrac{M}{m_2}v_0 \cos 45° = 66.4\:\text{m/s}[/tex]

Now we can calculate the horizontal distance the smaller fragment traveled after the break up. Recall that the amount of time for it to go up is also the amount of time to get down so the horizontal distance x is

[tex]x = V_2 t = (66.4\:\text{m/s})(22.1\:\text{s})= 1467.4\:\text{m}[/tex]

Therefore, the total distance traveled from the launch point is

[tex]D = 50\:\text{m} + 1467.4\:\text{m}=1517.4\:\text{m}[/tex]

A total positive charge of 12.00 mC is evenly distributed on a straight thin rod of length 6.00 cm.
A positive point charge, Q = 4.00 nC, is located a distance of 5.00 cm above the midpoint of the
rod. What will be the electrical force on the point charge?

Answers

It’s not in English can you change it please

What must a plant need to produce 4 molecules of sugar?
What must a plant need to produce 4 molecules of sugar?

Answers

Answer:

To produce a single sugar molecule a plant must use a molecule of water (H2O) and carbon dioxide (CO2) and sunlight. To get 4 molecules, you simple use 4 molecules of water and 4 molecules of carbon dioxide

Carbon dioxide and water to produce glucose.

Determine the values of m and n when the following average magnetic field strength of the Earth is written in scientific notation: 0.0000451 T. Enter m and n, separated by commas.

Answers

Answer:

B = 4.51×10⁻⁵ T

Explanation:

Given that,

The average magnetic field strength of the Earth is 0.0000451 T.

We need to write the value in the form of scientific notation. Any number in scientific notation is written as follows :

N=a×bⁿ

Where

n is any integer and a is a real no

So,

0.0000451 = 4.51×10⁻⁵ T

So, the required answer is equal to 4.51×10⁻⁵ T.

What does a model of a light wave tell us about
brightness and color?

Answers

Answer:

A wave model of light is useful for explaining brightness,color, and the frequency-dependent bending of light at a surface between media. However, because light can travel through space, it cannot be a matter wave, like sound or water waves.

Which of the following phenomenon odd called photoelectric effect?

A. High energy electrons impinge on a metallic Annie which emits electrons

B. A high energy photon emits photons as it slows down

C. A metal absorbs a quanta of light and then emits electrons

D. Two electrons are created from a quanta of light.

Answers

two electrons are created from a quanta of kight

12) A negatively-charged balloon touching a wooden wall
A) pulls positive charge on the wall surface toward it.
B) pushes negative charge in the wall away from it.
C) polarizes molecules in the wall.
D) all of the above.

Answers

Answer:

D) all of the above.

Explanation:

First polarises it, cahrging and discharging occurs at once.

A negatively charged balloon touching a wooden wall then from the given options option D is correct which is all of the above.

What is a charge?

Charged matter experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. Positive or negative charges can exist in an electric field (commonly carried by protons and electrons, respectively).

Contrary charges attract one another, while like charges repel one another. A neutral object is one that carries no net charge. Classical electrodynamics, the name given to an early understanding of how charged particles interact, is still accurate for issues that do not call for taking into account quantum phenomena.

In the first step it polarizes molecules in the wall, then charging and discharging in the wall will take place at once.

To get more information about Charge :

https://brainly.com/question/19886264

#SPJ2

Một ô tô khối lượng một tấn chuyển động trên một đường nằm ngang. Hệ số ma sát giữa bánh ô tô và mặt đường là 0,07. Gia tốc trọng trường g=9,8m/s2
a) vẽ và xác định tên các lực tác động lên vật. Viết phương trình chuyển động của vật.
b) nếu ô tô chuyển động đều, xuống dốc có độ dốc 5%. Tính lực kéo của ô tô.
c) nếu ô tô chuyển động đều. Lên dốc có độ dốc 5%. Tính lực kéo của động cơ ô tô

Answers

C is the answer to it

Một vật chuyển động tròn đều có chu kì T = 0,25 s. Tính tần số chuyển động f của vật?

Answers

Answer:8pi

Explanatio

omega=2pi/T

Answer:

0

0000

Explanation:

what is the resistance of a bulb of 40w connected in a line of 70v​

Answers

Answer:

122.5 ohm

Explanation:

Given :

P=40 w

V= 70 V

R=?

Resistance can be calculated as :

[tex]P=\frac{V^{2} }{R} \\40=\frac{(70)^{2} }{R}\\40=\frac{4900}{R} \\R=\frac{4900}{40} \\R=122.5 ohm[/tex]

Therefore, resistance of the bulb will be 122.5 ohm

If a rock displaces 7 ml of water, what is the volume of the rock?

Answers

Answer:

if i am not mistaken the volume is 7, because it only took that much space

A homeowner has a new oil furnace which has an efficiency of 60%. For every 100 barrels of oil used to heat his house, how much (in barrels of oil) goes up the chimney as waste heat?

Answers

Answer:

below

Explanation:

What is the magnitude of a vector that has the following components: x = 32 m y = -59 m

Answers

Answer:

Explanation:

Since the x and y components are given

The vectors Magnitude = √32²+(-59)²

=67.12m

Azam had a metal pencil box and a wooden block on his table. When he touched them, the pencil box felt colder compared to the wooden block. When he measured their temperatures using a thermometer, he found that both the objects were at the same temperatures. What could be the reason for Azam to 'feel' that the pencil box was cooler? * (1 Point) Air around the pencil box was at a lower temperature which made the pencil box colder Wood produces heat and so, must have been at a higher temperature than the pencil box As metal is a better conductor of heat, it drew away heat from his hand faster than the wooden block. Metals are always at a lower temperature than other substances and so, there has been an error in measurement​

Answers

The third choice is the correct explanation. Don't make me type it all out on my phone.

A heat engine with 0.100 mol of a monatomic ideal gas initially fills a 3000 cm3 cylinder at 800 K. The gas goes through the following closed cycle Isothermal expansion to 5000 cm3 ?
Part A How much work does this engine do per cycle? Express your answer with the appropriate units. sochoric cooling to 200 K -Isothermal compression to 3000 cm3. - Isochoric heating to 800 K Value Units
Part B What is its thermal efficiency? Express your answer with the appropriate units.

Answers

Answer:

below

Explanation:

Part A) This engine works  per cycle is 254.9 J.

Part B) The thermal efficiency is  23.42%

What is the thermal efficiency?

The thermal efficiency of any heat engine is represented in percentage of heat energy converted into work.

For isothermal expansion, work done is

W₁ =nRT₁ x ln(V₂/V₁)

W₁ = 0.1 x 8.314 x 800 x ln(5000/3000)

W₁ = 339.8 J =Q₁

For isochoric cooling ,

W₂ =0

Q₂ =nCvdT = 0.1 x 3R/2 x (T₂-T₁)

Q₂ = -748.3 J

For isothermal compression,

W₃ =nRT₂ ln (V₄/V₃)

W₃  = 0.1 x 8.314 x 200 x ln(3000/5000)

W₃ = -84.9J

For isochoric heating

W₄ =0

Q₄ =nCvdT = 0.1 x 3R/2 x (800-200)

Q₄  = -748.3 J

Total work done in all the process W = W₁ +W₂ +W₃ +W₄

W =254.9 J

Thus, the work done is 254.9 J

Thermal efficiency = Work done/Heat taken

η = W/ Q₁ +Q₄

η = [254.9 / 339.8 +748.3 ] x 100 %

η = 0.2342 x 100 %

η = 23.42%

Thus, the thermal efficiency is 23.42%

Learn more about thermal efficiency.

https://brainly.com/question/13039990

#SPJ2

'

help plzzzzzzzzzzzz ?

Answers

Explanation:

1. First, let's find the total resistance of the circuit. We begin by combining [tex]R_{4}[/tex], [tex]R_{5}[/tex] and [tex]R_{6}[/tex]:

[tex]R_{456}=R_{4} + \dfrac{R_{5}R_{6}}{R_{5} + R_{6}}[/tex]

[tex]= 6\:Ω + \dfrac{(3\:Ω)(5\:Ω)}{3\:Ω+5\:Ω} = 7.9\:Ω[/tex]

Now time to combine [tex]R_{2}[/tex] and [tex]R_{3}[/tex] and they are connected in series so

[tex]R_{23} =R_{2} + R_{3} = 17\:Ω[/tex]

Note that [tex]R_{23}[/tex] and [tex]R_{456}[/tex] are connected in parallel so

[tex]R_{23456} = \dfrac{R_{23}R_{456}}{R_{23}+R_{456}}=5.4\:Ω[/tex]

Finally, [tex]R_{23456}[/tex] is connected in series with [tex]R_{1}[/tex] so the total resistance [tex]R_{T}[/tex] is

[tex]R_{T} = R_{1} + R_{23456} = 10\:Ω + 5.4\:Ω = 15.4\:Ω[/tex]

2. The total current in the circuit is

[tex]I_{T} = \dfrac{V}{R_{T}} = \dfrac{20\:V}{15.4\:Ω} = 1.3\:A[/tex]

3. The voltage drop across [tex]R_{1},\:V_{1}[/tex] is

[tex]V_{1} = I_{T}R_{1} = (1.3\:A)(10\:Ω) = 13\:V[/tex]

4. We can see that [tex]I_{T} = I_{1} + I_{2}[/tex]. To solve for [tex]I_{1}[/tex], we need [tex]V_{23}[/tex], which is just [tex]V_{T} - V_{1} = 20\:V - 13\:V = 7\:V[/tex] , which gives us

[tex]I_{1} = \dfrac{V_{23}}{R_{23}} = \dfrac{7\:V}{17\:Ω} = 0.4\:A[/tex]

5. From #2 & #4, [tex]I_{2} = 1.3\:A - 0.4\:A = 0.9\:A[/tex] and we also know that the voltage drop across [tex]R_{456}[/tex] is 7 V, the same as that of [tex]R_{23}[/tex]. The voltage drop across [tex]R_{4}[/tex] is

[tex]V_{4} = I_{2}R_{4} =(0.9\:A)(6\:Ω) = 5.4\:V[/tex]

This means that the voltage drop across [tex]R_{6}[/tex] is 7 V - 5.4 V = 1.6 V. Knowing this, the current through [tex]R_{6}[/tex] is

[tex]I_{6} = \dfrac{1.6\:V}{5\:Ω} = 0.3\:A[/tex]

what is effort arm
don't say the answer of gogle ​

Answers

Answer:

effort arm mean the use of any work by using your hand force motion or by hand power

When you release some of the paint from a spray paint can and the can remains at the same temperature, which gas law does this represent?

Answers

Answer:

Boyle's law.

Explanation:

Robert Boyle was an Irish chemist and is famously referred to as the first modern chemist. He was born on the 25th of January, 1627 in Lismore, Ireland and died on the 31st, December 1691, London, United Kingdom.

Boyles states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.

Mathematically, Boyles law is given by;

[tex] PV = K[/tex]

[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]

Where;

P1 is the original pressure.

P2 is the final pressure.

V1 is the original volume.

V2 is the final volume.

Hence, when you release some of the paint from a spray paint can by applying an amount of pressure and the can remains at the same temperature, the gas law which this represent is Boyle's law.


What is a reasonable measurement for the distance to Neptune?
30 light years
30 kilometers
30 parsecs
30 Astronomical Units

Answers

Answer:

30 kilometers is a reasonable measurement

You take your pulse and observe 80 heartbeats in a minute. What is the period of your heartbeat? What is the frequency of your heartbeat?

Answers

Answer:

120 beats per minute.

Explanation:

If I take your pulse and observe 80 heartbeats in a minute. Then the period of your heartbeat is 0.8 s and frequency is 1.3Hz.

What is Heartbeat ?

A pulse is the term used in medicine to describe the tactile arterial palpation of the cardiac cycle (heartbeat) by skilled fingertips. Any location where an artery can be compressed close to the surface of the body, such as the carotid artery in the neck, the radial artery in the wrist, the femoral artery in the groyne, the popliteal artery behind the knee, the posterior tibial artery near the ankle joint, and on the foot, can be used to palpate the pulse (dorsalis pedis artery). Heart rate may be determined by monitoring pulse, or the number of arterial pulses per minute. Auscultation, which is the process of counting the heartbeats while listening to the heart using a stethoscope, is another way to determine the heart rate. Typically, three fingers are used to gauge the radial pulse.

Given,

heart beat = 80 beats/min = 1.3 beats/s

Frequency is nothing but how much beats is heart having in one second and that is 1.3 beats/s. Hence frequency of heart is 1.3Hz.

The Period is reciprocal of frequency,

T = 1/f = 0.8 s

To know more about frequency :

https://brainly.com/question/29739263

#SPJ2.


40 ohms
1.2 A
40 ohms
12 V


Calculate the total energy developed in 5
minutes by the system above.​

Answers

Answer:

17280 J and 1080 J

Explanation:

Given :

R= 40 ohm

I=1.2A

t= 5 min=60×5=300 sec

Now,

Total energy can be calculated as:

[tex]E=I^{2} Rt\\E=(1.2)^{2} *40*300\\E=17280 J[/tex]

Now,

V=12V

R=40 Ohm

[tex]E=\frac{V^{2} }{R} *t\\E=\frac{(12)^{2} }{40} *300\\E=1080 J[/tex]

Total energy  is 17280 J and 1080 J

what affects our utility​

Answers

Answer:

Energy Bill fluctuations are inevitable and depend on a variety of different factors. Two of the most important are the current weather your home is experiencing and the current price per Kilowatt Hour (which fluctuates more than you might think).

Utility is a term in economics that refers to the total satisfaction received from consuming a good or service. Economic theories based on rational choice usually assume that consumers will strive to maximize their utility. ... In practice, a consumer's utility is impossible to measure and quantify.

HELP ME PLEASE!!!
Which 2 statements are true about this chemical reaction that forms acid rain?

Answers

Answer:

B.

Explanation:

HNO2 is less stable thus dissociates easily to HNO3 + NO + H2O while HNO3 is a strong acid. Thus when they react with H2O they form acid rain

Answer:

B

Explanation:

dont have one just trust me

In addition to acceleration, what else will be a maximum at the amplitude for SHM?

A. Potential energy
B. Kinetic energy
C. Nuclear energy
D. Chemical energy

Answers

It is Potential energy's

Hey, can a physics major help me?

I have been wondering about the exact difference between theories laws facts and hypothosis.
I know the general layout but I am still a bit confused.

100 points for answering and brainly if it is a good one.

Answers

Answer:

A hypothesis is a limited explanation of a phenomenon; a scientific theory is an in-depth explanation of the observed phenomenon. A law is a statement about an observed phenomenon or a unifying concept

Answer:

Explanation:

will try 2 explain fact, hypothesis, theory n law

fact is the starting pt: e.g. apple falls from tree

hypothesis tries 2 explain a fact: e.g. there is a force pulling down apple

theory is a complete explanation w/ equations n stuff: e.g. Newton came up w/ theory of gravitational attraction force

law is a theory dat has been proven right through tests n experiments: Newton's gravity theory had been proven right in many many tests.

A swift blow with the hand can break a pine board. As the hand hits the board, the kinetic energy of the hand is transformed into elastic potential energy of the bending board; if the board bends far enough, it breaks. Applying a force to the center of a particular pine board deflects the center of the board by a distance that increases in proportion to the force. Ultimately the board breaks at an applied force of 870 N and a deflection of 1.4 cm.
a. To break the board with a blow from the hand, how fast must the hand be moving? Use 0.50 kg for the mass of the hand.
b. If the hand is moving this fast and comes to rest in a distance of 1.2 cm, what is the average force on the hand?

Answers

Answer:

A. The hand must move with a velocity of 6.98 m/s to break the board.

B. Average force on the hand = 1025 N

Explanation:

A.To determine the speed the hand must move with to break the board, the force workdone in breaking the board is found first.

Workdone = force × distance

Minimum force required = 870 N;

Distance moved by board/Deflection in order to break = 1.4 cm = 0.014 M

Workd done = 870 N × 0.014 m = 12.18 Nm or 12.18 J

This work done = Kinetic energy of the hand

Kinetic energy = mv²/2 ; where m is mass and v is velocity

Mass of hand = 0.50 Kg, velocity = ?, K.E. = 12.18 J

v² = 2 KE/m

v = √2KE/m

v = √(2 × 12.18/0.50)

v = 6.98 m/s

Therefore, the hand must move with a velocity of 6.98 m/s to break the board.

B. Average force on the hand

This can be determined using the equation of motion, v² = u² + 2as to find acceleration, since force = mass × acceleration

From the equation of motion, a = v² - u²/2s

At rest, v = 0, u = 6.98, s = 1.2 cm = 0.012 m

a = 0² - 6.98²/ 2 × 0.012

a = -2030 m/s²

Force = 2030 m/s² × 0. 50 kg = 1015 N

Therefore, Average force on the hand = 1025 N

Khối lượng ban đầu của mặt trời m⊙ = 2 × 1030 kg trong đó có 71 % là
hydrogen. Trong 5×10^9 năm đầu tiên, mặt trời phát ra năng lượng với công suất
3.86 × 10^26 W, nhờ phản ứng
4p → 4+2He + 2e
+ 2νe + 26 MeV
trong đó bốn proton tổng hợp thành hạt α và tỏa ra năng lượng 26 MeV. Hãy
xác định
a) số hạt proton của mặt trời tại thời điểm ban đầu.
b) số hạt proton của mặt trời tham gia phản ứng trong 1 năm.
c) số hạt proton còn lại trong mặt trời sau 5 × 10^9 năm.
d) thời gian để tiêu thụ hết 10 % số hạt proton còn lại của mặt trời

Answers

Answer:

jsgssbvwsvs

Explanation:

ifmd understand

If the car falls down the side of the cliff, what is happening to the gravitational potential energy of the falling car? (Assume the bottom of the cliff is zero)

Answers

Answer:

Sentences with many clauses and phrases are difficult to understand because the clauses and phrases typically _____.

modify other clauses and phrases in the sentence

refer to other sentences in the passage

make it hard to determine where the sentence ends

change the intended meaning of the sentence

Explanation:

Suppose there are 3 molecules in a container. If each molecule has a 1-in-2 chance of being in the left half of the container, what is the probability that there are exactly 2 molecules in the left half of the container?

Answers

Answer:

Total probability = 3/8

Explanation:

Below is the calculation:

Number of molecules in the container = 3

The probability of one molecule in the left half, P = 3 / 2 = 1.5 or 1/2

The probability of second molecule in the left half, P1 = (3/4)

Total probability = P x P1

Total probability = (1/2) x (3/4)

Total probability = 3/8

An iron nail floats in mercury and sinks in water. explain why?​

Answers

Answer:

because density of iron is more than that of water but less then that of Mercury

hope it's helpful

Other Questions
Four fundamental factors affect the cost of money:1.The return that borrowers expect to earn on their investments2.The preference of savers to spend their income in the current period rather than delay their consumption until some future period3.The risks associated with the investment4.Expected inflationConsider the following statements that address these factors, and indicate if you think each statement is true or false.StatementTrueFalseInvestments providing cash flows that are more likely to equal their expected value are said to exhibit more risk.The actual relationship between the risk-free rate of return (r*r*) and the expected future inflation rate or inflation premium (IP) is actually multiplicativethat is, [(1 + rRFrRF) x (1 + IP)] 1but it is often simplified to reflect an additive relationship.All things being equal, rational savers and investors prefer to invest in an asset that provides a 12% return rather than one that provides an 8% return.All things being equal, savers and investors prefer more risk to less risk and prefer lower risk premiums on projects exhibiting higher levels of risk.On average and everything else held constant, an investment that can provide a 4% return should attract more investment capital from savers/investors than an otherwise identical investment that can generate a 12% return. What is the magnitude of a vector that has the following components: x = 32 m y = -59 m Please help!! Thank you if you do!! how much greater is the volume of the refrigerator than the volume of the top part ne implication from the evidence on EI to date is that employers should consider it a factor in hiring employees, especially in jobs that demand ________. good mathematical skills good critical thinking skills good analytical skills the ability to work independently a high degree of social interaction writing a persuasive paragraph for someone to buy a penPlease I need it quickly. Find the value of k, if (x - 2) is a factor of the polynomial p(x) = 2x2 + 3x - k The root for an equation x-px+6=0 ls 3. Find the value of pJawapan / AnneIP What is the answer to 12 radius circle Your reading material uses an analogy of watering a plant as a way of discussing.A.preserving allianceB. Leadership skills C. Communication skills D. Self motivation what is the answer to 11/5 divided by 2/5 What are the values of x in the equation x2 - 6x + y =A)x= -2 or x = 8B)x= -1 or x = -11C)x= 1 or x = 11D)x = 2 or x = -8 anyone know this game :)game when i was little find the value of x and y can the enzyme DNA polymerase be used to break down or build lactose? David has available 240 yards of fencing and wishes to enclose a rectangular area.(a) Express the area A of the rectangle as a function of the width W of the rectangle.(b) For what value of W is the area largest?(c) What is the maximum area? cho t gic li ABCD v im S khng thuc mt phng(ABCD). c bao nhiu mt phng qua S v hai trong s bn imA B C D why is it preferred to use calcium oxide rather than calcium chloride in preparation of iron (III) chloride convert 4 years to months Which best describes how the total mass of the substances that go intophotosynthesis compares to the mass of substances that are presentafterward?O A. The mass increases because the molecules that are produced arelarger than those that are used.B. The mass increases because some light energy changes intomass.O C. The mass stays the same because the total number of atomsdoes not changeO D. The mass decreases because plants destroy some of the atomsduring photosynthesis.