Answer:
sorry my phone died lol but here are the answers
<3
It takes 45.60 mL of a 0.225 M hydrochloric acid solution to react completely with 25.00 mL of calcium hydroxide in this reaction below, what is the molar concentration of the calcium hydroxide solution?
2HCl(aq) + Ca(OH)2(aq)!CaCl2(aq) + 2H2O(l)
Given :
It takes 45.60 mL of a 0.225 M hydrochloric acid solution to react completely with 25.00 mL of calcium hydroxide in the given reaction.
2HCl(aq) + Ca(OH)2(aq) --> CaCl2(aq) + 2H2O(l)
To Find :
The molar concentration of the calcium hydroxide solution.
Solution :
From given equation 2 mole of hydrochloric acid react with 1 mole of calcium hydroxide.
So,
[tex]2M_1V_1 = M_2V_2\\\\2\times 0.225 \times 45.60 = M_2 \times 25 \\\\M_2 = \dfrac{20.52}{25}\\\\M_2 = 0.8208 \ M[/tex]
Therefore, molar concentration of the calcium hydroxide solution is 0.8208 M.
Answer:
Molar concentration of the calcium hydroxide solution = 0.2052 M
Explanation:
Volume of HCl = 45.60 mL = 0.0456 L
Molar concentration of HCl = 0.225 M
Volume of Ca(OH)2 = 25.00 mL = 0.025 L
No. of moles of HCl = (0.225 M)*(0.0456 L) = 0.01026 mol
As we know
2 moles of HCl require 1 mole of Ca(OH)2, hence, .01026 moles of HCl will need 0.5*(0.01026) = 0.00513 moles of Ca(OH)2
Molar concentration of Ca(OH)2 = [(0.00513 mol)/(0.025 L)] = 0.2052 M
What happens if more solute is added to a saturated solution?
Answer:
A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.
Answer:
will not change
Explanation:
A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.
1. (An example of non-point-source pollution is
A. Wastewater from a leaking pipe.
B. Fertilizer runoff from lawns.
C. Oil from a leaking underground tank.
D. Chemicals released from a paper mill
Answer:
i think the answer is c.
Explanation:
A 90-m3 basement in a residence is found to be contaminated with radon coming from the ground through the floor drains. The concentration of radon in the room is 1.5 Bq/L under steady-state conditions. The room behaves as a CSTR and the decay of radon is a first-order reaction with a decay rate constant of 2.09 3 1026 s21 . If the source of radon is closed off and the room is vented with radon-free air at a rate of 0.14 m3 /s, how long will it take to lower the radon concentration to an acceptable level of 0.15 Bq/L
Answer:
25 minutes
Explanation:
V = Volume = [tex]90\ \text{m}^3[/tex]
[tex]C_0[/tex] = Radon concentration under steady state = 1.5 Bq/L
k = Radon decay rate = [tex]2.09\times 10^{-6}\ \text{s}^{-1}[/tex]
[tex]Q[/tex] = Venting rate = [tex]0.14\ \text{m}^3/\text{s}[/tex]
[tex]C_f[/tex] = Final concentration of radon = 0.15 Bq/L
Theoretical detention time is given by
[tex]\theta=\dfrac{V}{Q}\\\Rightarrow \theta=\dfrac{90}{0.14}\\\Rightarrow \theta=642.86\ \text{s}[/tex]
We have the relation
[tex]C_f=C_0e^{-(\dfrac{1}{\theta}+k)t}\\\Rightarrow t=\dfrac{\ln\dfrac{C_f}{C_0}}{-(\dfrac{1}{\theta}+k)}\\\Rightarrow t=\dfrac{\ln\dfrac{0.15}{1.5}}{-(\dfrac{1}{642.86}+2.09\times 10^{-6})}\\\Rightarrow t=1478.25\ \text{s}=\dfrac{1478.25}{60}=24.63\approx 25\text{minutes}[/tex]
The time taken to reach the acceptable level of concentration is 25 minutes.
If objects with a greater mass have greater gravitational pull, why is our solar
system, Sun, planets and asteroids, NOT pulled into Alpha Centauri A?
Answer:
It's too far away
Explanation:
According to classical mechanics, gravitational pull is inversely proportional to the distance squared; as the distance increases, the gravitational pull decreases at a faster and faster rate. Since Alpha Centauri A is a few lightyears (Tens of trillions of kilometers away), without even needing to calculate the force of gravity, it is very miniscule.
The process of breaking a compound down into its elements is called
rearrangement
recombination
decomposition
dessication
Why do you think there are different stars in each nighttime section of the artifact?
Answer:
The sky looks different in each nighttime section of the artifact because the artifact sections represent different seasons. ... Different constellations are visible on different nights throughout the year because of the earth's orbit. The Earth orbits around the sun. A full orbit is 365 days or one year.
Explanation:
A double-replacement reaction takes place when aqueous Na,co, reacts with aqueous Sn(NO3), according to the following equation. Na,co, + Sn(NO,)
You would expect one of the products of this reaction to be
20
Sn2(CO3)2
NaNO,
O Nas
OCNO,
Answer:
[tex]Sn(CO_3)_2[/tex] and [tex]NaNO_3[/tex].
Explanation:
Hello there!
In this case, according to the described chemical reaction between sodium carbonate and tin nitrate, we can write the undergoing chemical reaction:
[tex]2Na_2CO_3+Sn(NO_3)_4\rightarrow Sn(CO_3)_2+4NaNO_3[/tex]
Thus, we notice that the products are strontium carbonate and sodium nitrate, whose formulas are [tex]Sn(CO_3)_2[/tex] and [tex]NaNO_3[/tex] respectively.
Best regards!
A neutron is a negatively-charged particle in the atom. true or false
Answer: true
Explanation:
what do you mean by carrier
Answer:
1 : one that carries : bearer, messenger. 2a : an individual or organization engaged in transporting passengers or goods for hire. b : a transportation line carrying mail between post offices.
For many years chloroform (CHCl3) was used as an inhalation anesthetic in spite of the fact that it is also a toxic substance that may cause severe liver, kidney, and heart damage. Calculate the percent composition by mass of this compound to four significant figures.
Answer:
SEE EXPLANATION
Explanation:
We must first obtain the molar mass of CHCl3 as follows;
CHCl3 = ( 12.01 * 1 )+ (1.008 * 1 ) + ( 35.45 * 3 ) => 119.37 g/mol
Then we obtain the percentage by mass of each element
For Carbon = ( atomic mass C / molar mass CHCl3 ) * 100
C = (12.01 / 119.37 ) * 100
C = ( 0.1006 * 100 )
C = 10.06 %
For Hydrogen :
H = ( atomic mass H / molar mass CHCl3 ) * 100
H = ( 1.008 / 119.37 ) * 100
H = 0.008444 * 100
H = 0.8444 %
For Chlorine :
Cl ( molar mass Cl3 / molar mass CHCl3 ):
Cl = ( 3 * 35.5 / 119.37 ) * 100
Cl = ( 106.5 / 119.37 ) * 100
Cl = 0.8921 * 100
Cl = 89.92%
Write a structural formula for the principal organic product formed in the reaction of methyl bromide with each of the following compounds:
1. Sodium hydroxide
2. Potassium ethoxide
3. Sodium benzoate
4. Lithium azide
Answer:
1. CH3Br + NaOH --------> H3C---OH + Na---Br
Explanation:
What type of intermolecular forces occur between 2 oil molecules?
Answer:
The three main kinds of intermolecular interactions are dipole-dipole interactions, London dispersion forces, and hydrogen bonds
Explanation:
why are electrical wires covered with plastic coating
Answer:
For safety.
Explanation:
Because uncovered wires are conductors, an electric current could damage someone if touched. Plastic and rubber are insulators, meaning that current cannot pass through them.
. Which one is NOT an INDICATOR that a chemical has occurred
A) Gas is produced
B) Precipitate is produced
C) Change in energy
D) Change in mass
what is the pH if the H+ is 5.7 x 10^-10 M ?
Answer:
9.24
Explanation:
-logofH
Argon occupies a volume of 28.3 L at a pressure of 0.36 atm. Find the volume of argon when the pressure is increased to 0.85 atm.
Answer:
12
Explanation:
Boyles law
P1 (.36)
V1(28.3)
P2(.85)
V2(?)
P1*V1=P2*V2
plug it in, and you get 12
Two elevators carry five passengers to the fifth floor. However, the elevators do not do the same work. Choose the best factor for
determining the amount of work the elevators did.
A.the speed of the elevator
B.the weight of the passengers
C.the number of buttons pressed
Will mark brainlist pls help!
Answer:
B the weight of the passengers
Suppose that scientists want to study a feature of the galaxy that is very far away. They decide to use a telescope that observes high-energy gamma rays. Explain why this would be a good choice.
Answer & Explanation:
Gamma rays are the most energetic form of electromagnetic radiation. By observing the distant galaxy at gamma-rays, scientists can search for new physics, test theories, and perform experiments that are not possible in earth-bound laboratories.
Write a balanced net ionic equation.
Na3PO4(aq) + FeCl3(aq) = NaCl(aq) + FePO4(s)
Explanation:
Na3PO4+ FeCl3 = 3NaCl + FePO4
Hope it will help :)❤
The net ionic equation is found to be balanced by both mass and charge. There are equal masses of each element on the product and reactant sides in a balanced net ionic equation.
What is a net ionic equation?A chemical equation which shows only those elements, compounds, and ions which are directly involved in the chemical reaction is defined as the net ionic equation. The net ionic equation give us information about the ions that exists in aqueous medium.
A net ionic equation does not consider the spectator ions. The ions which do not participate in chemical reactions and are seen on both sides of the reactions are called spectator ions.
The complete ionic equation for the given reaction is:
3Na⁺ (aq) + PO₄³⁻ (aq) + Fe³⁺ (aq) + 3Cl⁻ (aq) → 3Na⁺ (aq) + 3Cl⁻ (aq) + FePO₄ (s)
The net ionic equation is:
PO₄³⁻ (aq) + Fe³⁺ (aq) → FePO₄ (s)
To know more about net ionic equation, visit;
https://brainly.com/question/29299745
#SPJ2
What is the source of Earth's magnetic field according to what you have read in chapter 222
Answer:
Scientists know that today the Earth's magnetic field is powered by the solidification of the planet's liquid iron core. The cooling and crystallization of the core stirs up the surrounding liquid iron, creating powerful electric currents that generate a magnetic field stretching far out into space.
The addition, removal, or substitution of nitrogenous bases in a DNA molecule may be caused by . Synapsis C. Disjunction B. Hybridization D. Mutation
Answer:
D. Mutation
Explanation:
Mutation is any change or alteration that occurs to the nucleotide sequence of a gene induced during DNA replication or by mutation-causing substances called MUTAGENS.
Mutation can be in the form of addition, removal, or substitution of nitrogenous bases in a DNA molecule. For example, in an original DNA sequence as follows: GAT ATC TGA, the following mutation can occur:
Addition: GAT ATC CTG A
Removal: GAT ATT GA
Substitution: GAT CTC TGA
.50 ml of a solution are diluted to a volume of 100 ml. The concentration of the diluted
solution is 2 M. What was the concentration of the original solution?
pls answer asap! will mark as brainly ist!!
Answer:
4 M
Explanation:
To answer this problem we can use the following formula:
V₁C₁ = V₂C₂Where the subscript 1 refers to the volume and concentration before diluting, and 2 refers to volume and concentration after diluting.
Meaning that in this case we can write:
50 mL * C₁ = 100 mL * 2 MWe can now solve for C₁:
C₁ = 4 MAn organic compound which has the empirical formula CHO has an approximate
molar mass of 145 g/mol. What is its probable molecular formula?
Answer:
Molecular formula => C₅H₅O₅
Explanation:
From the question given above, the following data were obtained:
Empirical formula = CHO
molar mass of compound = 145 g/mol
Molecular formula =?
The molecular formula of the compound can be obtained as follow:
Molecular formula = Empirical formula × n
Molecular formula = [CHO]ₙ
[CHO]ₙ = 145
[12 + 1 + 16]n = 145
29n = 145
Divide both side by 29
n = 145 / 29
n = 5
Molecular formula = [CHO]ₙ
Molecular formula = [CHO]₅
Molecular formula => C₅H₅O₅
What products will form when bromine is added to gallium chloride?*
A.)no reaction will occur
B.)gallium bromide and chlorine
C.)gallium bromine and chloride
D.)bromine chloride and gallium
In that question how( b) are enantiomers? I want the steps pleas ?
Answers:
1. firstly Start numbering from that carbon atom which would be nearest to chlorine .
2. then if u observed properly , both chlorine is attached are attached to 2nd carbon atom.
3.but in first one chlorine is on the left side
whereas in the second one chlorine right side.
p.s:
1. well, were u have number carbon three in above pic take it as C1 than C2( if u observed it is were Cl is attached to C2 ) than C3 ,C4.
2. Then similarly in second molecules where u have number C3 in above pic take it as C1 than C2 (if u observed , again Cl is attached to C2 but this time it is one on opposite sides.
now imagine if u kept first molecules on second one.
matching C1 C2 C3 C4 of first molecules with
C1 C2 C3 C4 of second molecule .
u will observed that in both of them Cl is on C2 but they in exactly opposite position
Explanation:
Enantiomers are a pair of molecules that exist in two forms that are mirror images of one another but cannot be superimposed one upon the other.
Considering change of state descriptions, select the name of the change of state for when energy is absorbed. Group of answer choices sublimation freezing condensation deposition
Answer: Sublimation
Explanation:
Sublimation : It is a process in which a solid directly changes to gaseous phase by providing heat.
Freezing is a process in which a liquid changes into solid phase when allowed to cool.
Condensation is a process in which a gas changes into liquid phase when allowed to cool.
Deposition is a process in which a gas deposits as solid phase when allowed to cool.
Thus change of state where energy is absorbed is sublimation.
For the reaction 2 Cr(s) + 3 Pb²⁺(aq) ⟶ 3 Pb(s) + 2 Cr³⁺(aq), what is the value of n in the Nernst equation?
Answer:
The value of n is 6
Explanation:
The half-reactions of the problem are:
Cr(s) → Cr³⁺ + 3e⁻
Pb²⁺ + 2e⁻→ Pb(s)
To balance the electrons we must multiply the half-reactions as follows:
2 * (Cr(s) → Cr³⁺ + 3e⁻)
3 * (Pb²⁺ + 2e⁻→ Pb(s))
2Cr(s) → 2Cr³⁺ + 6e⁻
3Pb²⁺ + 6e⁻→ 3Pb(s)
In Nernst equation, the value of n are the electrons used to balance the reaction, as in this problem, the electrons are 6:
The value of n is 6The speed of an electron is 1.68*10^8m/s what is the wavelength
Answer:
[tex]\lambda =4.33x10^{-12}m=4.33pm[/tex]
Explanation:
Hello there!
In this case, since the speed, wavelength and mass of an electron are related via the the Broglie wavelength:
[tex]\lambda =\frac{h}{m*v}[/tex]
Thus, by plugging in the mass of the electron and the Planck's constant, we obtain the following wavelength:
[tex]\lambda =\frac{6.626x10^{-34}J*s}{9.11x10^{-31}kg*1.68x10^{8}m/s}\\\\\lambda =4.33x10^{-12}m=4.33pm[/tex]
Best regards!
Help please thank youu
Answer:
The KE increases.
Explanation:
KE=1/2(mv²)
So, as the velocity increases, kinetic energy also increases.