Levi decides to examine the effect of fertilizer on the growth of tomato plants. He chooses four plants for his experiment and applies varying amounts of fertilizer to three of them. He does not apply fertilizer to one plant. Over a 15-day period, the plants receive fertilizer on Days 1, 4, 7, 10, and 13. Levi measures the height of all of his plants with a meter stick on days 3, 6, 9, 12, and 15. He also makes sure to hold all experimental factors constant except for the fertilizer.

Where should the independent and dependent variables of Levi's experiment be placed when graphed?

Select all that apply.

the amount of fertilizer;y-axis

plant height;x-axis

the amount of fertilizer;x-axis

plant height; y-axis

Answers

Answer 1

Answer:

the amount of fertilizer; x-axis

plant height; y-axis

Explanation:

Answer 2

The independent and dependent variables of Levi's experiment placed when graphed are the amount of fertilizer and the y-axis. Option B is correct.

What are independent and dependent variables?

The independent variables are those which are not dependent on other factors for their working or cannot be influenced by any other factor and the dependent variable is just the opposite of this one.

The experiment depends on the height of the plant but the fertilizer is independent of to work of the plant and fertilizer is independent and high and depends on other factors.

Therefore, Option B is correct. independent and dependent variables of Levi's experiment placed when graphed are the amount of fertilizer and the y-axis.

Learn more about independent and dependent variables, here;

https://brainly.com/question/1479694

#SPJ2


Related Questions

Which of the following factors does not determine the movement of particles in the atoms or molecules of a gas according to the ideal gas law? (3 points) Select one: a. Pressure b. Temperature c. Volume d. Type of particles

Answers

Answer:

type of particles

Explanation:

Considering te definition of idela gas law, the correct answer is option C. type of particles is a  factor that doesn't determine the movement of particles in the atoms or molecules of a gas according to the ideal gas law.

An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:  

P×V = n×R×T

where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. The universal constant of ideal gases R has the same value for all gaseous substances.

Finally, pressure, temperature and volume are factors that determine the movement of particles in the atoms or molecules of a gas according to the ideal gas law.

So, the correct answer is option C. type of particles is a  factor that doesn't determine the movement of particles in the atoms or molecules of a gas according to the ideal gas law.

Learn more:

https://brainly.com/question/4147359?referrer=searchResults

A balloon is floating around outside your window. The temperature outside is 31 ∘C , and the air pressure is 0.700 atm . Your neighbor, who released the balloon, tells you that he filled it with 4.10 moles of gas. What is the volume of gas inside this balloon? Express to THREE signficant figures.

Answers

Answer:

the volume of gas inside this balloon = 146.3 L

Explanation:

Given that:

The temperature T = 31 °C = ( 31 + 273.15 )K = 304.15 K

The air pressure P = 0.700 atm

number of moles of gas n = 4.10 moles

Gas constant = 0.0821 L atm/K/mol

The objective is to calculate the volume of the gas inside the ballon.

Using the Ideal gas equation

PV = nRT

V = nRT/P

V = (4.10×0.0821×304.15)/0.700

V = 102.3799/0.700

V = 146.257 L

V = 146.3 L

Thus, the volume of gas inside this balloon = 146.3 L

what is the light transmission of gallium?

Answers

Explanation:

the intensity of a He-Ne laser (633 nm ,5 mW) transmitted by different Gase samples is observed to change in correlation with the Nd-yttrium-aluminium-garnet laser pulse (532 nm, 7.8ns ,3mJ) which excites them

How is heat transferred through convection?
A. Heat is transferred by energy waves moving through space.
B. Heat is transferred through contact between molecules
C. Heat is transferred by light being changed into kinetic energy.
D. Heat is transferred by the movement of a liquid or gas.​

Answers

Heat is transferred through convection by the movement of a liquid or gas and is denoted as option D.

What is Convection?

this is defined as the process of heat flow through a fluid which include a liquid or gas.

This process doesn't involve contact between the object unlike in conduction. A typical example is the heat flow which occurs in the atmosphere thereby making it the most appropriate choice.

Read more about Convection here https://brainly.com/question/9382711

#SPJ1

boron has two naturally occurring isotopes: boron -10 (abundance = 19.8% , mass = 10.013 amu) boron -11 (abundance = 80.2%, mass= 11.009 amu) Calculate th eatomic mass of boron

Answers

Explanation:

eam=%abudance×mass+%abudance×mass

eam=19.8%×10.013/100+80.2%×11.009/100

eam=198.2574/100+882.9218/100

eam=1081.1792/100

eam=10.811792

eam=10.812

Ytu perform an electrolysis reaction using FeCl, iron (1) chloride. Which of the following will happen?
A. Chlorine will move to the positive electrode and become reduced.
B. Iron will move to the positive electrode and become oxidized.
C. Chlorine will move to the negative electrode and become oxidized.
D. Iron will move to the negative electrode and become reduced.

Answers

Answer:

The answer is "Option B"

Explanation:

when we react with FeCl, iron, and chloride to both the electrolysis. So, iron is charged positive ion, as well as passes to the negative, is cathode electrode. But there is a decrease in the cathode.

The equation can be defined as follows:

[tex]FeCl_2[/tex] [tex]\longrightarrow[/tex][tex]Fe + Cl_2[/tex]

In the above equation, when the iron chloride electrolysis solution, it will give the iron(II) and the chlorine. This process happens when the hydrogen chloride solution at a temperature of about 90 ° C.

Answer: D

Explanation: As Fe is positive charged while chlorine is negative charged.

(D) is correct. As iron moves to negative and it get reduce as negative electrode is cathode

A solution of HCL has percent by mass of 5%. What does it mean?​

Answers

This means that in 100g of solution, there are 5g of HCl and 95g of water

Cubes are three-dimensional square shapes that have equal sides. What is the density of a cube that has a mass of 12.6 g and a measured side length of 4.1 cm? (Density: D = )

Answers

Answer:

0.1828g/cm³

Explanation:

density= mass÷volume

m= 12.6g

v= 4.1×4.1×4.1 = 68.921cm³

density= 12.6÷68.921 = 0.1828g/cm³

Suppose we want to charge a flask with 2.4 g of sugar. We put the empty flask on a balance and it is determined to weigh 150 g. What is the weight we would expect to see on the balance when we're done adding the sugar?

Answers

Answer:

152.4 g

Explanation:

given that

Weight of sugar = 2.4 g

Weight if empty flask = 150 g

All we have to do is add the weight of the empty flask with the weight of the sugar.

The sugar would be put inside an empty flask. This means that it's weight with that of the empty flask would be their new weight. Thus, the new weight is

New weight = weight of empty flask + weight of sugar

New weight = 150 g + 2.4 g

New weight = 152.4 g

therefore, the new weight is 152.4 g.

I hope this helps you

152.4 g

Given:-

Weight of sugar = 2.4 g

Weight if empty flask = 150 g

Add the weight of the empty flask with the weight of the sugar.

The sugar would be put inside an empty flask. This means that it's weight with that of the empty flask would be their new weight. Thus, the new weight is as follows:-

[tex]New weight = weight of empty flask + weight of sugar\\New weight = 150 g + 2.4 g\\New weight = 152.4 g[/tex]

 Therefore, the expected weight is 152.4 g.

To know more about:-

brainly.com/question/20630618

The element phosporus is located to the right of the element magnesium along the same period in the periodic table.

Answers

I’m assuming this is a true and false question. The answer is true. Phosphorus has a larger atomic mass. Phosphorus is number 15 on the periodic table. Phosphorus is a non-metal.

PLEASE PLEASE HELP!! A pipe drips at 155mL/day- convert this rate to gallons/day (1gal=3.785L)

Answers

1 mL =[tex]10^{-3}[/tex] L

so $155$ mL =$155\times10^{-3}$ L

Now, $1$ gallon = $3.785$ L , or $1$ L= $\frac1{3.785}$ gallons

so $155\times10^{-3}$ L= $155\times10^{-3}\times \frac{1}{3.785}=40.95\times 10^{-3}$ gallons

and this is for each day, so just divide by 1 (day) to get the ratw gallons/day

i.e. $40.95\times 10^{-3}$ gal/day

Which of the following describes the entropy change as a solution is made
from a liquid and solid?
O A. AS = 0
O B. ASAH
C. AS< 0
D. AS> 0​

Answers

Answer:

S>O.

Explanation:

Chemical changes can reduced entropy in an open system. When gas turns into a liquid or when a liquid turns into a solid; entropy is reduced. hope this helps you :)

How many primary,secondary and Tertiary carbons are in the compound. 2,3-dimethyl pentane. And
How many primary hydrogen

Answers

Answer:

5 primary carbon atoms

3 secondary carbon atoms

4 tertiary carbon atoms

6 hydrogen atoms

A cylinder containing 14.71 L of helium gas at a pressure of 169.1 atm is to be used to fill toy balloons to a pressure of 1.086 atm. Each inflated balloon has a volume of 2.414 L. What is the maximum number of balloons that can be inflated? Report your answer to 1 decimal place. (Remember that 14.71 L of helium at 1.086 atm will remain in the exhausted (empty) cylinder)

Answers

Answer:

The number of balloons is 948.8.

Explanation:

The number of balloons can be calculated as follows:

[tex] N = \frac{V_{f}}{V_{T}} [/tex]

Where:

[tex]V_{f}[/tex]: is the volume at 1.086 atm

[tex]V_{T}[/tex]: is the balloon volume = 2.414 L  

The volume at 1.086 atm can be found using Boyle's law:

[tex] P_{i}V_{i} = P_{f}V_{f} [/tex]

[tex] V_{f} = \frac{P_{i}V_{i}}{P_{f}} = \frac{169.1 atm*14.71 L}{1.086 atm} = 2290.5 L [/tex]

Now, the number of balloons is:

[tex] N = \frac{V_{f}}{V_{T}} = \frac{2290.5 L}{2.414 L} = 948.8 [/tex]

Therefore, the number of balloons is 948.8.

I hope it helps you!        

Shalom, Guys!
The molar mass of strontium (\ce{Sr}SrS, r) is \pu{87.62 g/mol}87.62 g/mol87, point, 62, space, g, slash, m, o, l. Calculate the number of atoms in a \pu{67.5 mg}67.5 mg67, point, 5, space, m, g sample of \ce{Sr}SrS, r. Write your answer in scientific notation using three significant figures. \text{atoms Sr} ______________ atoms Sr
Love, Piper Rockelle

Answers

Answer:

4.30 × 10²⁰ atoms

Explanation:

You need to find out how many moles you have.  First, convert milligrams to grams.

62.5 mg × (1 g)/(1000 mg) = 0.0625 g

Next, use the molar mass to convert from grams to moles.

0.0625 g ÷ 87.62 g/mol = 7.13 × 10⁻⁴ mol

To convert from moles to atoms, you need to use Avogadro's number (6.022 × 10²³).  Avogadro's number is the number of atoms in a mole.

7.13 × 10⁻⁴ mol × 6.022 × 10²³ atoms/mol = 4.296 × 10²⁰ ≈ 4.30 × 10²⁰ atoms

You will have 4.30 × 10²⁰ atoms of strontium.

The number of Strontium atoms are 4.30 × 10²⁰ atoms

Given:

Mass of Strontium = 62.5 mg × (1 g)/(1000 mg) = 0.0625 g

Molar mass of Strontium = 87.62 g/mol

To find:

Moles of Strontium = ?

Number of moles:

It is defined as given mass over molar mass.

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}\\\\\text{Number of moles}=\frac{0.0625 g}{87.62 g/mol }\\\\\text{Number of moles}=7.13 * 10^{-4} mol[/tex]

Avogadro's number is the number of atoms in a mole (6.022 * 10²³)

Conversion of moles into atoms:

[tex]7.13 × 10^{-4} mol * 6.022 * 10^{23} atoms/mol \\\\\text{ Sr atoms}= 4.296 * 10^{20} = 4.30 * 10^{20} atoms[/tex]

Thus, Strontium atoms will be 4.30 × 10²⁰ atoms.

Find more information about Number of moles here:

brainly.com/question/15356425

The table describes how some substances were formed.
Substance
P.
Q
Description
Formed by boiling pure water
Formed by combining three hydrogen atoms to every nitrogen atom
Formed by adding 5 g of sugar to 1 L of water
Formed by compressing carbon under high pressure
R
S
Based on the given descriptions, which substance is most likely a mixture?
P
Q
R
S

Answers

Explanation:

Which is a pure substance?

1. soda

2. gasoline

3. salt water

4. carbon dioxide

carbon dioxide

Bromine, a liquid at room temperature, has a boiling point of 58°C and a melting point of -7.2°C. Bromine can be classified as a

1. compound.

2. impure substance.

3. mixture.

4. pure substance.

pure substance.

Answer:

the answer is

Explanation:

Sugar and water make a homogeneous mixture (the same proportions of its components throughout any given sample).

16. I don't want to go anywhere apart from
Nairobi.
A. instead
B. only
C. besides
D. than​

Answers

[tex]\huge\red{AnsweR:}[/tex]

I don't want to go anywhere apart from than Nairobi.

[tex]<font color=orange>[/tex]

A. instead

B. only

C. besides

D. than

_______________________

#Be Brainly

C. is the best answer

“Besides, I don’t want to go anywhere apart from Nairobi”

Hope this helped -з-

What is Mendeleev’s Periodic Law? How many elements were classified by Mendeleev?

Answers

Answer:

1.the law that the properties of the elements are periodic functions of their atomic numbers. Also called Mendeleev's law. (originally) the statement that the chemical and physical properties of the elements recur periodically when the elements are arranged in the order of their atomic weights.

Explanation:

2.Mendeleev’s Periodic Law states that the properties of elements are the periodic function of their relative atomic masses. Mendeleev arranged all 63 elements; which were discovered till his time; in the order of their increasing relative atomic masses in a tabular form. It is known as Mendeleev’s Periodic Table.

how many primary carbon are in 2,3 dimethylpentane​

Answers

Answer:

There are 7 carbons in 2,3 dimethylpentane

Explanation:

Because 2,3-dimethlypentane is an organic compound of carbon and hydrogen with formula C7H16

Which statements describe a good hypothesis? Check all that apply.
A good hypothesis is based on one's personal opinion.
A good hypothesis can be tested.
A good hypothesis leads to a test with measureable results.
A good hypothesis does not always have to be based on prior knowledge or research.
A good hypothesis provides a possible explanation to answer a scientific question.

Answers

Answer:

- A good hypothesis can be tested.

- A good hypothesis provides a possible explanation to answer a scientific question.

- A good hypothesis does not always have to be based on prior knowledge or research.

Explanation:

The reason being because hypothesis are questions asked before the experiment. They usually involve the testable question and the experiment answers it, but not always. A good hypothesis doesn't need to have accurate results.

Answer:B : A good hypothesis can be tested. C:A good hypothesis leads to a test with measurable results. E: A good hypothesis provides a possible explanation to an answer a scientific question ( B, C, E)

Explanation:Just took the (Assignment) quiz

does the tendency to gain electrons decrease as we go down grp 17?

Answers

Explanation:

Hi, there!!!!

Let me simply clear you..

Yes,The tendency to gain electrons (in nonmetal) decreases when we go down group 17.

The reason for above answer is when we go downwards in periodic table then the atomic size increases with the addition of number of shells and force of attraction between the nucleus and valance shell decreases. The force of attraction between the nucleus and valance shell becomes weaker due to which the force of attracting the electrons gets decreased.

So, we can say that the tendency to gain electrons decreases as we go down in periodic table.

Hope it helps....

Question 4 of 20:
Select the best answer for the question
4. Which of the following is a design theory from the 1980s that uses mathematics to guide computer-aided design
O A. C-K Theory
O B. General Design Theory
O C. ASE
O D. TRIZ

Answers

general design theory

It is, general design theory introduced in 1980s that uses mathematics to guide computer - aided design. Hence, option B is correct.

What is general design theory ?

A variety of new design theories were developed in the 1980s as a result of technology developments like computer-aided design (CAD). The 1981 article "General design theory and a CAD system" by Hiroyuki Yoshikawa contains one of the early references to GDT.

Yoshikawa's theory "ultimately aims at elucidating the human capacity for designing in a scientific fashion, while simultaneously producing the practical information about design technique.

Many different approaches and interpretations of design theory have been made, ranging from personal statements of design principles made by designers, to philosophical conceptions of design, to a search for a design science using advanced mathematics. Hence, option B is correct.

Find more on general design theory:

https://brainly.com/question/14165397

#SPJ7

anyone knows how to do this-

Answers

Explanation:

The number of protons in the element C^12 (Carbon) is 6, number of electrons 12 and number of Neutrons is 6, same as the number of protons it contains

C^13 has 13 electrons, 6 protons and 7 Neutrons this one's neutron number is different from proton number because it's an isotope

Na^-1 has gained an electron so the number of electrons it has = 24 and the number of protons shown as 11 which means there are 23 - 11 = 12 Neutrons

O^-2 has gained two electrons and got 18 electrons in total, 8 protons and 8 neutrons

According to the table, a 23-30 watt CFL provides __________ lumens and is equivalent to a ________ incandescent bulb.

Answers

Answer:

The correct options are;

1. 1,600

2. 100 Watts

A 23-30 watt CFL provides 1,600 lumens and is equivalent to a 100 Watts incandescent bulb

Explanation:

Brightness is measured in lumens and watts measure energy usage therefore with the use of an energy saving light bulb, the same lumination can be obtained at a lower energy usage.

According to a comparison chart for LED Lights vs. Incandescent Light Bulbs vs. Compact Fluorescents (CFLs) from USAI lightening website 23-30 watts CFL has a light output of 1,600 and is therefore produces enough light as a 100 Watts Incandescent Light Bulb

Also according to energy.gov website, CFLs save up to 75% energy such that a 23-30 watt CFL can produce the same illumination as a 100 watt incandescent bulb

Therefore we have, a 23-30 watt CFL provides 1,600 lumens and is equivalent to a 100 Watts incandescent bulb.

Answer:

1600 lumens, 100 watt incandescent

Explanation:

100% on edge (:

Draw the geometric, linkage, and ionization isomers for [CoCl5CN][CN].

Answers

Answer:

See explanation

Explanation:

The formation of isomers is common to octahedral complexes. Isomers are different compounds with the same molecular formula but different structural formulas. Isomers have different atom to atom connections. Werner's complexes can display; polymerization, ionization, linkage, geometric and optical isomerism among others.

Isomers of coordination compounds are not easily recognizable and not easily separable in the laboratory.

The geometric, linkage and ionization isomers of the complex given in the question are shown below.

1.) Given 30 grams of CO2, how many moles of CO2 would you have? How many individual molecules of CO2 is that?
2., Given 22 Grams of NaCl, How many moles of Nacl would you have? How many individual molecules of NaCl is that?
3.) Given 50 grams of ammonia NH3, How many moles of NH3 would you have? How many Molecules of NH3 is that?​

Answers

Answer:

1a) .68 moles 1b)4.1E-23 molecules.

2a) .37 moles 2b) 2.27E-23 molecules

Explanation:

1a) CO2 is equal to 44 grams (C→12 grams,O→16 grams[·2]) .30g/44g is .68 moles.

1b) multiply 1A by advogadros number (6.022E-23)

2a) NaCl is 58 grams. 22/58 is .37 moles.

2b) multiply 2A by advogadros number.

you'd answer #3 the same way #1 and #2

The branch of science that deals with chemicals and bonds are called chemistry. The moles are units to calculate the quantity required to use the element.

The correct answer is mentioned below.

What are moles?The mole is the base unit of the amount of substance in the International System of Units (SI). It is defined as exactly 6.02214076×10^23 elementary entities which may be atoms, molecules, ions, or electrons.

According to the question, the moles to the option is as follows:-

moles of 30 grams of CO2 is

[tex]n =\frac{M}{M.M}\\ \\\frac{30}{44} \\\\=0.681\\\\[/tex]

The number of molecules is [tex]0.68 *6022*10^{23} =4.09496*10^{23[/tex].

2. moles of 22 grams of NaCl is

[tex]\frac{22}{44}\\ \\=0.5\\\\[/tex]

Molecules will be [tex]0.5*6.022*10^{23} = 3.011*10^{23}[/tex]

3. moles of 50-gram ammonia

[tex]\frac{50}{17} \\\\2.94\\[/tex]

The number of molecules is [tex]2.94*6.022*10^{23} = 1770*10^{23[/tex]

For more information about the moles, refer to the link:-

https://brainly.com/question/15209553

Sulphur dioxide is a common pollutant from burning coal.State two effects caused by this pollutant and also write the chemical equation.

Answers

Heya!

Sulfur dioxide - ( SO2 )

Answer:

Sulfur dioxide is a common pollutant caused due to the burning of coal,Is very harmful for the environment and health.

Effects:

Health effects-Sulfur dioxide effects the respiratory system which includes the functioning of lungs,respiratory track and causes infections,can also effect  and irritate the eyes and causes aggravating conditions such as asthma and chronic bronchitis.As most sulfur dioxide air pollution comes from the burning of coal and oil in power plants. It is a emitted by trains, large ships and other diesel objects that burns alota   sulfur fuel so this also effects the environment like plants and others as the air lacks oxygen ,but with more sulfur dioxide.

Hope this helps!

Have a nice day!:)


3. why are fire tornadoes rare ?


Answers

True fire tornadoes have only been documented now twice. and once in Canberra, Australia during 2003. of this tornado. Then, updraft is simply a rising current of air.

156. A solid metal sphere has a volume of 4.2 ft}. The mass
of the sphere is 155 lb. Find the density of the metal
sphere in grams per cubic centimeter.

Answers

Answer:

The answer is

0.59 g/cm³

Explanation:

To find the density of the sphere we use the formula

[tex]Density \: = \frac{mass}{volume} [/tex]

To find the density in g/cm³ first convert the mass into grams and the volume into cm³

For the mass we have

155 lb = 70306.82 g

For the volume

4.2 ft³ = 118930.76 cm³

Substitute the values into the above formula

That's

[tex]Density \: = \frac{70306.82 \: g}{118930.76 \: cm³} [/tex]

We have the final answer as

Density = 0.59 g/cm³

Hope this helps you

What does light travel in?

Answers

Answer:

Light travels as a wave.

Explanation:

But unlike sound waves or water waves, it does not need any matter or material to carry its energy along. This means that light can travel through a vacuum—a completely airless space. (Sound, on the other hand, must travel through a solid, a liquid, or a gas.)

Light speed is fastest
Other Questions
Exercise 2.4.5: Suppose we add possible friction to Exercise 2.4.4. Further, suppose you do not know the spring constant, but you have two reference weights 1 kg and 2 kg to calibrate your setup. You put each in motion on your spring and measure the frequency. For the 1 kg weight you measured 1.1 Hz, for the 2 kg weight you measured 0.8 Hz. a) Find k (spring constant) and c (damping constant). Find a formula for the mass in terms of the frequency in Hz. Note that there may be more than one possible mass for a given frequency. b) For an unknown object you measured 0.2 Hz, what is the mass of the object? Suppose that you know that the mass of the unknown object is more than a kilogram. How has your learning inside and outside of the classroom changed your perspective about experiences you have in school and life in general Which word of this sentence is not correct? Yo soy senor Quintana; me llamo Maria Quintana? A. Yo B. Me C. Senior D. Soy 1. The "four Ms" of cause-and-effect diagrams are:______. a. mentality, motivation, management, and manpower. b. material, methods, men, and mental attitude. c. material, machinery/equipment, manpower, and methods. d. material, management, manpower, and motivation. e. named after four quality experts. 2. A Systematic Approach to Capacity Decisions includes:A. Evaluate the alternativesB. Identify gapsC. Estimate capacity requirementsD. Develop alternativesE. All are correct How many unit cubes would it take to completely fill the prism with no gaps between unit cubes? When you roll two number cubes, what are the odds, in simplest form, in favor of getting two numbers less than 3? A. 1:8 B. 8:1 C. 1:9 D. 9:1 Factor completely 2c5 + 44c4 + 242c3. 2c3(c + 11)2 2(c + 11)2 2c3(c + 11)(c 11) 2c3(c2 + 22c + 121) A newly formed firm must decide on a plant location. There are two alternatives under consideration: locate near the major raw materials or locate near the major customers. Locating near the raw materials will result in lower fixed and variable costs than locating near the market, but the owners believe there would be a loss in sales volume because customers tend to favor local suppliers. Revenue per unit will be $172 in either case.Omaha Kansas CityAnnual fixed costs ($ millions) $1.0 $1.1Variable cost per unit $30 $45 Expected annual demand (units) 9800 11,625 Required:Using the above information, determine what the profit would be for Kansas City. "In the long-run, monopolistically competitive firms: have excess capacity. produce at the minimum of average total cost. charge prices equal to marginal cost. both B and C are true." If x =2.3,5x.3= DONT MAKE ANSWERS THAT DONT MAKE ANY SENSE OR YOU WILL GET REPORTED Factor 2x2 4x 30 completely. (5 points) 2(x 5)(x + 3) 2(x 3)(x + 5) (2x + 3)(x 5) (2x 5)(x + 3) The shape on the left is translated to the shape on the right.Which statement about the transformation is true?A.The name of the shape on the right is MNOPQRS' because it is the image of the shape on the left.B.The name of the shape on the right is MNOPORS' because it is the pre-image of the shape on the left.C.The name of the shape on the right is MNOPQRS because it is the pre-image of the shape on the left.D. The name of the shape on the right MNOPQRSBecause it is the pre-image if the shape in the left. How many sections are there in a Spanish/English dictionary? Who was America's first president What was the result in the case of U.S. v. Park, the case in which the defendant, the president of a national food-chain corporation, claimed he should not be held liable for allowing food in a warehouse to be exposed to rodent contamination because he had delegated responsibility to subordinates Tarea: Escribe lo que opinas sobre las ideas/los sentimientos que t piensas que el autor est tratando de expresar en su poema. Ests de acuerdo o no? Por qu? Inhabitants of the prehistoric are not considered ancestors of humans true or false If Sheridan Company issues 7500 shares of $10 par value common stock for $375000, the account Paid-in Capital in Excess of Par Value will be credited for $75000. Common Stock will be credited for $75000. Cash will be debited for $300000. Paid-in Capital in Excess of Par Value will be credited for $375000. How many liters of a 35% salt solution must be mixed with 20 liters of 70% salt solution to obtain a solution that is 45% salt? What is the equation? You know that the average college student eats 0.75 pounds of food at lunch. If the standard deviation is 0.2 pounds of food, then what is the total amount of food that a cafeteria should have on hand to be 90 percent confident that it will not run out of food when feeding 50 college students?