Light of 650 nm wavelength illuminates a single slit of width 0.20 mm. (Figure 1) shows the intensity pattern seen on a screen behind the slit. You may want to review (Pages 941 - 943) . Figure1 of 1The graph shows intensity as a function of distance. Distance is measured from 0 to 3 centimeters on the x-axis. No values or units are given for the intensity on the y-axis. A large central peak is positioned at 1.5 centimeters with much smaller secondary and tertiary peaks flanking it. The width of the central peak is 1 centimeter. The secondary peaks are positioned at approximately 0.67 centimeters and 2.3 centimeters. The graph shows intensity as a function of distance. Distance is measured from 0 to 3 centimeters on the x-axis. No values or units are given for the intensity on the y-axis. A large central peak is positioned at 1.5 centimeters with much smaller secondary and tertiary peaks flanking it. The width of the central peak is 1 centimeter. The secondary peaks are positioned at approximately 0.67 centimeters and 2.3 centimeters.
Part A What is the distance to the screen? Express your answer to two significant figures and include the appropriate units.

Answers

Answer 1

The intensity pattern visible on a screen behind the slits can be stated to depend on the screen's distance (d=1.168m).

How to solve ?

From the question we are told,

Two slits that are 0.20 mm apart are illuminated by 650 nm light. The intensity pattern shown on a screen behind the slits is depicted in (Figure 1).

Typically, the mathematical formula for the distance is as follows:

[tex]d = \sqrt{(x_2 - x_1)^2 + (y_2-y_1)^2}[/tex]

d=0.33x10^-2x0.23x10^-3/650x10^-9

d=1.168m

What purpose does the distance formula serve?

The distance formula is a formula used to determine how far apart two places are from one another. The dimensions of these points are unlimited. For instance, you could need to determine the separation between two points in space, a plane, or a line (1, 2, or 3 dimensions) (3d).

How far is that?

Distance is the overall, directionless movement of an object. Distance can be characterized as the amount of space an object has covered, regardless of the starting or ending location.

Learn more about distance here:

https://brainly.com/question/26711747

#SPJ4


Related Questions

a wire of length l is wrapped into a coil with n turns this coil is then placed in a magnetic field of strength b

Answers

Maximum torque developed is (BIL²/4[tex]\pi[/tex]n).

Torque is a measure of force that can cause an object to rotate about an axis.

A force causes an object to accelerate in linear kinematics. Similarly, torque causes angular acceleration. Torque can therefore be defined as the rotational equivalent of a linear force. The line about which the object rotates is called the axis of rotation. In physics, torque is simply the tendency of a force to rotate or twist.

For any structure such as a solenoid, toroid, and circular arc, the magnetic field at a certain point of the structure is always proportional to the number of turns of the coil.

As we know magnetic field is (BIL²/4[tex]\pi[/tex]n)

2[tex]\pi[/tex]rn = L

r = (L/2[tex]\pi[/tex]n)

A = [tex]\pi[/tex]r²

A = (L²/4[tex]\pi[/tex]n²)

M = niA

M = (iL²/4n[tex]\pi[/tex])

Then Torque is Z = MBSin90°

The question is incomplete, the complete question is "a wire of length l is wrapped into a coil with n turns this coil is then placed in a magnetic field of strength b,  the maximum possible torque developed is?"

To know more about torque,

https://brainly.com/question/14149514

#SPJ4

A roller coaster starts from rest at point A. If you ignore friction and take the zero of potential energy to be at C, A) the kinetic energy of the coaster at D will be equal to its potential energy at A. B) the kinetic energy of the coaster at E will be equal to its potential energy at C. C) the kinetic energy of the coaster at C will be equal to its potential energy at A. D) the kinetic energy of the coaster at B will be equal to its potential energy at C E) None of these is correct. 13. Two objects are sliding at the same speed across a wooden surface. The coefficient of kinetic friction between the first object and the surface is twice that between the second object and the surface. The distance traveled by the first object before it stops is S. The distance traveled by the second object is A) impossible to determine without knowing the masses involved. B) 28 C) S/2 D) S E) 4S 14. A person of weight w is in an upward-moving elevator when the cable suddenly breaks. What is the person's weight measured in the elevator immediately after the elevator starts to fall? A) w B) greater than w C) less than w D) 9.81w E) zero A force F produces an acceleration a on an object of mass m. A force 3F is exerted on a second object, and an acceleration 8a results. What is the mass of the second object? A) 3m B) 9m C) 24m D) (3/8)m E) (8/3)m 15.

Answers

A roller coaster starts from rest at point  is option C) the kinetic energy of the coaster at C will be equal to its potential energy at A.

Since Two objects are sliding at the same speed across a wooden surface. The  distance traveled by the second object is option B) 2S

A person's weight measured in the elevator immediately after the elevator starts to fall is option E) zero A force F produces an acceleration a on an object of mass m.

The mass of the second object is option D) (3/8)m.

What happens when kinetic energy is equal to potential energy?

The amount of kinetic energy change and the amount of potential energy change are identical in all physical processes that take place in closed systems. When the kinetic energy rises, the potential energy falls, and vice versa.

Wave speed is the number of meters a wave travels in a second, or the distance a wave travels in a particular amount of time. Equation Speed = Wavelength x Frequency describes how wave speed relates to wave wavelength and wave frequency.

Therefore, When wavelength and frequency are known potential energy stored energy that depends on the relative positions of different components of a system may be utilized to compute wave speed—this equation can be used to determine wave speed. When stretched or squeezed, a spring has higher potential energy.

Learn more about force from

https://brainly.com/question/14543691
#SPJ1

for a severe supercell ts to form over the great plains, one would expect the 5,000 agl wind to be group of answer choices 360/10 kt 200/15 240/90 190/45

Answers

Note that for a severe supercell ts to form over the great plains, one would expect the 5,000 AGL wind to be 190/45kts (Option D)

What is a supercell?

A supercell thunderstorm is distinguished by the presence of a mesocyclone, which is a deep, continually revolving updraft. As a result, these storms are sometimes known as spinning thunderstorms.

Supercells are storms that have updrafts that spin along a vertical axis and are generally but not always thunderstorms. This rotation is caused by shear in the environmental wind field (a change in wind direction and/or speed with height) that surrounds the storm as it grows.

Supercell thunderstorms are intense, long-lived storms that are characterized by strong wind shear and rotational dynamics.

The wind shear, or the change in wind speed and direction with height, is a key factor in the development and maintenance of supercell thunderstorms.

Note that AGL means Above Ground Level; while

KTS means Knots. Knots are a unit measurement of speed. I nautical mile is usually equated to one knot.

Learn more about Supercells;
https://brainly.com/question/401575?
#SPJ1

Two blocks, with masses indicated in the figure above, are at rest on a horizontal surface and connected by a string of negligible mass and a compressed spring. There is negligible friction between the blocks and the surface. The string is cut, and the spring pushes the blocks away from each other. Which of the following statements are true about the motion of the blocks immediately after the string is cut? select two answers.

Answers

1. The velocity of the center of mass of the two-block system is zero.

2. The magnitude of the acceleration of the left block is greater than that of the right block.

The center of mass, or balancing point, of a distribution of mass in space is the only location where the total of the weighted relative positions of the distributed mass equals zero. In order to accelerate linearly without also accelerating angularly, a force might be applied at this moment. Using the center of mass as a reference point simplifies calculations in mechanics quite a bit. To imagine how an object would move, one can imagine a hypothetical location where the object's total mass is concentrated. To apply Newton's equations of motion to a particular object, the center of mass is the particle equivalent of that thing.

Learn more about center of mass here:

https://brainly.com/question/27549055

#SPJ4

In a mass spectrometer, a specific velocity can be selected from a distribution by injecting charged particles between a set of plates with a constant electric field between them and a magnetic field across them (perpendicular to the direction of particle travel). If the fields are tuned exactly right, only particles of a specific velocity will pass through this region undeflected. Consider such a velocity selector in a mass spectrometer with a 0.105 T magnetic field. 50% Part (a) What electric field strength, in volts per meter, is needed to select a speed of 3.9 x 10 m/s? Grade Summary Deductions 090 Potential 100% sino cos tan) cotan asino acos atan) acotan sinho cosho tanho) cotanho Degrees Radians 7 8 9 E4 5 6 1 2 3 0. VOCAL Submissions Attempts remaining 20 per attempt) detailed view Submit Hint French I give up! Hints: O deduction per hint. Hints remaining 2 Feedback: deduction per feedback 50% Part (b) What is the voltage, in kilovolts, between the plates if they are separated by 0.95 cm?

Answers

The electric field strength in volts per meter is calculated to be 4.095 V/m.

Given that, speed v = 3.9 * 10 m/s

Magnetic field B = 0.105 T

Using the mass spectrometer velocity selector relationship between the electric field and magnetic field is,

v = E/B

Where,

v is the speed selector

B is magnetic field

E is electric field

Therefore, E = vB

E = 3.9 × 10 × 0.105

E = 4.095 V/m

Thus, electric field E is 4.095 V/m.

The question is incomplete. The complete question is 'What is the electric field strength in volts per meter?'

To know more about electric field:

https://brainly.com/question/15414535

#SPJ4

(a) Find the amplitude, frequency, and period of motion for an object vibrating at the end of a horizontal spring if the equation for its position as a function of time is the following. x = (0.225 m) cos ???? 8.00 t A = m f = Hz T = s (b) Find the maximum magnitude of the velocity and acceleration. vmax = m/s amax = m/s2 (c) What are the position, velocity, and acceleration of the object after 1.45 s has elapsed? x = m v = m/s a = m/s2

Answers

When a function p(x) determines location, the velocity and acceleration are its first and second derivatives, respectively.

The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s2). Since acceleration is a vector quantity, both its magnitude and its direction are included. The speed and direction of an object's motion are its velocity. Alternatively put, velocity is the pace at which an object's position changes (where position incorporates direction by specifying whether the object is moving backwards or forwards on a line, or moving sideways or up and down in two or three dimensions).

to know more about acceleration please visit.

https://brainly.com/question/12550364

#SPJ4

what should be the value of 'x' such that the mass то exerts a force of mg on the inclined surface at P. (N=mg)​

Answers

The value of 'x' such that the mass то exerts a force of mg on the inclined surface at P. (N=mg)​ is given by

x = N / (mg cos θ)

What is value of 'x'?

Generally, To determine the value of 'x', you need to know the angle of inclination of the surface and the mass of the object. The force of gravity (N) acting on the object is equal to the mass of the object (m) multiplied by the acceleration due to gravity (g). The force of gravity is also equal to the normal force (N) exerted by the surface on the object, which is perpendicular to the surface.

If the surface is inclined at an angle θ with respect to the horizontal, the normal force will be equal to the component of the force of gravity along the surface. This component can be calculated using the formula N = mg cos θ, where θ is the angle of inclination and m is the mass of the object.

Therefore, to determine the value of 'x', you need to solve the equation N = mg cos θ for 'x'. To do this, you can rearrange the equation to solve for x:

x = N / (mg cos θ)

Substituting the values of N, m, and θ into this equation will give you the value of 'x' that you are looking for.

Read more about mass of the object.

https://brainly.com/question/6240825

#SPJ1

A potato falling vertically downward is struck by a dart that is traveling vertically upward, as shown above. The dart and potato then collide, stick together, and continue moving after the collision.The weight of the dart is W. Which of the following claims best describes the magnitude of the net force on the dart immediately before, during, and immediately after the collision with the potato?

Answers

Option B is Correct

The velocity of the center of mass remains constant before the collision, when they collide there is a slight decrease in kinetic energy of the system since the collision is inelastic, resulting in a slight decrease of velocity, afterwards the velocity is constant again.

Velocity is the directional velocity of a moving object, observed from a given frame of reference and indicating the rate of change of position measured at a given time reference (eg 60 km/h northward). Velocity is a fundamental concept in kinematics, a branch of classical mechanics that describes the motion of bodies.

Velocity is a physical vector quantity. Both magnitude and direction are required to define it. The scalar absolute value (magnitude) of velocity is called velocity, and its magnitude is a consistent derived unit measured in the SI (metric) system as meters per second (m/s or m⋅s−1). For example, " meters/second" is a scalar, but "5 meters/second east" is a vector. An object is said to be accelerating if its velocity, direction, or both change.

Learn more about velocity here : https://brainly.com/question/24445340

#SPJ4

a cellist tunes the c-string of her instrument to a fundamental frequency of 65.4 hz. the vibrating portion of the string is 0.615 m long and has a mass of 14.8 g .

Answers

(A) With 268.94 N tension must she stretch it.

26% increase in tension is needed to increase the frequency from 65.4 Hz to 73.4 Hz, corresponding to a rise in pitch from C to D.

Part (A)

Fundamental frequency =f0= 65.4 Hz.

The length of the vibrating portion of the string = l = 0.615 m

Mass= m = 14.8 g

We know, [tex]f_0 = \frac{v}{2l}[/tex]

So, the value of v will be 65.4*2*0.615 = 80.442 m/s

As, We know,

[tex]T=\frac{v^2}{\frac{m}{l}}[/tex]

So, the value of tension will be: [tex]\frac{80.442^2}{\frac{14.8}{0.615}}=\frac{6470.91}{24.06}=268.94\:N[/tex]

Part (B)

Fundamental frequency =f0= 73.4 Hz.

The length of the vibrating portion of the string = l = 0.615 m

Mass= m = 14.8 g

We know, [tex]f_0 = \frac{v}{2l}[/tex]

So, the value of v will be 73.4*2*0.615 = 90.282 m/s

As, We know,

[tex]T=\frac{v^2}{\frac{m}{l}}[/tex]

So, the value of tension will be: [tex]\frac{90.282^2}{\frac{14.8}{0.615}}=\frac{8150.8395}{24.06}=338.77\:N[/tex]

So, the percentage increase in tension will be [tex]\frac{338.77-268.94}{268.94}\times 100\%=25.96\% \approx 26\%[/tex]

For more questions on Fundamental frequency https://brainly.com/question/1967686

#SPJ4

The complete question should be:

a cellist tunes the c-string of her instrument to a fundamental frequency of 65.4 hz. the vibrating portion of the string is 0.615 m long and has a mass of 14.8 g .

Part A: With what tension must she stretch it?

Part B

What percent increase in tension is needed to increase the frequency from 65.4 Hz to 73.4 Hz, corresponding to a rise in pitch from C to D?

- A basketball strikes the rim of the basket. Explain each force in the force pair.

Answers

A basketball experiences four forces as it soars through the air. The ball is being pulled down to the Earth by gravity, being propelled upward by buoyancy, and slowed down due to the drag force created by the air it collides with.

What is force ?

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

For instance, a basketball will strike the ground hard when it is dribbled. The ground's force on the ball is balanced by this force of the ball on the ground. The ball is sent upwards by the second force since it acts in the opposite direction. There are numerous characteristics of motion that depend on this interaction.

Thus, A basketball experiences four forces as it soars through the air.

To learn more about force, follow the link;

https://brainly.com/question/13191643

#SPJ1


Which statement best explains the purpose of making the loop of wire turn between the permanent magnets in an electric generator?
OA. The magnetic fields of the magnets cause electric charges in the
moving wire to flow.
B. The poles of the magnets reverse while the loop of wire is in
motion.
OC. The electric charges in the loop are repelled if the loop of wire
stops turning.
D. The electric current in the loop causes a magnetic field to form
around the moving wire.

Answers

Answer: C

Explanation:

Enjoy <3

Suppose a rocket is fired vertically upward from the surface of the earth with one-half of the esacpe speed. How far from the center of the earth will it reach vefore it begins to fall back?
(let g = 9.8 m/s^2 and Re = 6370 km)
A. 1.3 * 104 km
B. 8.5 * 103 km
C. 9.6 * 103 km
D. 2.6 * 104 km
E. 1.9 * 104 km
The correct answer: B.
I do not understand why I am not getting the correct answer.

Answers

The distance before it falls back to the earth is 8.5 * 103 km. Option B

What is the escape velocity?

We know that the escape velocity has to do with the velocity that has to be supplied to a material so that the material can be able to escape from the earth's gravitational pull. Let us recall that the whole earth is a large gravitational field. If we throw an object up then the object would have to certainly fall doen to the ground under the influence of gravity.

It is therefore clear that gravity is the force that draws any object that  goes upwards down back to the ground. Given that we have been told here that the speed is  one-half of the escape speed, then then the magnitude of the speed is 5590.3 m/s.

Given that;

v^2 = u^2 - 2gh

v = final velocity

u = initial velocity

g = acceleration due to gravity

h = height

Then;

u^2 = 2gh

h = u^2/2g

h = ( 5590.3)^2/2 * 9.8

=  8.5 * 103 km

Learn more about escape velocity:https://brainly.com/question/14297933

#SPJ1

in 1.8 hours a sailboat sailed 81 kilometers east across the sea at a constant velocity. what was the sailboats velocity?

Answers

The velocity of the sailboats at sailed a distance of 81 km is 12.5 m/s.

What is velocity?

Velocity is the rate of change of displacement.

To calculate the velocity of the sailboats, we use the formula below.

Formula:

v = d/t................. Equation 1

Where:

v = Velocity of the sailboatsd = Distancet = Time

From the question,

Given:

d = 81 km = 81000 mt = 1.8 hours = 1.8×60×60 = 6480 s

Substitute these values into equation 1

v = 81000/6480v = 12.5 m/s

Hence, the velocity is 12.5 m/s.

Learn more about velocity here: https://brainly.com/question/24445340

#SPJ1

which of the following vectors best describes the path of the airplane? question 6 options: none of these

Answers

The following vectors best describes the path of the airplane Aniseed of the as plan is 528 [tex]\mathrm{mi} / \mathrm{hr}[/tex]

What is airplane?

A fixed-wing aircraft that is pushed forward by the thrust of a jet engine, propeller, or rocket engine is known as an aeroplane or aeroplane. There are many different sizes, forms, and wing arrangements for airplanes.

[tex]\text { bearing } 25^{\circ} \text { west of north }[/tex]

[tex]\text { Since } \quad 90^{\circ}+25^{\circ}=115^{\circ}[/tex]

[tex]\text { so path of the airplane is }[/tex]

[tex]\left.v=528 \cos \left(i 15^{\circ}\right) i+528 \sin \left(115^{\circ}\right)\right][/tex]

To learn more about airplane visit

https://brainly.com/question/17247837

#SPJ4



A gymnast uses a flexible stick to jump over the bar. Which of the following
describes energy changes when he reaches the highest point of his jump?

Answers

When the gymnast starts to jump his potential energy starts to convert to kinetic energy. But when he reaches the maximum height and stop there for seconds, potential energy regains. Thus, option C is correct.

What is potential energy?

Potential energy of an object is the energy stored in it by virtue of its position. Potential energy increases with increases in mass and height which is clear from the equation for potential energy

p = mgh

Kinetic energy is generated by motion of the object. Thus, only a moving body attains a kinetic energy. Kinetic energy depends on the mass and velocity of the object.

Here, the gymnast gains a kinetic energy when he starts to jump from rest. But, when he reaches the maximum height where the speed slows down, his kinetic energy converts to potential energy. Thus, option C is correct.

To find more on kinetic energy, refer here:

https://brainly.com/question/26472013

#SPJ1

#SPJ1

Your question is incomplete. But your complete question probably was:

A gymnast uses a flexible stick to jump over the bar. Which of the following

describes energy changes when he reaches the highest point of his jump?

A) kinetic- potential- potential

B) kinetic- potential- kinetic

C) potential - kinetic – potential

D) potential- potential- kinetic

A wire is formed into a circle having a diameter of 20.0 cm and placed in a uniform magnetic field of 2.50 mT. The wire carries a current of 5.00 A.
(a) Find the maximum torque on the wire.
_____ µN·m
(b) Find the range of potential energies of the wire-field system for different orientations of the circle.
minimum
_____µJ
maximum
_____ µJ

Answers

The maximum torque on the wire is 392.3 µN·m and the range of potential energy is -392.3µN·m(minimum) to +392.3µN·m(maximum)

Torque: Torque is a measure of the force that can cause an object to rotate about an axis. It is a vector quantity.

Given that,

diameter D=20cm

Radius r =10cm

magnetic field B =2.5mT

current I=5A

Torque= n×B

           =nBsinФ

torque=nB= NIAB

                 = 1×5×π×[tex]10^{2}[/tex]×[tex]10^{-4}[/tex]×2.5×[tex]10^{-3}[/tex]

                 = 39.23×[tex]10^{-5}[/tex]

                 = 392.3µN·m

minimum potential energy= -nB= -392.3µN·m

maximum potential energy =+nB= +392.3µN·m

Therefore the maximum torque on the wire is 392.3 µN·m when is placed in an uniform magnetic field of 2.50mT and the range of potential energy is -392.3µN·m(minimum) to +392.3µN·m(maximum)

Learn more about torque:

https://brainly.com/question/20691242

#SPJ4

A converging lens with a focal length of 40 cm and a diverging lens with a focal length of -40 cm are 160 cm apart. A 2.5 cm-tall object is 60 cm in front of the converging lens.
Calculate the image position. cm in front of the second lens.
Calculate the image height.

Answers

1.25 cm is the height of the image. 160 cm separates a converging lens with such a 40 cm focal length from a diverging lens with the a -40 cm focal length. The converging lens is 60 cm away from a 2.5 cm tall item.

What does a converging or diverging lens mean?

A lens that conforms a parallel source beam of light is known as a converging lens. One kind of converging lens is a double convex lens. Converging Lens A lens that separates a parallel light beam is known as a diverging lens. Diverging lenses include those that are double concave.

For the diverging lens, this image height corresponds to object height. We obtain h ′D=(20cm40cm)(5.0cm)=1.25cm again for diverging lens as a result.

To know more about  converging lens visit:

https://brainly.com/question/28348284

#SPJ4

A pulley system is used to lift up a 90N boulder. What is the mechanical advantage if you only need to use 15N of force to lift the boulder?

Answers

By simply creating more loops or pulleys, the pulley system's mechanical advantage can be accomplished.

Equation:

It is known that a pulley system can lift a crate with 90 newtons of force. Finding the pulley system's mechanical advantage is important if the input force is 15 newtons.

The force makes the distance longer as though it were working. Mechanical advantage is not greatly affected by the number of pulleys. This is only based on the amount of weight that needs to be lifted.

Therefore,

F1/F2 = 90/15

F1/F2 = 6

Given that the crate's weight is 90 N and the input force is 15 N, this makes sense.

To know more about mechanical advantages, visit:

brainly.com/question/24056098

#SPJ1

A rod has a length 2.0000m at 20.0C. The length of the rod increases to 2.0005

Answers

5.00 × 10-3/K is the coefficient of thermal expansion of the material from which the rod is made as it increases its length to 2.0005m

What is the purpose of the thermal expansion coefficient?

The coefficient of thermal expansion explains how an object's size varies when temperature changes. In particular, it measures the fractional size change per degree change in temperature at constant pressure, where lower coefficients denote a reduced propensity for size change.

What does thermal expansion mean?

The propensity of matter to alter shape, volume, and area in reaction to a change in temperature is known as thermal expansion. The average molecular kinetic energy of a substance has a monotonic relationship with temperature.

How is thermal expansion calculated?

Use the equation for linear thermal expansion ΔL=αLΔT Δ L = α L Δ T to calculate the change in length, ΔL .

How to solve?

Get your rod hot enough to achieve, say, 1% linear thermal expansion.

The rod's dimension has increased to 1.01 units.

The rod is 1.030301 times its original size, or 1.013 larger than it was before heating.

This equals 1.03 when rounded to three major figures. In other words, its volume is 3% higher than that of the cold specimen.

The linear expansion is tripled, or 3%, by the volumetric expansion.

Learn more about Kinetic energy here:

brainly.com/question/26472013

#SPJ1

Complete question:

A rod has a length 2.0000 m at 20.0°C. The length of the rod increases to 2.0005 m when the temperature increases to 40.0°C. What is the coefficient of thermal expansion of the material from which the rod is made?

find the amplitude, frequency, and period of motion for an object vibrating at the end of a horizontal spring if the equation for its position as a function of time is the following.

Answers

The amplitude is 0.25s.

Calculation:

Amplitude = A = 0.225 m

Angular frequency = w = 8π rad/s.

Frequency = f = w/2π = 8π/2πHZ = 4 HZ

Time period = T = 1/f = (1/4)s = 0.25s.

The maximum displacement or distance traveled by a point on an oscillating body or shaft, measured from the equilibrium position. This corresponds to half the length of the vibration path. Amplitude difference between a rest position and maximum shaft deflection.

Frequency The number of waves passing a particular point per second. Duration  How long it takes for a wave cycle to complete. Sound wave amplitude is a measure of wave height. The amplitude of a sound wave can be defined as the magnitude or loudness of the maximum displacement from the average position of the vibrating particles in the medium when the sound was produced.

Learn more about The amplitude here:- https://brainly.com/question/3613222

#SPJ4

The bullet strikes a block of wood which exerts, on average, a force of 50,000 N opposing the motion of the bullet. How far does the bullet penetrate?

Answers

The distance that the bullet penetrates is 0.03m.

How to solve?

Given data:

The mass of the bullet is

m = 25 g = 0.025 kg

The bullet's initial velocity is

u = 350 m/s

The final velocity of the bullet is

v = 0

The average force opposing the motion is

F = 50000N

From Newton's second law, the acceleration derived as,

F = m. a.

a = F. m..........(1)

Substituting values in equation (1), we get:

a = 50000 N / 0.025 kg = 2×106 m/s 2

The equation of motion is,

v 2=u 2−2 a S

2 a S=u 2−v 2

S = u 2−v 2/2 a.......(2)

Substituting values in equation (2), we get:

S = (350 m/s)2−0/2(2×106 m/s 2)

 =12.25×104 m/s 4×106 m/s 2=0.03m

here, the distance that bullet penetrates is 0.03m.

What is the kinetic energy equation?

Kinetic energy has the following formula: K.E. = 1/2 m v 2, where m is the object's mass and v is its square velocity. The kinetic energy is measured in kg/m per second squared if the mass is measured in kg and the velocity is measured in meters per second.

Which 4 forms of kinetic energy are there?

Radiant, thermal, electrical, and mechanical kinetic energies are the basic categories.

Learn more about kinetic energy here:

https://brainly.com/question/17858145

#SPJ1

in the figure, light is incident at angle on a boundary between two transparent materials. some of the light travels down through the next three layers of transparent materials, while some of it reflects upward and then escapes into the air.

Answers

(a) θ5 in the air is 56.9° and (b) θ4 in the bottom material 35.30°. Normally, a light beam that strikes an angle on a prism's refracting face emerges from the opposite face.

How to calculate?

(a) Approximating n=1 for air, we have

n1. sinθ1 = (1)sinθ5 ⇒56.9°=θ5

​and with the more accurate value for n air in Table below, we obtain 56.80.(b) Equation n1 sinθ c =n2 sin 90° leads to,

n1 sinθ 1=n2 ​sinθ2​ =n3​ sinθ 3​ =n4 sinθ 4

​so that. θ4 =sin −1( n1/n4.sinθ 1 )=35.30° .

What does angle of incidence mean?

The angle of incidence is formed by a line drawn perpendicular to the reflecting barrier and the wave's direction of motion.

Is the incidence angle of refraction?

Refraction Depending on the Refractive Indices in the Two Media and the Angle of Incidence. Snell's law states that the angle of incidence, I and the proportion of the refractive indices of the two media that make up the interface determine the angle of refraction, r.

Learn more about refraction here:

https://brainly.com/question/14760207

#SPJ4

a 1.0kg block and a 2.0 kg block are pressed together and both are on a horizontal fricitionless surface with a compressed light spring between them concerning the states of the two blocks after they are released and detached from the spring which of the following statements is correct

Answers

The spring and pan have very little mass. The mass executes a SHM when it is lightly squeezed and then released.

Forces, location, velocity, and energy—both kinetic and potential energy—are some examples of these quantities. Hoare's Rule. Energy conservation: When the compressed spring returns to its natural length, all of the energy that was stored in it is transformed into kinetic energy. The block is propelled along a horizontal surface as the spring is let go. Friction and the spring's bulk can be disregarded. Between two blocks with masses of 1 kg and 2 kg that are lying on a smooth horizontal surface is a compressed elastic spring. The block is freed from rest once the spring has been compressed by 2.0 cm.

to know more about spring please visit.

https://brainly.com/question/14159361

#SPJ4

During the heating season, a damper in the bypass duct is closed to prevent air from passing through the humidifier. Electronic humidistats are equipped with solid-state sensors in place of a hygroscopic element. Evaporative humidifiers contain an element that is kept damp. False

Answers

This statement is False because Solid-state sensors are used in place of a water - absorbing element in electronic humidistats. A damper in the bypassed duct is closed during the summer period to stop airflow.

What is hygroscopic and example?

Hygroscopy - A material is said to be hygroscopic if it has the capacity to adsorb and retain water or water from its immediate surroundings. Examples include ethanol, glycerin, concentrated sulfuric acid, honey, silica gel, and methanol.

How hydroscopic is water?

Around the soil particles, some water in the soil creates an incredibly thin, firmly held layer. It's referred to as hydroscopic water. A little amount of water in the soil is chemically linked to soil components in the soil. We refer to it as mixed water.

To know more about hygroscopic visit:

https://brainly.com/question/15743598

#SPJ4

five coins are stacked in the smooth plastic container. if each coin weighs 0.0235 lb, determine the normal reactions of the bottom coin on the container at points a and b.

Answers

The smooth plastic jar has five pennies placed inside of it. The normal reactions of the bottom coin on the container at locations a and b will be 0.0705 lb and 0.1175 lb respectively if each coin weighs 0.0235 lb.

What does normal force mean?

A contact force, the normal force is often referred to as the normal reaction force. On two surfaces that are not attached to one another, a normal force cannot be applied.

What normal force is present during deceleration?

The body's weight determines the usual deceleration force. A body's position relative to the ground tells us when it is about to fall. The normal force is the portion of a force that is perpendicular to any contact surface.

To learn more about normal force visit:

brainly.com/question/13340671

#SPJ4

A toy spacecraft is launched directly upward. When the toy reaches its highest point, a spring is released and the toy splits into two parts with masses of 0.01 kg and 0.09 kg, respectively. Immediately after the separation, the 0.01 kg part moves horizontally due east. Air resistance is negligible. True statements about the 0.09 kg part include which of the following? I. It could move north immediately after the spring is released. II. It takes longer to reach the ground than does the 0.01 kg part. III. It strikes the ground closer to the launch point than does the 0.01 kg part. (A) I only (B) III only (C) I and II only (D) II and III only (E) I, II, and III

Answers

Air resistance is hardly noticeable. true regarding the 0.09-kilogram component. This causes 0.01kg to land farther from the launch site than 0.09kg did.

0.09kg will move to the west due to momentum conservation (opposite of 0.01 kg). Additionally, since both are at the same height above the ground, it will take them equal amounts of time to descend to the ground.

Allowing v to be the speed of 0.01 kg, which means that the speed of 0.09kg will be smaller than 0.01 kg,

0.01v - (0.09)V = 0

V = 0.01 v/ 0.09 = 0.111v

The speed of 0.09 kg = 0.111v

The speed of 0.09 kg is less than 0.01kg.

Because of this, 0.01kg hits the ground farther from the launch point than 0.09kg did.

The amount of resistance in an electrical circuit represents the resistance to current flow. The Greek letter omega (), which represents resistance, represents ohms. German physicist Georg Simon Ohm (1784–1854), who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm.

Resistance measurements are typically performed in order to evaluate the health of a component or a circuit.

Current flow is inversely correlated with resistance. Conductor damage from corrosion or burning could be one of several potential causes if it is extremely high.

Learn more about resistance here:

https://brainly.com/question/17010736

#SPJ4

The smoke from the Old Man’s furnace travels up from the basement at a velocity of |.5 meters per second. Ralphie is sitting in the kitchen above and can smell the smoke within 6 seconds. What is the approximate distance that the smoke travels up from the furnace?

Answers

The approximate distance that the smoke travels up from the furnace is 9metres.

What is distance?

Distance is described as a numerical or occasionally qualitative measurement of how far apart objects or points are. In the field of physics or everyday usage, distance is usually referred to a physical length or an estimation based on other criteria.

Parameters given:

Velocity = 1.5

time = 6 seconds

We know that distance = speed x time

Hence, distance = 1.5 x 6 seconds

distance = 9 meters.

Distance is a scalar quantity that refers to how much ground an object has covered in the course of its motion while we can describe displacement as a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.

Learn more about distance at: https://brainly.com/question/26046491

#SPJ1

Which of the following is an important difference between the infinite square-well potential and the finite square-well potential?a. The number of energy levels is limited in the infinite square-well potential but not limited in the finite square-well potential.b. The infinite square-well potential utilizes Schrödinger's equation to describe particle motion while the finite square-well potential does not.c. The energy levels are quantized only in the finite square-well potential.d. Particles can exist in classically forbidden regions outside the finite square-well potential.e. Only the energy levels in the finite square-well potential depend on Planck's constant.

Answers

Particles can exist in classically forbidden regions outside the finite square-well potential.

The correct option is D.

What if Planck's constant was zero?

In the absence of quantum effects, everything would be continuous, smooth, and completely predictable in the Newtonian sense. However, we may not be here to get bored with this if Planck's constant were 0.

What use does Planck's constant serve?

At the atomic scale, the behavior of both particles and waves is described by Planck's constant. One of the factors that led to the creation of quantum mechanics is Planck's constant. It was a surprise when those boundaries also turned to represent the limits where known rules of physics applied since the Planck scaled was developed as an universal set of units.

To know more about Planck constant visit:

https://brainly.com/question/2289138

#SPJ4

apply the loop rule to loop 2 (the smaller loop on the right). sum the voltage changes across each circuit element around this loop going in the direction of the arrow. remember that the current meter is ideal.express the voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.

Answers

The voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.ΣΔV = 0 = I3 ⋅ R3 - I2 ⋅ R2.

When applying Kirchhoff's second rule the loop rule we need to identify closed loops and decide whether to loop clockwise or counterclockwise. For example, in Figure 3 the loop was traversed in the same direction as the current.

Loop 1 is the full loop and Loop 2 is the small loop on the right. To apply the loop rule, add all those voltage changes. Kirchhoff's Second Law, also known as Kirchhoff's Voltage Law states that the sum of all voltages around the closed loop of any circuit must be zero. This is a result of charge conservation and energy conservation.

Learn more about The loop rule here:- https://brainly.com/question/15705903

#SPJ4

A single loop of copper wire lying flat in a plane, has an area of 7.80 cm^2 and a resistance of 2.70 Ω A uniform magnetic field points perpendicular to the plane of the loop. The field initially has a magnitude of 0.500 T, and the magnitude increases linearly to 3.50 T in a time of 1.10 s. What is the induced current (in mA) in the loop of wire over this time?

Answers

The induced current in the loop of the copper wire is found to be 7.85 mA.

The single loop of the copper wire is lying in flat plane and the magnetic field is pointing perpendicular to the plane of the loop. The area of the loop is given to be 7.8cm²

The magnetic field initially has a magnitude of 0.500 Tesla and it finally increases manner to grow to a magnitude of 3.50 Tesla in a time 1.10 seconds.

The induced EMF in the circuit will be given by the relation,

E = A∆B/∆T

Where,

B is magnetic field,

A is the area and T is the time taken.

Putting all the values,

E = 0.00078×(3.5-0.5)/1.1

E = 21.2mV.

The resistance in the copper loop is given to be 2.7 ohm.

Now, the induced current in the circuit will be given by the relation,

I = E/R

Putting all the values

I = 21.2/2.7

I = 7.85 mA.

So, the induced current in the wire is 7.85 milliamps.

To know more about induced current, visit,

https://brainly.com/question/27605406

#SPJ4

Other Questions
Which two bonds are least similar in polarity?Select one:a. I-Br and SiClb. B-F and Cl-Fc. C-Cl and Ge-Cld. O-F and Cl-Fe. Ga-Cl and I-Br Experiencing acute stress on a frequent basis, such as with back-to-back tight deadlines at work, is referred to as what type of stress?A. Toxic stressB. Chronic stress C. Eustress D. Episodic stress you open a new window and pull that up. you put $2,000 into an account with apr of 4%. which compound interval will yield the most money? in 12 years a man will be twice as old as he was 12 years ago . find his present age i need the answers please a btu is defined as the amount of energy required to raise the temperature of one lb of water by one degree celsius group of answer choices true false Cathy was not watching her dog's eating habits and his weight went from 40 pounds to 48pounds. By what percentage did the dog's weight increase? you manage an ecommerce site and are creating new audiences to segment users in ways that are important to your business, like users who've made a purchase.which of these is an example of a predictive audience? Eli and Amy brought in 3 packs of stickers to give out to their two classes. They had enough for Mrs. Os 21 students, Mrs. L's 24 students and even had 15 stickers left over! How many stickers were in each pack?ill give brainliest semester ends tommorow Solve the inequality.$-12 How many francs is the tariff (protecting duty) that is added to a product that ends with a product that is priced 40 francs in paris? Can you please give me the answer you dont have to solve all but please!!!!!! write a paragraph using the words atom, element, compound, and mixture. What is the slope-intercept equation for this line? Which of the following quotations from the passage includes a prepositional phrase?Choose three that apply.OA Instead of complaining (paragraph 1)B.this Saturday (paragraph 3)C. throughout Oakdale School District (paragraph 3)D. We expect to (paragraph 3)OEin great numbers (paragraph 3) make g the subject of 3e+4g=7+9eg You have read two informational texts describing the Great Chicago Fire: What (or Who) Caused the Great Chicago Fire and Great Cities of the United States. Write a short narrative (a few paragraphs) about the Great Chicago Fire from the perspective of a Chicago firefighter. You must include details from both informational texts to support your ideas and add interest to your narrative. In order to recover research and development costs rapidly and earn high initial profits, SenseTV is setting a high price for its plasma TVs. The pricing strategy SenseTV is using is called _____ pricing strategy.A) market-minusB) skimmingC) penetrationD) competitive scarlet is developing a system compliant with the pci dess. waht type of information sithe most likely type she want sto protect The list shows the number of books read by the students in Ms. Alonzos class each week for two months.25, 7, 13, 8, 22, 7, 13, 8Which stem and leaf plot represents the same data?