Answer:
The jet stream speed used by the computer is 142.[tex]\overline {857142}[/tex] km/h
Explanation:
The given parameters are;
The distance between the two cities the plane flies = 4,000 km
The difference in flight times for outgoing and return flights = 70.0 min
We note that 70 min = 70 min × 1 h/60 min = 7/6 h
The airspeed recommended by the airline computer = 1,000 km/h
Let 'a' represent the jet stream speed
The time it takes the plane moving in the same direction as the jet stream between the two cities, 't₁', is given as follows;
[tex]t_1 = \dfrac{4000}{1000 + a}[/tex]
The time it takes the plane moving in the opposite direction as the jet stream between the two cities, 't₂', is given as follows;
[tex]t_2 = \dfrac{4000}{1000 - a}[/tex]
The difference in flight times for outgoing and return flights, Δt = t₂ - t₁
Therefore, we have;
[tex]\Delta t = t_2 - t_1 = \dfrac{4000}{1000 - a} - \dfrac{4000}{1000 + a} = \dfrac{7}{6}[/tex]
From which we get;
[tex]-\dfrac{8000 \cdot a}{a^2 -1,000,000} = \dfrac{7}{6}[/tex]
By cross multiplying, we have;
-48,000·a = 7·a²- 7,000,000
∴ 7·a² + 48,000·a - 7,000,000 = 0
Factorizing with a graphic calculator gives;
(7·a - 1,000)·(a + 7,000) = 0
∴ a = 1,000/7, or a = -7000
Therefore, the jet stream speed the computer is using, a = 1,000/7 km/h = 142.[tex]\overline {857142}[/tex] km/h.
Which part of the drum (Instrument)vibrates when it produces sound?
Answer:
Striking the head of the drum changes its shape and compresses the air inside the shell. the compressed air presses on the bottom head and changes its shape. then these changes are transmitted to the drum shell and reflected back and this action is repeated created a vibration.
Explanation:
Hope this helped Mark BRAINLEST!!!
How would the model change as the atom forms bonds? The third shell would have eight electrons after the atom gains seven electrons to fill the outermost shell. The third shell would be empty so that the eight electrons in the second level would be outermost after the atom loses one electron. The first and third shells would be empty so that the atom would have eight electrons in its remaining shell after the atom loses three electrons. The first shell would have two electrons and the second shell would have six electrons after the atom loses three electrons.
Answer:
The third shell would be empty, so the eight electrons on the second level would be the outermost after the atom lost one electron
Explanation:
When an atom is bonded with other atoms, a more stable configuration must be reached, which is why the energy of the molecule is less than the energy of the individual atoms, for this to happen in general, electrons are shared or lost and gained in each atom, depending on the electronegative of the same.
If we analyze an atom within the molecule, its last shell is full, in the case of atoms with few electrons in this shell, they are lost and in the case of many electors in this shell, it gains electrons to have eight (8) in total.
When reviewing the different answers, the correct one is:
* The third shell would be empty, so the eight electrons on the second level would be the outermost after the atom lost one electron
Answer: It’s B
Explanation:
a car is traveling 20 m/s. it takes 4 seconds with a 7,500 n force to come to a stop. what is the mass of the car
Answer:
mass equals 375 kg
Explanation:
f=ma
f=7500
a=20
m=f/a
m=7500/20
m=375
1500 kg is the mass of the car.
What is Newton's second law of motion?Newton's second law of motion describes the relationship between an object's mass and the amount of force needed to accelerate it.
Newton's second law is often stated as,
F=ma, which means the force (F) acting on an object is equal to the mass (m) of an object times its acceleration (a).
According to the question,
Mass = 20m/s , Time = 4s , Force = 7500 N
a = Δv/Δt
a = 20m/s / 4s
a = 5 m/s²
If F = ma then,
7500 N = m x 5 m/s²
m = [tex]\frac{7500 N }{ 5m/s^{2} }[/tex]
m = 1500 kg
Therefore,
1500 kg is the mass of the car.
Learn more about Newton's second law of motion here:
https://brainly.com/question/13447525
#SPJ2
Which form of electromagnetic radiation with a relatively high amount of energy is used to sanitize lab goggles?
Answer:
sorry
Explanation:
i don't know this but when i find the answer i will type here
Gamma rays of electromagnetic radiation with a relatively high amount of energy is used to sanitize lab goggles.
What are gamma rays?A gamma ray, also known as gamma radiation, is a penetrating form of electromagnetic radiation arising from the radioactive decay of atomic nuclei. It consists of the shortest wavelength electromagnetic waves, typically shorter than those of X-rays.
Moreover, gamma rays are the most harmful external hazard. Beta particles can partially penetrate skin, causing “beta burns”. Alpha particles cannot penetrate intact skin. Gamma and x-rays can pass through a person damaging cells in their path.
Therefore, both x-rays and gamma rays are forms of high-frequency (high-energy) ionizing radiation, which means they have enough energy to remove an electron from (ionize) an atom or molecule. Ionizing radiation can damage the DNA (genes) inside a cell. Sometimes this can lead to cancer later on.
Learn more about gamma rays:
https://brainly.com/question/12528914
#SPJ2
The radio is playing at the front of the room. How does the sound get from the speakers to your ears? A: A breeze blows from the speakers and pushes the sound along. B: Vibrations are sent through the air to your ears. C: The sound bounces off a satellite and back to Earth. D: The speakers produce invisible laser beams that carry sound.
Answer:
Vibrations are sent through the air to your ears.
Explanation:
Sound is a form of energy that is transmitted in compression and rare factions. Sound is a mechanical wave. All mechanical waves require a material medium for propagation.
The material medium for the propagation of sound is air. When the sound is produced by the speakers, the molecules of air are set into vibration and this vibration carries the sound from the speaker to your ears.
how could you use Newton's Second Law to study forces?
Answer:
F = ma or force is equal to mass times acceleration.
Explanation:
You are designing a spaceship, and you want it to have an artificial gravity of 9.8 m/s2 at the center of mass of an average human. The average human has a center of gravity that is about 90 cm above their feet. Through other engineering constraints, you have determined the rotational speed of the ship to be 0.2 rad/s. What should the radius of the ship be (in m)? (Round your answer to the nearest whole number!)
Answer:
The tangential acceleration is 0 m/s².
Explanation:
Answer:
The tangential acceleration is 0 m/s².
Explanation:
How much force is needed to move a 0.1 kg snowball at a rate of 15 m/s² upward?
Answer:
The needed force is "1.5 Newtons". A further solution is provided below.
Explanation:
The given values are:
mass,
= 0.1 kg
acceleration,
= 15 m/s²
As we know,
⇒ [tex]Force= mass\times acceleration[/tex]
On substituting the given values, we get
⇒ [tex]=0.1\times 15[/tex]
⇒ [tex]=1.5 \ Newtons[/tex]
IS THIS CORRECT???...........................
Answer:
A. consumers
B. multi-cellular
Explanation:
Only plants have chlorophyll and only plants have a cell wall so C and D are out of the window. They are consumers because, they don't have photosynthesis so they have to eat. They are multi-cellular because, animals all have at least a brain, body, etc. Which all need millions of cells.
A pitcher throws an overhand fastball from an approximate height of 2.65 m and at an angle of 2.5° below horizontal. The catcher catches the ball high in the strike zone, at a height of 1.02 m above the ground. If the pitcher's mound and home plate are 18.5 m apart, what is the initial velocity of the pitch?
Answer:
The initial velocity of the pitch is approximately 36.5 m/s
Explanation:
The given parameters of the thrown fastball are;
The height at which the pitcher throws the fastball, h₁ = 2.65 m
The angle direction in which the ball is thrown, θ = 2.5° below the horizontal
The height above the ground the catcher catches the ball, h₂ = 1.02 m
The distance between the pitcher's mound and the home plate = 18.5 m
Let 'u' represent the initial velocity of the pitch
From h = [tex]u_y[/tex]·t + 1/2·g·t², we have;
[tex]u_y[/tex] = The vertical velocity = u·sin(θ) = u·sin(2.5°)
h = 2.65 m - 1.02 m = 1.63 m
uₓ·t = u·cos(θ) = u·cos(2.5°) × t = 18.5 m
∴ t = 18.5 m/(u·cos(2.5°))
∴ h = [tex]u_y[/tex]·t + 1/2·g·t² = (u·sin(2.5°))×(18.5/(u·cos(2.5°))) + 1/2·g·t²
1.63 = 8.5·tan(2.5°) + 1/2 × 9.8 × t²
t² = (1.63 - 8.5·tan(2.5°))/(1/2 × 9.8) = 0.25691469087
t = √(0.25691469087) ≈ 0.50686752763
t ≈ 0.50686752763 seconds
u = 18.5 m/(t·cos(2.5°)) = 18.5 m/(0.50686752763 s × cos(2.5°)) = 36.5334603 m/s ≈ 36.5 m/s
The initial velocity of the pitch = u ≈ 36.5 m/s.
PLS ANSWER FAST WILL GIVE BRAINLY!!!!
Why does the look of an atom keep changing?
Answer:Atomic model keep changing because the electrons around the nucleus are not fixed and they keeps rotating or changing their position in valence orbits around the nucleus.
Explanation:
What is the density of an object that has a mass of 54g and a volume of 9 mL
Answer:
idc
Explanation:
idc
what is evaporation
:D
Answer:
its when a liquid, prolly water, turns into a vapor !!
Explanation:
and nice pic uwu
A liquid turning into a gas is evaporation. It is how water gets from the surface of the Earth to the atmosphere.
Latent heat is a form of energy held in the evaporated water when it evaporates and cools.
Evaporation plays a significant role in the energy exchange that results in atmospheric motion, affecting weather and climate in the Earth-atmosphere system.
The particles with the highest kinetic energy are the first to evaporate from a liquid.
Most of the air's moisture evaporates from rivers, lakes, seas, and oceans. Water at the surface of the Earth evaporates into water vapor, which rises into the sky and forms clouds, which eventually release water back onto Earth as precipitation.
PLEASE HELP!! 25 POINTS!! WILL MARK BRAINLIEST!!
The focus of a parabola is (−6,−3) . The directrix of the parabola is y=4. What is the equation of the parabola?
The focus of a parabola is (0,−4). The directrix of the parabola is the line y=−5. What is the equation of the parabola?
The directrix of a parabola is the line y=7. The focus of the parabola is (2,3). What is the equation of the parabola?
The directrix of a parabola is y=−6. The focus of the parabola is (−2,−4) . What is the equation of the parabola?
The standard equations of the parabolas are listed below:
y + 6 = - (1/14) · (x + 6)² y = (1/2) · (x + 4.5)² y - 5 = - (1/8) · (x - 2)² y + 5 = (1/4) · (x + 2)²How to determine the standard equation of the parabolaIn this question we have four case of parabolas with vertical axes of reference, whose standard formula is:
[tex]y - k = \frac{1}{4\cdot p}\cdot (x-h)^{2}[/tex] (1)
Where:
(h, k) - The vertex of the parabola.p - Least distance between the vertex and the focus of the parabola.Please notice that p < 0 when the directrix is above the focus, otherwise p < 0. The vertex is the midpoint of line segment between the directrix and the focus.
Now we proceed to derive the standard equations of the parabola:
1) Vertex:
(h, k) = 0.5 · (- 6, 4) + 0.5 · (- 6, - 3)
(h, k) = (- 6, 0.5)
Least distance:
p = - 3.5
y + 6 = - (1/14) · (x + 6)²
2) Vertex:
(h, k) = 0.5 · (0, - 4) + 0.5 · (0, - 5)
(h, k) = (0, - 4.5)
Least distance:
p = 0.5
y = (1/2) · (x + 4.5)²
3) Vertex:
(h, k) = 0.5 · (2, 3) + 0.5 · (2, 7)
(h, k) = (2, 5)
Least distance:
p = 2
y - 5 = - (1/8) · (x - 2)²
4) Vertex:
(h, k) = 0.5 · (- 2, - 6) + 0.5 · (- 2, - 4)
(h, k) = (- 2, - 5)
Least distance:
p = 1
y + 5 = (1/4) · (x + 2)²
To learn more on parabolas: https://brainly.com/question/4074088
#SPJ1
Why is it important for body cell to have twice and many chromosomes as sex cells?
Answer:
Why sex cells only need half the number of chromosomes compared to other cells in the body? As gametes are produced, the number of chromosomes must be reduced by half. Why? The zygote must contain genetic information from the mother and from the father, so the gametes must contain half of the chromosomes found in normal body cells.
Explanation:
Brainliest Plzz
Answer:
During Mitosis, the chromosomes split at G2 Phase.
Determine the increase in volume of 100m3 of mercury when it's temperature change from 10c to 45c the linear expansion coefficient is 6 x 10-5
Answer:
0.63m
Explanation:
Volume expansivity = change in volume/original volume×temp change
Volume expansivity p = 3x
p = ∆V/V∆t
x is the linear expansivity
Given
x = 6 x 10^-4
p = 3x
p = 3(6 x 10^-5)
p = 18×10^-5
Volume = 100m³
∆t = 45-10 = 35°C
Required
Change in volume ∆V
Substitute the given values into the formula
18×10^-5 = ∆V/100(35)
18×10^-5 =∆V/3500
∆V = 3500×0.00018
∆V = 0.63m
Hence the increase in volume of the Mercury is 0.63n
What changes into energy in the sun?
Answer:
The sun generates energy from a process called nuclear fusion. During nuclear fusion, the high pressure and temperature in the sun's core cause nuclei to separate from their electrons. Hydrogen nuclei fuse to form one helium atom. During the fusion process, radiant energy is released. :D
Some medicines lose their potency when exposed to ultraviolet light. Recommend the type of container in which these medicines should be stored
Answer:
Most likely in a blacked-out air sealed container!
Hope I helped! Plz mark me brainiest I need it!
define principle of lever
Answer:
pull to activate something
Explanation:
How is solar energy used by plants?
Answer:
https://asknature.org/strategy/photosynthesis-converts-solar-energy-into-chemical-energy/#:~:text=Photosynthesis%20in%20plants%20converts%20solar,electrons%20and%20protons%20from%20water.&text=In%20the%20energy%2Dtransduction%20reactions,transporting%20molecules%2C%20ATP%20and%20NADPH.
Explanation:
Photosynthesis in plants converts solar energy into chemical energy using electrons and protons from water. ... In the energy-transduction reactions, solar energy is converted into chemical energy in the form of two energy-transporting molecules, ATP and NADPH.
Answer:
Our planetary system is named the "solar" system because our Sun is named Sol, ... The spacecraft used up their power supplies decades ago.
Explanation:
Please kind sir/lady help me with my home work UvU
yes
Explanation:
the endorsment is successful because Jordan shoe is a imported brand
Name two organelles that contain their own genetic meterial and ribosome
Answer:
Mitochondria and plastids are the two organelles that contain their own genetic material. Both these organelles have their own DNA and ribosomes.
An impulse of 12.2kg m/s is delivered to an object whose initial momentum is 4.5kgm/s. What is the object's final momentum?
Answer:
Object's final momentum = 16.7 kg-m/s
Explanation:
Given that,
Impulse, J = 12.2 kg-m/s
Initial momentum, [tex]P_i=4.5\ kg-m/s[/tex]
We need to find the object's final momentum. We know that the impulse is equal to the change in momentum. So,
Impulse = change in momentum
[tex]J=P_f-P_i\\\\P_f=J+P_i\\\\P_f=12.2+4.5\\\\P_f=16.7\ kg-m/s[/tex]
So, the object's final momentum is 16.7 kg-m/s.
Given:
Impulse, [tex]J = 12.2 kg-m/s[/tex]Initial momentum, [tex]P_i = 4.5 \ kg-m/s[/tex]We know the relation,
→ [tex]Impulse = Change \ in \ momentum[/tex]
or,
→ [tex]J = P_f-P_i[/tex]
then,
→ [tex]P_f = J+P_i[/tex]
By substituting the values,
[tex]= 12.2+4.5[/tex]
[tex]= 16.7 \ kg-m/s[/tex]
Thus the above answer is right.
Learn more about momentum here:
https://brainly.com/question/18551770
* why does one prefesumbrella
even in summer.
Answer:
black umbrella provides a better shade
Explanation:
This is because a black umbrella provides a better shade than a white umbrella . Absorption of more light energy from the sun by the black umbrella does not matter because our body is not in touch with the umbrella .
Help, please!!!!!
I just need help putting the vocab word in the box where it belongs.
here's the first part but for the 2nd one all I know is that the word "compression" goes on the spirals that are closer together.
hope this helps!
How do you find mass in physics
What is the net force on a refrigerator that you push with an applied force of 125 N to the right and the (sliding) friction between the floor and the fridge is 95 N to the left? (b) As you increase the force applied to the fridge, will the friction force also increase? Explain. Hint: remember the force of friction between solid surfaces does not depend on speed
Answer:
hola
Explanation:
jffkbjkcvncncjcncjcjchchchcjcjcjcjcjckgmndjekbm hdfstfm mvndbfncn bdhwhgmvmch
What is 1.2 x 10^5 in standard form?
The standard form of the given exponential function is 120000.
By putting the number as a base and the number of repetitions as a little number to its upper right, a representation of repeated multiplications of the same number is known as an exponential form.
It is simpler to write repeated multiplication using base and exponents in the exponential form.
The equation f(x) = aˣ, in which the input variable x appears as an exponent and a as the base, describes an exponential function.
So, the given exponential function is,
1.2 x 10⁵
Here, 10 is the base and 5 is the exponent.
10⁵ = 100000
Therefore, the standard form of the given equation is,
1.2 x 100000 = 120000
To learn more about exponential function, click:
https://brainly.com/question/29166310
#SPJ6
What is elastic potential energy and give and a example
Answer:
Many objects are designed specifically to store elastic potential energy, for example: The coil spring of a wind-up clock. An archer's stretched bow. A bent diving board, just before a divers jump
Explanation:
Answer:
Elastic Potential Energy is stored in elastic items.
A example of Elastic Potential Energy is a rubber band. When you stretch it, and it shoots off your finger. Where the rubber band gives off Elastic Potential Energy, is when you stretch it on your fingers, before you let it go.
Q2.
The information plate on a hairdrier is shown.
230 V
VSO Ha
800 W
(a) What is the power rating of the hairdrier?
Answer:
800W
Explanation:
Given the following data;
Voltage = 230 V
Model = VSO Ha
Power = 800 W
Power is calculated by the multiplication of voltage and current flowing through an electric circuit.
Mathematically, power is given by the formula;
Power = current * voltage
The S.I unit for power is Watts and it is a measure of the energy consumption of an electronic device.
