Answer:
like about $500 and because of the ca!erlsn
Gsggagsgsvhdgdvdvdvdvdg help me fast I’ll give you brainliste
The answer is D
Hope that was fast enough
rewrite 1/6 and 2/11 so they have a common denominator then use <, =, or > to order
Answer:
1/6 < 2/11
Step-by-step explanation:
1/6 = 2/12
2/11 >2/12
So that means 1/6 < 2/11
Answer: 1/6 < 2/11
This is the same as saying 11/66 < 12/66
===========================================================
Explanation:
1/6 is the same as 11/66 when multiplying top and bottom by 11.
2/11 is the same as 12/66 when multiplying top and bottom by 6.
The 6 and 11 multipliers are from the original denominators (just swapped).
We can see that 11/66 is smaller than 12/66, simply because 11 < 12, so that means 1/6 is smaller than 2/11
-----------------
Here's one way you could list out the steps
11 < 12
11/66 < 12/66
1/6 < 2/11
------------------
Here's another way to list out the steps. First assume that 1/6 and 2/11 are equal. Cross multiplication then leads to
1/6 = 2/11
1*11 = 6*2
11 = 12
Which is false. But we can fix this by replacing every equal sign with a less than sign
1/6 < 2/11
1*11 < 6*2
11 < 12
---------------------
Yet another way to see which is smaller is to use your calculator or long division to find the decimal form of each value
1/6 = 0.1667 approximately
2/11 = 0.1818 approximately
We see that 0.1667 is smaller than 0.1818, which must mean 1/6 is smaller than 2/11.
Describe the motion of a particle with position (x, y) as t varies in the given interval. (For each answer, enter an ordered pair of the form x, y.) x = 1 + sin(t), y = 3 + 2 cos(t), π/2 ≤ t ≤ 2π
Answer:
The motion of the particle describes an ellipse.
Step-by-step explanation:
The characteristics of the motion of the particle is derived by eliminating [tex]t[/tex] in the parametric expressions. Since both expressions are based on trigonometric functions, we proceed to use the following trigonometric identity:
[tex]\cos^{2} t + \sin^{2} t = 1[/tex] (1)
Where:
[tex]\cos t = \frac{y-3}{2}[/tex] (2)
[tex]\sin t = x - 1[/tex] (3)
By (2) and (3) in (1):
[tex]\left(\frac{y-3}{2} \right)^{2} + (x-1)^{2} = 1[/tex]
[tex]\frac{(x-1)^{2}}{1}+\frac{(y-3)^{2}}{4} = 1[/tex] (4)
The motion of the particle describes an ellipse.
Please help solve this problem.
Answer:
Ang hirap naman niyan bakit kaya lahat na module mahirap
7 is added to the product of 5 and 6
Answer:
37
Step-by-step explanation:
7 + (5×6)
= 7 + 30
= 37
.................
Answer:
37
Step-by-step explanation:
First Step: Multiply
5x6=30
Second Step: Add
30+7=37
Therefore your answer is 37
Hope this helps and if it does, don't be afraid to give my answer a "Thanks" and maybe a Brainliest if it's correct?
The Blacktop Speedway is a supplier of automotive parts. Included in stock are 7 speedometers that are correctly calibrated and two that are not. Three speedometers are randomly selected without replacement. Let the random variable z represent the number that are not correctly calibrated.
Complete the probability distribution table. (Report probabilities accurate to 4 decimal places.)
x P(x)
0
1
2
3
Answer:
x P(x)
0 0.4167
1 0.5
2 0.0833
3 0
Step-by-step explanation:
The speedometers are chosen without replacement, which means that the hypergeometric distribution is used to solve this question.
Hypergeometric distribution:
The probability of x successes is given by the following formula:
[tex]P(X = x) = h(x,N,n,k) = \frac{C_{k,x}*C_{N-k,n-x}}{C_{N,n}}[/tex]
In which:
x is the number of successes.
N is the size of the population.
n is the size of the sample.
k is the total number of desired outcomes.
In this question:
7 + 2 = 9 speedometers, which means that [tex]N = 9[/tex]
2 are not correctly calibrated, which means that [tex]k = 2[/tex]
3 are chosen, which means that [tex]n = 3[/tex]
Complete the probability distribution table.
Probability of each outcome.
So
[tex]P(X = x) = h(x,N,n,k) = \frac{C_{k,x}*C_{N-k,n-x}}{C_{N,n}}[/tex]
[tex]P(X = 0) = h(0,9,3,2) = \frac{C_{2,0}*C_{7,3}}{C_{9,3}} = 0.4167[/tex]
[tex]P(X = 1) = h(1,9,3,2) = \frac{C_{2,1}*C_{7,2}}{C_{9,3}} = 0.5[/tex]
[tex]P(X = 2) = h(2,9,3,2) = \frac{C_{2,2}*C_{7,1}}{C_{9,3}} = 0.0833[/tex]
Only 2 defective, so [tex]P(X = 3) = 0[/tex]
Probability distribution table:
x P(x)
0 0.4167
1 0.5
2 0.0833
3 0
amy shoots a 100 arrows at a target each arrow hits with a probability 0.01 what is the probability that one of her first 5 arrows hit the target
Answer:
0.5759
Step-by-step explanation:
find the slope of a line perpendicular to the line below. y=2x+4
You are watching an airplane fly in the distance.The airplane is traveling at altitude of 8 kilometers How far is the airplane from your location?
9. Mariah has 28 centimeters of reed
and 10 meters of reed for weaving
baskets. How many meters of reed
does she have? Write your answer as a
decimal and explain your answer.
Divide the following quantities in the following ratios £100 1:3
what is the range of the funcion y=x^2
Answer:
Range = [0, infinity)
Step-by-step explanation:
Minimum point of the graph is at (0,0) and it is a u shaped graph. Hence, range is 0 inclusive to infinity
Slope intercept
6times+5y=15
Answer:
y= (-6/5)x+3
Step-by-step explanation:
6x+5y=15
Divide everything by 5
(6/5)x + y = 3
Move (6/5)x to the other side of the = sign by subtracting
y= (-6/5)x + 3
That's your answer!
Hope it helps!
If F is the function defined by F(x)=3x−1, find the solution set for F(x)=0.
The solution for set F(x) is -1
Use the P (A + B) = P (A) x P (B) rule to find the probability of system failure. Let A and B be the events that the first alarm and second alarm, respectively, fail. Do you get the same answer you did in the earlier question?
Answer:
answer is in the pic Mark me brainliest plz
Step-by-step explanation:
Answer:
The probability of the first alarm failing is (1 - 0.8) = 0.2
The probability of the second alarm failing is (1−0.9)=0.1.
Using the multiplication rule (since A and B are independent), the probability of failure is 0.2 * 0.1 = 0.02
Step-by-step explanation:
In a right triangle, the lengths of the two legs are 8 cm and 10 cm respectively. Find the hypotenuse of the triangle.
9 cm
10.5 cm
12 cm
12.8 cm
12.8, pythagorean theorem.
25 x 2
help me
plz understand me by opening
Answer:
[tex]25 \times 2 = 50 \\ you \: are \: idiot \: [/tex]
really?! :|
A group of 40 bowlers showed that their average score was 192. Assume the population standard deviation is 8. Find the 95% confidence interval of the mean score of all bowlers.
Answer:
[tex]CI=189.5,194.5[/tex]
Step-by-step explanation:
From the question we are told that:
Sample size [tex]n=40[/tex]
Mean [tex]\=x =192[/tex]
Standard deviation[tex]\sigma=8[/tex]
Significance Level [tex]\alpha=0.05[/tex]
From table
Critical Value of [tex]Z=1.96[/tex]
Generally the equation for momentum is mathematically given by
[tex]CI =\=x \pm z_(a/2) \frac{\sigma}{\sqrt{n}}[/tex]
[tex]CI =192 \pm 1.96 \frac{8}{\sqrt{40}}[/tex]
[tex]CI=192 \pm 2.479[/tex]
[tex]CI=189.5,194.5[/tex]
In a survey, 24 people were asked how much they spent on their child's last birthday gift. The results were roughly bell-shaped with a mean of $42 and standard deviation of $2. Construct a confidence interval at a 98% confidence level.
Answer:
The 98% confidence interval for the mean amount spent on their child's last birthday gift is between $40.98 and $43.02.
Step-by-step explanation:
We have the standard deviation for the sample, which means that the t-distribution is used to solve this question.
The first step to solve this problem is finding how many degrees of freedom, we have. This is the sample size subtracted by 1. So
df = 24 - 1 = 23
98% confidence interval
Now, we have to find a value of T, which is found looking at the t table, with 23 degrees of freedom(y-axis) and a confidence level of [tex]1 - \frac{1 - 0.98}{2} = 0.99[/tex]. So we have T = 2.5
The margin of error is:
[tex]M = T\frac{s}{\sqrt{n}} = 2.5\frac{2}{\sqrt{24}} = 1.02[/tex]
In which s is the standard deviation of the sample and n is the size of the sample.
The lower end of the interval is the sample mean subtracted by M. So it is 42 - 1.02 = $40.98.
The upper end of the interval is the sample mean added to M. So it is 42 + 1.02 = $43.02.
The 98% confidence interval for the mean amount spent on their child's last birthday gift is between $40.98 and $43.02.
What is the simplified value of the exponential expression 27 1/3 ?
O1/3
O1/9
O3
O9
Answer:
the correct answer is 3
hope it helps
have a nice day
Water lilies are often used to decorate ponds, as shown in the photo. But they are also famous for their unusual growth pattern!
Answer:
what is the question
pls mark me as brainlist
Thank you for the points
h=255-21t-16t^2
PLEASE HELP!!
Answer:
3.15 seconds is the answer.
Explanation
when the ball touches the ground, h =0
hence,
0=255-21t-16t²
16t²+21t-225=0
here a=16 ,b=21, c= -225
[tex]t= \frac{ - b± \sqrt{ {b }^{2} - 4ac} }{2a} \\ \\ t= \frac{ - 21± \sqrt{ {21}^{2} - 4 \times 16 \times - 225} }{2 \times 16} \\ = \frac{ - 21 ± \sqrt{441 - ( - 14400)} }{32} \\ = \frac{ - 21± \sqrt{14841} }{32} \\ = \frac{ - 21±121.82}{32} \\ \\ t = \frac{ - 21 + 121.82}{32} \: or \: \: t = \frac{ - 21 - 121.82}{32} \\ t = 3.15 \: \: or \: \: t = - 4.46[/tex]
time cannot be negative, hence t = -4.46 can be avoided
The ball takes 3.15 seconds to hit the ground.
Two lamps marked 100 W - 110 V and 100 W - 220 V are connected i
series across a 220 V line. What power is consumed in each lamp?
The power consumed in the lamp marked 100W - 110V is 15.68W
The power consumed in the lamp marked 100W - 220V is 62.73W
Step-by-step explanation:
Given:
First lamp rating
Power (P) = 100W
Voltage (V) = 110V
Second lamp rating
Power (P) = 100W
Voltage (V) = 220V
Source
Voltage = 220V
i. Get the resistance of each lamp.
Remember that power (P) of each of the lamps is given by the quotient of the square of their voltage ratings (V) and their resistances (R). i.e
P = [tex]\frac{V^2}{R}[/tex]
Make R subject of the formula
⇒ R = [tex]\frac{V^2}{P}[/tex] ------------------(i)
For first lamp, let the resistance be R₁. Now substitute R = R₁, V = 110V and P = 100W into equation (i)
R₁ = [tex]\frac{110^2}{100}[/tex]
R₁ = 121Ω
For second lamp, let the resistance be R₂. Now substitute R = R₂, V = 220V and P = 100W into equation (i)
R₂ = [tex]\frac{220^2}{100}[/tex]
R₂ = 484Ω
ii. Get the equivalent resistance of the resistances of the lamps.
Since the lamps are connected in series, their equivalent resistance (R) is the sum of their individual resistances. i.e
R = R₁ + R₂
R = 121 + 484
R = 605Ω
iii. Get the current flowing through each of the lamps.
Since the lamps are connected in series, then the same current flows through them. This current (I) is produced by the source voltage (V = 220V) of the line and their equivalent resistance (R = 605Ω). i.e
V = IR [From Ohm's law]
I = [tex]\frac{V}{R}[/tex]
I = [tex]\frac{220}{605}[/tex]
I = 0.36A
iv. Get the power consumed by each lamp.
From Ohm's law, the power consumed is given by;
P = I²R
Where;
I = current flowing through the lamp
R = resistance of the lamp.
For the first lamp, power consumed is given by;
P = I²R [Where I = 0.36 and R = 121Ω]
P = (0.36)² x 121
P = 15.68W
For the second lamp, power consumed is given by;
P = I²R [Where I = 0.36 and R = 484Ω]
P = (0.36)² x 484
P = 62.73W
Therefore;
The power consumed in the lamp marked 100W - 110V is 15.68W
The power consumed in the lamp marked 100W - 220V is 62.73W
A man had 35 goats.he sold 10 of
them.how many did he remains with.
Answer:
He remained with 25 goats.
Step-by-step explanation:
35 - 10 = 25
Hope this helps.
Answer:
He remained with 25 goats
Step-by-step explanation:
35 - 10 = 25
Find the mean of the following data set.
8, 5, 15, 12, 10
A. 12.5
B. 10
C. 14
D. 50
Answer:
10
Step-by-step explanation:
the sum of 8,5,15,12,10 is 50 and there are 5 numbers so 50 divided by 5 is 10 and it's mean is also 10
hope this helps !
The weight gain of beef steers were measured over a 140 day test period. the average daily gains (lb/day) of 10 steers on the same diet were as follows. The tenth steer had a weight gain of 4.02 lb/day.
3.89 3.51 3.97 3.31 3.21 3.36 3.67 3.24 3.27
determine the mean and median.
Answer:
[tex]\bar x = 3.545[/tex]
[tex]Median = 3.435[/tex]
Step-by-step explanation:
Given
[tex]x:3.89, 3.51, 3.97, 3.31, 3.21, 3.36, 3.67, 3.24, 3.27[/tex]
[tex]10th: 4.02[/tex]
Solving (a): The mean
This is calculated as:
[tex]\bar x = \frac{\sum x}{n}[/tex]
So, we have:
[tex]\bar x = \frac{3.89 +3.51 +3.97 +3.31 +3.21 +3.36 +3.67 +3.24 +3.27+4.02}{10}[/tex]
[tex]\bar x = \frac{35.45}{10}[/tex]
[tex]\bar x = 3.545[/tex]
Solving (b): The median
First, we sort the data; as follows:
[tex]3.21, 3.24, 3.27, 3.31, 3.36, 3.51, 3.67, 3.89, 3.97, 4.02[/tex]
[tex]n = 10[/tex]
So, the median position is:
[tex]Median = \frac{n + 1}{2}th[/tex]
[tex]Median = \frac{10 + 1}{2}th[/tex]
[tex]Median = \frac{11}{2}th[/tex]
[tex]Median = 5.5th[/tex]
This means that the median is the average of the 5th and 6th item
[tex]Median = \frac{3.36 + 3.51}{2}[/tex]
[tex]Median = \frac{6.87}{2}[/tex]
[tex]Median = 3.435[/tex]
Juan and Lizette rented a car for one week to drive from Phoenix to Boise. The car rental rate was $250 per week and $0.20 per mile. By the most direct route, the drive is 926 miles. How much did they spend on the rental car?
( solution at pic)
There is a high-speed rail track between London and Manchester.
The length of this track is 210 miles.
A train departs London at 11:20 and arrives in Manchester at 13:28
The train company claims
the average speed of this train is 104 miles per hour.
Is the average speed of this train 104 miles per hour?
(4)
Use the box below to show clearly how you get your answer.
Answer:
Step-by-step explanation:
this is the famous dirt formula, :P I made it up :D
D=rt ( notice it looks like Dirt , kinda, but it also means it dirt simple )
D= distance
r = rate ( think speed or how fast)
t = time ( in what ever units of time you want to use, seconds, minutes, hours )
13:28 - 11:20 = 128 minutes ( b/c the question is asking in MPH convert to hours) 2.4666667 hours
210 miles = r * 2.46666667
210 / 2.46666667 = r ( in MPH) ( does anyone else find it odd that they are saying miles in London instead of kilometers? :/ )
85.135 MPH = rate
so no, not even close to 104 MPH :/
Answer:
Average speed is 98 mph
Step-by-step explanation:
[tex]\frac{distance (miles)}{time (hours)}[/tex] = speed [tex]\frac{mile}{hours}[/tex] (miles per hour is a ratio)
The time is 2 hours and 8 minutes.
[tex]\frac{8}{60}[/tex] = .13333 ( 8 minutes / 60 minutes in a hour)
So time is 2.133333 hours .
Divide the distance 210 by the time 2.13333 and get the speed.
Its 98.437..
Round to 98 miles per hour.
According to Okun's law, if the unemployment rate goes from 5% to 3%, what will be the effect on the GDP?
A. It will increase by 7%.
B. It will decrease by 7%.
C. It will decrease by 1%.
D. It will increase by 1%.
Answer:
D. It will increase by 1%.
Step-by-step explanation:
Given
[tex]u_1 = 5\%[/tex] --- initial rate
[tex]u_2 = 3\%[/tex] --- final rate
Required
The effect on the GDP
To calculate this, we make use of:
[tex]\frac{\triangle Y}{Y} = u_1 - 2\triangle u[/tex]
This gives:
[tex]\frac{\triangle Y}{Y} = 5\% - 2(5\% - 3\%)[/tex]
[tex]\frac{\triangle Y}{Y} = 5\% - 2(2\%)[/tex]
[tex]\frac{\triangle Y}{Y} = 5\% - 4\%[/tex]
[tex]\frac{\triangle Y}{Y} = 1\%[/tex]
This implies that the GDP will increase by 1%
Answer: A. It will increase by 7%.
Step-by-step explanation: I took this course!
Two mechanics worked on a car. The first mechanic worked for 10 hours, and the second mechanic worked for 5 hours. Together they charged a total of $1125. What was the rate charged per hour by each mechanic if the sum of the two rates was $140 per hour?
Answer:
The first mechanic charged $ 85 an hour, and the second mechanic charged $ 55 an hour.
Step-by-step explanation:
Given that two mechanics worked on a car, and the first mechanic worked for 10 hours, and the second mechanic worked for 5 hours, and together they charged a total of $ 1125, to determine what was the rate charged per hour by each mechanic if the sum of the two rates was $ 140 per hour, the following calculation must be performed:
1125/15 = X
75 = X
80 x 10 + 60 x 5 = 800 + 300 = 1100
85 x 10 + 55 x 5 = 850 + 275 = 1125
Therefore, the first mechanic charged $ 85 an hour, and the second mechanic charged $ 55 an hour.
