Methanoic acid is the simplest carboxylic acid molecule. It has one carbon atom. Draw the structural model for methanoic acid (using C and H).

Answer: 3.4 × 10 -1 equal 33.5 cs. May I have brainiest? pls. (the -1 is to the power of the ten.

gasoline is the chemical that is coming out of the air

Answer:

3-hexanol

1 -butanol

2-pentanol

Explanation:

Let us recall that chromic acid or chromate are strong oxidizing agents. When they are oxidized, their colour changes from orange to green.

This shows a reduction in chromic acid or chromate. The reaction of chromic acid or chromate with a primary alcohol yields a carboxylic acid while reaction with a secondary substrate yields an alkanal.

Note that Tertiary alkyl halides are not be oxidized hence reactions involving a point where invitation carried along occur.

3-ethyl-3-pentanol is a tertiary alkyl halide hence it can not be oxidized.

Answer:

C. Products have higher potential energy, and the reaction is endothermic.

it's 0.2cm different from the expected value, wich was 14.6cm

how many percent that are is calculated in the screenshot.

rounded it's 1.37%

Answer:

There are four containers: a 100-mL beaker, 250-mL Erlenmeyer flask, a 500-mL beaker, and a 1-L Florence flask. They contain coffee, tea, water, and milk, although not in that order. Use the following facts to identify the beverage in each container.

a. the 500-mL container has a beverage commonly associated with breakfast.

b. the largest container has a colorless liquid (i.e. neither yellow nor orange).

c. the beverage in the smallest container is opaque. (you cannot see through it).

d. One clear liquid is in a container half the volume of a colored liquid.

e. The only combustible liquid has exactly twice the volume of an opaque liquid.

Explanation:

a. The 500-mL container has a beverage commonly associated with breakfast is coffee.

b. The largest container has a colorless liquid (i.e. neither yellow nor orange) water.

c. The beverage in the smallest container is opaque. (you cannot see through it) milk.

d. One clear liquid is in a container half the volume of a colored liquid tea.

The 500-mL container has a beverage commonly associated with breakfast is coffee. (rest answers are as follows)

The Indentification of the beverages can be done by knowing the content and optical activity that uniquely identify the container.

Learn more about optical activity here ;

https://brainly.com/question/15892094

#SPJ5

Refer to the attachment.

Hope this helps you...

Answer:

Nitrate NO3

here's your answer, hope it helps you

Answer:

Theory

Explanation:

We are given the statement;

"A helium filled balloon floats."

Now, this statement is an attempt to explain to us why balloons float. And the reason is because they are filled with helium. This is no prediction or law or observation because to find out if the balloons contain helium, there must have been experiments to confirm that.

Thus, the statement in the question is a theory.

Answer:

this answer is for first one

Explanation:

A higher evalations, where the atmospheric pressure is much lower, the boiling point increase with increased pressure up to the critical point where the gas and liquid properties become identical

Answer:

answer = 22.5m

Explanation:

using

[tex]s = \frac{ {v}^{2} - {4}^{2} }{2a} [/tex]

s= (0²-21²)/2(-9.8)

s= -441/19.6

s= 22.5m

do consider marking as Brainliest if this helped!!

Answer:

0.043 M

Explanation:

The reaction that takes place is:

First we calculate how many HCl moles reacted, using the given concentration and volume required to reach the equivalence point:

As 1 mol of H⁺ reacts with 1 mol of OH⁻, in the 25.0 mL of the Ca(OH)₂ sample there are 1.0817 mmoles of OH⁻.

With that in mind we can calculate the hydroxide ion concentration in the original sample solution, using the calculated number of moles and given volume:

The titration is termed the neutralization reaction with the acid and base. The concentration of hydroxide in the titration is 0.0865 M.

The neutralization reaction is given as the reaction in which the acid and base react to form the salt and water, stabilizing the pH of the solution.

The neutralization of acid and base to identify the strength can be given as:

[tex]\rm M_V_1=M_2V_2[/tex]

Substituting the strength and the volume of calcium hydroxide and the HCl with the volume:

[tex]\rm 0.029\;M\;\times\;37.3\;mL=M_2\;\times\;25\;mL\\M_2=\dfrac{ 0.029\;M\;\times\;37.3\;mL}{25\;mL} \\M_2=0.0432\;M[/tex]

The strength of the calcium hydroxide in the reaction is 0.04326 M.

One molar unit of calcium hydroxide results in 2 molar units of hydroxide. The molar unit of hydroxide in 0.04326 M calcium hydroxide is:

[tex]\rm 1\;M\;Ca(OH)_2=2\;M\;OH^-\\\\0.04326\;M\;Ca(OH)_2=0.04326\;\times\;2\;M\;OH^-\\0.04326\;M\;Ca(OH)_2=0.0865\;M\;OH^-[/tex]

The concentration of hydroxide ion in the titration is 0.0865 M.

Learn more about  molarity, here:

https://brainly.com/question/12127540

Answer:

d. the conjugate base of the weak acid

Explanation:

The strong base (BOH) is completely dissociated in water:

BOH → B⁺ + OH⁻

The resulting conjugate acid (OH⁻) is a weak acid, so it remains in solution as OH⁻ ions.

By other hand, the weak acid (HA) is only slightly dissociated in water:

HA ⇄ H⁺ + A⁻

The resulting conjugate base (A⁻) is a weak base. Thus, it reacts with H⁺ ions from water to form HA, increasing the concentration of OH⁻ ions in the solution.

Therefore, the resulting solution will have a pH > 7 (basic).

Answer:

d

Explanation:

Answer:

0.2762M Na+ in the solution

Explanation:

2.07g of sodium iodide Is Dissolved In 50.ML Of A 0.30M...

To solve this question we need to find the moles of sodium iodide, NaI, that are the same than the moles of sodium cation, Na+. The volume in liters of the solution is 0.050L. The molarity is:

Moles NaI = Moles Na+ -Molar mass NaI: 149.89g/mol-

2.07g NaI * (1mol / 149.89g) = 0.01381 moles NaI = Moles Na+

Molarity:

0.01381 moles Na+ / 0.0500L =

0.2762M Na+ in the solution

Answer:

because atoms is just a chemical ahahahah

Explanation:

hope it helps ☺️

Dalton's hypothesis of atomic theory was given by John Dalton. The atoms of one element are the same as another and are not part of Dalton. Thus, option E is correct.

Dalton gave the atomic theory where atoms are the fundamental unit of the element of the periodic table. More than one element and atoms combine to form molecules and compounds.

The property of the atoms to get rearranged is the basis of the chemical reaction that results in the formation of the new product. This resulted in the formulation of chemical combinations. The atoms of the given element are said to be the same like the potassium contains the same atom.

The atoms of one element cannot be the same as another atom, like the atom of sodium and chloride are not the same. They are different in physical and chemical properties.

These atoms follow the law of conservation of mass. The atoms are composed of sub-atomic particles that have been constituted of neutrons, electrons, and protons.

Therefore, in option E. the atoms of two elements can never be the same.

Learn more about Dalton's theory, here:

https://brainly.com/question/15507302

#SPJ2

Answer:

2 Cu + O2 → 2 CuO

This is an oxidation-reduction (redox) reaction:

2 Cu0 - 4 e- → 2 CuII

(oxidation)

2 O0 + 4 e- → 2 O-II

(reduction)

Cu is a reducing agent, O2 is an oxidizing agent.

Answer:

The pressure of O2 will increase. Shift to the right.

The pressure of O3 will increase . Dhift to the left

Explanation:

The perturbations are:

The temperature is lowered. The pressure of O2 will

The temperature is raised. The pressure of O3 will:

We can Apply LeCh's principle and see the heat, ΔH, as a product of the reaction:

NO(g) + O3(g) → NO2(g) + O2(g) + ΔH

If temperature is lowered, the system will shift to the right in order to produce more heat doing:

The pressure of O2 will increase

In the other way, if temperature is raised, the system will shift to the left in order to decrease the amount of heat produced.

The pressure of O3 will increase

Answer:

"1.4 mL" is the appropriate solution.

Explanation:

According to the question,

Now,

Increase in volume will be:

⇒ [tex]\Delta V = \alpha\times v_0\times \Delta \epsilon[/tex]

By putting the given values, we get

           [tex]=1.12\times 10^{-4}\times 500\times 25[/tex]

           [tex]=1.12\times 10^{-4}\times 12500[/tex]

           [tex]=1.4 \ mL[/tex]

Explanation:

mass=kilogram (kg)

temperature=kelvin

power=watt

hope it helps

Answer:

c. CH3CH2CH(CH3)CHO

Explanation:

Hello there!

In this case, according to the process for the one-step oxidation of a primary alcohol with a moderately strong oxidizing agent like pyridinium chlorochromate (PCC), whereby an aldehyde is produced, we infer that the corresponding product will be 2-methylbutanal, which matches with the choice c. CH3CH2CH(CH3)CHO according to the following reaction:

[tex]CH_3CH_2CH(CH_3)CH_2OH\rightarrow CH_3CH_2CH(CH_3)COH[/tex]

Regards!

Answer:

There are 1.195 calories in 5 J.

Explanation:

The relation between calorie and Joules is as follow :

4.184 J = 1 calorie

or

1 J = (1/4.184) calorie

Let the taken number is 5 J

So,

5 J = (5/4.184) calorie

5 J = 1.195 calorie

So, there are 1.195 calories in 5 J.

Answer:

less than 5 centimeters because it is a nonvascular plant

Explanation:

Mosses are a group of plants under the division Bryophyta. They are said to be the most primitive plant life in existence as they lack true roots, stems and leaves. They also lack vascular system, hence, they are regarded as non-vascular plants. They usually grow in very small sizes (about 0.2 - 10cm).

According to this question, Penny bought a club moss plant for her water garden and needs to know how tall the plant will grow so she know how much space it will need. Since it is a miss plant that lacks vascular tissues i.e. nonvascular, it will likely grow less than 5 centimeters in height.

Answer:

d

Explanation:

Answer:

264 g/mol

Explanation:

#electrons equal #protons = 106

Plus 1 charge => m protons = 106 + 1 = 107

Mass number: 107 + 157 = 264 g/mol

Answer:

because the have stronger electrostatic force

Answer:

The general preparation of esters( for example ethyl ethanoate) is through a process known as ESTERIFICATION.

Explanation:

The formation of an ester by the reaction between an alkanol and an acid is known as esterification. This reaction is extremely slow and reversible at room temperature, and is catalyzed by a high concentration of hydrogen ions.

In the preparation of one of the simpler esters known as ETHYL ETHANOATE the reactants include ethanol(an alcohol) and glacial ethanoic acid(a carboxylic acid) in the presence of concentrated tetraoxosulphate VI acid as a CATALYST. Note that, a catalyst is any substance that is able to increase the rate of a chemical reaction.

The mixture is warmed in a water bath( hot but not boiling) for about 25 minutes. The mixture is poured into a beaker partially filled with a sodium or calcium chloride to remove interacted ethanol. The ethyl ETHANOATE floats on the mixture as oily globules.

Answer:

The choice that is not an indicator of a chemical change is "State of matter changes". More common than not, chemical reactions produce energy in the form of light or heat. Along with energy, they also produce a new substance called the product that could be in any state of matter (solid, gas, or liquid).

Explanation:

Answer:

Mass CO2 = 3.75 grams

Mass H2O = 2.30 grams

Mass SO2 = 2.73 grams

Explanation:

Step 1: Data given

Density of Liquid ethyl mercaptan, C2H6S = 0.84 g/mL

Volume of ethyl mercaptan = 3.15 mL

Step 2: The reaction

2C2H6S + 9O2 → 4CO2 + 6H2O + 2SO2

Step 3: Calculate mass of ethyl mercaptan

Mass = Volume * density

Mass ethyl mercaptan = 3.15 mL * 0.84 g/mL

Mass ethyl mercaptan = 2.646 grams

Step 4: Calculate moles ethyl mercaptan

Moles = mass / molar mass

Moles ethyl mercaptan = 2.646 grams / 62.13 g/mol

Moles ethyl mercaptan = 0.04259 moles

Step 5: Calculate moles of other products

For 2 moles ethyl mercaptan we need 9 moles O2 to produce 4 moles CO2, 6 moles H2O and 2 moles SO2

For 0.04259 moles we need 0.1917 moles O2 to produce:

2*0.04259 = 0.08518 moles CO2

3*0.04259 = 0.1278 moles H2O

1*0.04259 = 0.04259 moles SO2

Step 6: Calculate mass produced

Mass = moles * molar mass

Mass CO2 = 0.08518 moles * 44.01 g/mol

Mass CO2 = 3.75 grams

Mass H2O = 0.1278 moles * 18.02 g/mol

Mass H2O = 2.30 grams

Mass SO2 = 0.04259 moles * 64.07 g/mol

Mass SO2 = 2.73 grams

The forces in gases are weaker than forces in solids and liquids.

Because they have more kinetic energy that overcomes the force of attraction.