Answer:
D. Zinc.
Explanation:
Galvanization is a metal-coating process which involves the application of a thin layer of zinc to an iron or steel, so as to prevent rusting or corrosion.
The zinc metal protects the iron from rusting by sealing the surface of the iron and thus, preventing weathering and oxidation.
Hence, if Mike wants to galvanize iron to protect it from rusting. The metal he should use is zinc (Zn) because a coating of zinc would protect the iron (Fe) by corroding first when exposed to moisture or the atmosphere.
Answer:
b
Explanation:
why there are two chloride ions for every calcium ion
Answer:
The valency of calcium is +2
Explanation:
Calcium is in group two. The members of group two are divalent metals that loose two electrons to form M^2+.
Since they form M^2+, they form ionic bonds with two uninegative ions. Chlorine is in group 17. This implies that its valency is -1 and it accepts one electron when it participates in an ionic bond.
Hence it will take two chlorine atoms to receive two electrons from one calcium atom in an ionic bond making the ratio of calcium to chlorine in the compound 2:1.
The pH of a solution decreases by 2.0. How does the hydronium ion concentration of the solution change? Increases to 2 times the original concentration increases to 100 times the original concentration decreases to one one hundredth. Of the original concentration decreases to one half. Of the original concentration
Answer:
The hydronium ion concentration increases to 100 times the original concentration
Explanation:
The pH of a solution is defined as the negative logarithm of the hydrogen or hydronium ion concentration of that solution. It is given by the expression below:
pH = -log[H₃O⁺] = log[H₃O⁺]⁻¹
Assuming the solution was at neutral with original pH = 7;
The new pH of the solution will be = 7 - 2 = 5
At pH = 7;
log[H₃O⁺]⁻¹ = 7
[H₃O⁺]⁻¹ = 10⁷
[H₃O⁺] = 10⁻⁷
At pH = 5
log[H₃O⁺]⁻¹ = 5
[H₃O⁺]⁻¹ = 10⁵
[H₃O⁺] = 10⁻⁵
10⁻⁵ = 10⁻⁷ * 10²
But 10² = 100
Therefore, the hydronium ion concentration increases to 100 times the original concentration
Answer:
B
Explanation:
On Edge
If two solutions with concentrations of 0.4 M sugar and 0.7 M sugar respectively are separated by a semipermeable membrane, during osmosis there is a net flow of Group of answer choices sugar molecules from the dilute to the concentrated solution sugar molecules from the concentrated to the dilute solution water molecules from the concentrated to the dilute solution water molecules from the dilute to the concentrated solution
Answer: Water molecules from the dilute to the concentrated solution
Explanation:
During Osmosis if a solution is separerated by a semipermeable membrane, the solvent (typically water) from the less concentrated solution in terms of solute goes through the semipermeable membrane to the solution with the higher concentration so that the concentrations between the solutions can be balanced.
With the above solutions therefore, water molecules would move from the solution of 0.4M of sugar to the solution with a 0.7M of sugar through the semipermeable membrane.
During osmosis, water molecules move from the dilute to the concentrated solution.
OSMOSIS:
Osmosis is the movement of water molecules from a region of higher concentration (low concentration of solute) to a region of lower concentration (higher concentration of solute). The principle of movement is based on the concentration gradient i.e. difference in concentration across a semipermeable membrane. According to this question, two solutions have sugar concentrations of 0.4 M sugar and 0.7 M respectively and are separated by a semipermeable membrane. Therefore, water molecules will move from the dilute (0.4M) to the concentrated (0.7M) solution during osmosis.Learn more at: https://brainly.com/question/13655668?referrer=searchResults
5) O etanol C2H6O, combustível produzido em grande escala no Brasil, pode ser obtido pela fermentação da sacarose C12H22O11 encontrada na cana-de-açúcar. Esse processo consiste na degradação por enzimas de micro-organismos da sacarose. Um técnico de laboratório preparou uma solução aquosa misturando 33 g de sacarose em 200 mL de água. Ao final, a solução ficou com um volume de 220 mL. Qual a concentração em g/l desta solução sabendo que a formula é C=Mg /VL a) 0,15 b) 0,165 c) 66 d) 15 e) 150
Answer:
a) 0.15
Explanation:
A concentração de sacarose é 0,15 g / l no etanol. O Brasil está produzindo etanol em grandes quantidades que é usado como combustível em veículos e indústrias. Este etanol é produzido a partir da cultura da cana-de-açúcar e o Brasil é o segundo maior produtor mundial com cerca de 34,45 bilhões de litros em 2019. Os Estados Unidos da América e o Brasil produzem cerca de 84% do etanol mundial.
calculate the weight of 3.491 into 10 to the power 19 molecules of cl2
Answer:
The mass of 3.491 × 10¹⁹ molecules of Cl₂ of Cl₂ is 4.11 × 10⁻³ grams
Explanation:
The number of particles in one mole of a substance id=s given by the Avogadro's number which is approximately 6.023 × 10²³ particles
Therefore, we have;
One mole of Cl₂ gas, which is a compound, contains 6.023 × 10²³ individual molecules of Cl₂
3.491 × 10¹⁹ molecules of Cl₂ is equivalent to (3.491 × 10¹⁹)/(6.023 × 10²³) = 5.796 × 10⁻⁵ moles of Cl₂
The mass of one mole of Cl₂ = 70.906 g/mol
The mass of 5.796 × 10⁻⁵ moles of Cl₂ = 70.906 × 5.796 × 10^(-5) = 4.11 × 10⁻³ grams
Therefore;
The mass of 3.491 × 10¹⁹ molecules of Cl₂ of Cl₂ = 4.11 × 10⁻³ grams.
Over the period of a few days, a hospital receives an overwhelming increase in the number of patients with food poisoning. How would a scientist respond to this increase in sick patients?
Answer:
Hey there!
A scientist would try to determine the cause of the food poisoning, and see if the people who got poisoned had anything in common, for example: they ate at the same restaurant, they are all people of a certain age, etc.
Let me know if this helps :)
When two ionic compounds are dissolved in water, a double replacement reaction can... Group of answer choices occur if two of the ions form an insoluble ionic compound, which precipitates out of solution occur if the ions react to form a gas, which bubbles out of the solution never occur since all ions are in water occur if the ions react to form a gas, which bubbles out of the solution ionic compounds only react with nonmetals
Answer:
occur if two of the ions form an insoluble ionic compound, which precipitates out of solution
Explanation:
When two ionic compounds are dissolved in water, a double replacement reaction takes place if two of the ions form an insoluble ionic compound, which precipitates out of solution. In double displacement reaction ions switch partners. And hence, produce an insoluble precipitate.
What is the main factor responsible for the acidic and basic character of oxides?
Explain your answer.
Explanation:
We define non-metal oxide acidity in terms of the acidic solutions formed in reactions with water. For example, sulfur trioxide reacts with water to forms sulfuric acid. In sum, acidic oxides are oxides of non-metals, and basic oxides are oxides of metals. ... CrO is basic, Cr2O3 is amphoteric and CrO3 is acidic.Reply me in commentsExamine the given reaction. NH4NO3(s) → NH4+(aq) + NO3–(aq) ΔH° = 25.45 kJ/mol ΔS° = 108.7 J/mol·K Which of the given is correct about the ΔG° at 25 °C?
A)+4,360 J
B)−6,942 J
C)−4,360 J
D)+6,942 J
Answer:
B)−6,942 J /mol
Explanation:
At constant temperature and pressure, you cand define the change in Gibbs free energy, ΔG, as:
ΔG = ΔH - TΔS
Where ΔH is enthalpy, T absolute temperature and ΔS change in entropy.
Replacing (25°C = 273 + 25 = 298K; 25.45kJ/mol = 25450J/mol):
ΔG = ΔH - TΔS
ΔG = 25450J/mol - 298K×108.7J/molK
ΔG = -6942.6J/mol
Right solution is:
B)−6,942 J /molSarah is in her chemistry lab doing an experiment. When she goes to take the mass of the chemical she is working with, she discovers that the balance is gone! Sarah knows the density of her chemical is 10 g/mL, and the volume is 5 mL. What is the mass of her chemical?
Answer:
Mass of chemical = 50 gram
Explanation:
Given:
Volume of chemical = 5 ml
Density of chemical = 10 g/mL
Find:
Mass of chemical
Computation:
Mass of chemical = Density of chemical × Volume of chemical
Mass of chemical = 10 × 5
Mass of chemical = 50 gram
How much energy has your body used, in joules, if your health
device indicates that 450 Calories were burned during your workout? How many
Calories are in a dinner containing 3.5 x 100 joules
Answer:
1,882.8 joules83.652 caloriesExplanation:
Given:
Amount in calories = 450 calories
Amount in joules = 3.5 × 100 joules
Find:
Change in joulesChange in caloriesComputation:
We know that,
1 calories = 4.184 joules
So,
Amount in calories = 450 calories
= 450 × 4.184
= 1,882.8 joules
Amount in joules = 3.5 × 100 joules
= [3.5 × 100] / 4.184
= 83.652 calories
compare the activity of sodium and iron with water and dilute acid
Answer:
Reactions of sodium with water and dilute acid
Sodium reacts explosively with dilute HCl(aq) to produce NaCl(aq) and H₂(g)
2Na (s) + 2HCl(aq) → 2NaCl(aq) + H₂(g)
Sodium reacts violently with cold water to produce NaOH(aq) and H₂(g)
2Na (s) + H₂O(l) → 2Na(OH)(aq) + H₂(g)
The produced hydrogen may become ignited and explode
Reactions of iron with water and dilute acid
Iron reacts very slowly with dilute acid to produce iron (II) chloride and hydrogen gas
Fe (s) + 2 HCl (aq) → FeCl₂ (aq) + H₂ (g)
Iron does not react with cold water. Iron reacts only with steam
Explanation:
What is the outcome of all chemical changes when two substances are combined?
Answer:
This is called a chemical reaction. gas may form.heat may be produced and the color may change
3. What amount of
space is taken up by a rock that weighs 150 milligrams, and
has a density of 30 mg/ml? (Express your answer in Liters)
Hey there!:
Density = 30 mg/mL
Mass = 150 mg
Volume = ??
Therefore:
D = m / V
30 = 150 / V
V = 150 / 30
V = 5.0 mL
converts volume into liters :
5.0 mL / 1000 => 0.005 L or 5.0 x 10⁻³ L
Hope this helps!
Balance the reaction which forms ions. Choose "blank" if no coefficient other than 1 is needed. ZnBr2 what Zn + + what Br-
1 or 2 or black
Answer: [tex]ZnBr_2\rightarrow Zn^{2+}+2Br^-[/tex]
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
Here zinc is having an oxidation state of +2 called as [tex]Zn^{2+}[/tex] cation and bromide is an anion with oxidation state of -1. Thus 2 atoms of [tex]Br^-[/tex] will combine with one [tex]Zn^{2+}[/tex] and written in simplest whole number ratios to give neutral [tex]ZnBr_2[/tex]
[tex]ZnBr_2\rightarrow Zn^{2+}+2Br^-[/tex]
CO2(g) + H2(g)
cog) + H2O(1)
What is being oxidized?
carbon
O carbon dioxide
oxygen
hydrogen
Answer:
Hydrogen
Explanation:
This may be wrong but I can't really tell because of how you have written the question
Answer: The answer is D. Hydrogen
Explanation:
I took the test
Consider the hypothetical chemical reaction represented by the equation 3 A + 2 B → A 3B 2 Which of the following is a correct interpretation of this equation? i. 3 grams of A react with 2 grams of B to form 1 gram of A 3B 2 ii. 3 atoms of A react with 2 atoms of B to form 1 molecule of A 3B 2 iii. 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2
Answer:
iii. 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2
Explanation:
A + 2 B → A 3B 2
A chemical equation among other things, gives the stoichiometry of the reaction; that is the relationship between reactants and products.
This relationship is basically stated in moles form the coefficients of the reactants and product.
From the reaction above, we can say;
1 mol of A reacts with 2 mol of B to form 1 mol of A3B2
It cannot be grams because the reactants and products all have different molar masses.
The correct interpretation of the equation of the hypothetical chemical reaction is; Choice (iii) 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2.
Definition:
Chemical equations are equations that make use of chemical formulae and symbols to represent chemical reactions. The left-hand side of a chemical equation represents the reactants and the right-hand side represents the products.
Each reacting entity is also assigned its corresponding stoichiometric coefficient.
However, this stoichiometric coefficient is to quantify the no. of moles of the reactants consumed or products formed as the case may be.
Read more:
https://brainly.com/question/12271256
In the laboratory, a volume of 100 mL of sulfuric acid (H2SO4) is recorded. How many g are there of the liquid if its density is 1.83 g / cm3?
Answer:
[tex]\large \boxed{\text{183 g}}[/tex]
Explanation:
[tex]\begin{array}{rcl}\text{Density} & = & \dfrac{\text{Mass}}{\text{Volume}}\\\\\rho & = &\dfrac{m}{V}\\\\1.83 \text{ g$\cdot$ cm}^{-3} & = & \dfrac{m}{\text{100 cm}^{3}}\\\\m & = & \text{183 g}\\\end{array}\\\text{There are $\large \boxed{\textbf{183 g}}$ of sulfuric acid.}[/tex]
WILL GIVE A BRAINLIEST FOR THE ANSWER.
Pls open the picture for the question. I need the answer ASAP.
Answer:
(i) There is a very fast rate at t1, as its slope is the most significant, at t2 the rate is still positive, but it has decreased compared to t1, and at t3 the rate is almost constant, as seen by the nearly flat slope.
(ii) The trend in the reaction rate is logarithmic, with a very fast reaction rate at the beginning that slowly decreases.
Explanation:
Please help, this assignment is to hard for me. :(
Answer:
603000 J
Explanation:
The following data were obtained from the question:
Energy required (Q) =...?
Mass (M) = 10000 g
Specific heat capacity (C) = 2.01 J/g°C
Overheating temperature (T2) = 121°C
Working temperature (T1) = 91°C
Change in temperature (ΔT) =.?
Change in temperature (ΔT) =T2 – T1
Change in temperature (ΔT) = 121 – 91
Change in temperature (ΔT) = 30°C
Finally, we shall determine the energe required to overheat the car as follow:
Q = MCΔT
Q = 10000 × 2.01 × 30
Q = 603000 J
Therefore, 603000 J of energy is required to overheat the car.
can someone send me something to get chemistry going ;);)
Answer:
Check out libretexts chemistry
Explanation:
It's basically an online free textbook for lots of subjects
highly recommended
Ok , whenever you wanna study chemistry , listen to music that you love. So each time you have to study chem , you will be excited bc u also wanna hear that music u love. Similarly , for every boring work you do , reward yourself for it. It helps , Im sure.
Thank you XD
PLZ HELP! TIMED TEST Which of the following groups of elements are likely to have elements in the three states of matter? (1 point)
Alkali metals
Actinides
Halogens
Lanthanides
Answer:
Halogens
Explanation:
Matter is defined as a substance which has mass and occupies volume. The three states of matter are solid, liquid and gas.
Elements which are present in group 17 are known as halogens.
Elements present in this group are fluorine, chlorine, bromine and iodine.
At room temperature, both fluorine and chlorine exists as a gas.
Bromine exists as a liquid and iodine exists as a solid.
Therefore, we can conclude that halogen groups are likely to have elements in three states of matter.
9.7300x10^2
+
9.8700x10^3
[?]x10^[?]
Answer:
1.0843×10^4
Explanation:
If we are to add 9.7300x10^2 + 9.8700x10^3, we must first make the powers of the both to be be the same so that we can carry out any mathematical manipulation of interest. So we can have;
9.7300x10^2 + 98.700x10^2
When we now add the both we have (9.7300 + 98.700)×10^2.
This now gives us the result, 108.43×10^2 which is correctly written as 1.0843×10^4, according to the rules of writing in scientific notation.
Find the density of a cube on Earth that weighs 1.5 kg and has a side-length of 10 cm.
Answer:
1500kg/m^3
Explanation:
Formula:
d=m/v
Given:
m=1.5kg
v=1000cm^3
(The side length of a cube is always equal to the others)
Required:
d=?
Solution:
d=m/v
d=1.5kg/1000cm^3
d=1.5kg/0.001m^3
d=1500kg/m^3
Hope this helps ;) ❤❤❤
Which of these scientist is know for his work in understanding climate change a : edwin hubble b : christian doppler c : warren washington d : charles kuen kao
Answer: just trust me its c
Explanation: i dont cap
When an object falls toward the ground due to gravity, what type of energy becomes kinetic energy?
Answer:
potential energy (gravitational)
Explanation:
Potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height. If we think of the ground as the zero height, the height of the object is coming down from a positive height. Wherever it is relative to the zero height, it is stored at that height, meaning that it is potential energy at that particular height. When it moves to the ground, it becomes kinetic, by gravitational means.
Answer:
Potential
Explanation:
What is the equilibrium constant of aA+bB cC +dD?
Explanation:
{c}^C . {d}^D / {a}^A . {b}^B
What is the term for the belief that one's own culture is superior to other
cultures?
O A. Cultural behavior
O B. Cultural competence
C. Cultural relativism
D. Cultural absolutism
Cultural absolutism is the term for the belief that one's own culture is superior to other cultures.
What is cultural absolutism?Cultural absolutism is one of the perspectives which is common in anthropology, but it can also be applied to non-scientific thoughts also. It assumes that there is a set of universal values which are objectively valid in every situation.
Today, pure cultural absolutism is seen as a harmful effect of ethnocentrism focusing on the belief that one's own culture is superior and the practice of holding other's cultures to the standard of our own. However, purely relativist anthropologists have also been critiqued for going too far, by denying any common humanity and being too lenient towards morally questionable practices. Contemporary approaches try to find a balance between the universal values, such as human dignity, and a more inclusive and relativistic side of culture.
Learn more about cultural absolutism,here:
https://brainly.com/question/12391889
#SPJ2
If you have a little air in a balloon, find the volume of the balloon if the mass is 0.6 g and the density of the air is 0.0012 g / mL
Hey there!:
Mass = 0.6 g
Density = 0.0012 g/mL
Volume = ??
Therefore :
Density = mass / Volume
0.0012 = 0.6 / V
V = 0.6 / 0.012
V = 500 mL
Hope this helps!
3. How many meters above sea level is the base of your landform?
How many meters above sea level is the top of your platform?
Answer:
Base is 715 and top is 850.
Explanation:
715 meters above sea level is the base of my landform and 850 meters above sea level is the top of my platform. Base of landform from a sea level is a starting point of a city or region having same topography. This region has a specific height where it spreads we called it top of the platform. The starting point of my location is 715 meters above sea level spreads up to 850 meters of elevation.
