Mrs. Paul and Dr. Mykannen ride a tandem bike on the beach. They ride along the beach for about 455 meters. Their final velocity is 5.50 m/s. How long did they ride for?

c- temperature

The speed of sound increases with increasing temperature .

Answer:

Explanation:

Force= (q1q2)/(4/\Ęr2)

3×10^6= (1.602×10^-19)^2/(r^2)

r^2=(2.27×10^-33)/(3×10^6)

r^2=8.55×10^-45

r= 9.25×10^-23

multiplication of two vectors yields a vector oroduy

Answer:

Explanation:

We need 2 different equations for this problem: first the velocity of sound equation, then the frequency of the sound equation.

The velocity of sound is found in:

v = 331.5 + .606T

We need to find that first in order to fill it into the frequency equation which is

[tex]f=\frac{v}{\lambda}[/tex] where v is the velocity we will find the part a, f is frequency and lambda is the wavelength. Starting with the velocity of the sound:

v = 331.5 + .606(25) and

v = 331.5 + 15 and rounding correctly using the rules for sig fig when adding:

v = 347 m/s

Filling that into the frequency equation:

[tex]75=\frac{347}{\lambda}[/tex] and

[tex]\lambda=\frac{347}{75}[/tex] so

[tex]\lambda=4.6m[/tex]

Answer:

Nitric acid, also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water.

Explanation:

Good morning...

Nitric acid production is mainly driven by fertilizer industry. Nitric acid is used in the production of ammonium nitrate and calcium ammonium nitrate which find applications as fertilizers.

Answer:

B= 4 A=5

Explanation:

Answer:

.04 kg m/s

Explanation:

Momentum is simply mass multiplied by velocity given by p = mv. You can consider momentum as mass in motion.

Before the collision, the data given for the toy train:

v = 0.5m/s

m = 75g

We need to convert grams into the SI unit of mass, kg.

75g / 1000g * 1kg = 0.075kg

Using p = mv, we can determine:

p = 0.075kg * 0.5m/s = 0.0375 kg m/s

Rounding to the value of 1 sig-fig, it comes out to be 0.04 kg m/s.

Answer:

I think C

Explanation:

If im right give brainliest :)

Answer:

C

Explanation:

The correct answer should be the micrometer.

The micrometer is an instrument that is capable of measuring the component of an object to very high precision. It is used to obtain accurate measurements in engineering.

In the case of the copper wire, the diameter of 0.3 mm was an approximation and a more accurate measure of the diameter would be obtained by using the micrometer.

The correct option is C.

Explanation:

An oven thermostat regulates the temperature inside an oven. The thermostat's temperature-sensitive probe measures the oven's warmth, switching the heat on and off as necessary to maintain the correct temperature.

Answer:

funny bone and compact bone

Explanation:

your funny bone only reacts if you hit it against something the compact bone is the heaviest and strongest bone in your body and the bone marrow is soft sponge like tissue in the center if most bones that produces white and red blood cells

Answer:

A temporary orbit in which a spacecraft awaits the next phase of its mission .

Answer:

it is maybe A but i'm not 100% sure

Explanation:

its the only one that is mixed

Answer:

B

A

Explanation:

please mark as brainliest :)

Answer:

Explanation:

vf=0

vi = 17

a = -0.8

Δx = ?

vf^2 = vi^2 + 2 a Δx

Δx = (vf^2 - vi^2) / 2a

Δx = (0-17^2) / 2 (-0.8)

Δx = 180.625 m

For 1000 seconds , a current of 0.1 A flows so as to transfer charge of 100C

The average velocity is 25 mph north.

Average velocity = displacement/time

Displacement =

(400 mi north) + (275 mi south)

Displacement = 125 mi north

Average V = (125 mi north) / 5 hours.

Average V = 25 mph north

Answer:

D. Frequency

Explanation:

The energy of an  electromagnetic wave is proportional to frequency, mathematically it is expressed as;

E ∝ f

E = hf

where;

h is Planck's constant = 6.626 x 10⁻³⁴ Js

The equation above can also be expanded to;

[tex]E = hf = h \frac{c}{\lambda}[/tex]

where;

c is speed of light = 3 x 10⁸ m/s

λ is the wavelength of the electromagnetic wave

Since the speed of light is constant, we can conclude that the energy of the electromagnetic wave is directly proportional to its frequency and inversely proportional to its wavelength.

Therefore, the correct option for direct proportionality is FREQUENCY

Answer:

Equal to the frictional force

Explanation:

Question; The options given with regards to a similar question posted online are;

A. Equal (equivalent) to the frictional force

B. Larger than the frictional force

C. Equal to the object's weight

D. More than the object's weight

Explanation

According to Newton's first law of motion, every object shall remain at rest or continue moving with uniform (constant speed) motion unless there is a net force acting on the object

Given that the velocity of the massive block, lying on the surface that has friction, being pulled by the rope = Constant

Therefore;

The net force acting on the moving block while being pulled by the rope = 0

From which we have;

The pulling force = The resistive force

Where;

The pulling force = The (pulling) force (applied) on the rope

The resistive force = The frictional force of the surface which tends to prevent the motion of the block

Therefore, given that the net force acting on the block = 0

The force on the rope = The frictional force (of the surface)

The correct option is option A. Equal to the frictional force.

Answer:

i. 2.5 kHz ii. 5 kHz

Explanation:

The frequency of the wave in the rod is given by f = nv/2L where n = harmonic, v = speed of sound in rod = 5000 m/s and L = length of rod = 1 m

i. f1

For f1, n = 1

f1 = 1 × v/2L

= v/2L

Substituting the values of the variables into the equation, we have

= 5000 m/s ÷ (2 × 1 m)

= 5000 m/s ÷ 2 m

= 2500 /s

= 2500 Hz

= 2.5 kHz

ii. f2

For f2, n = 2

f2 = 2 × v/2L

= v/L

Substituting the values of the variables into the equation, we have

= 5000 m/s ÷ 1 m  

= 5000 /s

= 5000 Hz

= 5 kHz

Answer: The energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].

Explanation:

Given: Mass = 250 kg

Initial temperature = [tex]16^{o}C[/tex]

Final temperature = [tex]38^{o}C[/tex]

Specific heat capacity = 4200 [tex]J/kg^{o}C[/tex]

Formula used to calculate the energy is as follows.

[tex]q = m \times C \times (T_{2} - T_{1})[/tex]

where,

q = heat energy

m = mass of substance

C = specific heat capacity

[tex]T_{1}[/tex] = initial temperature

[tex]T_{2}[/tex] = final temperature

Substitute the values into above formula as follows.

[tex]q = 250 kg \times 4200 J/kg^{o}C \times (38 - 16)^{o}C\\= 250 kg \times 4200 J/kg^{o}C \times 22^{o}C[/tex]

As it is given that water absorbs 25% of the energy incident on the solar panel. Hence, energy incident on the solar panel can be calculated as follows.

[tex]\frac{25}{100} \times q = 250 kg \times 4200 J/kg^{o}C \times 22^{o}C\\q = 9.24 \times 10^{7} J[/tex]

Thus, we can conclude that the energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].

Complete question:

(b) How much energy must be supplied to boil 2kg of water? providing that the specific latent heat of vaporization of water is 330 kJ/kg. The initial temperature of the water is 20 ⁰C

Answer:

The energy that must be supplied to boil the given mass of the water is 672,000 J

Explanation:

Given;

mass of water, m = 2 kg

heat of vaporization of water, L =  330 kJ/kg

initial temperature of water, t = 20 ⁰C

specific heat capacity of water, c = 4200 J/kg⁰C

Assuming no mass of the water is lost through vaporization, the energy needed to boil the given water is calculated as;

Q = mc(100 - 20)

Q = 2 x 4200 x (80)  

Q = 672,000 J

Q = 672,000 J

Q = 672,000 J

Therefore, the energy that must be supplied to boil the given mass of the water is 672,000 J

Answer:

SO

Explanation:

SI

Answer:

Explanation:

dynamic equilibrium

Answer:

5m/sec^2

Explanation:

Distance=1200m

Time=4 min

1=60sec

4=4 x 60

=240sec

Velocity=Distance/Time

Velocity=1200/240

Velocity=5m/sec^2

Mark me as brainliest

Answer:

the power output P = 1484 W

Explanation:

Power P  = Force× speed

Given that motor of a battery-powered scooter can maintain a speed of 5.3 m/s by providing a force of 280 N.

Therefore,the power output of the motor P = 280×5.3 = 1484 W

Hence, the power output P = 1484 W

Answer:

It is connected in series with the circuit

Explanation:

This is because to measure the current in the circuit, the current in the circuit has to flow through the ammeter. As such, the ammeter must be connected in series with the circuit so as to measure the current flowing through the circuit.

So, to measure the current flowing through a circuit with an ammeter, the ammeter must be connected in series with the circuit.

Answer:

44.1 m

Explanation:

Consider the displacement being x:

x = (g•t²)/2

x = (9.8•3²)/2

x = (9.8•9)/2

x = 88.2/2

x = 44.1 m

Answer:

Explanation:

that's the correct answer