Answer: 1.224 moles of [tex]Na_3N[/tex] were used.
Explanation:
We are given:
Volume of nitrogen gas produced = 13.7 L
At STP conditions:
22.4 L of volume is occupied by 1 mole of a gas
Applying unitary method:
13.7 L of nitrogen gas will be occupied by = [tex]\frac{1mol}{22.4L}\times 13.7L=0.612mol[/tex]
For the given chemical reaction:
[tex]2Na_3N\rightarrow 6Na+N_2[/tex]
By Stoichiometry of the reaction:
1 mole of nitrogen gas is produced by 2 mole of [tex]Na_3N[/tex]
So, 0.612 moles of nitrogen gas will be produced from = [tex]\frac{2}{1}\times 0.612=1.224mol[/tex] of [tex]Na_3N[/tex]
Hence, 1.224 moles of [tex]Na_3N[/tex] were used.
A scientist wants to know: "If salt is added to water, would the
solution still boil at the same temperature?"
torcses
Answer:
no, the sollution will boil at a higher temperature because the density of the sollution will increase when salt is added to it
which energy is found in the nucleus of an atom?
Answer:
Nuclear energy.
Explanation:
It's the energy that holds protons and neutrons ( nucleons ) together, hence holds the nucleus as one.
hii pls help me to balance the equation and state the symbols thanksss
Answer:
I hope that the link above will be helpful
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
[tex]\boxed{\pmb{\green{\sf{2Mg +H_{2}SO_{4}\dashrightarrow H _{2}+Mg_{2}SO_{4}}}}}[/tex]
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
I forgot to add the answers i had to my question (While a balloon is being filled, if the temperature of the air in the balloon increases, what happens to it’s volume)
A) It stays the same
B) It deflates
C) It decreases
D) It increases
The correct answer is D ... and if the answer was added to the word "explode" .. it would have been more correct .
what do y’all do when y’all brainly says “locked” and won’t show anymore answers !???
Answer:
Create a new account as the thing you're experiencing now is due to the fact that Brainly had blocked your account.
what is second explain it briefly
Explanation:
it is that when an object is moving 25 m per sec to calculate its time we can simply divide 1.5 by 25 and multiply by 1
what is the reactant(s) in the chemical equation below
3CO(g) + Fe2O3(s) 2Fe(s) + 3CO2(g)
Answer:
the reactants are carbon dioxide ,iron, oxygen
2(3a-3)-2(a-2)=3
thank you
Answer:
6a - 6 - 2a + 4 = 3
4a - 2 = 3
4a = 3 + 2
4a = 5
a = 5/4
hope that helps ✌
(Q014) Silicates a. are classified on the basis of what kind of metals they contain. b. form through the evaporation of water. c. are a large category of minerals that includes the common minerals calcite and dolomite. d. have the silicon-oxygen tetrahedron as their structural unit.
Answer: d. have the silicon-oxygen tetrahedron as their structural unit.
Explanation:
Silicates are anions that have both Oxygen and Silicon as the basis of their structure. These two form a tetrahedron type structure that enable them to be useful for a whole lot of things.
Silicates are very abundant on Earth as they comprise around 95% of the Earth's crust as well as the upper mantle which explains why they are mostly found in igneous rocks.
can you solve question 5 and 6 only
Answer:
oil floats on water because it is heavier than water
Salt is no longer visible after stirring as salt dissolves in water
by filtration
Which of the following is NOT a physical property?
Viscosity
Reactivity
Malleability
Density
Answer:
reactivity is NOT a physical property
I need help on this question asap!
You are in a lab and you use 11.50 g of Na(s) to react with Cl(g). Below is the reaction that happens from this.
Na + Cl2 → NaCl
Your percent yield is 95%. From this info what is the actual yield?
Answer:
27.79 g to the nearest hundredth.
Explanation:
2Na + Cl2 ---> 2NaCl
Using the molar masses , the theoretical yield is:
46 g of Na yields 46 + 35.5*2 g NaCl
46 g ---> 117 g NaCl so
11.5 g ----> 117 * 11.5 / 46 g NaCl
But, as the yield is 90%
the actual yield is 0.95 * 117 * 11.5 / 46
= 27.79 g.
water and development are substitute of one another.
explanation with it, please
during the electrolysis of cryolite ,aluminium and fluorine are formed in.......molar ratio
[tex]{\huge{\boxed{\sf{\pink{☛Answer࿐}}}}}[/tex]
From the first mechanism, it can be seen that the Aluminum is reduced at cathode and Florine is oxidized at anode.The ratio of aluminium and fluorine is the ratio of their change in oxidation number, i.e. 2:3༒HOPE SO IT HELPS YOU༒
༒MARK ME AS BRAINLIEST༒
describe the different system of measurement
Answer:
A system of measurement is a collection of units of measurement and rules relating them to each other. ... Systems of measurement in use include the International System of Units (SI), the modern form of the metric system, the British imperial system, and the United States customary system.
Explanation:
Hope it works!!!!
Answer:
Systems of measurement in use include the International System of Units (SI), the modern form of the metric system, the British imperial system, and the United States customary system.
What is the AHsol for LiF → Lit + F-? The lattice energy is -1,036 kJ/
mol, the enthalpy of hydration for Lit is -499
kJ/mol, and the enthalpy of hydration for F-is-431 kJ/mol. Use A Hooi = -A Hat + AHhydr.
0-968 kJ/mol
-106 kJ/mol
106 kJ/mol
1,966 kJ/
mol
The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
Given that;
Heat of hydration = ΔH solution – ΔH lattice energy
Where,
ΔH solution = Heat of the solution
ΔH lattice energy = Lattice energy of the solution
The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent
From the formula above;
ΔH solution = Heat of hydration + ΔH lattice energy
Heat of hydration = [(-431) + (-499)] = -930 kJ/mol
ΔH solution = (-930) + (-1,036) = -1966 kJ/mol
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
https://brainly.com/question/13526282
giúp tớ với, mình học lớp 9 ạ
Answer: broooo what is this
Explanation:
PLZ HELP ME Which of the following accurately descnbes the function of the nervous system? O
A To help parts of the body communicate
B. To prevent and fight disease C:
To allow the body to move O
D. To provide support for the body SUNT
Answer:
A
Explanation:
the nervous system helps parts of the body communicate.through nerves.
I hope this helps
3g of clean mg ribbon and 8g of clean copper metal was burnt separately in equal volume of air and both mass reacted completely with air state and explain where they was greater change in mass??
Answer:
gshshs
Explanation:
bshsjskskehhshs
The copper metal is heated in the air. The magnesium ribbon emits a brilliant light and magnesium oxide, which is white. When oxygen is passed over copper (in the presence of heat), an oxidation reaction occurs, resulting in the formation of black copper oxide. The greater change in mass observed when they start to burned.
What is copper metal ?Copper is a mineral and an element that is essential to our daily lives. It is a significant industrial metal due to its high ductility, malleability, thermal and electrical conductivity, and corrosion resistance. It is a necessary nutrient in our diet.
Metals are a class of materials that have high electrical and thermal conductivity, as well as malleability, ductility, and high light reflection. Copper (Cu), aluminium (Al), and other metals are examples.
The combustion of magnesium ribbon is a combined reaction. This is due to the fact that magnesium reacts with oxygen to form the single product magnesium oxide. When magnesium ribbon is burned in air, it reacts with the oxygen in the air to form magnesium oxide.
Thus, 3g of clean mg ribbon and 8g of clean copper metal were burnt separately in equal volume of air and both mass reacted completely with air the greater change in mass observed when they start to burned.
To learn more about copper metal, follow the link;
https://brainly.com/question/11992235
#SPJ2
Ribbon diagrams shows secondary structures and appear less detailed than other model types. In one to two sentences, give a reason the chemists would use ribbon diagrams. What type of information do they provide?
Answer:
They show helixes and proteins
Explanation:
Ribbon diagrams are the Richardson diagrams that represent the protein structures. Chemist prefers using Ribbon diagrams to show the various structure of the proteins.
What are ribbon diagrams?The Ribbon diagram is used to represent the structural organization of the protein in the polypeptide chains or individually. It shows the three-dimensional structure and organization of the protein framework.
The ribbon diagram for the secondary structure of the protein shows the intramolecular and intermolecular structure along with helixes and bonding. It shows the detailed structure of the protein organization including the helix and sheets.
Therefore, the ribbon diagram is used by chemists to determine the structure of the protein as they give the details about the helix and sheet.
Learn more about ribbon diagrams, here:
https://brainly.com/question/2794632
#SPJ2
How many grams of liquid water are produced when 60 grams of ice melt?
Answer: 60 Grams of water are produced, because you can't get more than the amount that was in the original ice cube
Explanation:
Give the relation of energy (E) and frequency (v) as given by Planck. Calculate the frequency and energy of a photon of radiation having wavelength 3000°A.
Pls answer correctly,need it urgently...
Solution:-1
[tex]\\ \sf\longmapsto E=hv[/tex]
E denotes to Energy h denotes to planks constantv denotes to frequency.Solution:-2
Wavelength=3000Å[tex]\boxed{\sf \lambda=\dfrac{c}{v}}[/tex]
[tex]\\ \sf\longmapsto v=\dfrac{c}{\lambda}[/tex]
[tex]\\ \sf\longmapsto v=\dfrac{3\times 10^8m/s}{3000\times 10^{-10}m}[/tex]
[tex]\\ \sf\longmapsto v=0.001\times 10^{18}s^{-1}[/tex]
[tex]\\ \sf\longmapsto v=1.0\times 10^{15}s^{-1}[/tex]
Now
[tex]\\ \sf\longmapsto E=hv[/tex]
[tex]\\ \sf\longmapsto E=6.626\times 10^{-34}Js\times 1.0\times 10^{15}s^{-1}[/tex]
[tex]\\ \sf\longmapsto E=6.6\times 10^{-19}J[/tex]
in h-atom if x is radius of first bohrs orbit de broglie wavelength of an atom in 3rd orbit is a.3πx b.6πx c.9x/2 d.x/2
please I need complete explanation fast
Answer:
can you type question properly.
PLZ HELP ME A girl throws a ball and her dog chases it. What characteristic of living things is this dog demonstrating as it chases the ball?
A. Cells
B. Reproduction
C. Growth
D. Response
Unknown # 29
Flame Test Color: Green
Addition of HCl(aq): Bubbles
Addition of HCl(aq) and BaCl2(aq): NR (No Reaction)
Addition of HNO3(aq) and AgNO3(aq): White precipitate
What is the unknown ionic compound molecular formula?
Answer:
I think it's a sulphate ion, because when you add hydrochloric acid to it it produces bubbles and when you add barium chloride it then produces a white precipitate.its formula is SO4
I hope this helps
what is the gram formula of na2co3
Answer:
106 gfm
Explanation:
element. number masses
Na. 2 23×2
C. 1. 12
O. 3. 16×3
then add
106 gfm
how many atoms of gold are present in 0.6 gm of 18 caral gold? ( 24 caral gold in 100% pure) atomic weight of gold = 197?
Answer:
HERE'S YOUR ANSWERWe are given that the ring is made up of 20 carrat gold. 20 carrat gold means 20 parts of gold and 4 parts of other metal (usually copper or silver). Thus, the percentage of gold in 20 carrat gold will be
= (20 / 24) X 100
= 83.333 %
We can now calculate the mass of gold in the ring. We are given that the ring weighs 300 mg. So, the mass of gold in ring will be
= (83.333 / 100) X 300
= 250 mg
Thus, the mass of gold in 300 mg of the ring is 250 mg.
Now the molar mass of gold is 197 g. This means that there are 6.023 X 1023 atoms of gold in 197g of gold. Thus
197g of gold = 6.023 X 1023 atoms of gold
1g of gold = (6.023 X 1023 ) / 197 atoms of gold
250 mg or 0.25g of gold = (6.023 X 1023 X 0.25) / 197 atoms of gold
= 7.643 X 1020 atoms of gold
HOPE IT HELPS MAN ☺️what is the material used to make plaster of paris?
Answer:
gypsum
Explanation:
gypsum is used to make plaster of Paris
Answer:
Simple squamous epithelium
This type of epithelia lines the inner surface of all blood vessels (endothelium), forms the wall of alveolar sacs in the lung and lines the body cavities (mesothelium). The primary function of simple squamous epithelia is to facilitate diffusion of gases and small molecules.
Explanation:
isme talk kro
How can biodiesel be a solution to the problems of climate change?
Answer:
BIOHEAT is a biodiesel mix that can be utilized (without equipment changes) in most home heaters. BIOHEAT promptly diminishes various hurtful discharges from heater use (up to 80% contingent upon blend used) and the oil is made from nearby feedstocks like utilized cooking oil
Vitamin C is a water-soluble vitamin, so your body doesn't store it. You have to get the required amount from your diet (citrus fruits are a great source!), or you could take a daily vitamin C supplement pill. Vitamin C is ascorbic acid, so to determine how much vitamin C (acid) has been placed in each pill, you could do an acid-base titration. One vitamin C pill was dissolved in water and titrated to an endpoint by 16.00 mL of a 0.447 M solution of NaOH. How many grams of ascorbic acid were there in the pill? (MW of ascorbic acid is 176.1 /mol). Explain and show your work.
Answer:
Mass of ascorbic acid in the pill = 7.152 x 176.1/1000 = 1.26 g
Explanation:
The mass of ascorbic acid in the pill would be,
1.26 g
Now,
Moles of ascorbic acid = Moles of NaOH = 0.447 M x 16 ml = 7.152 mmol
Mass of ascorbic acid in the pill = 7.152 x 176.1/1000 = 1.26 g
