name the device of measurement and write its used or its function?​

Answer:

A

Explanation:

The moving object will accelerate as long as a net force is applied. If a net force is not applied, the object will continue to move at a constant speed along the same path in curved spacetime (due to gravity). If the net force continues the velocity of the object will continue to increase until nearly reaching the limit (speed of light).

Answer:

an o point i think

Explanation:

Answer:

The planet's mass and size determine the gravity of a planet

Explanation:

The smaller and less mass a planet has, the less gravitational pull it has on things and vice versa. The same can be applied with all living things, we all have an extremely small gravitational pull.

Answer:

Explanation:

These Hooke's Law problems are tricky. Here's what we need to know that clears up the problem entirely. The final and also the max speed of the block will be reached at the point where the potential energy of the system is 0. So the equation we need, namely,

[tex]KE+PE=\frac{1}{2}kA^2[/tex] can be simplified down to

[tex]KE=\frac{1}{2}kA^2[/tex] and we solve this first for KE:

[tex]KE=\frac{1}{2}(85)(.30)^2[/tex] and, paying NO attention whatsoever to significant digits here (because if you did the answer you get is not one of the choices)

KE = 3.825 J.  Now we can use that value of kinetic energy and solve for the speed we need:

[tex]KE=\frac{1}{2}mv^2[/tex] so

[tex]3.825=\frac{1}{2}(.50)v^2[/tex] so

[tex]v=\sqrt{\frac{2(3.825)}{.50} }[/tex] so

v = 3.91 m/s

Melting: the substance changes back from the solid to the liquid

Evaporation: the process by which water changed from a liquid to a gas.

Boiling: the process by which a liquid turns into a vapor when it is heated to it's boiling point.

Condensation: the substance changed from a gas to a liquid

Freezing: the substance changed from a liquid to solid.

Answer:

Melting is a process that causes a substance to change from a solid to a liquid.

Evaporation is the process of turning from liquid into vapour.

Boiling is the rapid vaporization of a liquid, which occurs when a liquid is heated to its boiling point, the

Condensation is the process of water vapor turning back into liquid water

Freezing is a phase transition where a liquid turns into a solid when its temperature is lowered below its freezing point

Answer:

The 80 mph car

Because the formula says 1/2 mass but for the velocity it is squared

Answer:

Explanation:

3.75 * 10^-7

=3.75 * 1/10^7

=3.75/10000000

=3/800000000

any base which has it's power negative do it's reciprocal then the power will be positive.

Answer:

ya bestie Anda benar terima kasih nanti sekarang selamat tinggal

Answer:

h2 PRD algo trata gevbjjgcvnkoytewxc.

Answer:

12.5kg

Explanation:

The process is explained in the paper

Answer:

The coordinates of the point the bulb should be placed is (2, 0.25)

Explanation:

The given equation of a parabola is presented as follows;

(x - 2)² = 5·(y + 1)

The point the bulb should be placed is the focus of the parabolic mirror to ensure a perfect (straight) beam

The general form of the equation of a parabola is (x - h)² = 4·p·(y - k)

The coordinates of the focus of the parabola for p > 0 f = (h, k + p)

By comparison, h = 2, k = -1, and p = 5/4

∴ The coordinates of the focus of the parabola, f = (2, -1 + 5/4)  = (2, 0.25)

The coordinates of the point the bulb should be placed is at the focus, f =  (2, 0.25).

Explanation:

First find the area of the entire floor:

Area of a rectangle= length × width

( 4000mm× 3600mm)

14400000mm²

Area of one square tile??= side ×side

12cm×12cm

144cm²

Convert cm to mm

1cm²=100mm²

144cm²=144cm²/1cm²×100mm²

=14,400mm²

Number of tiles required to cover the entire floor= 14400000mm²/14400mm²

=1000

Answer:

6 beats

If one fork beats once and another twice in the same time period

you would hear 1 beat. (Same for 2 and 3 beats).

1. set up the equation

2. multiply the variables

3. analyze your results

Answer:

Refer to the attachment!~

Answer:

v = 4 m/s

Explanation:

Given :

Ball X :

Mass, m1 = 8kg ;

Initial Velocity, u1 = 2 m/s

Final velocity, v1 = 0

Ball Y:

Mass, m2 = 4kg ;

Initial Velocity, u2 = 0 m/s

Final velocity, v2 = v

(m1u1 + m2u2) = (m2v2 + m1v1)

(8*2 + 4*0) = (4*v + 4*0)

16 + 0 = 4v + 0

16 = 4v

v = 16 / 4

v = 4 m/s

Answer:

Explanation:

This is the Law of Momentum Conservation which for us looks like this:

[tex][m_xv_x+m_yv_y]_b=[m_xv_x+m_yv_y]_a[/tex] and that should look familiar to you if this is what you are doing in physics. Filling in our particular info:

[(8.0 × 2.0)+ (4.0 × 0.0)] = [(8.0 × 0.0) + (4.0v)] and

16 + 0 = 0 + 4.0v and

16 = 4.0v so

v = 4.0 in the direction of ball X

Answer:

1.17

Explanation:

Given that,

The refractive index of ice wrt air = 1.31

The refractive index of rock salt wrt air = 1.54

We need to find the refractive index of rock salt with respect to ice.

We know that,

refractive index = (speed of light in air or vaccum)/( speed of light in that medium)

So,

The speed of light in ice = c/(1.31)

The speed of light in rock salt = c/(1.54)

So, the refractive index of rock salt with respect to ice​ is :

[tex]\mu=\dfrac{1.54}{1.31}\\\\=1.17[/tex]

So, the required refractive index of rock salt wrt ice is 1.17.

Answer:

The Reactants                                                       Products                          

Copper sulfate + zinc             →                        Zinc sulfate + copper

aluminum + copper chloride     →                    Aluminum chloride + Copper

Copper + Oxygen                     →                      Copper oxide

Explanation:

The Reactants                                                       Products                          

Copper sulfate + zinc                                        Zinc sulfate + copper

aluminum + copper chloride                            Aluminum chloride + Copper

Copper + Oxygen                                             Copper oxide

First reaction can be described as a single replacement reaction

Second reaction is also a single replacement reaction just like the first reaction

The third is a synthesis reaction ( i.e. reaction in which elements combine to form single compound )

Answer:

d. elastic potential energy

Answer:

【 In vector form , if angle between velocity vector and acceleration vector is less than 90° and greater than 0° then it is positive acceleration and if it is less than 180° and greater than 90° then it is negative acceleration. If there is no acceleration vector then it is called zero acceleration. 】

Answer:

A. Object A requires twice the force to stop as Object B.

Explanation:

Inertia can be defined as the tendency of an object or a body to continue in its state of motion or remain at rest unless acted upon by an external force.

Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.

Mathematically, it is given by the formula;

[tex] Acceleration = \frac {Net \; force}{mass} [/tex]

Let's assume the following values;

Mass of object B = 10 kg

Mass of object A = 2 * B = 2 * 10 = 20 kg

Acceleration = 5 m/s²

I. To find the force for B;

[tex] Force = mass * acceleration [/tex]

[tex] Force = 10 * 5 [/tex]

Force B = 50 Newton

II. To find the force for A;

[tex] Force = mass * acceleration [/tex]

[tex] Force = 20 * 5 [/tex]

Force A = 100 Newton

From the calculation, we can deduce that Force A (100 N) is twice or double the value of Force B (50 N).

In conclusion, since object A has twice the mass of object B and both objects are moving at the same speed, object A would require twice the force to stop as Object B.

Answer:

The pressure on piston 1 is always equal to the pressure on piston 2. ... It is equal to the force on piston 1, multiplied by A2/A1. Hydraulic systems are called force multipliers for exactly this reason. A small force can be increased by using hydraulics

Explanation:

Radhe Radhe❤

Answer:

coefficient=1.09N/m×g

coefficient=1.09N/0.413g×10m/s square

coefficient=1.09N/4.13N

coefficent=0.263

f= uK

here f is force, u is cofficient of friction , k is normal force

k = mg

f = umg

1.09 = u × 0.41 × 10

u = 1.09 ÷ 4.1

u = 0.26

Answer:

hlw its jess bregoli

your answer is here

SI (International System of Units) (meter-kilogram-second-ampere-kelvin-mole-candela)

FPS (foot-pound-second)

MKS (meter-kilogram-second)

CGS (centimeter-gram-second)

EMU (Electromagnetic) (centimeter-gram-second-abampere)

ESU (Electrostatic) (centimeter-gram-second-abcoulomb)

Atomic (bohr-electron mass-atomic second-electron)

MTS (meter-tonne-second)

Explanation:

hope it may help you !!

Answer:

there are 4 types of systems. They are ,

SI - accepted world wide

MKS - meter  kilogram  second

CGS - centimeter  gram  second

FPS - foot  pound  second

hope it helps.

Answer:

9.6 minutes

Explanation:

We have that it takes Claire [tex]t=0.16h[/tex] amount of time to get to school

[tex]t=0.16h[/tex]

From the Question we are told that

Velocity[tex]v= 25 km/h.[/tex]

Distance [tex]d=4km[/tex]

Generally the equation for Time  is mathematically given as

[tex]v=\frac{d}{t}\\\\t=\frac{4}{25}\\\\t=0.16h[/tex]

For more information on this visit

https://brainly.com/question/22271063

Answer:

acceleration is the vector quantity because it depends on particular direction and has magnitude

Answer:

105.6 KJ

Answer

3.7/5

4

hope this will help you friend.

Answer:

22

Explanation:

Answer:

45.5 v

Explanation:

I = 1.3 A

R = 35 Ω

V = I * R

V = 1.3 * 35 = 45.5 v

Answer:

Explanation:

I'm assuming you missed the decimal point in the initial velocity and that it should be 4.0 m/s. If after a half of a second it is moving a tiny bit slower, it would be because of air resistance. You can only neglect air resistance if the problems you are doing tell you neglect it.

Answer:

Air resistance

Explanation:

I got it correct on the quiz :)

Answer:60

Explanation: