Answer:
Here are two security mechanisms that are widely used in electrical circuits as well as appliances.
Explanation:
Electric Fuse: A sequence, an electrical fuse remains attached which preserves the connection from overburdening as well as avoids short-circuiting. Proper apparatus throughout all electrical circuits whereby any existing leakage in such an electrical system is passed to the surface while individuals who use the equipment are not getting the shock.Eli and Andy want to find out which of the two is stronger. Eli pushes a table with a force of 120 newtons while Andy pushes the table from the opposite side with a force of 125 newtons. Ignoring the masses of Eli and Andy, what is the resultant acceleration of the table if its mass is 10.0 kilograms?
Answer:
a = 0.5 m/s²
Explanation:
the type of problem is called a Newtons second law of motion.
and the equation would be the sum of F = m * a where m = mass and a = acceleration
forces are 125N and the opposite direction is 120N
Eli pushes the table with a force of 120N towards Andy
and
Andy pushes the table with a force of 125N towards Eli
mass of table given as 10 kg.
using the equation
120N - 125N = 10kg * a
a = (120-125) / 10
a = -0.5 m/s² so the acceleration is in the direction of Andy's force towards Eli.
therefore a = 0.5 m/s²
Answer:
B.
0.50 meters/second2
Explanation:
The same motor is used in rockets with different masses. The rockets have different accelerations. According to Newton’s second law, how is acceleration expected to change as the rocket mass increases? As rocket mass increases, acceleration decreases. There are no changes in acceleration, as it would depend on the amount of force. As rocket mass increases, acceleration increases. Acceleration cannot be predicted based on changes in mass.
Answer:
As rocket mass increases, acceleration decreases.
Explanation:
From Newton's second law of motion;
F= ma
Where;
m= mass of the object
a= acceleration of the object
Hence we can write;
a= F/m
This implies that an increase in mass (m) will lead to a decrease in acceleration if the force on the object is held constant.
Hence, if the rockets have different masses, they will have different accelerations.
Hello!
---------
As rocket mass increases, acceleration decreases.
Hope this helps! The rest are available on Quizlet at "Unit 6: Lesson 4 Force, Mass and Acceleration". Thanks and good luck!
what is the distance fallen for a freely falling ojvect 1 s after being dropped from a rest position
Answer:
111op
Explanation:
Answer:
11op
Explanation:good job and work hard
7. Calculate the force applied on an object if the Pressure exerted is 90 Pascal over an area of 900 cm2.
Answer:
Explanation: pressure = force / area
Rearrange to get: force = pressure x area. 900 cm2 = 0.09 m2
force = 90 x 0.09
= 8.1 N
John owns a used 2003 mustang Mach 1, he spots a news crew with a bunch of people what should he do? A) Rev his engine at the highest RPM B) Do a burnout C) Drive near the Crowd and drop a gear and hurl into the crowd D) ALL OF THE ABOVE
Each of the three choices is tasteless, exhibitionist, juvenile, and dangerous. John should do none of them.
Encountering a news crew, there's no reason for John to call attention to himself in a childish way, or interfere with their work in any way.
What he should do is:
==> Slow down
==> Pass the scene cautiously
==> Resume his normal, legal speed quietly, in case the crew happens to be recording audio at the moment.
Mysteriously, this course of action is nowhere to be found among the choices listed.
Answer:
all three options :)
Explanation:
cuz merica
An aircraft travelling at 600km/h accelerates steadily at 10km/h per second. Taking the speed of sound as 1100km/h at the aircraft's altitude how long will it take to reach the sound barrier?
speed of sound is the final velocity [tex] v=1100[/tex]
and initial velocity $u=600$ , $a=10$
$v=u+at$
$t=\dfrac{v-u}{a}= \dfrac{500}{10}$
$\implies t=50 h$
A 310 turn solenoid with a length of 18.0 cm and a radius of 1.60 cm carries a current of 1.90 A. A second coil of four turns is wrapped tightly around this solenoid, so it can be considered to have the same radius as the solenoid. The current in the 310 turn solenoid increases steadily to 5.00 A in 0.900 s.(a) Use Ampere's law to calculate the initial magnetic field in the middle of the 310 turn solenoid.T(b) Calculate the magnetic field of the 310 turn solenoid after 0.900 s.T(c) Calculate the area of the 4-turn coil.m2(d) Calculate the change in the magnetic flux through the 4-turn coil during the same period.Wb(e) Calculate the average induced emf in the 4-turn coil.VIs it equal to the instantaneous induced emf? Explain.(f) Why could contributions to the magnetic field by the current in the 4-turn coil be neglected in this calculation?
Answer:
Given that;
Number of turns in the solenoid N = 310
Length of the solenoid L = 18 cm = 0.18 m
Radius of the solenoid r = 1.60 cm = 0.016 m
Current in the first Circuit I₁ = 1.90A
Number of turns in second coil N₂ = 4
Final Current solenoid I₂ = 5.0 A
Time interval to change the time Δt = 0.9 s
a)
According to Ampere's law, magnetic field inside a conductor is calculated as;
B₁ = ц₀N₁I₁ / L
(ц₀ = 4π × 10⁻⁷ constant)
therefore we substitute
{(4π × 10⁻⁷) × 310 × 1.9A} / 0.18m
= 0.0041 T
b)
Magnetic field inside the solenoid after t = 0.9
B₁ = ц₀N₁I₂ / L
= {(4π × 10⁻⁷) × 310 × 5.0A} / 0.18m
= 0.0108 T
c)
Area of coil is
A = πr²
A = π × ( 0.016 )²
A = 0.000804 m²
d)
Change in magnetic influx is
dФ = (B₂ - B₁) A
= ( 0.0108 T - 0.0041 T) × 0.000804 m²
= 0.0000053868 ≈ 5.39 × 10⁻⁶
e)
Average induced emf is
e = -N₂ ( dФ / dt )
e = ( -4 ) ( 5.39 × 10⁻⁶ / 0.9)
e = - 2.39 × 10⁻⁵V ( NOTE, this is not equal to the instantaneous induced emf )
f)
The induced emf is very low, so the contributions to the magnetic field in the coil is Negative.
Using your own word, tell me what is the difference between an element and a compound? Make sure to give an example of each.
Answer:
Hey there!
Elements only contain one type of atom, and a compound contains atoms of different elements chemically combined together. For example, gold is an element, because it only is made of gold atoms, where water or H2O is a compound.
Let me know if this helps :)
Answer:
A compound contains atoms of different elements chemically combined together in a fixed ratio. An element is a pure chemical substance made of same type of atom. Elements contain only one type of atom.
Example:
Explanation:
the resistance per meter is 10 ohm. if the resistance of the material of the wire is 50 then 10^-8 ohm. find the area of cross section of the wire.
the question is at some point wrong or missing a word please help me with the question and answer!
Answer:
5×10⁻⁸ m²
Explanation:
I assume you mean the resistivity of the material is 50×10⁻⁸ Ωm.
R = ρL/A
10 Ω = (50×10⁻⁸ Ωm) (1 m) / A
A = 5×10⁻⁸ m²
The cartesian coordinates of a point in the xy plane are x = −7.11 m, y = −4.41 m. Find the distance r from the point to the origin. Answer in units of m.
Explanation:
Use Pythagorean theorem:
r² = x² + y²
r² = (-7.11 m)² + (-4.41 m)²
r = 8.37 m
Use trig to find the angle.
tan θ = y / x
tan θ = (-4.41 m) / (-7.11 m)
θ = 31.8° or 211.8°
Since x is negative and y is negative, the point is in the third quadrant, so θ = 211.8°.
Or, if we subtract 360°, θ = -148.2°.
*If someone says v-u=0 ,what does it mean. *What is the relation among mometum,mass and velocity. *A moving bus a little distance forward even when breaks are applied on it which Newton's laws work here? *Under what conditions acceleration of a moving object will be zero?
Answer:
1) It means that the acceleration is 0
2) Momentum, p = Mass, m × Velocity, v
3) Newton's second law of motion
4) The conditions where there are no resultant forces acting on the object
Explanation:
1) The value v - u = 0 means that the acceleration is 0
The relation between v and u is v = u + a·t
v - u = a·t
When v - u = 0 we have;
a·t = 0
a = 0 or t = 0
Acceleration, a = 0
2) The relation between momentum, mass and velocity is
Momentum, p = Mass, m × Velocity, v
p = m × v
3) The bus moving a little distance forward even when the breaks are applied is due to the following relation;
Force = Rate of change of momentum produced
Which is Newton's second law of motion
Therefore, where the the force is low, the rate of change of the momentum and therefore, the velocity will be low, and the bus will still move further after applying the breaks
4) According to Newton's first law of motion, the conditions under which the acceleration of a moving object will be zero includes conditions where there are no resultant forces acting on the object.
A 1.00-kg glider attached to a spring with a force constant 25.0 N/m oscillates on a frictionless, horizontal air track. At t = 0, the glider is released from rest at x = -2.80 cm (that is, the spring is compressed by 2.80 cm). (a) Find the period of the glider's motion. How does the period depend on the mass and the spring constant? Does it depend on the amplitude of oscillation? s (b) Find the maximum values of its speed and acceleration. speed m/s acceleration m/s2 (c) Find the position, velocity, and acceleration as functions of time. (Where position is in m, velocity is in m/s, acceleration is in m/s2, and t is in s. Use the following as necessary: t.) x(t) = v(t) = a(t) =
Answer:
a) T = 1.26 s , b) v_max = 0.14 m / s , a_max = 0.7 m / s²
c) x = 0.028 cos (5 t) , v = - 0.14 sin 5t, a = - 0.7 cos 5t
Explanation:
This is a simple harmonic motion exercise that is described by the equation
x = A cos (wt +Ф)
with
w = √ (k / m)
let's apply this expression to our case
a) Angular velocity is related to frequency
w = 2π f
frequency and period are related
f = 1 / T
we substitute
2π / T = √ (k / m)
T = 2π √(m / k)
let's calculate
T = 2π √(1/25)
T = 1.26 s
In the expression for the period, the amplitude does not appear, therefore there is no dependence, as long as Hooke's law is fulfilled, which is correct for small amplitudes.
b) in the initial equation we have the position as a function of time, let's use the definition of speed and acceleration
v = dx / dt
v = - A w sin (wt + Ф)
the speed is maximum when the sine is -1
v_max = A w
w = √ (k / m)
w = √ 25/1
w = 5 rad / s
the amplitude of the movement is equal to the maximum compression of the spring
A = 2.8 cm = 0.028 m
we substitute
v_max = 0.028 5
v_max = 0.14 m / s
acceleration
a = dv / dt
a = - A w² cos (wt + Ф)
the acceleration is maximum when the cosine is -1
a_max = A w²
let's calculate
a_max = 0.028 5²
a_max = 0.7 m / s²
c) let's start by finding the phase constant
v = -A w cos (wt + Ф)
at t = 0 they indicate that the system has v = 0
0 = -A w sin (0 + Ф)
Ф = sin⁻¹ 0
Ф = 0
we write the equation
x = 0.028 cos (5 t)
v = - A w sin (wt + Ф)
v = - 0.028 5 sin (5t + 0)
v = - 0.14 sin 5t
acceleration
a = - A w² cos (wt + Ф)
a = - 0.028 5 2 cos (5 t + 0)
a = - 0.7 cos 5t
A student uses a spring scale attached to a textbook to compare the static and kinetic friction between the textbook and the top of a lab table. If the scale measures 1,580 g while the student is pulling the sliding book along the table, which reading on the scale could have been possible at the moment the student overcame the static friction?
Answer:1860g
Explanation:The force would have to be greater than 1580g, which is when the student is pulling the sliding book with the spring scale
a metre rod on wedge is example of unstable equilibrium.why
Answer:
because it has no balance
Is it (P)otential or (K)inetic energy
Answer:
Think of it like this potential energy is exactly what it sounds like it has potential. while kinetic energy which is what the body possesses by virtue of being in motion.
Explanation:
Hi :) how to do this?
Answer:
The answer is b
Hope this helps you!
An object weighs 980N on the earth’s surface (i) What is its mass? (ii) If the same object weighs 360N on another planet, find the force of gravity on that planet.
Which of these is an example of an elastic collision? A. The cue ball crashing into the eight balls on a pool table. B. Two cars colliding in an accident and moving together in the end. C. A kid landing a flip on a trampoline.
Answer:
The cue ball crashing into the eight balls on a pool table.
Explanation:
Elastic and inelastic collisions are two types of collisions.
For elastic collision, both the momentum and the kinetic energy before and after the collision remains conserved.
Out of the given options, the option that shows an example of an elastic collision is option A " The cue ball crashing into the eight balls on a pool table." All the eight balls after crashing moves with different velocity.
16. Two of Jupiter's Galilean moons, lo and
Europe, make a complete revolution around it
over the periods T1=1.77 days and T2 = 3.55
days. Knowing that lo revolves around Jupiter
at a distance of 421600 km, determine the
linear velocity of Europe's motion in its orbit.
Answer:
The linear velocity of europe's motion in its orbit is 7875.58 km/hr.
Explanation:
Given that,
Time period of lo = 1.77 days
Time period of europa = 3.55 days
Distance of lo from jupiter = 421600 km
We know that,
Distance of europa from jupiter = 671000 km
We need to calculate the linear velocity of europe's motion in its orbit
Using formula of velocity
[tex]v=\dfrac{d}{t}[/tex]
Where, d = distance between europa and jupiter
t = time
Put the value into the formula
[tex]v=\dfrac{671000}{3.55\times24}[/tex]
[tex]v=7875.58\ km/hr[/tex]
Hence, The linear velocity of europe's motion in its orbit is 7875.58 km/hr.
SHOW ADEQUATE WORKINGS IN THIS SECTION
12. Wale and Lekan of 55kg and 60kg respectively ran a race of 200m.
i. Calculate their work done in KJ
ii. If wale finished the race in 25secs while Lekan finished in 30secs, calculate their
power and who is more powerful out of these two. ( g = 10m/secs)
13. A machine has a velocity ratio of 5 and is 800
/0 efficient. If the machine is carrying a load
of 200kg, what will be effort applied?
Please help me answer anyone that you understand
Answer:
12 i. The work done by Wale = 107.910 kJ
The work done by Lekan = 117.720 kJ
Total work done = 225.36 kJ
ii. Wale's power = 4.3164 kW
Lekan's power = 3.924 kW
Wale has more power and is more powerful than Lekan
13. 313.92 N
Explanation:
i. The work done, W = Force, F × Distance moved by the force, D
The given parameters are
The mass of Wale = 55 kg
The mass of Lekan = 60 kg
The acceleration due to gravity, g =9.81 m/s²
The motion force of Wale and Lekan are;
Motion force of Wale = 9.81 × 55 = 539.55 N
Motion force of Lekan = 9.81 × 60 = 588.6 N
The work done by Wale = 539.55 × 200 = 107910 J = 107.910 kJ
The work done by Lekan= 588.6 × 200 = 117720 J = 117.720 kJ
107910 + 117720 =225630 J = 225.36 kJ
ii. Power = Work done/time
Wale finished the race in 25 s, therefore, his power = 107910/25 = 4316.4 W
Lekan finished the race in 30 s, therefore, his power = 117720/30 = 3924 W
Wale has more power and is more powerful than Lekan
13. The velocity ratio = 5
V. R. = Distance moved by effort/(Distance moved by load)
Efficiency = 80%
Work done by effort = x
Work done by machine = Efficiency × Work done by effort = 0.8 × x
Distance moved by effort, E = V. R. × Distance moved by load, D = 5 × D
Work done by effort = Force × Distance moved = 200×9.81× E
Work done by effort = 1962×E = 1962×E = 1962×5×D
Work done by machine = 1962 × D, when D = 1, we have;
0.8 × 1962×1 = 1569.6 J
Work done by effort = Force × Distance moved
Work done by effort = Force × 5×D = Force × 5 (D = 1)
From the principle of conservation of energy, we have;
Energy is neither created nor destroyed
Therefore
Work done by effort = Force × 5 = 1569.6 J
Force = 1569.6 /5 = 313.92 N.
How do parts of a fancy cup (metal like cup) work together to keep a drink cold?
Answer:
“They may feel colder but that's only an illusion,” Dr. Begley says. “Copper mugs actually absorb heat from the room faster than a glass.” Copper is an excellent thermal conductor, meaning it transfers heat from hot sources (like the room or your hand) to cold sources (like your drink) very efficiently.
Explanation:
The image formed is 0.25 times the size of the object and 10 cm behind the pinhole. If the height of image on screen is 6 cm what is the distance of the object from the screen?
Answer:
40 cm
Explanation:
Magnification of a pinhole camera is given by;
M= height of image/ height of object
Since;
M= 0.25
Height of image = 6cm
Height of object = height of image / M
Height of object = 6/0.25 = 24 cm
Height of image/ height of object = distance of image from pinhole/ distance of object from pinhole
Since the distance of image from pinhole = 10cm
Let the distance of object from pinhole be x
6/24 = 10/x
6x = 240
x= 240/6
x = 40 cm
a body weighs 100newtons when submerged in water. calculate the upthrust action on the body
Answer:
Upthrust = 20 N
Explanation:
The question says that "A body weighs 100N in air and 80N when submerged in water. Calculate the upthrust acting on the body ?"
Upthrust is defined as the force when a body is submerged in liquid, then liquid applies a force on it.
ATQ,
Weight of body in air is 100 N
Weight of body in water is 80 N
Upthrust is equal to the weight of body in air minus weight of body in water.
Upthrust = 100 N - 80 N
Upthrust = 20 N
So, 20 N of upthrust is acting on the body.
Calculate the current passing through a conductor of resistance 4ohms. If a potential difference of 15V its ends______
Explanation:
current = velocity/resistance
I = V/R
15/4
current = 3.75A
hope this helps...
Determine the gradient and the co-ordinates of the x and y intercept of line whose equation is 2y + 3x = 1
Answer:
The x - intercept is 1/3
The y - intercept is 1/2
The gradient is -3/2
Explanation:
To find the x - intercept of the equation 2y + 3x = 1, we find the value of x when y = 0. So,
2y + 3x = 1
2(0) + 3x = 1
0 + 3x = 1
3x = 1
x = 1/3
So, the x - intercept is 1/3
To find the y - intercept of the equation 2y + 3x = 1, we find the value of y when x = 0. So,
2y + 3x = 1
2y + 3(0) = 1
2y + 0 = 1
2y = 1
y = 1/2
So, the y - intercept is 1/2
To find the gradient of the equation 2y + 3x = 1, we re-write it in gradient intercept form by making y subject of the formula.
So, 2y + 3x = 1
2y = -3x + 1
y = -3x/2 + 1/2
The coefficient of x which equals -3/2 is the gradient.
The gradient is -3/2
If a suitcase has a mass of 20 kg, what is the force of gravity acting on it?
Explanation:
Assuming the suitcase is near the surface of the earth, g = 9.8 m/s².
F = ma
F = (20 kg) (9.8 m/s²)
F = 196 N
answer answer answer it it it
Answer:
Parachutes
Explanation:
Your parachute allows you to descend more slowly because it lowers terminal velocity by increasing your air resistance. Most parachutes are designed to create a large amount of drag and allow you to land at a safe, low speed.
HOPE THIS HELPS!!!
MARK IT AS BRAINLIEST !!!! ( the crown icon sometimes )
what is the scientific notation for 1,500,000
Answer:
[tex]1.5 * 10^6[/tex]
Explanation:
Given
Digit: 1,500,000
Required
Represent using scientific notation
We start by expressing the given digit as a product of 1.5 and a multiple of 10
[tex]Digit = 1.5 * 1,000,000[/tex]
1,000,000 can be represented as 10⁶
So; the digit becomes
[tex]Digit = 1.5 * 10^6[/tex]
Hence, the scientific notation of 1,500,000 is 1.5 * 10⁶
A net force of 0.7 N is applied on a body. What happens to the acceleration of the body in a second trial if half of the net force is applied?(1 point) The acceleration is double its original value. The acceleration is half of its original value. The acceleration is the square of its original value. The acceleration remains the same.
Answer:
The answer is The acceleration is double its original value.
Explanation:
It is because of the second trial of accelaration. Because of this, an object's acceleration doubles from its original value.Hope this helps....
Have a nice day!!!!
Answer:
The acceleration is half of its original value
Explanation:
Which units represent density? Select all that apply.
Answer:
D=M/V. That's the formula. Density is expressed, in cubic centimeters.
Explanation:
Answer:g/m³
g/cm³
-kg/L
-kg/cm³
Density in physics, is defined as the mass of the object over its volume. Density is considered as how much matter is contained in a single object by its volume or the matter that it occupies.
D = m / v
Explanation:
