Answer:
bonding conductor
Explanation:
they have bond of conductor between them.
The world is made up of
Answer:
Explanation:
The world is made up of living beings .
write any two conditions at which a body of certain mass weightless
Answer:
A body becomes weightless in a zero-gravity scenario and when a force is applied to a body that is equal and opposite to the force of gravity. If the body is falling only under the influence of gravity.
Answer:
A body becomes weightless in a zero-gravity scenario and when a force is applied to a body that is equal and opposite to the force of gravity.If the body is falling only under the influence of gravity.
can you answer with working out
Specific heat capacity is _____.
greater for metal than for wood
the amount of heat required to raise the temperature of 1g of a substance 1 oC
represented by the symbol, Q
all of these
Answer:
all of this
Explanation:
How much water will the measuring cup have if you poured 1/2 of it out?
How is a slump different from creep?
Answer:
Is this chemistry or ELA!
the text of oxygen gas in the laboratory
Explanation:in testing for oxygen a glowing splint is used.
the glowing splint is brought in the presence of the test tube containing the gas
the glowing splint rekindles or lights up showing that oxygen is present.
this is a positive test because oxygen supports burning or combustion
High-pressure liquid chromatography (HPLC) is a method used in chemistry and biochemistry to
purify chemical substances. The pressures used in this procedure range from around 500
kilopascals (500,000 Pa) to about 60,000 kPa (60,000,000 Pa). It is often convenient to know
the pressure in torr. If an HPLC procedure is running at a pressure of 3.20x10^8 Pa , what is its
running pressure in torr?
Express the pressure numerically in torr.
►
3.20 x 10^8 Pa = _____ torr
Answer:
2,400,000 torr (3 s.f.)
Explanation:
Convert the pressure from Pascal to atm first:
[tex]\boxed{1 \: atm = 101325 \:Pa }[/tex]
3.20 ×10⁸ Pa
= [(3.20 ×10⁸) ÷101325] atm
= 3158.2 atm (5 s.f.)
Convert atm to torr:
[tex]\boxed{1 \: atm = 760 \: torr}[/tex]
3158.2 atm
= (3158.2 ×760) torr
= 2400000 torr (3 s.f.)
Select the structure corresponding to trans-3-octene.
Answer: B
Explanation:
Answer:
The Correct Answer Is B.
. De las siguientes soluciones:
1. 20 ml de alcohol etílico mezcladas con 80 ml de agua.
2. 500 ml de agua con 20 g de sal disueltas (V Sln: 500ml).
3. 80 g de sal en 2 litros de agua.
a) Identifica el soluto y solvente de cada solución y explica ¿por qué?
b) Encuentra la concentración por peso de la solución número 3 c) Entre la disolución 2 y 3 ¿Cuál presenta mayor concentración?
por favor lo necesito para hoy ¡gracias!
Answer:
can u translate this to English? I might be able to help
a) Solution 1: Solute is ethyl alcohol, solvent is water. Solution 2 and 3: Solute is salt, solvent is water.
b) Concentration by weight of solution 3: Approximately 3.85%.
c) Solution 3 has a higher concentration than solution 2.
a) Solutions and their solutes and solvents:
Solution 1: The solute is ethyl alcohol, and the solvent is water. This is because ethyl alcohol is the substance that dissolves in water to form the solution.
Solution 2: The solute is salt, and the solvent is water. Salt is the substance that dissolves in water to form the solution.
Solution 3: The solute is salt, and the solvent is water. Similar to solution 2, salt is the substance that dissolves in water to form the solution.
b) Weight concentration of solution number 3:
The weight concentration is calculated by dividing the mass of the solute (80 g of salt) by the total mass of the solution (80 g of salt + 2000 g of water):
Weight concentration = (80 g / 2080 g) * 100% ≈ 3.85%
c) Comparison of concentrations between solution 2 and 3:
Solution number 3 has a higher concentration than solution 2, as the weight concentration of solution 3 is approximately 3.85%, while the exact amount of water is not provided for solution 2 to calculate its concentration. However, solution 2 contains only 20 g of salt dissolved in 500 ml of water, which implies that the concentration will be lower than solution 3. Therefore, solution number 3 has a higher concentration compared to solution 2.
To learn more about Solutions, here
https://brainly.com/question/30665317
#SPJ2
please help with the attached picture question 21, 22, 23
Explanation:
21. The given molecule for cracking is tetradecane.
On cracking it forms one mole of decane (C10H22) and two moles of ethene gas.
The chemical equation is shown below:
[tex]C_1_4H_3_0->C_1_0H_2_2+2C_2H_4[/tex]
22. The essential condition for the formation of an ester is the reaction of alcohol and acid in presence of concentrated sulfuric acid.
Thus among the given options, the first option is the correct one.
23. Isomers of butanol are shown below:
It is 2-butanol.
The position of -OH group changes to the second carbon.
Re-word this statement: Ionic Radii are changing as you move down the column because the atoms in lower rows have more energy levels, which makes the valence electrons farther from the nucleus, so it takes less energy for them to be pulled away.
The Ionic radii are changing as you move across a row because each element has one more proton, which increases the attraction of the nucleus.
Answer:
ty po hehe
Explanation:
mark me as brainliest po thank you
What happens to a glass of sugar solution when sugar is added to it?
The number of moles of water increases.
The number of moles of water decreases.
The molarity of the solution increases.
The molarity of the solution decreases.
When sugar is added to a glass of sugar solution, the molarity of the solution increases. Details about molarity can be found below, which is the third option.
What is molarity?Molarity is a term used to identify the amount of solute, in moles, dissolved in a solvent by volume. Molarity is expressed as moles per liter (mol/L).
However, molarity is directly proportional to the amount of solute in solution. This means that as the amount of solute increases, molarity also increases.
Therefore, when sugar is added to a glass of sugar solution, the molarity of the solution increases.
Learn more about molarity at: https://brainly.com/question/2817451
#SPJ1
Describe weighted average
Answer:
Explained below
Explanation:
In simple average, we just add all the given data variables and divide it by the number of data given.
However, when it comes to weighted average, what we do is that we multiply each given variable by their weights and then divide the sum of that by the sum of the weights.
Thus, if the variables are denoted by x and their weights are denoted by y, then we have;
Weighted average = Σ(xy)/Σy
its not a question but i wanted to tell you guys that if you guyz like my answers then please don't forget to give like and follow at the same time. I am not forcing you to follow only if you guyz like my answer then like or follow. THANKS FOR READING..
Answer:
thank you for this oibnki
Answer:
Sure I'll go ahead and like your answers and follow you if that's what you wanted! :)
Explanation:
what do you mean by 1 joule work
Answer:
Joule is the SI unit of work. 1 Joule is amount of work done when a force of 1 Newton displaces a body through a distance of 1m in the direction of the force applied.
mention two factors which affect pressure due to liquid contained in a vessel
Answer:
depth of the liquid and nature of liquid affects the pressure due to liquid contained in a vessel
Answer:
Two factors influence the pressure of fluids. They are the depth of the fluid and its density. A fluid exerts more pressure at greater depths
Plz Help I have One more time To retake and I can't fail it..
Answer:
B. Radar uses radio and the siren uses sound waves. both exhibit in the Doppler effect.
sorry if this is wrong
How many liters of carbon dioxide can be “scrubbed”, or removed, with 3.45 Liters of 0.10 M of lithium hydroxide solution?
Answer:
The correct answer is - 3.864 L of CO2.
Explanation:
A mixture of reactants and products for the reaction shown below is at equilibrium in a 5.0 L container what would most likely happen to the equilibrium if the volume of the container will reduced to 3.0 L?
Since the volume decreased, it means that the pressure is going to rise. Thus, the equilibrium of the reaction will shift in the direction that has the least amount of moles.
The statement, that describes the equilibrium "will change in the direction with the minimum moles."
What is an equilibrium?A condition of equilibrium has become one of balance. Chemical equilibrium is the state in which both the reactants and products are present in concentrations that have no further tendency to change with time, resulting in no observable change in the system's properties.
When volume decreases, the equilibrium shifts to favor the direction that produces fewer moles of gas. When the volume is raised, the equilibrium shifts in favor of the direction that produces the most moles of gas. Because the container's volume will be lowered from 5.0 L to 3.0 L, the pressure will rise. As a result, the equilibrium of the reaction will shift in the direction with the fewest moles. When the volume is reduced, the pressure rises. This demonstrates that a gas's pressure is inversely proportional to its volume.
Hence the correct answer is equilibrium will change in the direction with the minimum moles.
Learn more about equilibrium here
https://brainly.com/question/13463225
#SPJ2
Calculate the molar mass of the following compound: Ca3P2
Answer:
The molar mass of the compound given is 182.182 g/mol.
Explanation:
To calculate the molar mass of the compound, we must multiply the number of moles of each element by the the individual molar mass of each element and add them together.
Let's start with Calcium. The molar mass of Calcium is 40.078. In this compound, we have three moles of Calcium, so we should multiply this number by 3.
40.078 g/mol * 3 mol = 120.234 g
Now, let's do the same for Phosphorus.
30.974 g/mol * 2 g/mol = 61.948 g
To find the molar mass of the entire compound, we should add these two values together.
120.234 g + 61.948 g = 182.182 g
Therefore, the correct answer is 182.182 g/mol.
Hope this helps!
what is the organic molecule
Answer:
kinetic energy is the molecules
Explanation:
A molecule of the kind normally found in living systems. Organic molecules are usually composed of carbon atoms in rings or long chains, to which are attached other atoms of such elements as hydrogen, oxygen, and nitrogen.
Element X and Y are two different elements that are placed in the same group in the Periodic Table of Elements. Which of the following statements is correct about their atoms?
A Atoms of element X and Y have same number of electrons
B Atoms of element X and Y have different number of protons
C Number of neutrons for atom X and Y changes during formation of an ion
D Nucleon number for atom X and Y is the total number of protons and electrons
Answer:
A Atoms of element X and Y have same number of electrons
The volume of a gas at 6.0 atm is 2.5 L. What is the volume of the gas at 75 atm at
the same temperature? (5 points)
1) 1.0 L
0 2 2) 1.5 L
3) 2.0 L
O 4) 3.0L
The volume of a gas at 6.0 atm is 2.5 L. What is the volume of the gas at 7.5 atm at
the same temperature? (5 points)
1) 1.0 L
2) 1.5 L
3) 2.0 L
4) 3.0L
Answer:
2.0 L
Option C) 2.0L is the correct answer.
Hence, at the same temperature, as the pressure is increased to the given value, the volume of the gas decreases to 2.0L.
Boyle's law
Boyle's law states that "the volume V of a given quantity of gas is inversely proportional to its pressure P as long as temperature remains constant.
Boyle's law is expressed as;
P₁V₁ = P₂V₂
Given the data in the question;
Initial Volume V₁ = 2.5LInitial pressure P₁ = 6.0atmFinal pressure P₂ = 7.5atmFinal volume V₂ = ?To determine the final volume of the gas, we substitute our given values into the expression above.
P₁V₁ = P₂V₂
V₂ = P₁V₁ / P₂
V₂ = ( 6.0atm × 2.5L ) / 7.5atm
V₂ = 15Latm / 7.5atm
V₂ = 2.0L
Option C) 2.0L is the correct answer.
Hence, at the same temperature, as the pressure is increased to the given value, the volume of the gas decreases to 2.0L.
Learn more about Boyle's law here: brainly.com/question/1437490
What must scientists look for in their experiment or their data to make sure it is accurate?
Answer:
Scientists must look in their experiment/data to check for accuracy because they don't want to make any mistakes, and most importantly have to make sure they have the right information to proceed.
Explanation:
^
When it’s summer in the northern hemisphere what Season is it in the Southern Hemisphere
Answer:
Winter
Explanation:
I dont know but whatev
Answer:
Winter
Explanation:
The seasonal cycle in the polar and temperate zones of one hemisphere is opposite to that of the other. Therefore, When it is summer in the Northern Hemisphere, it is winter in the Southern, and vice versa.
hope it helps :)
2.0 kilograms of lithium hydroxide can “scrub”, or remove, how many liters of carbon dioxide at standard conditions?
Answer:
0.94 L
Explanation:
The equation of the reaction is;
2LiOH + CO2 -----> Li2CO3 + H2O
Number of moles LiOH = 2.0/23.95 g/mol = 0.084 moles
2 moles of LiOH scrubs 22.4 L of CO2
0.084 moles of LiOH scrubs 0.084 moles × 22.4/2
= 0.94 L
If 3.5 kJ of energy are added to a 28.2 g sample of iron at 20 degrees C, what is the final temperature of the iron in kelvins?
295.8k
that is the procedure above
How many atoms of hydrogen are there in 36 g of NH4?
Answer:
hope it helps you
Explanation:
please like and mark me brainlist
PLEASE HELPP!!!
PLEASE HELP!!!
Write the sentences in your copybook and draw a line through one of the words in
bold to complete each of these sentences about alkali metals correctly.
Alkali metals generally become more / less dense going down the group.
The melting and boiling points of alkali metals increase / decrease down the group.
The softness of alkali metals increases / decreases going down the group.
The speed with which alkali metals react with oxygen increases / decreases going
down the group.
Answer:
vahshahhsjajaiaoakkakakaaosos
