necesito que me ayuden a resolver lo de las imágenes por favor ... es urgente

Answer: 143.48 moles of copper will be produced.

Explanation:

We are given:

Number of particles of copper (I) sulfate = [tex]4.32\times 10^{25}[/tex]

According to the mole concept:

[tex]6.022\times 10^{23}[/tex] number of particles is contained in 1 mole of a compound

So, [tex]4.32\times 10^{25}[/tex] number of particles will be contained in = [tex]\frac{1}{6.022\times 10^{23}}\times 4.32\times 10^{25}=71.74mol[/tex] of copper (I) sulfate

The given chemical equation follows:

[tex]Fe+Cu_2SO_4\rightarrow FeSO_4+2Cu[/tex]

By the stoichiometry of the reaction:

If 1 mole of copper (I) sulfate produces 2 moles of Cu

So, 71.74 moles of copper (I) sulfate will produce = [tex]\frac{2}{1}\times 71.74=143.48mol[/tex] of Cu

Hence, 143.48 moles of copper will be produced.

Answer:

-2,802.960 kJ

Explanation:

The dimensional equation of the given quantities is presented as follows;

(6 mol) × (-393.5 kJ/mol) + (6 mol) × (-285.83 kJ/mol) - (1 mol) × (-1,273.02 kJ/mol) = ? kJ

The equation, can be written as follows;

[tex]\left (6 \times (-393.5) \, mol \times \dfrac{kJ}{mol} \right ) + \left(6 \times (-285.83) \, mol \times \dfrac{kJ}{mol} \right) - \left (1 \times (-1,273.02) \, mol \times \dfrac{kJ}{mol} \right) = ?[/tex]We note that [tex]mol \times \dfrac{kJ}{mol} \right) = kJ[/tex], therefore, the above equation becomes;

[tex]\left (6 \times (-393.5) \ kJ\right ) + \left(6 \times (-285.83) \ kJ \right) - \left (1 \, \times (-1,273.02) \ kJ \right) = -2,802.960 kJ[/tex]

Answer:

C. ((6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol)

Explanation:

Got it right on edge.
: the one after is -2803.

Answer:

The magnetic field of an atom, say H (one electron revolving around a proton) is composed of two separate contributions: an orbital magnetic moment and a spin magnetic moment. We get magnetic moments because of electromagnetic induction associated with each type of electron motion. The electron revolving around the proton with a certain angular momentum is related to the associated orbital magnetic moment (and, yes, we model it as a wire loop with current expressed in terms of the orbital velocity). This can be calculated using elementary mechanics. The spin magnetic moment is a little trickier because it is caused by the intrinsic spin of the electron which is a quantum phenomenon; therefore, this spin magnetic moment can only be calculated using quantum mechanics. In the end, we get a certain net magnetic moment associated with this motion of the electron in an atom. It is important to notice that this atom acts as a magnetic dipole (remember, as of yet, magnetic monopoles don't exist!).

If we take a bulk magnet like you might have on your fridge, it would be composed of atoms. Each atom operates as a magnetic dipole, but due to internal atomic structures, the atoms actually align themselves into separate magnetic domains, each with a net magnetic moment (caused my individually adding up those atomic dipole moments). In a common magnet (ferromagnet), these domains all point the same direction and stay that way, creating a permanent bulk magnetic dipole.

So in a way, there is no difference between the magnetic field of an atom and that of a magnet because one is simply a sum of the other, making both magnetic dipoles. Of course, here we see that there's nothing that fundamental about the magnetic force. In reality, the magnetic force is a relativistic effect caused by the movement of a charged particle, making electricity (i.e. charge) the underlying property at work here. Electromagnetic induction is really a shortcut to understand the magnetic force without worrying about relativistic mechanics. If we were to discover magnetic monopoles (i.e. "magnetic" charge), this would re-write a lot that we know about electromagnetism because we couldn't label all magnetic forces as by-products of moving electric charge

Answer:

0.241 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

HBr + NaOH —> NaBr + H₂O

From the balanced equation above,

The mole ratio of acid, HBr (nₐ) = 1

The mole ratio of base, NaOH (n₆) = 1

Finally, we shall determine the concentration of the NaOH solution. This can be obtained as follow:

Volume of base, NaOH (V₆) = 20 mL

Volume of acid, HBr (Vₐ) = 24.1 mL

Concentration of acid, HBr (Cₐ) = 0.2 M

Concentration of base, NaOH (C₆) =?

CₐVₐ / C₆V₆ = nₐ/n₆

0.2 × 24.1 / C₆ × 20 = 1/1

4.82 / C₆ × 20 = 1

Cross multiply

C₆ × 20 = 4.82

Divide both side by 20

C₆ = 4.82 / 20

C₆ = 0.241 M

Therefore, the concentration of the NaOH solution is 0.241 M

Answer:

true

false

false

true

false

true

true

false

false

true

true

Polywool fibre is synthetic.

⇒b. Synthetic

Hope It Helps You ✌️

Answer:

[tex]\large{\underbrace{\underline{\fcolorbox{White}{pink}{\bf{b.synthetic }}}}}

[/tex]

A reaction in which reduction and oxidation take place simultaneously known as a redox reaction.

Answer:

179.5 feet

Explanation:

54.718 m converted to 179.5 feet.

Answer: Revoke the driver's license for at least 12 months

Explanation:

Chemical tests are used in order to measure the amount of drugs or alcohol that is in the body of a person when the person was arrested. To do this, samples of the urine or blood of the person can be taken and the result will be used to know if the person was driving under the influence of alcohol or not.

If the person refuse a legal chemical test issued by a law enforcement officer, the Division of Motor Vehicles is required to revoke the the driver's license of the person for at least 12 months.

Answer:

b is your answer...........

Answer:

the S.I unit

Explanation:

is the best unite

Answer:

a

Explanation:

I'm not completely sure tho veary sorry if it's wrong

Answer:

the answer is C

Explanation:

as the yeast feeds on sugar and yields the ATP per glucose molecule and Carbon dioxide

Explanation:

The easiest method to separating magnets is to slide them apart. When separating magnets keep in mind shear force. Magnets are measured on pull strength, so are up to five times easier to move if they are pushed apart instead of pulled apart. Small magnets slide relatively easily, even without spacers.

Firmly slide them away from each other and far enough apart so that they don't hop back together. Neodymium magnets are quite strong.

The properties of the magnet are:

Thus,  slide them away from each other and far enough apart so that they don't hop back together.

To learn more about magnets  click here:

https://brainly.com/question/13026686

Answer:

C

Explanation:

like charges repel each others so if they have the same charge they will move away from each other

Answer: A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.

Explanation:

When average temperature of Earth keeps on increasing for a longer period of time due to greenhouse gases, increased level of carbon dioxide and other gases etc then it is called global warming.

As humans use oxygen to sustain which is present in the air. So, when there will occur decrease in air quality that results from global warming then it means more illness or diseases will be there.

Hence, people will tend to die more often because of decrease in the air quality their health is getting affected.

Thus, we can conclude that a decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.

Answer:

A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.

Explanation:

Hope this helps.

Answer:

Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

hope it helps

Sulfur dioxide and nitrogen oxides can contribute to acid precipitation.

A pollutant is a chemical or biological substance which harms water, air, or land quality.

Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

Learn more  about the pollutants here:

https://brainly.com/question/16101020

#SPJ2

Answer:

Diatomic molecules contain two atoms that are chemically bonded. If the two atoms are identical, as in, for example, the oxygen molecule (O2), they compose a homonuclear diatomic molecule, while if the atoms are different, as in the carbon monoxide molecule (CO), they make up…

Explanation:

yei hoo arko aaxaina ...

Answer: The molecular weight of the dibasic acid is 89.6 g/mol

Explanation:

Normality is defined as the amount of solute expressed in the number of gram equivalents present per liter of solution. The units of normality are eq/L. The formula used to calculate normality:

[tex]\text{Normality}=\frac{\text{Given mass of solute}\times 1000}{\text{Equivalent mass of solute}\times \text{Volume of solution (mL)}}[/tex]      ....(1)

We are given:

Normality of solution = [tex]\frac{1}{20}=0.05N[/tex]

Given mass of solute = 0.56 g

Volume of solution = 250 mL

Putting values in equation 1, we get:

[tex]0.05=\frac{0.56\times 1000}{\text{Equivalent mass of solute}\times 250}\\\\\text{Equivalent mass of solute}=\frac{0.56\times 1000}{0.05\times 250}=44.8g/eq[/tex]

Equivalent weight of an acid is calculated by using the equation:

[tex]\text{Equivalent weight}=\frac{\text{Molar mass}}{\text{Basicity}}[/tex]   .....(2)

Equivalent weight of acid = 44.8 g/eq

Basicity of an acid = 2 eq/mol

Putting values in equation 2, we get:

[tex]44.8g/eq=\frac{\text{Molar mass}}{2eq/mol}\\\\\text{Molar mass}=(44.8g/eq\times 2eq/mol)=89.6g/mol[/tex]

Hence, the molecular weight of the dibasic acid is 89.6 g/mol

Answer:

-0.75 , 1.25

Explanation:

Number of electrons present in valence shell,

P-O = 5 + 8 = 13

Number of electrons involved in bond formation,

13 - 3 = 10

Number of bonds in PO3 - 4ion = 102

Average P-O bond = 1.25

Average formal charge on Oxygen atom is -0.75

Answer:

1) The percentage of oxygen in dry air is _______

C. 21

2) The composition of the Earth’s earliest atmosphere was different to that of the present atmosphere. Which of these gases was present in large amounts in the Earth’s earliest atmosphere?

B. CARBON DIOXIDE

Hope it helps

have a nice day

Answer: The percentage of oxygen in dry air is .  21

Explanation:  Ammonia gases was present in large amounts  in the easth7s earliest atmosphere

Hope it will help you

Answer:

Los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).

Explanation:

El cobre posee dos estados de oxidación más comunes, los cuales son +1 y +2.

En contacto con aire el cobre se puede oxidar para dar lugar al óxido cuproso u óxido de cobre (I):

4Cu + O₂ → 2Cu₂O

Dicha oxidación también puede dar lugar a la formación del óxido cúprico u óxido de cobre (II):

2Cu + O₂ → 2CuO

La formación del óxido cúprico se favorece a temperaturas mayores a la del ambiente (por encima de los 300 °C).

Por lo tanto, los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).  

Espero que te sea de utlidad!

Answer:

the process by which green plants and some other organisms use sunlight to synthesize nutrients from carbon dioxide and water. Photosynthesis in plants generally involves the green pigment chlorophyll and generates oxygen as a by-product.

Answer:

the process by which green plants and some other organisms use sunlight to synthesize nutrients from carbon dioxide and water. Photosynthesis in plants generally involves the green pigment chlorophyll and generates oxygen as a by-product.

Answer:

b

Explanation:

Molecular formula of Decanoic Acid is  C₁₀H₂₀O₂ therefore Option A is the right answer.

Decanoic Acid is a C10 , straight chain , saturated fatty acid . Its general formula is C₁₀H₂₀O₂ .

In the first option we can see a straight chain , saturated fatty acid and the molecular formula is also same as decanoic acid .

In second option the molecular formula is C₉H₁₈O₂ which is not same as Decanoic Acid.

Hence option A is the right answer.

To know more about Decanoic Acid;

https://brainly.com/question/8729762

#SPJ2

Answer:

From this solution, you can do the a number question answer.