Answer: so in this question are reactants are calcium hydroxide and ammonium chloride
Explanation: first of all know that a salt would be formed so here the salts present are calcium and chloride so they would react to form the salt calcium chloride, then since ammonium ions are present ammonia gas would be formed then, hydroxide ions (OH) are also present so water would be formed so our final products would be calcium chloride , ammonia and water .
WORD EQUATION
calcium hydroxide+ ammonium chloride⇒ calcium chloride+ ammonia+ water
CHEMICAL EQUATION
CA(OH)2+2NH4CL⇒ CACL2+2NH3+2H2O
explain the importance of measurement in our daily life
please answer fast............
It's O2 which is oxygen....
Answer:
c. CO2 is the answer.Explanation:
Hope this helps you. Please mark as brainliest. Good Luck^_^
If oxygen causes fire to burn, why didn't the world explode when fire burns at a particular place...since oxygen is everywhere...? Explain...
Answer:
Oxygen does not burn. It is not flammable, but it is an oxidizer.
Explanation
I think you are misunderstanding what is meant by "fire burns up air". Fire does use oxygen when it burns. But it also produces carbon dioxide. An oxygen molecule has two oxygen atoms in it. Fires use this to produce carbon dioxide by adding a single carbon atom from the fire’s fuel (wood, for instance).
hope it'll help:)
What is the solubility of salt at 60°C if 2 gm of the salt is left behind when 7 gm of its saturated solution at that temperature dried?
a) 20
b) 40
c) 60
d) 80
40
Explanation:
because its Saturated
Which star has the highest surface temperature
A. blue star
B. yellow star
C. white star
D. red star
Answer:
The blue star is the hottest star.
Explanation:
Red stars are cooler than the sun, with surface temperatures of 3,500 K for a bright red star and 2,500 K for a dark red star. The hottest stars are blue, with their surface temperatures falling anywhere between 10,000 K and 50,000 K
Convert 16.7 inches to yards (there are 3 feet in a yard)
Using the method of dimensional analysis
Answer:
Explanation:
16.7 inches [1 foot / 12 inches] [1 yard / 3 feet] Notice how the units cancel each other out. You do have numbers in the denominator. What you get, looks like this
16.7
------
(12 * 3)
16.7 / 36
0.4639 yrds
Read ""the Ozone Hole"" and answer the question below list at least three scientific disciplines related to chemistry mentioned or alluded to in the article
Answer:
Any 3 of the following:
atmospheric science
environmental science
climate science
biology
astronomy
human physiology and medicine
Explanation:
Got it right on edge 23
Again I am here with privious question
I have post this question last time also but no one answers. So can you solve this. I need it.
I will support your account
Answer:
The answer is below
Explanation:
1. Fractional Distillation
2. Simple Distillation
3. Filtration
4. Steam distillation or lemon grass oil extraction
Circle the correct term to complete the sentence: When you dilute a solution, the resulting solution has a concentration that is (increased/decreased) and the volume is (increased/decreased).
Answer:. The concentration is decreased and the volume is increased.
Explanation: Diluting a solution means adding more solvent, usually water, meaning that there is less solute in any sample of the solution. Adding more solvent means that the volume of the solution will increase.
hii pls help me to balance the equation thanksss
Explanation:
2KCLO3 (s) = 2KCl (s) + 3O2 (g)
How many moles are in 68 liters of H2S gas at STP? :}
Answe:
Explanation:
số mol của H2S là : 68/22.4=3.03 nha
If you start with 4.5 moles of aluminum and 6.5 moles of copper chloride to make aluminum chloride and copper, what is the limiting reagent?
2Al + 3CuCl -> 2AlCl3 + 3Cu
Answer:
The limiting reagent is CuCl
Explanation:
The initial number of moles of aluminum, Al = 4.5 moles
The number of moles of copper, Cu = 6.5 moles
The given chemical reaction is presented as follows;
2Al + 3CuCl → 2AlCl₃ + 3Cu
Therefore, we have, 2 moles of aluminum combine with 3 moles of CuCl produces 2 moles of AlCl₃ and 3 moles of Cu
1 mole of Al will combine with (3/2) moles of CuCl,
Therefore, 4.5 moles of Al will combine with (4.5 × (3/2) = 6.75) 6.75 moles of CuCl
Given that the number of moles of CuCl present is only 6.5 moles which is less than the 6.75 moles required to combine with the 4.5 moles, the 6.5 moles of CuCl limits the amount of AlCl₃ and Cu produced, and therefore the CuCl is the limiting reagent.
I need help with question 2
Answer:
here's the answer to your question
Do plants need soil to grow
Answer:
Not all plants do need soil to grow
Explanation:
Not all plants need soil to grow. Some just do better in soil compared to other growing mediums. What plants need are minerals and nutrients, such as nitrogen, potassium, and phosphorous. Soil is an effective way of delivering those nutrients cost-effectively. You can also use alternative delivery systems like hydroponics, aeroponics, and aquaponics to achieve the desired effect. However, these are only suitable for growing shallow-rooted plants. Plants with deep roots will always need soil, as will larger plants with spreading roots.
Potassium impart purple colour but beryllium do not impart any colour to the flame.Why?
Answer:
The electrons in beryllium and magnesium are too strongly bound to get excited by flame. Hence, these elements do not impart any color.How many atoms are in 1g of Hg
Answer:
7.5275 x 10^21
Explanation:
Answer:
[tex]\boxed {\boxed {\sf 3 \times 10^{21} \ atoms \ Hg}}[/tex]
Explanation:
We are asked to find how many atoms are in 1 gram of mercury.
1. Convert Grams to MolesFirst, we convert grams to moles. We use the molar mass or the mass of 1 mole of a substance. These values are equivalent to the atomic masses on the Periodic Table, but the units are grams per mole instead of atomic mass units.
Look up mercury's molar mass.
Hg: 200.59 g/molWe convert using dimensional analysis, so we create a ratio using the molar mass.
[tex]\frac { 200.59 \ g \ Hg}{ 1 \ mol \ Hg}[/tex]
We are converting 1 gram of mercury to moles, so we multiply the ratio by this value.
[tex]1 \ g \ Hg *\frac { 200.59 \ g \ Hg}{ 1 \ mol \ Hg}[/tex]
Flip the ratio so the units of grams of mercury cancel out.
[tex]1 \ g \ Hg *\frac{ 1 \ mol \ Hg} { 200.59 \ g \ Hg}[/tex]
[tex]1 *\frac{ 1 \ mol \ Hg} { 200.59}[/tex]
[tex]\frac{ 1} { 200.59} \ mol \ Hg[/tex]
[tex]0.004985293385 \ mol \ Hg[/tex]
2. Convert Moles to AtomsNext, we convert moles to atoms. We use Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units) in 1 mole of a substance. In this case, the particles are atoms of mercury.
We will use dimensional analysis and set up another ratio.
[tex]\frac {6.022 \times 10^{23} \ atoms \ Hg}{ 1 \ mol \ Hg}[/tex]
Multiply by the number of moles we calculated.
[tex]0.004985293385 \ mol \ Hg * \frac {6.022 \times 10^{23} \ atoms \ Hg}{ 1 \ mol \ Hg}[/tex]
The units of moles of mercury cancel.
[tex]0.004985293385 * \frac {6.022 \times 10^{23} \ atoms \ Hg}{ 1 }[/tex]
[tex]3.00214368 \times 10^{21} \ atoms \ Hg[/tex]
3. RoundThe original measurement of grams has 1 significant figures, so our answer must have the same. For the number we calculated, that is the ones place. The 0 in the tenths place tells us to leave the 3 in the ones place.
[tex]3 \times 10^{21} \ atoms \ Hg[/tex]
There are approximately 3×10²¹ atoms of mercury in 1 gram of mercury.
N2 H4 (1) + O2
N2 (a) + 2H20()
PLEASE HELP ASAP!
How many grams of hydrazine (N2Ha) are needed to produce 52,4 g
water?
a 31.0
O b
b. 186
c. 32.0
d. 46.5
Answer:
d. 46.5 g
Explanation:
First, you need to start with a properly balanced equation:
N₂H₄(l) + 3O₂(g) -> 2NO₂(g) + 2H₂O(l)
Then, find the moles of water produced:
2H = 2.01568 amu
O = 15.999 amu
________________
18.01468 amu
52.4 g ÷ 18.01468 amu = 2.9087 moles
The mole ratio in our balanced formula between N₂H₄ : H₂O is 1 : 2, so divide moles of H₂O by 2 to get moles of N₂H₄
2.9087 moles ÷ 2 = 1.45435 moles of N₂H₄
Then, calculate the atomic mass of N₂H₄:
2N = 28.0134 amu
4H = 4.03136 amu
________________
32.04476 amu
Finally, calculate the mass in grams of N₂H₄:
1.45435 moles • 32.04476 amu = 46.604 g
PLZ HELP There are two main ways that organisms reproduce, or make more Individuals of their own kind. Which of the following is true of these two types of reproduction?
A. In one way, two parents are involved. In the other, there is only one parent
B. In reproduction that involves only one parent, the offspring are different from the parent. In reproduction that involves two parents, the offspring receive exact copies of the parents' DNA.
C. In both ways, offspring share characteristics with their parents but are not exactly the same. O
D. In both ways, all offspring are identical to each other but maji different from their parents.
Answer:
A
Explanation:
Two parents are involved in Sexual Reproduction but only one is involved in Asexual Reproduction.
which option correctly shows the bond angle of a linear molecule?
a. 109.5 degrees
b. 90 degrees
c. 120 degrees
d. 180 degrees
Taking into account the definition of molecular geometry, the correct option is option d.: the bond angle of a linear molecule is 180 degrees.
In first place, molecular geometry or molecular structure is the spatial distribution of atoms around a central atom. Atoms represent regions where there is a high electron density, and are therefore considered electronic groups, regardless of the bonds they form.
That is, molecular geometry is the three-dimensional arrangement of the atoms that make up a molecule.
The molecular geometry of an element characterizes some of its physical or chemical properties, such as boiling point, viscosity, and density.
Linear molecules are molecules of the AB₂ type in which the central atom does not have lone pairs. To avoid repulsions between the binding pairs, arrange the B groups as far apart as possible. For that they must oppose each other 180 °.
In summary, linear molecular geometry describes the arrangement of different atoms with 180º bonds.
So, the correct option is option d.: the bond angle of a linear molecule is 180 degrees.
Learn more about molecular geometry with this example:
https://brainly.com/question/11298860?referrer=searchResultshttps://brainly.com/question/14203216?referrer=searchResultshttps://brainly.com/question/9965422?referrer=searchResultsdivide rs 120 I three parts which are in THE ratio of 1:2:3.
Answer:
20,40,60
Explanation:
Let the three parts be 1x, 2x and 3x
The the sum of three parts will be 1x+2x+3x = 120
6x=120
x=120/6
x=20
1x= 20x1=20
2x= 20x2=40
3x= 20x3=60
So 120 is divided in three parts that is 20,40,60
Answer From Gauth Math
what is the product of SO2+H2O.
Answer:
H2O + SO2 → H2SO3
Explanation:
H2O + SO2 → H2SO3
Answer:
l think this is the answer .
what is precipitating ???
anyone please tell me how to delete an I'd
Explanation:
Desposition of solid matter in a solution
A sample of a gas is kept at constant pressure while
its temperature is cooled from 100°C to 0°C. What
was its original volume if its final volume is 1.83 L?
Explanation:
here's the answer to your question
Which element would have the lowest electronegativity? (1 point)
O an element with a small number of valence electrons and a small atomic radius
O an element with a small number of valence electrons and a large atomic radius
an element with a large number of valence electrons and a large atomic radius
Dan element with a large number of valence electrons and a small atomic radius
The element that will have the lowest electronegativity is an element with a small number of valence electrons and a large atomic radius.
Electronegativity of an element is the ability or power of that element in a molecule to attract electrons to its Valence electrons. The following are the properties of electronegativity:
It increases across a period from left to right of the periodic table,It decreases down the periodic table groupsGroup 1 elements are the least (lowest) electronegative elements. These elements have the lowest valence electrons with a large atomic radius. Group 7 elements are the most electronegative elements.Atomic radius of elements increase down a group because of a progressive increase in the number of shells occupied by electrons which increases the size. But it decreases across a period because electrons are accommodated within the same shell leading to greater attraction by the protons in the nucleus.
Learn more about electronegativity of elements here:
https://brainly.com/question/20348681
Answer: Its B the guy above me is correct
plz help me with this one question
I will give u like,rate you 5 star and also follow u back.ppz help me
Answer:
Cl2(g) + H2O <–> HOCl + H+ + Cl-
Chlorine is the most popular way for the sterilization of water.
Cl2 + H2O → HOCl + HCl
what is local unit?
.
Answer:
Explanation:
Local unit means a county, city, village, or township.
What’s the name of this compound?
what apparatus is used to measure small volume of liquid
Answer:
give me brainliest pls
Explanation:
Volumetric flasks
Volumetric labware is for measuring liquids with precision. Volumetric flasks, burettes, and pipettes made for measuring small amounts of liquid are the most accurate, with tolerances of less than ±0.02.
Answer:
A pipette is a laboratory instrument used to measure out or transfer small quantities of liquid, in volumes of milliliters (mL), microliters (μL).
It is often possible to change a hydrate into an anhydrous compound by heating it to drive off the water (dehydration). A 43.19 gram sample of a hydrate of MgBr2 was heated thoroughly in a porcelain crucible, until its weight remained constant. After heating, 27.21 grams of the anhydrous compound remained. What is the formula of the hydrate?
Answer:
[tex]\rm MgBr_2 \cdot 6\, H_2O[/tex].
Explanation:
Let [tex]x[/tex] denote the number of [tex]\rm H_{2}O[/tex] formula units for every [tex]\rm MgCl_{2}[/tex] formula unit. The formula of the hydrate would be [tex]{\rm MgBr_2} \cdot x\, {\rm H_2O}[/tex].
Look up the relative atomic mass of each element on a modern periodic table:
[tex]\rm Mg[/tex]: [tex]24.305[/tex].[tex]\rm Br[/tex]: [tex]79.904[/tex].[tex]\rm H[/tex]: [tex]1.008[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].Formula mass:
[tex]\begin{aligned}M({\rm MgBr_{2}}) &= 24.305 + 2 \times 79.904 \\ &= 184.113\; \rm g\cdot mol^{-1}\end{aligned}[/tex].
[tex]\begin{aligned}M({\rm H_{2}O}) &= 2 \times 1.008 + 15.999 \\ &= 18.015\; \rm g\cdot mol^{-1}\end{aligned}[/tex].
The anhydrous compound would be [tex]\rm MgBr_{2}[/tex]. There was [tex]27.21\; \rm g[/tex] of this compound. Calculate the number of moles of formula units in that much of this compound:
[tex]\begin{aligned}n({\rm MgBr_{2}}) &= \frac{m({\rm MgBr_{2}})}{M({\rm MgBr_{2}})} \\ &= \frac{27.21\; \rm g}{184.113\; \rm g \cdot mol^{-1}} \\ &\approx 0.1478\; \rm mol\end{aligned}[/tex].
During heating, [tex]43.19\; \rm g - 27.21\; \rm g = 15.98\; \rm g[/tex] of water [tex]\rm H_{2}O[/tex] escaped from the hydrate. Calculate the number of formula units in that [tex]15.98\; \rm g[/tex] of [tex]\rm H_{2}O\![/tex]:
[tex]\begin{aligned}n({\rm H_{2}O}) &= \frac{m({\rm H_{2}O})}{M({\rm H_{2}O})} \\ &=\frac{43.19\; \rm g - 27.21\; \rm g}{18.015\; \rm g \cdot mol^{-1}} \\&= \frac{15.98\; \rm g}{18.015\; \rm g \cdot mol^{-1}} \\ &\approx 0.887\; \rm mol\end{aligned}[/tex].
In other words, approximately [tex]0.1478\; \rm mol[/tex] of [tex]\rm MgBr_{2}[/tex] formula units (and hence the same number of moles of [tex]{\rm MgBr_2} \cdot x\, {\rm H_2O}[/tex] formula units) contain approximately [tex]0.887\; \rm mol[/tex] of [tex]\rm H_{2}O[/tex] formula units. Calculate the ratio between the two:
[tex]\begin{aligned}x &= \frac{n({\rm H_{2}O})}{n({\rm MgBr_2})} \\ &\approx \frac{0.1478\; \rm mol}{0.887\; \rm mol} \approx 6\end{aligned}[/tex].
Hence, the formula of the hydrate would be [tex]\rm MgBr_2 \cdot 6\, H_2O[/tex].
Convert the following moles to grams :)
1. 2.4 moles sulfur
2. 1.5 moles BeI2
3. 7.5 moles C6H12O6
Answer:
3
Explanation:
sky is high and I am good.