Nitrogen Fixation because It's the process by which atmospheric nitrogen is converted either by a natural or an industrial means to form of nitrogen such as ammonia.
please i need help ……
Answer:
H2
Explanation:
(l) means liquid
(s) means solid
(g) means gaseous
I hope this helped [:
What is the function of the rough
ER?
A. build proteins
B. modify and repackage proteins
C. contains enzymes
A. build proteins
Explanation:
The endoplasmic reticulum can either be smooth or rough, and in general its function is to produce proteins for the rest of the cell to function. The rough endoplasmic reticulum has on it ribosomes, which are small, round organelles whose function it is to make those proteins
Silicon is in the same group of the Periodic Table as carbon. The compound
formed between silicon and hydrogen is likely to have the formula
SiHz
SiH
SizH:
SizHs
Please hurry
Answer:
SiH
Explanation:
The symbol for Silicon is Si, and the symbol for Hydrogen is H. There is no need for extra characters in the name.
There are on average 43 g of sugar and 355 mL can of soda please calculate the molarity of sugar in the can of soda the molar mass of sugar is 342.2 g/mol
Explanation:
Given :
Amount of solute - sucrose (C12H22O11) = 41 g
Amount of solvent -soda = 355-mL
Molarity of the solution with respect to sucrose= ?
Molarity(M) is a unit of concentration measuring the number of moles of a solute per liter of solution. The SI unit of molarity is mol/L.
Formula to find the molarity of solution :
Molarity =
Amount of solvent is given in mL, let’s convert to L :
1 L = 1000 mL
Therefore, 355 mL in L will be :
= 0.355 L
We have the amount of solute in g, let’s calculate the number of moles first :
Number of moles (n) =
Molar mass of C12H22O11 = 342.29 g/mol.
Therefore, n =
= 0.119 moles.
heyoo I need help pleaseeeeee
c) Current cannot flow
Reason: Because the switch is not closed.
Answer:
current can't flow
Explanation:
by the way of explanation it is open circuit in which the current flow whereas in closed circuit the current flow.
if you like my answer please mark as brainlist.
it will be too much help for me.
Difference between
Atom and molecule
Answer:
Atoms are single neutral particles. Molecules are neutral particles made of two or more atoms bonded together.
Explanation:
its on safari ??????????
List two possible steps where impurities may be gained, which would appear to be an increase in copper
yield (why you may get more than 100% of the copper back at the end). Be specific about the steps and
how they might add impurities.
Answer:
i) During washing
ii) During Measurement
Explanation:
The two possible steps are :
i) During washing : during the washing method the residue may be not completely dried out and this residue ( water) will add up to the final product ( copper yield ) and this kind of error is called human error.
ii) During measurement : If the weighing instrument is faulty there might be addition in value of the final copper yield which will see the final yield value > 100% . this error occurs when the initial value and final value is been weighed
The temperature of a sample of liquid water changes from 50°C to 30°C. Which statement best explains the change
that must happen at the molecular level?
The molecules move more quickly and their average kinetic energy increases
The molecules move more bowly and their average kinetic energy decreases
The molecules move more quickly and their average kinetic energy decreases
The molecules move more slowly and their average kinetic energy increases.
Answer:
The molecules move slower than the temp of 50°c and their average kinetic energy decreases.
Explanation:
kinetic energy cannot increase as temperature is reduced. molecules will still move with reduced motion.
PCl5 <-> PCl3 + Cl2
PCl5 decomposes into PCl3 and Cl2 according to the equation above. A pure sample of Pcl5 is placed in a rigid, evacuated 1.00 L container. The initial pressure of the PCl5 is 1.00 atm. The temperature is held constant until the PCl5 reaches equilibrium with its decomposition products. The figures below shows the initial and equilibrium conditions of the system.
As the reaction progresses toward equilibrium, the rate of the forward reaction
A) increases until it becomes the same as the reverse reaction rate at equilibrium
B) stays constant before and after equilibrium is reached
C) decreases to become a constant nonzero rate at equilibrium
D) decreases to become zero at equilibrium
Answer:
PCl5 <-> PCl3 + Cl2
PCl5 decomposes into PCl3 and Cl2 according to the equation above. A pure sample of Pcl5 is placed in a rigid, evacuated 1.00 L container. The initial pressure of the PCl5 is 1.00 atm. The temperature is held constant until the PCl5 reaches equilibrium with its decomposition products. The figures below show the initial and equilibrium conditions of the system.
As the reaction progresses toward equilibrium, the rate of the forward reaction
A) increases until it becomes the same as the reverse reaction rate at equilibrium
B) stays constant before and after equilibrium is reached
C) decreases to become a constant nonzero rate at equilibrium
D) decreases to become zero at equilibrium
Explanation:
At equilibrium, both forward and backward reactions take place with constant speed.
The reaction will never cease.
Due to this reason chemical equilibrium is called dynamic in nature.
At equilibrium:
the rate of forward reaction = rate of backward reaction
As the reaction progresses toward equilibrium, the rate of the forward reaction decreases to become a constant nonzero rate at equilibrium.
Answer is option C).
When a system is in a state of chemical equilibrium, neither the reactant concentration nor the product concentration changes over time, nor does the system exhibit any further changes in its attributes. Here the correct option is C.
The system reaches a condition of chemical equilibrium when the rate of the forward reaction equals the rate of the reverse reaction. The system is considered to be in a state of dynamic equilibrium when the concentrations of the reactants and products do not change further as a result of the equal rates of the forward and reverse processes.
Equilibrium is impacted by a number of variables, including temperature, pressure, and the system's concentration. Here at equilibrium the rate of the forward reaction decreases to become a constant nonzero rate at equilibrium.
Thus the correct option is C.
To know more about chemical equilibrium, visit;
https://brainly.com/question/4289021
#SPJ6
An aqueous sodium acetate, NaC2H3O2 , solution is made by dissolving 0.395 mol NaC2H3O2 in 0.505 kg of water. Calculate the molality of the solution.
Answer: The molality of [tex]NaC_2H_3O_2[/tex] solution is 0.782 m
Explanation:
Molality is defined as the amount of solute expressed in the number of moles present per kilogram of solvent. The units of molarity are mol/kg. The formula used to calculate molality:
[tex]\text{Molality of solution}=\frac{\text{Moles of solute}}{\text{Mass of solvent (in kg)}}[/tex] .....(1)
Given values:
Moles of [tex]NaC_2H_3O_2[/tex] = 0.395 mol
Mass of solvent (water) = 0.505 kg
Putting values in equation 1, we get:
[tex]\text{Molality of }NaC_2H_3O_2=\frac{0.395mol}{0.505kg}\\\\\text{Molality of }NaC_2H_3O_2=0.782m[/tex]
Hence, the molality of [tex]NaC_2H_3O_2[/tex] solution is 0.782 m
What point A on the phase diagram called?
liquid
(374°C/218 atm)
A
solid
pressure (atm)
gas
temperature (°C)
OA.
the melting point
OB.
the boiling point
Ос.
the freezing point
OD
the critical point
OE.
the triple point
Answer:
D) the critical point
Explanation:
Point A is the critical point in phase diagram. This is the highest temperature and pressure at which a pure material can exist in vapor/liquid equilibrium. Pretty cool!
what are some ways you would expect people and things to be affected by an earthquake that moved the ground that much?
Answer:
Some of the common impacts of earthquakes include structural damage to buildings, fires, damage to bridges and highways, initiation of slope failures, liquefaction, and tsunami.
What does a low number on the pH scale say about a solution?
A. The solution is neutral.
B. The solution is a base.
C. The solution is changing.
D. The solution is an acid.
Answer:
d. the solution is a acid
Answer:D The solution is an acid
Explanation:The lower the pH of a substance the stronger the acidic level.
CHEMISTRY HW... DUE in 2.5 hours! HELP!!!!
Answer:
The final temperature aluminium-water system is 24° C
Explanation:
Heat energy, H = mcθ
Where m is mass of substance, c is specific heat capacity, θ is temperature difference
Using the principle, Heat lost = Heat gained
Let the final temperature of the aluminium-water system be Tfinal
Heat lost by aluminium, H₁ = -m₁c₁(Tfinal - 40)
Heat gained by water, H₂ = m₂c₂(Tfinal -21)
Heat lost by aluminium, H = -[30 × 0.21 × (Tfinal - 40)]
H₁ = -6.3Tfinal + 252
Heat gained by water, H₂ = 50 × 1.0 × (Tfinal - 21)
H₂ = 5Tfinal - 21
Equating H₁ and H₂
-6.3Tfinal + 252 = 5 Tfinal - 21
5Tfinal + 6.3Ffinal = 252 + 21
11.3 Tfinal = 273
Tfinal = 273/11.3
Tfinal = 24° C
Therefore, the final temperature aluminium-water system is 24° C
What is the predicted change in the boiling point of water when 2.10 g of
barium chloride (BaCl2) is dissolved in 5.50 kg of water?
The addition of any non-volatile solutes will elevate the boiling point of the solution. The change in boiling point of water by the addition of 2.10 of barium chloride is 0.0028 ° C. Hence, option A is correct.
What is boiling point?Boiling point of a substance is the temperature at which it changes from liquid to vapour where the two states are in equilibrium. Boiling point of a substance depends on the bond type, molecular mass and purity of it.
The change or elevation of boiling point of a solution can be determined from its molality m and elevation constant Kb and the Van't Hoff factor i as follows:
ΔT = i Kb m.
Molality of the solution is the no.of moles divided by the mass of solvent in kilogram. Given the mass of barium chloride is 2.10 g and its molar mass is 208.23 g . The no.of moles of solute is 2.10/208.23 g = 0.0100.
Molality of the solution can be calculated as follows:
Molality m = 0.0100 / 5.50 Kg
= 0.0018 mol/kg.
Now, the ΔT s calculated from these values. Provided Kb of water is 0.51 ° C /mol and i = 3.
ΔT = 0.0018 mol/kg × 0.51 × 3
= 0.0028 ° C.
Therefore, water will boil at 100.0028 ° C. Hence, option A is correct.
To find more about boiling point, refer the link below:
https://brainly.com/question/28203474
#SPJ1
(20 points and excuse any offensive or seemingly bad language in this question) Budding and regeneration are two types of asexual reproduction.
Answer: true
Asexual reproduction is the process by which an organism is produced from a single parent cell. There are four major forms of asexual reproduction - budding, binary fission, regeneration and parthenogenesis. ... Regeneration is a type of asexual reproduction in which the organism is capable of regrowing certain body parts.
Explanation:
id k what u r talking abt but hope this helps
Given that the acceleration due to gravity is 10N/Kg, calculate the weight of the
Mass (Show all you're working)
Answer:
Weight = 500 Newton
Explanation:
Given the following data;
Acceleration due to gravity = 10N/Kg
Weight can be defined as the force acting on a body or an object as a result of gravity.
Mathematically, the weight of an object is given by the formula;
[tex] Weight = mg [/tex]
Where;
m is the mass of the object.g is the acceleration due to gravity.Note: In order to calculate the weight of a mass, it's required that the mass of an object or body is given.
However, in this particular question it was omitted in error and as such i would assume a value.
Let mass, m = 50 kgSubstituting into the formula, we have;
[tex] Weight = 50 * 10 [/tex]
Weight = 500 Newton
If one of the reactants in a reaction us Na2O, what is known about the products?
Ok here's the deal
the answer is A: The products will contain exactly 2 Na atoms and 1 O atom.
Explanation:
thank me later space-ex kids
Identify which of the following statements about the isotopes of an element is correct.
A. They have the same electron configuration.
B. They have the same mass number.
C. They have the same numbers of protons and neutrons in the nucleus.
D. They have more protons than neutrons.
Answer:
A
Explanation:
because B is wrong as it doesn't have the same mass number. C is wrong as it has different number of neutrons. D is wrong as it has more neutrons than protons.
set goals and objectives for a company
Explanation:
Objectives and goals serve as a foundation for successful organizations since they establish the business's objective and aid in the identification of required measures. Goals are broad assertions of what you want to achieve, whereas goals are the precise stages or steps you need to take to get there.
Jason combines the two intermediate steps shown. 2 equations. First: upper N subscript 2 (g) plus upper O subscript 2 (g) right arrow 2 upper N upper O (g). Second: 2 upper N upper O (g) plus upper O subscript 2 (g) right arrow 2 upper N upper O subscript 2 (g). Which best describes what Jason should do with the oxygen molecules?
Answer:
The molecules of oxygen should be placed as reactants in the equation.
Explanation:
1: N₂ + O₂ → 2NO
2: 2NO + O₂ → 2NO₂
complete reaction:
N₂ + 2O₂ → 2NO₂
In both intermediate equations' oxygen is used as reactant because the end product is the product of the combination of nitrogen and oxygen. So in the complete or overall reaction, oxygen should also be placed as reactant.We can not place oxygen at the side of products neither we can cancel it because, products can only be obtained at the end of the reaction but according to the equations' oxygen is not the end product of the reaction. But the addition into the reaction (Eq. 2) to make the new product.
Also, we can not cancel it because to cancel out molecules of oxygen should be present at the both sides with same amount in the stoichiometric equation.
Hence, in a balanced chemical equation, oxygen should be written as a reactant by using the correct number of moles.
Standardization of a Borax solution (Na2B4O7). You are given a 1.044 M solution of H2SO4. It takes 2.63 mL of this H2SO4 to reach the end point. Knowing it takes 1 H2SO4 to neutralize 2 Na2B4O7, what was the concentration of this Borax solution?
The question is incomplete, the complete question is:
Standardization of a Borax solution (Na2B4O7). A student titrates a 20.00 mL sample of an aqueous borax solution with 1.044 M H2SO4. It takes 2.63 mL of acid to reach the equivalence point. Knowing it takes 1 H2SO4 to neutralize 2 Na2B4O7, what was the concentration of this Borax solution?
Answer: The concentration of borax solution is 0.069 M.
Explanation:
To calculate the concentration of borax solution, the formula used is:
[tex]n_1C_1V_1=n_2C_2V_2[/tex] ....(1)
where,
[tex]n_1, C_1\text{ and }V_1[/tex] are the n-factor, concentration and volume of sulfuric acid
[tex]n_2,C_2\text{ and }V_2[/tex] are the n-factor, concentration and volume of borax solution.
We are given:
[tex]n_1=1\\C_1=1.044M\\V_1=2.63mL\\n_2=2\\C_2=?M\\V_2=20mL[/tex]
Putting values in equation 1, we get:
[tex]1\times 1.044\times 2.63=2\times C_2\times 20\\\\C_2=\frac{1\times 1.044\times 2.63}{2\times 20}\\\\C_2=0.069M[/tex]
Hence, the concentration of borax solution is 0.069 M.
why elements with more than 20 protons always have a more neutrons than protons?
Answer:
Elements that have atomic numbers from 20 to 83 are heavy elements, therefore the ratio is different. The ratio is 1.5:1, the reason for this difference is because of the repulsive force between protons: the stronger the repulsion force, the more neutrons are needed to stabilize the nuclei.
Helppppp plz ASAP DON’T GUESS
Explanation:
A B C D isme koyi ans hain doond lo
tolong saya jawab yahhh
(i) Liang - liang stoma lebih banyak di bahagian bawah daun berbanding di bahagian atas permukaan daun.
(ii) Struktur X berfungsi mangawal pembukaan dan penutupan liang stoma
Which statement best describes wave-particle duality as it applies to electrons?
A. The electrons present in radio waves and microwaves act more like particles than waves.
B. Electrons are particles that emit waves of radiation when they move from higher energy levels to lower energy levels.
с.Electron clouds can be understood as clumps of particles held near one another by wave forces.
D.Electrons can be modeled as waves in some situations and as particles in other situations.
Answer:
D es pero que te ayude amigo
What determines the strength of a dipole dipole force?
Answer:
The more polar the molecules, the stronger the force. The more hydrogen in the molecule, the stronger the force.
Explanation:
I hope this helps and please ask if you need further help!
Which fundamental force(s) can act over very long distances?
A. Gravity and electrostatic force
B. Strong nuclear force and weak nuclear force
C. Gravity only
D. Electrostatic force and strong nuclear force
Answer:
C. Gravity only
Explanation:
PLZ HELP!!! QUESTIONS ARE BELOW!!! :D PLZ COMPLETELY ANSWER THE QUESTIONS WITH A GOOD ANSWER :)
Answer: sorry its lagging i hope this help fore 18.. =D
Explanation:
n,s is repeating the cycle of the inside
Answer/Explanation:
18, a,
I believe the n, and s represents North, South, or just the way the arrows are rotating repeatedly.
18, b,
The phenomenon re-occurring shows the alignment of magnetic dipoles with in a magnet, like inside. The arrows show a direction in the line with an external magnetic field in a way that it can produce its own magnetic fields that seem to travel from North to the South.
18, c,
Incorrect. Refrigerator magnets have multiple layers of magnification, they use opposite polarities to stay this way. If he puts the magnet sideways it may stick to the fridge
~ LadyBrain
Una muestra de 2,5000 (g) de piedra caliza, se disuelve y se precipita el Calcio como oxalato de Calcio (CaC2O4), este precipitado se calcina transformándose en Carbonato de Calcio (CaCO3). El peso de este compuesto es de 1,2093 (g). Calcular el % de Calcio en la muestra
Answer:
[tex]\%Ca=19.378\%[/tex]
Explanation:
¡Hola!
En este caso, basado en la información dada, es posible conocer la masa de calcio en carbonato de calcio, que de hecho es la misma en la muestra, al utilizar el siguiente esquema de cálculo:
[tex]m_{Ca}=1,2093gCaCO_3*\frac{1molCaCO_3}{100.1gCaCO_3}*\frac{1molCa}{1molCaCO_3}*\frac{40.1gCa}{1molCa}\\\\m_{Ca}=0.48444gCa[/tex]
Finalmente, calculamos el porcentaje requerido como sigue:
[tex]\% Ca=\frac{0.48444g}{2.5000g} *100\%\\\\\%Ca=19.378\%[/tex]
¡Saludos!
