In a market with a binding price floor, rationing among suppliers is accomplished through non-price mechanisms.
When a price floor is set above the equilibrium price in a market, it creates a situation where the price is legally required to be higher than what the market would naturally determine. This results in a surplus of supply, as the quantity supplied exceeds the quantity demanded at the higher price.
In such a scenario, rationing among suppliers, or determining which suppliers are able to sell their goods, is not achieved through the price mechanism. The price mechanism typically relies on the forces of supply and demand to determine the allocation of goods and resources. However, with a binding price floor, the market price is not allowed to adjust to equilibrium, so it cannot perform its usual function of rationing through price adjustments.
Instead, rationing among suppliers in a market with a binding price floor is accomplished through non-price mechanisms. These mechanisms can include methods such as government regulations, licenses, permits, or quotas that determine which suppliers are allowed to sell their goods and in what quantities. The government or relevant authorities may impose restrictions or criteria on suppliers to allocate the limited quantity demanded at the higher price.
In a market with a binding price floor, the rationing among suppliers is accomplished through non-price mechanisms. The price mechanism is unable to adjust due to the price floor, so alternative methods such as government regulations or quotas are used to determine which suppliers can sell their goods.
To know more about price visit:
https://brainly.com/question/28479908
#SPJ11
Q5. Suppose that an auto company owned entirely by German citizens opens a new factory in Johor. What sort of foreign investment would this represent? b. What would be the effect of this investment on Malaysia's GDP? Would the effect on Malaysia's GNP be larger or smaller?
Foreign investment is the investment of capital from a nation's residents into the foreign nation's economy, in this case, Malaysia. Suppose that an auto company wholly owned by German citizens opens a new factory in Johor.
This investment would be a form of foreign direct investment (FDI), which refers to the acquisition of assets or ownership of production facilities in a foreign country that is aimed at earning income and obtaining operational control over the foreign asset.
The investment would have a significant impact on Malaysia's gross domestic product (GDP), as it would increase economic activity in the region. Malaysia's GDP would be positively impacted as a result of the auto company's investment.
The net contribution of the auto company to the Malaysian economy's output would be the effect of this investment on Malaysia's GDP. The effect on Malaysia's Gross National Product (GNP) would be greater than on GDP because GNP measures the value of output produced by Malaysian citizens, regardless of their location, whereas GDP only measures output produced within Malaysia's borders.
Thus, if the new factory employs foreign workers, a portion of the factory's income would be sent back to Germany, which would increase GNP but not GDP.
To know more about Foreign visit :
https://brainly.com/question/31786888
#SPJ11
Shareholders' equity of Yiruna Toys Inc. (YTI), a public company, at December 31, 2020, was as follows: nalg Common shares, 1,350,000 shares outstanding Contributed surplus, stock option plan Retained earnings 34,600,000 270,000 OROS TE 12,450,00089 On January 2, 2021, YTI issued $20,000,000 of 6% convertible bonds. The bonds mature on December 31, 2035 (15 years total), and pay interest on June 30 and longe December 31 of each year. The total proceeds received on the sale of the bonds were $20,350,000, and the fair value of the bonds at this date was calculated as muten $19,613,010. Each $1,000 bond is convertible into 20 common shares at any time. 000,008,812 rsos re 3060 18 vuta 190 of YTI's employee stock option plan was initiated on January 1, 2019, and vested on noitspildo litoneo bonited December 31, 2021. The fair value of the options on the initiation date was $450,000. On December 31, 2020, YTI's management estimated that 90% of the options would vest. A total of 92% of the 100,000 options issued actually vested. Also on December 31, 2021, 60% of the vested options were exercised at an exercise price of $12. Required: a) Prepare the journal entry to record the issuance of the convertible bonds. (2 marks) b) Prepare the journal entries for December 31, 2021, relating to the employee stock option plan. (4 marks)
a) The journal entry to record the issuance of the convertible bonds by Yiruna Toys Inc. (YTI) on January 2, 2021, can be prepared as follows:
**Date:** January 2, 2021
**Debit:** Cash ($20,350,000)
**Debit:** Discount on Bonds Payable ($736,990)
**Credit:** Bonds Payable ($19,613,010)
**Credit:** Contributed Surplus - Conversion Rights ($473,980)
Explanation: The company received $20,350,000 in cash from the sale of the convertible bonds. The discount on bonds payable of $736,990 represents the difference between the proceeds received and the fair value of the bonds. The Bonds Payable account is credited for the fair value of the bonds ($19,613,010), and the Contributed Surplus - Conversion Rights account is credited for the remaining amount ($473,980), representing the value of the conversion feature of the bonds.
b) The journal entries for December 31, 2021, related to YTI's employee stock option plan are as follows:
1. To record the vesting of employee stock options:
**Date:** December 31, 2021
**Debit:** Contributed Surplus - Stock Option Plan ($405,000)
**Credit:** Contributed Surplus - Stock Option Plan Expense ($405,000)
Explanation: The vested portion of the stock options is recognized as an expense in the period. The debit reduces the Contributed Surplus - Stock Option Plan account, while the credit recognizes the corresponding expense.
2. To record the exercise of vested stock options:
**Date:** December 31, 2021
**Debit:** Cash ($720,000)
**Debit:** Contributed Surplus - Stock Option Plan ($54,000)
**Credit:** Common Shares ($774,000)
Explanation: The exercise of stock options results in the issuance of common shares. The cash received from the employees exercising the options is debited, and the Contributed Surplus - Stock Option Plan account is debited for the fair value of the options exercised ($54,000). The Common Shares account is credited for the total value of the shares issued ($774,000).
Note: The calculation of the amounts for the journal entries is based on the information provided in the question.
Learn more about Common Shares here:
https://brainly.com/question/32673363
#SPJ11
The head of operations for a movie studio wants to determine which of two new scripts they should select for their next major production. (Due to budgeting constraints, only one new picture can be undertaken at this time.) She feels that script #1 has a 70 percent chance of earning about $10,000,000 over the long run, but a 30 percent chance of losing $2,000,000. If this movie is successful, then a sequel could also be produced, with an 80 percent chance of earning $5,000,000, but a 20 percent chance of losing $1,000,000. On the other hand, she feels that script #2 has a 60 percent chance of earning $12,000,000, but a 40 percent chance of losing $3,000,000. If successful, its sequel would have a 50 percent chance of earning $8,000,000, but a 50 percent chance of losing $4,000,000. Of course, in either case, if the original movie were a "flop," then no sequel would be produced. Based on max EMV what is the expected value for the optimal decision (choose the nearest solution)?
O 6 million
O 7.2 million
O 8.4 million
O 9.1 million
O 15 million
The expected value for the optimal decision, based on the maximum EMV, is:$8,400,000 (option C)
The total expected monetary value for movie #1 is:$Total EMV1 = (0.70 x 6,400,000) + (0.30 x 0) = $4,480,000Calculation for Script #2:If movie #2 is successful, the expected monetary value for original movie and the possible sequel is:$EMV2 = (0.60 x 12,000,000) + (0.40 x -3,000,000) + (0.50 x 8,000,000) = $7,800,000Similarly, if movie #2 is unsuccessful, there will be no sequel, and the expected value will be zero. Therefore, the total expected monetary value for movie #2 is:$Total EMV2 = (0.60 x 7,800,000) + (0.40 x 0) = $4,680,000
Expected Value (EV) is a statistical measure used to estimate the potential value of a future investment or project by taking into account the likelihood of different results that may happen. It is also known as the expectation, average value, mean, or first moment. The expected monetary value (EMV) is a mathematical model that helps assess decision-making situations when uncertainty exists. It represents the average outcome when the decision is repeated over and over again.
To learn more about Expected Value visit here:
brainly.com/question/28197299
#SPJ11
According to research, employees will have a more positive mood on sunny days as opposed to rainy days.
True
False
According to the research, it is true that employees will have a more positive mood on sunny days as compared to rainy days. The weather is an external factor that affects the way people think, feel, and behave.
Weather has been found to have an impact on mood and performance. The impact of the weather can be seen on the behavior of the employees. In general, it has been found that employees tend to be more productive, happy, and satisfied with their job on sunny days. On rainy days, however, employees tend to be more irritable, anxious, and unproductive. This is due to the fact that sunny weather has a positive impact on mood and attitude while rainy weather has a negative impact on mood and attitude. Therefore, organizations need to take into account the impact of the weather on the performance of employees. They need to create an environment that is conducive to productivity and well-being.
To know more about employees
https://brainly.com/question/27404382
#SPJ11
Experts felt that one of the biggest challenges faced by MTV whilst launching MTV
Arabia was the prevalent culture in the Arab world. Discuss the Arab culture (hint: You
aren’t required to describe every country that belongs to the Arab region; focus on the big
picture "the general agreed-upon cultural norms and perspectives between all Arabs") (5
marks)
The Arab culture is known for its hospitality, and visitors are often treated with warmth and generosity. Dance and music play a crucial role in Arab culture and are often used as a form of entertainment.
MTV had a challenging task while launching MTV Arabia because one of the most significant problems was the Arab culture. One of the most distinctive cultural characteristics of the Arab world is its homogeneity, meaning that the culture is consistent and relatively uniform throughout the Arab world. This consistency is evident in many aspects of the Arab culture, including food, clothing, and language, among others. Arabic is the official language spoken in all Arab countries, although there are variations in dialects across the region. Arabic language plays a crucial role in defining the Arab culture's identity and unity. Islam is the predominant religion in the Arab world, and its principles, teachings, and values have shaped and influenced Arab culture. Family ties are incredibly significant in Arab culture, and it is customary to greet each other with warmth and affection. Family members often rely on each other for support in times of need. The culture of honor is another significant aspect of Arab culture. It is viewed as a precious commodity that must be protected at all costs.
learn more about predominant religion Refer: https://brainly.com/question/12881167
#SPJ11
A randomized control experiment to test the utility of a health drink was conducted between two groups of individuals of the same age, height, and weight. The number of individuals in the control group and the treatment group were 106 and 100 respectively. One group (the treatment group) was asked to consume the health drink for a certain period of time and the other group (the control group) was not permitted to consume the drink for the same interval of time. The objective was to check whether the BMI (Body Mass Index) of those who consume the drink remains the same or increases significantly relative to the control group. Let Yedenote the mean BMI of the control group and let P, denote the mean BM of the treatment group. Yo was calculated to be 20 whereas Yr was calculated to be 30. Let the population mean for those who consume the drink bey and the population mean for those who don't consume the drink bec Which of the following hypotheses should be used to compare the causal effect of the health drink on the BMI in order to ful the experiments objective? OA. H₂ #r- 10 vs H₂0 H₂##0 vs. H₁ T-Mo OC. M₂ Mr-Mo 0 vs H₁ ##0 OD. M₂-c0vs M₂1-10 Let me and ag te the number of individuals and the standard deviation of the control group, and let my and ay be the number of individuals and the standard deviation of the treatment group, respectively Complete the given table Difference Treatment vs. Control Group A (Central group) % nc Group Yy1 100 36 13 prade (Py-o) (-o) 90% confidence interval C OD 20 10 (Round your answers to four decimal places) 105 20 42 30
The hypothesis that should be used to compare the causal effect of the health drink on the BMI in order to fulfill the experiment's objective is:
H₂: μ₁ - μ₀ > 0 (Alternative hypothesis)
H₀: μ₁ - μ₀ ≤ 0 (Null hypothesis)
where μ₁ represents the population mean BMI of those who consume the health drink and μ₀ represents the population mean BMI of those who do not consume the health drink.
To calculate the difference between the treatment and control group means, we have:
Y₁ = 30 (mean BMI of the treatment group)
Y₀ = 20 (mean BMI of the control group)
The calculated difference is:
Y₁ - Y₀ = 30 - 20 = 10
To complete the given table:
Difference Treatment vs. Control Group
A (Central group) % nc Group Y₁ Y₀ Y₁ - Y₀ Pr(Y₁ - Y₀)
100 36 13 10 (-∞, 19.018)
Using a 90% confidence interval, we can conclude that the difference in mean BMI between the treatment and control groups (Y₁ - Y₀) falls within the range of (-∞, 19.018). This means that there is evidence to suggest that the health drink may have a positive effect on BMI, as the lower bound of the confidence interval is greater than zero.
Based on the hypothesis and the calculated difference in mean BMI, the experiment suggests that the health drink may have a significant impact on increasing BMI compared to the control group. However, further analysis and interpretation of the results, along with additional considerations, are needed to draw definitive conclusions.
To know more about hypothesis, visit
https://brainly.com/question/31483332
#SPJ11
Discuss why fiscal policy is ineffective under fixed regime when
there exists no capital mobility while it is effective under
floating regime with no capital mobility?
Answer:
Under a fixed exchange rate regime with no capital mobility, fiscal policy tends to be ineffective because the exchange rate is fixed and there is no capital movement across borders.
Explanation:
In this case, changes in fiscal policy, such as government spending or taxation, do not have a significant impact on the economy.
When there is no capital mobility, it means that capital cannot freely flow in and out of the country. This restriction limits the ability of fiscal policy to stimulate or dampen economic activity. Government spending increases or tax cuts aimed at boosting aggregate demand may not have the desired effect because capital cannot easily enter the country to support the increased demand or leave the country to mitigate any inflationary pressures.
On the other hand, under a floating exchange rate regime with no capital mobility, fiscal policy can be more effective. In a floating exchange rate system, the value of the currency is determined by market forces, allowing for adjustments in response to changes in fiscal policy.
In this scenario, expansionary fiscal policy, such as increased government spending or tax cuts, can stimulate aggregate demand and economic growth. As the economy expands, the exchange rate may depreciate, making exports more competitive and stimulating economic activity further. Similarly, contractionary fiscal policy measures can help reduce inflationary pressures by reducing aggregate demand.
The effectiveness of fiscal policy under a floating exchange rate regime with no capital mobility is primarily due to the flexibility of the exchange rate in responding to changes in the economy. The exchange rate acts as a shock absorber, helping to adjust external competitiveness and maintain macroeconomic stability.
Learn more about fixed exchange rate regime here:
brainly.com/question/32703744
#SPJ11
Which of the following is not a key role of an investment banker?a)Market-makerb)Underwriterc)Acting as a transfer agentd)Agent in private placement
Out of the given options, is that acting as a transfer agent is not a key role of an investment banker is the correct option.
Below are some of the key roles that an investment banker plays: Key roles of an Investment Banker.
1.Market-maker: Market-making is the process by which investment bankers make a market for the security they issue. In other words, it is the process by which investment bankers ensure that buyers and sellers are always available.
2. Underwriter: An underwriter is a financial institution that helps companies raise capital by issuing debt or equity. An investment banker underwrites new securities issued by companies, which means it buys all of the securities at a discounted rate and then resells them to the public at a higher rate.
3. Agent in private placement: An investment banker can also act as an agent in private placement. Private placement is a method of raising funds by selling securities to a small group of investors.
4. Merger and acquisition (M&A): Investment bankers play a key role in M&A transactions. They provide strategic advice to companies that are looking to merge or acquire another company. They also help companies raise capital to fund the transaction.
5. Sales and trading: Investment bankers are involved in the sales and trading of securities. They help clients buy and sell securities in the market, and provide advice on market trends and opportunities.
6. Research: Investment bankers also conduct research on various companies and industries to identify potential investment opportunities.
To know more about Investment visit :
brainly.com/question/30402057
#SPJ11
Can you please produce a business case for a new ablution project to be built at a school.
The new ablution to be built is meant for sanitation reasons because of students coming back to school after a long restriction from face to face classes because of covid. the new ablution would serve as a covid measure.
The proposed project aims to construct a new ablution facility at a school in response to the sanitation needs arising from students returning to face-to-face classes after COVID-19 restrictions.
The construct a new ablution project at the school is essential for several reasons. Firstly, the COVID-19 pandemic has highlighted the importance of maintaining good hygiene practices to prevent the spread of the virus. By implementing this project, the school can demonstrate a commitment to student safety and well-being, creating an environment that adheres to the recommended sanitation guidelines.
Secondly, the prolonged period of remote learning has resulted in a backlog of hygiene-related concerns at the school. With students returning to face-to-face classes, the existing ablution facilities may not be sufficient to accommodate the increased demand. The new ablution project would help alleviate these issues by providing additional facilities and resources, ensuring that students have access to clean and well-maintained washrooms.
Furthermore, the project aligns with the school's duty of care towards its students. By investing in upgraded ablution facilities, the school can instill confidence in parents and guardians that their children are attending an institution that prioritizes health and safety. This can contribute to increased enrollment and positive word-of-mouth recommendations, benefiting the school in the long run.
In terms of the financial aspect, while the construction of a new ablution project will require an initial investment, the long-term benefits far outweigh the costs. The reduced risk of infections and improved sanitation practices can lead to fewer student absences due to illness, ultimately enhancing the overall productivity and academic performance of the school.
In conclusion, building a new ablution project at the school in response to the sanitation needs arising from the COVID-19 pandemic is a sound business case. It ensures a safe and healthy learning environment, addresses hygiene concerns resulting from the transition back to face-to-face classes, and demonstrates the school's commitment to student welfare. The investment in improved ablution facilities will yield long-term benefits by minimizing the risk of infections, boosting enrollment, and enhancing the overall performance of the school.
Learn more about Construct:
brainly.com/question/791518
#SPJ11
The financial information of Z, Inc. is as follows:
EBIT/share: $5
EPS: $3
Growth rate: 15%
Stock Price per share: $48
The industry averages of price-EBIT ratio, PE ratio and PEG ratio are 10, 15, and 1.2 respectively.
What is the implied stock price of Z, Inc. using the PE ratio?
What is the implied stock price of Z, Inc. using the PEG ratio?
What is the implied stock price of Z, Inc. using the price-EBIT ratio?
Which ratio indicates that Z is overvalued?
To calculate the implied stock price of Z, Inc. using the PE ratio, we can multiply the EPS by the PE ratio. Given that the EPS is $3 and the PE ratio is 15, the implied stock price would be $3 * 15 = $45. To calculate the implied stock price of Z, Inc. using the PEG ratio, we multiply the EPS by the PEG ratio.
The PEG ratio is a measure of the stock's valuation relative to its growth rate. Given a growth rate of 15% and a PEG ratio of 1.2, the implied stock price would be $3 * 1.2 = $3.60. To calculate the implied stock price of Z, Inc. using the price-EBIT ratio, we multiply the EBIT per share by the price-EBIT ratio. The EBIT per share is $5 and the price-EBIT ratio is 10. Therefore, the implied stock price would be $5 * 10 = $50. Comparing the calculated implied stock prices with the actual stock price per share of $48, we can see that the PEG ratio indicates that Z, Inc. is overvalued. The implied stock price using the PEG ratio of $3.60 is lower than the actual stock price of $48, suggesting that the stock may be overpriced relative to its growth rate.
Learn more about PEG ratio here: brainly.com/question/18648490
#SPJ11
For a process with a centered mean to achieve three-sigma quality, how many standard deviations (assuming its value is known or estimated) can be covered between the lower and upper specification limits (LSL and USL)? 1 2 12 6 3 A supplier claims to have a product specification of 5 +0.1 kg in weight. According to its machine operator's record, the production process actually has the sample mean of 5.02 kg and a standard deviation of 0.04 kg. Calculate the process capability index for this supplier. What is your conclusion of the supplier's quality performance? Cpk - 0.67, the process has not even reached a 3-sigma quality Cpk = 1.33, the process has achieved a 6-sigma quality Cpk = 1.33, the process has achieved a 3-sigma quality Cpk - 2, the process has achieved a 6-sigma quality Cpk - 2. the process has achieved a 3-sigma quality
To achieve three-sigma quality, a process with a centered mean should cover 6 standard deviations between the lower and upper specification limits (LSL and USL).
In the given example, the process has a specification of 5 + 0.1 kg, which means the LSL is 4.9 kg and the USL is 5.1 kg. The sample mean of the production process is 5.02 kg, and the standard deviation is 0.04 kg.
To calculate the process capability index (Cpk), we need to determine the process capability ratio (Cp) first using the formula:
Cp = (USL - LSL) / (6 * standard deviation)
Cp = (5.1 - 4.9) / (6 * 0.04)
= 0.2 / 0.24
≈ 0.83
Once we have Cp, we can calculate Cpk using the formula:
Cpk = min((USL - mean) / (3 * standard deviation), (mean - LSL) / (3 * standard deviation))
Cpk = min((5.1 - 5.02) / (3 * 0.04), (5.02 - 4.9) / (3 * 0.04))
= min(0.08 / 0.12, 0.12 / 0.12)
= min(0.67, 1)
= 0.67
Therefore, the process capability index (Cpk) for this supplier is 0.67.
Based on this result, the correct conclusion would be:
Cpk = 0.67, the process has not even reached a 3-sigma quality.
This indicates that the process is not capable of consistently producing within the specified limits. The variability of the process is such that it falls short of achieving even a 3-sigma level of quality. Further improvements are needed to enhance the process capability and reduce variation.
Learn more about three-sigma quality here:
https://brainly.com/question/29993908
#SPJ11
3 An decrease in the separation rate will cause: The BC curve to shift left and the VC curve to pivot up. The BC curve to shift left and the VC curve to pivot down. The BC curve to shift right and the VC curve to pivot up. The BC curve to shift right and the VC curve to pivot down. QUESTION 4 Which of the following statements is false? Unions can have sufficient bargaining power to push wages above competitive market levels. Sticky wage theories cannot explain frictional unemployment. The search and matching model is an example of a sticky wage theory. None of the above statements are false.
The BC curve to shift left and the VC curve to pivot up would be caused by a decrease in the separation rate.Answer: When the separation rate falls, it means that less workers are leaving their jobs.
This will increase the unemployment rate. Hence, in such situations, businesses do not need to pay their employees more wages to entice them to stay, and wages can actually fall due to the surplus of labor. Thus, a decrease in the separation rate will cause the BC curve to shift left and the VC curve to pivot up.4) Sticky wage theories cannot explain frictional unemployment is a false statement.Answer: Sticky wage theories can explain frictional unemployment.
Sticky wage theories propose that wages are “sticky” and that the time it takes for them to adjust to changes in the market is longer than what might be expected. Due to this stickiness, changes in wages are sluggish, and it takes time to change them. This leads to unemployment.
To know more about VC curve visit:
https://brainly.com/question/13064210
#SPJ11
Company X and Company Y are very similar in every dimension. Company X issued bonds with the sinking fund provision while company Y issued bonds without the sinking fund provision. Which company's bond should offer lower yield?
O A. Company X
O B. Company Y
O C. Their yields should be the same
The correct answer is:O B. Company Y. When comparing similar bonds, a bond with a sinking fund provision is generally considered less risky for investors.
The sinking fund provision requires the issuer (in this case, Company X) to set aside funds periodically to retire a portion of the bond before maturity.
This provides added security to bondholders as it reduces the risk of default. As a result, investors typically demand a lower yield for bonds with a sinking fund provision compared to bonds without such a provision. Therefore, Company Y's bond, without the sinking fund provision, should offer a higher yield.
Find out more about sinking fund provision on:
brainly.com/question/14778799
#SPJ11
Back in 2020, you purchased a new Subaru Outback for $25,000. Due to the hot used car market, you can still re-sell this car for $22,000. What is the opportunity cost of continuing to use this car?
$25,000
$0
$22,000
$3,000
The opportunity cost of continuing to use the car is $3,000, as the current market value is $22,000 and the initial purchase price was $25,000.
The opportunity cost is determined by comparing the value of the next best alternative forgone. In this case, the next best alternative is selling the car for its current market value of $22,000.
By choosing to keep and use the car, you are giving up the opportunity to recoup the $3,000 difference between the initial purchase price and the current market value.
This $3,000 represents the potential benefit or value that could have been gained by selling the car instead.
Therefore, the opportunity cost of continuing to use the car is $3,000, reflecting the foregone opportunity to recover that amount by selling it in the hot used car market.
Learn more about Opportunity click here:brainly.com/question/19089759
#SPJ11
Following are the capital account balances and profit and loss percentages (indicated parenthetically) for the William, Jennings, and Bryan partnership: William (40%) Jennings (40%) Bryan (20%) $200,000 150,000 130,000 Darrow invests $250,000 in cash for a 30 percent ownership interest. The money goes to the business. No goodwill or other revaluation is to be recorded. After the transaction, what is Jennings's capital balance?
In the William, Jennings, and Bryan partnership, Jennings had a 40% ownership interest.
The capital account balances and profit and loss percentages were as follows:William (40%) = $200,000Jennings (40%) = $150,000Bryan (20%) = $130,000Darrow invested $250,000 in cash for a 30% ownership interest. The money was added to the business, and no goodwill or other revaluation was recorded. Therefore, the total capital in the partnership is $200,000 + $150,000 + $130,000 + $250,000 = $730,000.After the transaction, Darrow will have a 30% ownership interest, and Jennings's ownership interest will be reduced to 37.33 percent.
To calculate Jennings's new capital balance, we can use the following formula:New capital balance = Old capital balance + (Investment x New ownership percentage)Jennings's old capital balance was $150,000, and his new ownership percentage is 37.33%. Thus, Jennings's new capital balance would be:$150,000 + ($250,000 x 0.3733) = $236,825Therefore, Jennings's capital balance after the transaction is $236,825.
To learn more about account:
https://brainly.com/question/27154367
#SPJ11
Ashwood Industries is reviewing their capital expenditure projects for the year. The estimated total cost of new investments would be $100 million. Ashwood Industries expects net income to be $35 million this year. They wish to maintain their current debt-to-equity ratio of 1.25
a) Calculate the dividends paid and total external equity & debt financing required if the firm follows a residual dividend policy. (6 marks)
b) Calculate the dividends paid and external equity & debt financing required if the firm has a fixed payout ratio of 15% (4 marks)
a) Residual Dividend Policy:
Under the residual dividend policy, a company first funds its capital expenditures with retained earnings and then pays out dividends with any remaining earnings.
Given:
Total cost of new investments = $100 million
Net income = $35 million
Debt-to-equity ratio (D/E) = 1.25
Step 1: Calculate the equity and debt financing required for new investments.
Equity financing = Total cost of new investments - Retained earnings
Debt financing = Debt-to-equity ratio * Equity financing
Retained earnings = Net income - Dividends
Equity financing = Total cost of new investments - (Net income - Dividends)
Debt financing = Debt-to-equity ratio * Equity financing
Let's calculate:
Retained earnings = $35 million - Dividends
Equity financing = $100 million - ($35 million - Dividends)
= $100 million - $35 million + Dividends
= $65 million + Dividends
Debt financing = 1.25 * Equity financing
Now, we need to find the Dividends that maintain the debt-to-equity ratio.
Debt financing = 1.25 * ($65 million + Dividends)
= 1.25 * $65 million + 1.25 * Dividends
= $81.25 million + 1.25 * Dividends
Since the debt financing is equal to the equity financing, we have:
$81.25 million + 1.25 * Dividends = $65 million + Dividends
Simplifying the equation:
$81.25 million - $65 million = 1.25 * Dividends - Dividends
$16.25 million = 0.25 * Dividends
Dividends = $16.25 million / 0.25
Dividends = $65 million
Therefore, under the residual dividend policy:
Dividends paid = $65 million
Total external equity financing = Equity financing = $65 million + Dividends = $130 million
Total external debt financing = Debt financing = $81.25 million
b) Fixed Payout Ratio of 15%:
Under the fixed payout ratio policy, the company pays out a fixed percentage of its net income as dividends.
Given:
Net income = $35 million
Fixed payout ratio = 15%
Dividends paid = Fixed payout ratio * Net income
= 15% * $35 million
= $5.25 million
Total external equity financing = Dividends paid = $5.25 million
Total external debt financing = Debt financing = Debt-to-equity ratio * Equity financing
= 1.25 * $5.25 million
= $6.5625 million
To know more about Net Income visit:
brainly.com/question/29999079
#SPJ11
1) A worker has an income of $12,000.00, an MPC of 0.80 and pays taxes of 15% and also receives a remittance of $50. Calculate consumption and savings. 2) An economy has a consumption function of C=50+90Yd. Tax collection is $30 million, investment is $50 million, and public spending is $40. Calculate the macroeconomic balance.
1) Calculation of consumption and savings:The MPC is defined as the proportion of a change in income that is consumed. MPC = change in consumption/change in incomeGiven the MPC of 0.80, the remaining proportion of income is saved.
MPS = 1 - MPC = 1 - 0.80 = 0.20The total income received by the worker is $12,000.00, and the taxes paid is 15%, so the net income is:$12,000 - (0.15 * $12,000) = $10,200 Remittance is $50, so disposable income is:$10,200 + $50 = $10,250Consumption is:$10,250 * 0.80 = $8,200 Savings is:$10,250 * 0.20 = $2,050 Therefore, consumption is $8,200 and savings are $2,050.2) Calculation of macroeconomic balance:The consumption function of the economy is given by:C = 50 + 90Yd Given tax collection of $30 million, investment of $50 million, and public spending of $40 million, we can calculate the equilibrium level of income as follows:Aggregate expenditure (AE) = Consumption (C) + Investment (I) + Government spending (G)AE = C + I + GAE = (50 + 90Yd) + 50 + 40 Substituting in G, we get: AE = 50 + 90 Yd + 50 + 40AE = 90Yd + 140At equilibrium, AE = Y:Y = AEY = 90 Yd + 140 Y - 90 Yd = 140 Y = 140/10 = $14 billion The macroeconomic balance is calculated as the difference between aggregate expenditure and GDP.
Macroeconomic balance = AE - GDP Macroeconomic balance = (50 + 90Yd) + 50 + 40 - $14 billion Macroeconomic balance = 90Yd - $13.86 billion Therefore, the macroeconomic balance is $90Yd - $13.86 billion.
To know more about Remmitances visit-
https://brainly.com/question/29499570
#SPJ11
On the NYSE, limit order prices receive preference in establishing the posted bid and ask prices if they are more favorable than the specialist's. Therefore,
A. a specialist must fill a limit order, if possible, from his own account before trading the flow of public orders.
B. specialists must fill a limit order, if possible, from the flow of public orders before trading for his own account.
C. a specialist must change his posted bid and ask prices to reflect the available limit orders.
D. specialists must fill a limit order, if possible, from the flow of public orders before trading for his own account.
Therefore, specialists must fill a limit order, if possible, from the flow of public orders before trading for his own account. The correct answer is B.
On the NYSE, the specialist is responsible for maintaining a fair and orderly market for a particular stock. When a limit order is submitted and its price is more favorable than the specialist's bid or ask price, the limit order receives preference in establishing the posted bid and ask prices.
In this scenario, the specialist must prioritize filling the limit order from the flow of public orders, if possible, before trading for their own account. This ensures that public orders are given priority and that the market operates in a fair and transparent manner. The specialist's own account trading takes a secondary role after fulfilling the limit order from the public flow.
The correct answer is B.
To know more about stock refer to-
https://brainly.com/question/31940696
#SPJ11
Which type of contract would be best suited for a CM/GC building project?
A. Lump Sum B. Unit Prices C. Cost Plus
For a CM/GC building project, a type of contract that would be best suited would be a Cost Plus contract.
A CM/GC contract is also known as a construction management/general contracting contract. It is a contracting arrangement in which the owner contracts separately with a construction manager who acts as the owner’s consultant during the planning and design phases and as the project manager during the construction phase. The construction manager selects and coordinates the work of various construction contractors. Therefore, for a CM/GC building project, a type of contract that would be best suited would be a Cost Plus contract.
Cost Plus contract is a type of contract in which the owner agrees to pay the contractor for the actual cost of the project plus a fee, which is a percentage of the cost. This percentage is known as the contractor's fee. This fee is usually fixed at the beginning of the project, and it is based on the estimated cost of the project. This type of contract is suitable for a CM/GC building project since it provides flexibility, as well as a means for the owner to stay informed about the progress of the project through the construction manager’s reports. In conclusion, a Cost Plus contract is best suited for a CM/GC building project since it provides flexibility, as well as a means for the owner to stay informed about the progress of the project through the construction manager’s reports.
Learn more about cost plus contract
https://brainly.com/question/13581931?
#SPJ11
ClamShell Security (CSS) is a division of a large, listed company, X3Cate Limited (X3L). The CSS Division produces software products to protect customer’s computers from infection from computer viruses and other malware. The sales of its products have been growing over the last few years as its products become more accepted in the market. The Board of X3L want to introduce a new product line that would specifically protect against Ransomware, a new security threat, particularly business customers. Each Divisional Manager can earn large bonuses on top of their base salaries if they maintain Return on Investment greater than 25% otherwise the bonus payments are halved.
The following information is for the year that has just ended related to the CSS Division performance:
Profit percentage (Return on Sales): 30%
Sales revenue: $15 000 000
Average capital invested $18 000 000
7.
Required:
Calculate the Return on Investment (ROI) achieved by the CSS Division over the past year? (3 marks)
To calculate the Return on Investment (ROI) achieved by the CSS Division, we need to divide the division's profit by its average capital invested.
Profit percentage (Return on Sales): 30%
Sales revenue: $15,000,000
Average capital invested: $18,000,000
To find the profit, we multiply the profit percentage by the sales revenue:
Profit = 30% x $15,000,000 = $4,500,000
Return on Investment (ROI) = Profit / Average capital invested
ROI = $4,500,000 / $18,000,000 = 0.25 or 25%
The ROI achieved by the CSS Division over the past year is 25%. Since the ROI is equal to the threshold of 25% required by the Board to earn full bonuses, the Divisional Manager would be eligible for the full bonus payment.
This indicates that the division has effectively utilized its capital to generate a profit, meeting the performance expectation set by the Board. The ROI reflects the division's ability to generate returns from the investment made in the business, demonstrating its profitability and efficiency.
To know more about Return on Investment, please visit
https://brainly.com/question/28622693
#SPJ11
What is a project champion and list some ways to keep a champion involved with the project.
A project champion is an individual who is passionate about the project and willing to fight for its success. They possess a deep understanding of the project's objectives, as well as the knowledge, skills, and resources necessary to achieve them.
They also have excellent communication skills and the ability to inspire others to contribute to the project.A project champion can play a crucial role in the project's success. Here are some ways to keep a champion involved in the project:1. Recognize and reward their contributions to the project.2. Keep them informed of the project's progress and milestones.3. Involve them in key decisions and problem-solving activities.4. Provide them with the resources and support they need to be successful.5. Keep them engaged by assigning challenging tasks and responsibilities.
6. Celebrate successes and recognize the contributions of the project champion and the project team.7. Encourage them to share their ideas and insights with the team.8. Ensure that they have a clear understanding of the project's goals and objectives and how their contributions will help achieve them.9. Listen to their feedback and address their concerns.10. Keep them motivated by providing regular updates on the project's progress and its impact on the organization.
To know more about knowledge visit :
https://brainly.com/question/32631309
#SPJ11
Karan Goes Home- Due at the end of class on June 7, 2022
Karan, has returned to India after living and working overseas for many years. He came to Canada in 2010, got a degree from Loyalist College and worked for 2 Canadian firms that dealt mostly domestically and with US customers. He started in the accounting department and worked his way up " the ladder" to managing teams in various departments and was a member of the Executive Management Team for planning strategy.
He has received a very good offer from Sandra India Inc and has returned with some prodding from his family who has found him a lovely bride.
He is trying to settle into the new workplace where he has ` the challenging task of turning around a department that has not been performing well. He has worked out a plan and hopes to show results soon by getting his team to deliver stretch targets. A "stretch target" is one that the organization cannot achieve simply by working a little harder or a little smarter. To achieve a stretch target, people have to invent new strategies, new incentives—entirely new ways of achieving their purpose. Knowing that he has a strong team who are committed, he has been trying to lead them in the way that has worked for him in the past.
After a short period of time he is called by Megha who is the Senior EVP of HR and advised to reflect on his style because there have been numerous complaints from his departmental subordinates that his style is unfriendly and overly critical.
He is truly shocked and shaken to hear this. How is it possible that despite his efforts to treat everyone well while trying to get them to perform at their best to implement his turnaround plan that they have reacted this way.
QUESTION
Give your conclusion on the best possible solution?
Karan, who has been away from India for several years, has now returned and is working for Sandra India Inc. As a new employee, Karan's job is to turn around a department that has been underperforming.
Despite Karan's attempts to treat everyone well while attempting to get them to perform at their best in implementing his turnaround plan, he has received numerous complaints from his departmental subordinates about his style, which is unfriendly and overly critical. Best Possible Solution: Karan should reflect on his Executive Management Team style because the complaints are likely to be genuine. He should attempt to develop a more collaborative and empathetic leadership approach that emphasizes employee engagement and involvement in decision-making and problem-solving. Karan should also look for the root cause of the underperformance, identify the problems, and work collaboratively with his team to solve them.
Karan should also consult with his Executive Management Team to establish a roadmap for improvement and provide a platform for better communication between employees and management. This would assist Karan in determining the most effective method for implementing his stretch targets.
To learn more about Executive Management Team, visit here
https://brainly.com/question/30512078
#SPJ11
The requirement for testing cannot be completed any earlier than four days after the prototype is built is best represented by? Start-to-start with lag Finish-to-start with lag Finish-to-Finish with lag Start-to-Start with lag
The Finish-to-Start with lag is the best representation of the condition that testing cannot be finished earlier than four days after the prototype is constructed.
Finish-to-Start with Lag is a type of dependency in which the first task, or predecessor, must be completed before the second task, or successor, can begin, but there must be a period of time before the second task can begin. The period of time that elapses between the conclusion of one operation and the commencement of the next is referred to as lag time.
There are four types of dependencies, namely Start-to-Start (SS), Finish-to-Finish (FF), Start-to-Finish (SF), and Finish-to-Start (FS). In this question, we can deduce that the testing process cannot begin any earlier than four days after the prototype is built. This means that the first task, the prototype, must be completed before the testing process, which is the second task, can begin.
To Know more about predecessor,
https://brainly.com/question/4264648
#SPJ11
3. Consider the original form (before augmenting) of a linear programming problem with n decision variables (each with a nonnegativity constraint), and m functional constraints. Label each of the following statements as true or false, and then justify your answer with specific references (including page citations) to material in the chapter. (1)If a feasible solution is optimal, it must be a CPF solution. (2) The number of CPF solutions is at least (mun)! ! (3)If a CPF solution has adjacent CPF solutions that are better (as measured by Z), then one of these adjacent CPF solutions must be an optimal solution.
The answer to the questions are as follows:
(1) True: If a feasible solution is optimal, it must be a CPF solution.The statement is true. A feasible solution is optimal only if it is a corner-point feasible solution (CPF). This is because the CPF solution satisfies the non-negativity constraints. Therefore, any optimal solution that does not meet the CPF solution cannot satisfy the constraints and will therefore not be optimal. The assertion is consistent with page 69 of the chapter that says, "Every optimal solution must be a corner-point feasible solution."
(2) False: The number of CPF solutions is at least (m+n)!.The statement is false. The number of CPF solutions is at most (m+n)!. The assertion is consistent with page 68 of the chapter that states, "The number of corner points is at most (m+n)!/(m!n!)."
(3) False: If a CPF solution has adjacent CPF solutions that are better (as measured by Z), then one of these adjacent CPF solutions must be an optimal solution.The statement is false. If there are adjacent CPF solutions that are better (as measured by Z), then there can be more than one optimal solution. This assertion is consistent with page 71 of the chapter, which states that a linear programming problem can have more than one optimal solution if there is more than one CPF solution with the same objective function value.
To know more about optimal solution visit:
https://brainly.com/question/14914110
#SPJ11
a) Prepare a production cost schedule for the Assembly
Department at the end of September using the weighted average
method of process costing.
b) Prepare the necessary journal entries.
its
j
$164,160 Required: a) Prepare a production cost schedule for the Assembly Department at the end of September using the weighted average method of process costing (marks) b) Prepare the necessary journ
To prepare the production cost schedule for the Assembly Department at the end of September using the weighted average method of process costing, we need to calculate the equivalent units of production and the cost per equivalent unit for direct materials and conversion costs.
(a) Production Cost Schedule:
| | Units | Direct Materials | Conversion Costs |
|--------------------------|---------|------------------|-----------------|
| Beginning WIP Inventory | 6,400 | | |
| Units started | 8,000 | | |
| Total Units | 14,400 | | |
| Units completed | 12,800 | | |
| Ending WIP Inventory | ? | | |
To calculate the equivalent units of production and the cost per equivalent unit, we need to consider the degree of completion for both direct materials and conversion costs.
Equivalent Units of Production:
Direct Materials: Units completed = 12,800 units
Degree of completion = 100%
Equivalent units of production for direct materials = Units completed * Degree of completion
= 12,800 units * 100%
= 12,800 units
Conversion Costs: Units completed = 12,800 units
Degree of completion = 60%
Equivalent units of production for conversion costs = Units completed * Degree of completion
= 12,800 units * 60%
= 7,680 units
Cost per Equivalent Unit:
Direct Materials Cost = $520,000
Equivalent units of production for direct materials = 12,800 units
Cost per equivalent unit of direct materials = Direct Materials Cost / Equivalent units of production for direct materials
= $520,000 / 12,800 units
Conversion Costs = $800,000 + $1,040,000
Equivalent units of production for conversion costs = 7,680 units
Cost per equivalent unit of conversion costs = Conversion Costs / Equivalent units of production for conversion costs
= ($800,000 + $1,040,000) / 7,680 units
Once we determine the cost per equivalent unit for direct materials and conversion costs, we can calculate the total cost for the units completed and the cost of the ending work-in-process inventory.
Total Cost Calculation:
Cost of Units Completed = Cost per equivalent unit of direct materials * Equivalent units of production for direct materials
+ Cost per equivalent unit of conversion costs * Equivalent units of production for conversion costs
Cost of Ending WIP Inventory = Cost per equivalent unit of direct materials * Equivalent units of production in ending WIP inventory
+ Cost per equivalent unit of conversion costs * Equivalent units of production in ending WIP inventory
(b) Journal Entries:
To record the production costs, we need to make the following journal entries:
1. Work-in-Process Inventory (Assembly Department) - Debit
Direct Materials - Debit
Conversion Costs - Debit
To record the costs added to the work-in-process inventory.
2. Work-in-Process Inventory (Assembly Department) - Debit
Finished Goods Inventory - Credit
To transfer the completed units from work-in-process to finished goods.
To know more about Journal Entry visit-
brainly.com/question/20421012
#SPJ11
In the Model of Open Economy (Figure 1 below), use Saving (S), Investment (1), Net Export (NX), Net Capital Outflow (NCO) or their combinations to fill in the blanks in below: a. Demand of Loanable Funds is b. Supply of Loanable Funds is c. Demand of Domestic Currency is d. Supply of Domestic Currency is Fill in the blank with the comma separating the answers, for example: S, S+I, NX, NCO Real Interest Rate 4 (a) The Market for Loanable Funds Supply Demand Figure 1 Real Interest Rate 4 (b) Net Capital Outflow Net capital outflow, NCO Real Exchange Rate E₁ Supply Demand Quantity of Dollars
In the Model of Open Economy (Figure 1 below), the following terms can be used to fill in the blanks:a. Demand of Loanable Funds is S + NCOb. Supply of Loanable Funds is S + I + NXc.
Demand of Domestic Currency is NX + NCOd. Supply of Domestic Currency is NCO or S + NXReal Interest Rate 4(a) The Market for Loanable FundsSupply: S + I + NXDemand: S + NCOFigure 1Real Interest Rate 4(b) Net Capital OutflowNet capital outflow, NCOReal Exchange Rate E₁Supply: NCO or S + NXDemand: NX + NCOQuantity of DollarsMore than 100 words:An open economy is one that interacts with the rest of the world.
An open economy consists of households, businesses, and governments that purchase and sell goods and services in international markets, as well as domestic economies that interact with each other. Economic models of open economies help us understand the implications of international trade and capital flows.
To know more about Economy visit:
https://brainly.com/question/30131108
#SPJ11
What are the characteristics of a monopolistically competitive market? 1) Degree of substitution among products: High 2) Entry and exit: Free 3) Type of product: Differentiated What happens to the equilibrium price and quantity in such a market if one firm introduces a new, improved product? If a firm introduces a new, improved product, then O A. the demand curve for each of the other firms remains unaffected, leaving the price and quantity received by those incumbents unchanged. OB. the demand curve for each of the other firms shifts inward, reducing the price and increasing quantity received by those incumbents. O C. the demand curve for each of the other firms shifts inward, increasing the price and quantity received by those incumbents. OD. the demand curve for each of the other firms shifts inward, reducing the price and quantity received by those incumbents. O E. the demand curve for each of the other firms shifts outward, reducing the price and quantity received by those incumbents.
In a monopolistically competitive market, if a firm introduces a new, improved product, the demand curve for each of the other firms will shift inward, reducing the price and quantity received by those incumbents.
In a monopolistically competitive market, firms offer differentiated products, meaning they have some degree of uniqueness or variation in their products. Each firm has some control over the price it charges due to the differentiation. When a firm introduces a new, improved product in this market, it attracts customers and creates a competitive advantage.
The entry of a new, improved product affects the demand for other firms' products in the market. Consumers may shift their preferences and demand more of the new product, leading to a decrease in demand for the existing products. This decrease in demand results in a leftward shift of the demand curve for each of the other firms. As a result, the price and quantity received by those incumbents decrease.
The introduction of a new, improved product intensifies competition in the market and puts pressure on existing firms to innovate or differentiate their products further to maintain their market share. This dynamic process of competition and product differentiation characterizes monopolistically competitive markets.
Learn more about demand curve, below:
https://brainly.com/question/28374935
#SPJ11
General Horizon Inc. has the following information pertinent to their capital structure. They want to keep their WACC at 8%. What should be the number of outstanding shares? The tax rate is 25%. Round your answer to the nearest whole number.
Semi-annual Bond
- Years to maturity 4.5
- Coupon rate 6%
- Face value $1,000,000
- Current market price 105
Common Stock
- Risk free rate 2%
- Beta 1.5
- Current market price $55
- Market risk premium 5%
To determine the number of outstanding shares, we need to calculate the cost of equity and the cost of debt.
Cost of Debt:
The cost of debt can be calculated using the formula:
Cost of Debt = Coupon Rate * (1 - Tax Rate)
Cost of Debt = 6% * (1 - 0.25) = 4.5%
Cost of Equity:
The cost of equity can be calculated using the Capital Asset Pricing Model (CAPM):
Cost of Equity = Risk-Free Rate + Beta * Market Risk Premium
Cost of Equity = 2% + 1.5 * 5% = 9.5%
Weighted Average Cost of Capital (WACC):
WACC = (Equity / Total Capital) * Cost of Equity + (Debt / Total Capital) * Cost of Debt
Assuming the capital structure consists of only equity and debt:
Equity + Debt = Total Capital
Since the WACC is given as 8%, we can set up the equation:
0.08 = (Equity / (Equity + Debt)) * 9.5% + (Debt / (Equity + Debt)) * 4.5%
Solving for Debt:
(Debt / (Equity + Debt)) * 4.5% = 0.08 - (Equity / (Equity + Debt)) * 9.5%
(Debt / (Equity + Debt)) = (0.08 - 0.095 * (Equity / (Equity + Debt))) / 0.045
substitute the given market price and solve for the equity:
$55 = Equity / Number of Outstanding Shares
Finally, plug the equity value into the debt equation to find the number of outstanding shares.
Learn more about cost of equity here:
https://brainly.com/question/23968382
#SPJ11
Suppose the unemployment last year was 3.9% and the labor force was 165 m people. The unemployment rate this month was 3.5%. If there was no change in the labor force, how many fewer people are unemployed this month compared to last year? Now, suppose 2 million people left the labor force since last year. What would the change in the number of unemployed people be in that case?
The number of fewer unemployed people this month, compared to last year, is approximately 544,500 individuals. However, if 2 million people left the labor force since last year, the change in the number of unemployed people would be zero, as the decrease in the labor force would offset the decrease in the unemployment rate.
To calculate the number of fewer unemployed people this month compared to last year, we first find the number of unemployed individuals in each period. In the first scenario, with an unemployment rate of 3.9% and a labor force of 165 million people, the number of unemployed individuals would be 3.9% of 165 million, which equals approximately 6.435 million. In the second scenario, with an unemployment rate of 3.5%, the number of unemployed individuals would be 3.5% of 165 million, which equals approximately 5.775 million. The difference between these two numbers is approximately 660,000, indicating that there are 544,500 fewer unemployed people this month compared to last year.
Learn more about unemployment rate here:
https://brainly.com/question/29400060
#SPJ11
Lane Industries is considering three independent projects, each of which requires a $1.6 million investment. The estimated internal rate of return (IRR) and cost of capital for these projects are presented here:
Project H (high risk): Cost of capital = 12% IRR = 14%
Project M (medium risk): Cost of capital = 11% IRR = 9%
Project L (low risk): Cost of capital = 7% IRR = 8%
Note that the projects' costs of capital vary because the projects have different levels of risk. The company's optimal capital structure calls for 40% debt and 60% common equity, and it expects to have net income of $3,500,000. If Lane establishes its dividends from the residual dividend model, what will be its payout ratio? Round your answer to 2 decimal places.
_____________%
To determine Lane Industries' payout ratio, we need to calculate the total dividends paid out to common equity shareholders. The payout ratio is defined as the ratio of dividends to net income. Here's how we can calculate it:
Net Income = $3,500,000
Since the company follows the residual dividend model, it first covers its financing needs and then distributes the remaining funds as dividends. Given that the optimal capital structure is 40% debt and 60% common equity, we need to calculate the financing needs and subtract them from the net income.
Financing Needs = Total Investment - Equity Portion
= $1,600,000 - (0.60 * $1,600,000)
= $1,600,000 - $960,000
= $640,000
After covering the financing needs, the remaining funds are available for dividends:
Available Dividends = Net Income - Financing Needs
= $3,500,000 - $640,000
= $2,860,000
Now we can calculate the payout ratio:
Payout Ratio = Dividends / Net Income
= Available Dividends / Net Income
= $2,860,000 / $3,500,000
= 0.8171 (rounded to four decimal places)
Therefore, the payout ratio is 81.71%.
Learn more about dividend payout ratios here:
brainly.com/question/31965559
#SPJ11.
