Answer:
c
Explanation:
boiling
Como se explica o fato de o diamante e o grafite serem formados pelo mesmo elemento, o carbono, e serem materiais completamente diferentes?
Answer:
Ver explicacion
Explanation:
La capacidad de un elemento de existir en diferentes formas en el mismo estado físico se conoce como alotropía.
No es solo el carbono el que exhibe alotropía. También se sabe que el azufre y el fósforo exhiben alotropía.
Hay dos alótropos cristalinos de azufre; grafito y diamante. El grafito y el diamante difieren en la disposición de los átomos de carbono y la naturaleza de los enlaces entre los átomos de carbono en ambas sustancias.
Por lo tanto, el grafito y el diamante tienen propiedades físicas y químicas observadas completamente diferentes debido a las diferencias en la disposición de los átomos de carbono en cada sustancia, así como a las diferencias en la naturaleza de los enlaces entre los átomos de carbono en ambas sustancias.
Make a list of all the possible human sources of carbon dioxide. Giving brainliest
17) What is the molarity
of a solution with
55 grams of CaCl2
dissolved in .78 L
of water?
a. 64M
b. 1.3 M
c. 171 M
d. 91 M
The molarity of a solution with 55 grams of CaCl2 dissolved in 0.78 L is 0.64M. Details about molarity is found below.
How to calculate molarity?The molarity of a solution can be calculated by dividing the number of moles of the substance by its volume.
However, the number of moles of a substance must first be calculated using the following expression:
no of moles = 55g ÷ 111g/mol
no of moles = 0.49mol
Molarity of CaCl2 solution = 0.49mol ÷ 0.78L
Molarity of CaCl2 solution = 0.64M
Therefore, the molarity of a solution with 55 grams of CaCl2 dissolved in 0.78 L is 0.64M.
Learn more about molarity at: https://brainly.com/question/2817451
Hydrogen gas reacts with chlorine gas to form hydrogen chloride as shown in the following reaction: H2 (9) + Cl2 (g) + 2HCl (9) If a 454.4 g sample of chlorine gas (MM = 71.0 g/mol) was reacted with excess hydrogen at 565 K and 2.30 atm, how many grams of hydrogen chloride gas (MM = 36.5 g/mol) are produced? g Your answer should be rounded to three significant figures. Do not include units in your answer
Answer:
467
Explanation:
ncl2 = 454.4x1/(71.0 g/mol) = 6.40 mols cl2
6.40 mols cl2 x 2molsHCL/1moleCL2 x 36.5g/1moleHCL = 467 g HCL
One mole of chlorine gas gives two moles of hydrogen chloride. Thus, 454.4 g of chlorine gas will give 467.2 g of hydrogen chloride.
What is hydrogen chloride?Hydrogen chloride is a covalent compound formed by the electron sharing of chlorine and hydrogen. It normally exists in gaseous state and can be liquified to the acidic form.
As per the balanced reaction one mole of chlorine gas gives two moles of hydrogen chloride gas. The molecular mass of chlorine gas is 71 g/mol. The molar mass of HCl is 36.5 g/mol.
Hence, 71 g of chlorine gas gives 73 g of HCl. Then, the mass of HCl produced from 454.4 g of chlorine gas is calculated as follows:
mass of HCl = (454.4 × 73) / 71
= 467.2 g.
Therefore, the mass of HCl produced from 454.4 g of chlorine gas is 467.2 g.
To find more on HCl, refer here:
https://brainly.com/question/13016495
#SPJ2
If a response is towards a stimulus it's described as _______; if a response is away from the stimulus it's described as _____.
Answer: Positive tropism, negative tropism
Explanation:
Stimulus can be define as external and internal agent which generate a response in an organism. If the growth and action is towards the stimulus it is called as positive tropism. If the growth and action is away from the stimulus it is called as negative tropism. Example, the growth of the stem towards the sunlight is called positive tropism whereas the growth of the root away from the sunlight is called negative tropism. Here, sunlight is the stimulus.
What of the following is NOT a common property of metals?
Answer:
the last one
Explanation:
liquid at room temp
A gas occupies 650.mL at STP. How many moles of gas are in the container?
Please help ((((
Explanation:
describe this guy standing
What is the half-life of a radioisotope if a 20 g sample becomes 5 g after 2 days?
Answer: A- 1 day
Explanation: I really hope that helped. BYE!!
1 day is the half-life of a radioisotope if a 20 g sample becomes 5 g after 2 days
Air is made of nitrogen, carbon dioxide, and small amounts of other gases. What is the pressure of O₂, total is 1 atm if PN₂ = 593.4 mm Hg, PCO₂ = 3.0 mm Hg, and Pothers = 7.1 mm Hg? *
0.3 atm
0.2 atm
0.4 atm
0.8 atm
Answer:
The pressure of O₂ is 0.8 atm.
Explanation:
The pressure exerted by a particular gas in a mixture is known as its partial pressure. So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:
PT = PA + PB
This relationship is due to the assumption that there are no attractive forces between the gases.
In this case:
PT=Pnitrogen + Pcarbon dioxide + Pother gases
Being:
Pnitrogen: 593.4 mmHg Pcarbon dioxide: 3 mmHgPother gases: 7.1 mmHgand replacing:
PT= 593.4 mmHg + 3 mmHg + 7.1 mmHg
you get:
PT= 603.5 mmHg
Being 760 mmHg= 1 atm, you get:
PT= 603.5 mmHg= 0.8 atm
The pressure of O₂ is 0.8 atm.
If you start with 50 grams of H2O how much NaOH would you produce
2 Na + 2 H2O = 2 NaOH + H2
How much water should be added to 5.00 g of KCl to prepare a 0.500 m
solution? *
Molality = moles of solute
Kg of solvent
100 g
38g
500 g
134 g
Other
Answer:133.4
c
m
3
Explanation: Explanation:
Molarity is number of moles of solute divided by number of litres of solution.
M
=
n
V
Rearrange for V to give
V
=
n
M
Number of moles of KCl is the mass divided by the molar mass of KCl which is 75.5 g/mol, so (5/75.5) = 0.0667 moles.
Now plug in the numbers:
V
=
n
m
=
0.0667
0.5
=
0.1334
litres
So you need to add 0.1334 litres of 133.4
c
m
3
of water.
(NB: symbol for molarity is upper case M. m is metres).
what may happen when two light waves traveling from oposite directoins meet?
Answer:
The meet
Explanation:
Which of these is not a characteristic of sponges?
lack a backbone
lack a brain
stationary
have a nervous system
what is the physical change of a liquid to a solid by the removal of heat?
HELP ME PLEASE WILL GIVE BRAINLY NO BAD ANSWERS
Answer:
7.17
Explanation:
convert 5.50g to moles of salicylic acid. Then use mole ratios and convert the moles of salicylic acid to moles of Asprin(mole ratio is 1:1). Then convert the moles to grams using the molar mass of asprin.
A gas occupies 12.3 L at a temperature of 40.0 K. What is the volume when the temperature is increased to 60.0 K?
Answer:
the volume is 18.45 L
Explanation:
The computation of the volume when the temperature is increased to 60.0 K is shown below:
Since the gas occupied 12.3 L at a temperature of 40.0 k
And, the volume when the new temperature is 60.0 k
So, the volume is
= 60.0 k × 12.3 L ÷ 40.0 k
= 18.45 L
hence, the volume is 18.45 L
For the reaction of C 2H 4( g) with O 2( g), to form CO 2( g) and H 2O( g), what number of grams of CO 2 could be produced from 2.0 g of C 2H 4 and 5.0 g of O 2?
Answer:
4.58g of CO₂ could be produced
Explanation:
Based on the reaction:
C₂H₄(g) + 3O₂(g) → 2CO₂(g) + 2H₂O(g)
1 mole of C₂H₄ reacts with 3 moles of oxygen to produce 2 moles of CO₂
To solve this question we must find the moles of each reactant in order to find limiting reactant. With limiting reactant we can find the moles -And the mass- of CO₂ produced:
Moles C₂H₄ -Molar mass: 28.05g/mol-
2.0g * (1mol / 28.05g) = 0.0713moles
Moles O₂ -Molar mass: 32g/mol-
5.0g * (1mol / 32g) = 0.156moles
For a complete reaction of 0.0713 moles of C2H4 are required:
0.0713 moles C₂H₄ * (3 moles O₂ / 1 mol C₂H₄) = 0.214 moles of O₂
As there are just 0.156 moles, O₂ is limiting reactant.
The moles of CO₂ produced are:
0.156 moles O₂ * (2mol CO₂ / 3mol O₂) = 0.104 moles CO₂
The mass is -Molar mass CO₂: 44.01g/mol-
0.104 moles CO₂ * (44.01g / mol) =
4.58g of CO₂ could be producedSpeed is the rate of change of position expressed as _____ traveled per unit of time. A. direction B. meter C. displacement D. distance
Answer. Speed is the rate of change of position expressed as distance travelled per unit of time
give brainliest if right
Answer:
distance
Explanation:
Gas is confined in a metal tank in the figure. At 20.20°C, the gas exerts a pressure of 8.532 atm.
After heating the tank, the pressure of the gas increases to 10.406 atm. What is the temperature of
the heated gas?
Answer:
The temperature of the heated gas is 357.6 K (or 84.6 C)
Explanation:
Gay Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move faster. Then the number of collisions with the walls increases, that is, the pressure increases. That is, the pressure of the gas is directly proportional to its temperature.
In short, when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases.
So, this law indicates that the quotient between pressure and temperature is constant:
[tex]\frac{P}{T} =k[/tex]
You want to study two different states, an initial state 1 and a final state 2. Then it is true:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 8.532 atmT1= 20.20 C= 293.2 K (being 0 C= 273 K)P2= 10.406 atmT2= ?Replacing:
[tex]\frac{8.532 atm}{293.2 K} =\frac{10.406 atm}{T2}[/tex]
Solving:
[tex]T2*\frac{8.532 atm}{293.2 K} =10.406 atm[/tex]
[tex]T2=10.406 atm*\frac{293.2 K}{8.532 atm}[/tex]
T2= 357.6 K
The temperature of the heated gas is 357.6 K (or 84.6 C)
The new temperature of the heated gas when the pressure increase to 10.406 atm is 84.60 °C
Data obtained from the question Initial temperature (T₁) = 20.20°C = 20.20 + 273 = 293.20 KInitial pressure (P₁) = 8.532 atm Volume = constant New pressure (P₂) = 10.406 atmNew temperature (T₂) =? How to determine the new temperatureThe new temperature of the gas can be obtained by using the combined gas equation as illustrated below:
P₁V₁ / T₁ = P₂V₂ / T₂
Since the volume is constant, we have:
P₁ / T₁ = P₂ / T₂
8.532 / 293.20 = 10.406 / T₂
Cross multiply
8.532 × T₂ = 293.20 × 10.406
Divide both side by 8.532
T₂ = (293.20 × 10.406) / 8.532
T₂ = 357.6 K
Subtract 273 from 357.6 K to express in degree celsius
T₂ = 357.6 – 273
T₂ = 84.60 °C
Learn more about gas laws:
https://brainly.com/question/6844441
Is this an example of physical or chemical weathering?
chemical
physical
Answer:
Physical
Explanation:
because the erosion of the canyon did not change any of the chemical attributes of the rock it only changed the appearance. it may have changed the color which is an example of chemical properties but in this case, it is physical. But in other cases, you would refer to this type of weathering as mechanical weathering.
Answer:
it physical
Explanation:
because it moving
What are the products of the following neutralization reaction? (No need to balance)
H3PO4 + Ba(OH)2 --> ??? + ???
A.)H2O + Ba3(PO4)2
B.)H30+ + BaPO4
C.)H30+ + Ba3(PO4)2
D.)H2O + BaPO4
H3PO4 + Ba(OH)2 --> Ba3(PO4)2 + H2O
so, (A) H2O + Ba3(PO4)2 is your answer.
Project: Communicating Design Details
Answer:
Do you have an idea that you want the design to be about? if you do I can help! if not I can give you ideas you can try to work with and you can tell me if theyre good or not.
Explanation:
A student combines 20.0 grams of hydrogen and 20.0 grams of oxygen in a reaction. According to the law of conservation of mass, how many grams of water should be produced?
A)20.0grams B)40.0grams C)30.0grams D)10.0grams
Answer:
A)20.0grams
Explanation:
Answer:
10
Explanation:
I need help on this asp
Answer:
copper or steel
Explanation:
hope this helps
Ca(NO3)2 wht is the mass
Answer:
164.088 g/mol
Explanation: hope this helps
Answer:
Calcium nitrate
Explanation:
164.088 g/mol
give me the brainliest plss
Which choices are uses of electrical energy?
Choose all that apply.
A. creates useful gases
B. supplies energy for heat
C. provides power to lights
D. creates a magnetic force
Answer:
option A,B and C.
are the options I chose.
The electrical devices include those that are needed to power appliances and those that are used in daily life. In order to make things operational, they need power or energy.
Electrical energy is taken from the movement of electronically charged particles. These when collide produce energy that can be used for heating, lighting, etc.Hence the option C is correct.
Learn more about the choices are uses of electrical energy.
brainly.com/question/20580527
Describe what is wrong with this sentence:
"When you kick a soccer ball, you create new
kinetic energy!"
Answer:
You transfer kinetic energy from you foot to the ball.
Explanation:
Energy cannot be created or destroyed.
Answer:
hi..,......
.....hsjnsgzgkskshbs
Which change happens when a fan is turned on?
A. Electrical energy is changed into light energy
B. Heat energy is changed into mechanical energy
C. Mechanical energy is changed into sound energy
D. Electrical energy is changed into mechanical energy
Answer:
D. Electrical energy is changed into mechanical energy
Explanation:
When you turn on the fan, the electricity that is given through the power outlet allows the fan to have the available energy to spins the fan blades. By the fan's blades spinning, this is a movement that can be described as mechanical energy.
What are the 2 common uses for Polonium?
How many liters of water vapor is produced when 33.4 moles of gaseous ammonia is reacted in the following reaction? Hint: Convert to moles first
Answer:
4 liters I think actually hold on
