Answer:
C. 9.6%.
Explanation:
Our first task in this would be to determine the amount at which the note was issued using the discount rate
PV=FV-(FV*discount rate*8/12)
PV=$100,000-($100,000*9%*8/12)
PV=$94,000
interest rate=($100,000-$94,000)/$94,000
interest rate=6.38%(for 8 months)
Effective interest rate=6.38%/8*12
effective interest rate=9.6%
Which of the following is a major difference between a budget constraint and production possibilities frontier?
a. A production possibilities frontier conveys the relative prices of the two goods, whereas a budget constraint accounts for diminishing returns.
b. A production possibilities frontier is usually straight, whereas a budget constraint is typically curved.
c. A budget constraint typically has a constant slope, whereas the slope of a production possibilities frontier is usually different at various points.
d. There is no difference. They convey the same information.
Answer:
c
Explanation:
The Production possibilities frontiers is a curve that shows the various combination of two goods a company can produce when all its resources are fully utilised.
The PPF is concave to the origin. This means that as more quantities of a product is produced, the fewer resources it has available to produce another good. As a result, less of the other product would be produced. So, the opportunity cost of producing a good increase as more and more of that good is produced.
So, the PPF exhibits diminishing return. The slope of the PPF is different at different points. this makes the PPF a curve
the budget constraint is a straight line that shows the various combinations of goods a consumer can consume given her income. the budget constraint is a straight line because the slope is constant at each point on the curve
Also, the slope of the budget constraint is the relative prices of the two goods
During July, the production department of a process operations system completed and transferred to finished goods 24,000 units that were in process at the beginning of July and 72,000 that were started and completed in July. July's beginning inventory units were 100% complete with respect to materials and 30% complete with respect to labor. At the end of July, 29,000 additional units were in process in the production department and were 100% complete with respect to materials and 35% complete with respect to labor. The beginning inventory included labor cost of $52,400 and the production department incurred direct labor cost of $451,250 during July. Compute the direct labor cost per equivalent unit for the department using the weighted-average method.
Answer:
the direct labor cost per equivalent unit for the department is $4.74 per unit
Explanation:
The computation of the direct labor cost per equivalent unit for the department is given below:
Equivalent units for direct labor cost is
= 24,000 unit + 72,000 units + 35% of 29,000
= 24,000 units + 72,000 units + 10,150 units
= 106,150 units
Now the direct cost per equivalent unit is
= ($52,400 + $451,250) ÷ 106,150 units
= $4.74 per unit
Hence, the direct labor cost per equivalent unit for the department is $4.74 per unit
The current asset section of the Excalibur Tire Company’s balance sheet consists of cash, marketable securities, accounts receivable, and inventory. The December 31, 2021, balance sheet revealed the following:
Inventories $840,000
Total assets $2,800,000
Current ratio 2.25
Acid-test ratio 1.2
Debt to equity ratio 1.8
Determine the following 2021 balance sheet items:
a. Current assets
b. Shareholders' equity
c. Noncurrent assets
d. Long-term liabilities
Answer:
a. Current assets = $1,800,000
b. Shareholders' equity = $1,000,000
c. Noncurrent assets = $1,000,000
d. Long-term liabilities = $1,000,000
Explanation:
a. Current assets
Current liabilities = Inventories / (Current ratio - Acid-test ratio) = $840,000 / (2.25 - 1.2) = $800,000
Since Current assets / Current liabilities = 2.25 = Current ratio, therefore, we have:
Current assets = Current ratio * Current liabilities = 2.25 * $800,000 = $1,800,000
b. Shareholders' equity
Debt to equity ratio = Total liabilities / Shareholders' equity = 1.8
Total liabilities = (1.8 * Shareholders' equity)
Total assets = $2,800,000
Total assets = Total liabilities + Shareholders' equity ………….. (1)
Substituting all the relevant values into equation (1) and solve for Shareholders' equity, we have:
$2,800,000 = (1.8 * Shareholders' equity) + Shareholders' equity
$2,800,000 = (1.8 + 1) * Shareholders' equity
$2,800,000 = 2.8 * Shareholders' equity
Shareholders' equity = $2,800,000 / 2.8 = $1,000,000
c. Noncurrent assets
Noncurrent assets = Total assets - Current assets = $2,800,000 - $1,800,000 = $1,000,000
d. Long-term liabilities
Long-term liabilities = Total assets - Current liabilities - Shareholders' equity = $2,800,000 - $800,000 - $1,000,000 = $1,000,000
Now- a quick question. Assume at the beginning of Year2, Becker Company has a credit (positive) balance in the AOCI account of $10800. Becker Company reports $653000 of net income for Year2. Becker has an unrealized gain of $12000 during Year2. The gain qualifies as OCI (Other comprehensive income). 1. What will Becker report as Accumulated Other Comprehensive Income on the Year2 balance sheet
Answer:
Becker Company
The amount that Becker will report as Accumulated Other Comprehensive Income on the Year 2 balance sheet is:
= $22,800.
Explanation:
a) Data and Calculations:
Year 2 Beginning balance:
Accumulated other comprehensive income (AOCI) = $10,800 credit
Year 2 reported net income = $653,000
Unrealized gain during Year 2 = $12,000
The Accumulated Other Comprehensive Income on the Year 2 balance sheet is:
Beginning balance $10,800
Unrealized gain 12,000
AOCI for Year 2 = $22,800
b) Becker's Accumulated Other Comprehensive Income includes unrealized gains and losses arising from some investments, pension plans, and hedging transactions. These are usually reported in the equity section of the balance sheet and then netted off from the retained earnings.
Project A requires a $ 385,000 initial investment for new machinery with a five year life and a salvage value of . The company uses straight - line depreciation . Project A is expected to yield annual net income of $ 23,100 per year for the next five years.
Required:
Compute Project A's payback period.
Answer:
4.2 years
Explanation:
Here is the complete question
Project A requires a $ 385,000 initial investment for new machinery with a five year life and a salvage value of $44,000. The company uses straight - line depreciation . Project A is expected to yield annual net income of $ 23,100 per year for the next five years.
Required:
Compute Project A's payback period.
Payback = amount invested / cash flow
cash flow = net income + depreciation
depreciation = (cost of asset - salvage value) / useful life
(385,000 - 44,000) / 5 = 68,200
Cash flow = 68,200 + $ 23,100 = 91300
$ 385,000 / 91300 =4.2
Local marketing is an effective tool used by marketers to reach intended market segments. Groupon has capitalized on this concept by tailoring brands and marketing to the needs and wants of local customer segments—cities, neighborhoods, and even specific stores. According to its website, Groupon “offers a vast mobile and online marketplace where people discover and save on amazing things to do, see, eat, and buy. By enabling real time commerce across local businesses, travel destinations, consumer products, and live events, shoppers can find the best a city has to offer. Groupon is redefining how small businesses attract and retain customers by providing them with customizable and scalable marketing tools and services to profitably grow their businesses.” This concept lies at the heart of Groupon’s mission: “to connect local commerce, increasing consumer buying power while driving more business to local merchants through price and discovery.” To help consumers make those connections, Groupon offers a mobile app, online marketplace, and social media touchpoints where customers can readily access information on its daily deals. Questions: Q1. How does Groupon use target marketing? Provide examples. Q2. Discuss the ways in which small businesses can utilize local social media marketing in your community. Q3. Have you heard about Groupon? Explain their business Q4. Do you use Groupon? Q5. Is it effective in helping local businesses to meet the challenges of local marketing? Why or why not?
Answer:
hdhwhhdndnjsjndbxhhdhshhshxhx
A company paid $0.85 in cash dividends per share. Its earnings per share is $3.50, and its market price per share is $35.50. Its dividend yield equals:
Answer: 2.4%
Explanation:
Cash dividend = $0.85
Earnings per share = $3.50
Market price per share = $35.50
The dividend yield will be calculated as:
= Cash dividends / Market price per share
= $0.85 / $35.50
= 0.024
= 2.4%
The dividend yield is 2.4%.
If the price elasticity of supply is 0.5 and the quantity supplied decreases by 6%, then the price must have decreased by 3%. a. True b. False
Answer: False
Explanation:
The price elasticity of supply measures the change in quantity supplied when the price changes.
The basic trend is that when price increases, quantity supplied increases as well. The reverse is true.
Price elasticity of supply = %Change in quantity supplied / % change in price
0.5 = -6% / Change in price
0.5 * Change in price = -6%
Change in price = -6% / 0.5
= -12%
The statement above is therefore false because price should have reduced by 12% for quantity supplied to reduce by 6%
If the return on stock A in year 1 was 6 %, in year 2 was 3 %, in year 3 was 18 % and in year 4 was 3 %, what was the standard deviation of returns for stock A over this four year period? (Round your answer to 1 decimal place and record without a percent sign. If your final answer is negative, place a minus sign before the number with no space between the sign and the number).
Answer:
12.4
Explanation:
We need to,first of all, determine the arithmetic average return of all the returns, which is the sum of the returns divided by the number of returns
average return=(6%+3%+18%+3%)/4
average return=7.50%
Years return (return-average return) (return-average return)^2
1 6.00% -1.50% 0.022500%
2 3.00% -4.50% 0.202500%
3 18.00% 10.50% 1.102500%
4 3.00% -4.50% 0.202500%
average return 7.50% variance 1.530000%
standard deviation=variance^(1/2) 12.4%
g Find the monthly payment and estimate the remaining balance (to the nearest dollar). Assume interest is on the unpaid balance. 5-year car loan for $9700 at 5%; remaining balance after 4 years.
Answer:
Monthly payment $102.88
Outstanding balance after year 4 $1,201.76
Explanation:
First and foremost, the car loan amount of $9,700 is the present value of all monthly payments for 5 years as shown below:
PV=monthly payment*(1-(1+r)^-n/r
PV=car loan amount=$9,700
monthly payment=unknown
r=monthly interest rate=5%/12=0.004166667
n=number of monthly payments in 5 years=5*12=60
$9700=monthly payment*(1-(1+0.004166667)^-120/0.004166667
$9700=monthly payment*(1-(1.004166667)^-120/0.004166667
$9700=monthly payment*(1-0.607161016 )/0.004166667
$9700=monthly payment*0.392838984 /0.004166667
$9700=monthly payment*94.28134862
monthly payment=$9700/94.28134862
monthly payment=$102.88
The outstanding balance after year 4 is the present value of monthly payments for the remaining 1 year(12 months)
PV=$102.88*(1-(1+0.004166667)^-12/0.004166667
PV=$102.88*(1-(1.004166667)^-12/0.004166667
PV=$102.88*(1-0.951328238 )/0.004166667
PV=$102.88*0.048671762 /0.004166667
PV=$1,201.76
Select the market segment that looks the most promising?
1. Luxury trenfollowers
Segment size 5,000(5%)
Growth rate 7%
2. School children
Segment size 35,000 (35%)
Growth rate 1%
3. University students
Segment size 24,099(24%)
Growth rate 5%
4. Outdoor enthusiasts
Segment size 14,000 (14%)
Growth rate 5%
5. Urban commuters
Segment size 20,000 (20%)
Growth rate 3%
Answer:
Luxury Trend followers
Explanation:
The consider which market segment shows the most or higest level of promise, we may have to the growth rate of each segment, which is the percentage change in earnings or revenue over a specific period of time. From the data given, the market segment with the greatest growth rate is the trend followers segment with a growth rate of 7%
Luxury trend followers : 7%
School children : 1%
University students : 5%
Outdoor enthusiasts : 5%
Urban Commuters : 3%
Concord Company has recently tried to improve its analysis for its manufacturing process. Units started into production equaled 18900 and ending work in process equaled 1000 units. Concord had no beginning work in process inventory. Conversion costs are applied uniformly throughout production, and all materials are applied at the beginning of the process. How much is the materials cost per unit if ending work in process was 30% complete and total materials costs equaled $86940
Answer:
the material cost per unit is $4.60 per unit
Explanation:
The computation of the material cost per unit is shown below:
= Total material cost ÷ equivalent units of material
= $86,940 ÷ (18,900 - 1,000) × 100% + 1,000 × 100%
= $86,940 ÷ (17,900 + 1,000)
= $86,940 ÷ 18,900
= $4.60 per unit
Hence, the material cost per unit is $4.60 per unit
The same should be considered and relevant
If a company spends $80 million to build facility space sufficient to hold 5 million pairs of footwear-making equipment at a site in Latin America, then the company's annual depreciation costs for this facility space will be
Answer: $8,000,000
Explanation:
From the question given, the cost of the building facility is $80 million. Also, it should be noted that the default rate for depreciation is given as 10%, therefore, the company's annual depreciation costs for this facility space will be:
= Depreciation rate × Cost of building
= 10% × $80,000,000
= 0.1 × $80,000,000
= $8,000,000
Question 12
0.5 pts
The goal of any monopolist is to maximize:
economic profits.
normal profits.
price.
consumer welfare.
output.
Answer:
economic profits.
Explanation:
A monopoly is a market structure which is typically characterized by a single-seller who sells a unique product in the market by dominance. This ultimately implies that, it is a market structure wherein the seller has no competitor because he is solely responsible for the sale of unique products without close substitutes.
Also, a monopolist refers to any individual that deals with the sales of unique products in a monopolistic market.
Generally, the goal of any monopolist is to maximize economic profits.
Basically, a monopolist earns an economic profit when the average total cost (AVC) of his goods and services is less than price.
Unlike a business firm operating in a perfectly competitive market, a monopolist can continue to earn economic profits in the long-run because there exist an extremely high level of barriers to entry for new business firms.
Sammy Co. uses process costing to account for the production of popcorn. Direct materials are added at the beginning of the process and conversion costs are incurred uniformly throughout the process. Equivalent units have been calculated to be 20,000 units for materials and 18,200 units for conversion costs. Beginning inventory consisted of $6,200 in materials and $4,400 in conversion costs. May costs were $47,000 for materials and $32,000 for conversion costs. Ending inventory still in process was 4,000 units (100% complete for materials, 55% for conversion). The cost per equivalent unit for conversion costs using the weighted average method would be:
Answer:
$2.00
Explanation:
Calculation to determine what The cost per equivalent unit for conversion costs using the weighted average method would be:
Using this formula
Cost per equivalent unit for conversion costs=Beginning inventory for conversion costs +May costs for conversion)/Equivalent units for conversion costs
Let plug in the formula
Cost per equivalent unit for conversion = ($4,400 + $32,000)/18,200
Cost per equivalent unit for conversion =$36,400/18,200
Cost per equivalent unit for conversion = $2.00
Therefore The cost per equivalent unit for conversion costs using the weighted average method would be:$2.00
g A construction company builds roads with machinery (capital, K) and labor (L). If we plot the isoquants for the production function so that labor is on the horizontal axis, then a point on the isoquant with a small MRTS (in absolute value) is associated with high __________ use and low __________ use. A. labor; capital B. concrete; gravel C. capital; labor D. None of the above.
Answer:
A. labor; capital
Explanation:
In the production function theory, here we presume that the isoquants should be convex shaped and the MRTS should be isoquant slop that should be downward as it is shifted from left to right. Now if it is along on the horizontal axis that goes towards right so here MRTS falls and the labor rises. Due to increased in labor, the capital should falls because of the negative slope
Therefore the option a is correct
The point on the isoquant with a small MRTS (in absolute value) is associated with high labor use and low capital use.
In a production function theory, we will presume that the isoquants should be convex shaped and the MRTS should be isoquant slop hence, should be downward as it is shifted from left to right.
if the MRTS is along on the horizontal axis that goes towards right, hence, the MRTS falls and the labor rises.
Hence, due to the increase in labor, the capital should falls because of the negative slope.
Therefore, the Option A is correct since the point on the isoquant with a small MRTS (in absolute value) is associated with high labor use and low capital use.
Read more about production function theory
brainly.com/question/17247385
Medical profession is a very sensitive profession.Do U agree?Give 5 reason
Answer:
Medical profession is very sensitive and intellectual where human life is at risk. A successful effort of a doctor can save a life. Due to that, a doctor is known as 2nd God. When he attempts a major and long surgery, his endurance, hard work and mental ability spotlight his character.
If the ABC Company has three lots of products for sale, purchase 1 (earliest) for $20, purchase 2 (middle) for $15 and purchase 3 (latest) for $25, which cost would be assumed to be sold first using FIFO costing
Answer:
Results are below.
Explanation:
Giving the following information:
Purchase 1 (earliest) for $20
Purchase 2 (middle) for $15
Purchase 3 (latest) for $25
The FIFO (first-in, first-out) method, allocates costs to the cost of goods sold using the purchase price of the firsts units incorporated into inventory. On the contrary, the ending inventory cost is calculated with the costs of the lasts units incorporated.
Assume that the company sells the number of units equivalent to the first lot. Then, the cost of goods sold will be $20; and the ending inventory $40 (15+25).
Halsted Corp. has identified three cost pools in its manufacturing process: equipment maintenance, setups, and quality control. Total cost assigned to the three pools is $214,500, $101,400, and $153,000, respectively. Cost driver estimates for the pools are 10,000 machine hours, 150 setups, and 450 quality inspections, respectively.
Required:
Calculate the activity rate for each of Halsted's cost pools.
Answer:
Maintenance $21.45 per Machine Hour
Setup $676 per Setup
Quality Control $340 per Inspection
Explanation:
Calculation to determine the activity rate for each of Halsted's cost pools.
Activity rate for MAINTENANCE COST
Using this formula
Activity rate= Total maintenance cost / Total machine hours
Let plug in the morning
Activity rate=$214,500/ 10,000
Activity rate= $21.45 per Machine Hour
Activity rate for SETUPS
Using this formula
Activity rate= Total Setups /Setups
Let plug in the formula
Activity rate= $101,400/150
Activity rate=$676 per Setup
Activity rate for QUALITY CONTROL
Using this formula
Activity rate= Total Quality control /Quality inspections
Let plug in the formula
Activity rate= $153,000/450
Activity rate= $340 per Inspection
Therefore the activity rate for each of Halsted's cost pools will be:
Maintenance $21.45 per Machine Hour
Setup $676 per Setup
Quality Control $340 per Inspection
Chicotti Company has 6,000 units in beginning work in process, 30% complete as to conversion costs, 75,000 units transferred out to finished goods, and 2,000 units in ending work in process 20% complete as to conversion costs. The beginning and ending inventory is fully complete as to materials costs. How much are equivalent units for materials if the FIFO method is used
Answer:
71,000
Explanation:
Calculation to determine How much are equivalent units for materials if the FIFO method is used
Using this formula
Equivalent units for materials=(Units transferred out to Finished goods + Units in ending work in process – Units in beginning work in process)
Let plug in the formula
Equivalent units for materials=75,000 + 2,000 – 6,000
Equivalent units for materials= 71,000
Therefore the equivalent units for materials if the FIFO method is used will be 71,000
Forner, Inc., manufactures and sells two products: Product Z1 and Product Z8. The company has an activity-based costing system with the following activity cost pools, activity measures, and expected activity:
Estimated Expected Activity
Activity Cost Pools Activity Measures Overhead Cost Product Z1 Product Z8 Total
Labor-related DLHs $112,190 600 2,000 2,600
Machine setups setups 40,440 500 700 1,200
Order size MHs 609,770 3,000 3,200 6,200
$762,400
The activity rate for the Machine Setups activity cost pool under activity-based costing is closest to:
$203.26 per setup
$190.55 per setup
$122.97 per setup
$33.70 per setup
Answer:
Machine setups= $33.7 per setup
Explanation:
Giving the following information:
Activity Cost Pools Activity Measures Overhead Cost Product Z1 Product Z8 Total
Machine setups setups 40,440 500 700 1,200
To calculate the activity rate for Machine setup, we need to use the following formula:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Machine setups= 40,440 / 1,200
Machine setups= $33.7 per setup
Sims Company, a manufacturer of tablet computers, began operations on January 1, 2019. Its cost and sales information for this year follows. Manufacturing costs Direct materials $ 40 per unit Direct labor $ 60 per unit Overhead costs Variable $ 30 per unit Fixed $ 7,000,000 (per year) Selling and administrative costs for the year Variable $ 770,000 Fixed $ 4,250,000 Production and sales for the year Units produced 100,000 units Units sold 70,000 units Sales price per unit $ 350 per unit 1. Prepare an income statement for the year using variable costing. 2. Prepare an income statement for the year using absorption costing.
Answer:
Sims Company
Income Statements Variable Costing Absorption Costing
Sales revenue $24,500,000 $24,500,000
Cost of goods sold:
Variable cost of manufacturing 9,100,000 9,100,000
Variable cost of selling and admin. 770,000 0
Fixed manufacturing cost 0 4,900,000
Total cost of goods sold $9,870,000 $14,000,000
Contribution margin $14,630,000 0
Gross profit 0 $10,500,000
Fixed /Period costs:
Fixed manufacturing cost $7,000,000 0
Selling and administrative expenses:
Variable $ 770,000
Fixed 4,250,000 4,250,000
Total period/fixed costs $11,250,000 $5,027,000
Net operating income $3,380,000 $5,473,000
Explanation:
a) Data and Calculations:
Manufacturing costs
Direct materials $ 40 per unit
Direct labor $ 60 per unit
Overhead costs
Variable $ 30 per unit
Total variable manufacturing cost per unit = $130
Fixed $ 7,000,000 (per year)
Selling and administrative costs for the year
Variable $ 770,000
Fixed $ 4,250,000
Production and sales for the year
Units produced 100,000 units
Units sold 70,000 units
Ending inventory = 30,000 units
Sales price per unit $ 350 per unit
Short-term investments are intended to be converted into cash within the longer of one year or the operating cycle of the business, and are readily convertible to cash. True or False
Answer:
True
Explanation:
The reasons why many companies invest in other companies includes
1. Due to excess cash not needed immediately, so invested to earn additional income to use for operations
2. Long- term strategic reasons etc
The criteria for a current asset is that the investment must be liquid and be able to convert to cash within one year (or become a long-term investment).
Short-term investments
This is a current assets. It is also called marketable securities. This is a form of an investments made in marketable securities that can be converted easily to cash which a company plans to hold for 1 year or less than one year.
The 3 categories of short-term investments. They includes:
1. Trading securities
2. available-for-sale securities
3. Held to maturity investment.
Bialy Company had the following information: Total sales $120,000 Total variable cost 48,000 Operating income 12,000 What is the breakeven sales revenue
Answer:
$100,000
Explanation:
The breakeven sales revenue is the annual fixed cost divided by the contribution margin ratio of the product, which is the amount of sales revenue that the Bialy company needs to achieve in order to make a zero profit.
operating income=sales revenue-variable cost-fixed cost
operating income=$12,000
sales revenue=$120,0000
variable cost=$48,000
fixed cost=unknown
$12,000=$120,000-$48,000-fixed cost
fixed cost=$120,000-$48,000-$12,000
fixed cost=$60,000
total contribution=sales revenue-variable cost
total contribution=$120,000-$48,000
total contribution=$72,000
contribution margin ratio=total contribution margin/sales revenue
contribution margin ratio=$72,000/$120,000
contribution margin ratio=60%
breakeven sales revenue=$60,000/60%
breakeven sales revenue=$100,000
The country of Bolivia had a Gross Domestic Product of $79 billion in 2016 and a population of 11 million people, the GDP per capita would be ________.
Answer:
The GDP per capita of country of Bolivia would be $7,181.82.
Explanation:
GDP Per capita refers to a measure that calculates a country's economic output per person by dividing its GDP by its population.
Therefore, we have:
GDP per capita = GDP / Population = $79 billion / 11 million = $79,000,000,000 / $11,000,000 = $7,181.82
Therefore, the GDP per capita of country of Bolivia would be $7,181.82.
Wasilko Corporation produces and sells one product The budgeted selling price per unit is $114. Budgeted unit sales for February is 9,900 units. Each unit of finished goods requires 6 pounds of raw materials. The raw materials cost $4.00 per pound. The direct labor wage rate is $24.00 per hour. Each unit of finished goods requires 2.4 direct labor-hours. Manufacturing overhead is entirely variable and is $9.00 per direct labor-hour. The variable selling and administrative expense per unit sold is $1.60. The fixed selling and administrative expense per month is $70,000. The estimated net operating income (loss) for February is closest to:
Answer: $21,080
Explanation:
First calculate the contribution margin per unit
= Sales - Variable costs
= Selling price - Raw materials - Direct labor cost - Manufacturing overhead - Variable selling and administrative expense
= 114 - (6 * 4) - (2.4 * 24) - (9 * 2.4) - 1.60
= $9.20
The Contribution margin is:
= 9.20 * 9,900 units
= $91,080
Net operating income = Contribution margin - fixed cost
= 91,080 - 70,000
= $21,080
Firm A has a 21 percent marginal tax rate, and Firm Z has a 28 percent marginal tax rate. Firm A owns a controlling interest in Firm Z. The owners of Firm A decide to incur a $9,500 deductible expense that will benefit both firms.
Required:
Compute the after-tax cost of the expense assuming that:
a. Firm A incurs the expense
b. Firm Z incurs the expense
Answer:
a. $7,505
b.$6,840
Explanation:
a. Computation for the after-tax cost of the expense assuming that Firm A incurs the expense
Using this formula
After-tax cost = Deductible Expense - (Firm A Marginal tax rate* Deductible Expense)
Let plug in the formula
After-tax cost = ($9,500 - ($21%*9500)
After-tax cost = ($9,500 - $1,995)
After-tax cost=$7,505
Therefore the after-tax cost of the expense assuming that Firm A incurs the expense is $7,505
B. Computation for the after-tax cost of the expense assuming that Firm Z incurs the expense
Using this formula
After-tax cost = Deductible Expense - (Firm Z Marginal tax rate*Deductible Expense)
Let plug in the formula
After-tax cost =$9,500 -(28%*$9500)
After-tax cost =($9,500 - $2,660 )
After-tax cost=$6,840
Therefore the after-tax cost of the expense assuming that Firm Z incurs the expense is $6,840
Question
In 2 hours, China can produce 6 bottles of milk. In 5 hours, it can produce 15 batches of pumpkins. What is the country's
opportunity cost of producing 1 bottle of milk (in terms of batches of pumpkins)?
your answer below:
Answer:
China's opportunity cost of producing 1 bottle of milk is equal to one batch of pumpkins.
Explanation:
Given that in 2 hours, China can produce 6 bottles of milk, and in 5 hours, it can produce 15 batches of pumpkins, to determine what is the country's opportunity cost of producing 1 bottle of milk (in terms of batches of pumpkins), the following calculation must be performed:
Milk = 6/2 = 3 per hour
Batches of pumpkins = 15/5 = 3 per hour
3/3 = 1
Therefore, China's opportunity cost of producing 1 bottle of milk is equal to 1 batch of pumpkins.
Good afternoon. Kindly assist on the following please. Assignment due by 4:30pm Mike bookshop had the following structure. Share capital 500000 ordinary shares of $1 each. 300000 10% preference of $1 each. Reserves Share premium 200 000 General reserves 100 000 Retained earnings 400 000 8% debenture 100 000 During the year the following transaction took place. 01 January issue of 200 000 $1 ordinary shares at$1,20 and 100 000 preference shares at $2 each. 01 June a 1 for 4 right issue at a premium of $0,10c each per share. 01 December 1 for 5 bonus shares fully paid. All shares issued during the year qualified for bonus and the company wishes to leave the reserves in their flexible form. Required. Balance sheet extract.
Answer:
Mike Bookshop
Balance Sheet Extract as at December 31
Share capital:
1,050,000 ordinary shares of $1 each $1,050,000
400,000 10% preference of $1 each 400,000
Total share capital $1,450,000
Reserves:
Share premium 357,500
General reserves 100,000
Retained earnings 225,000
Total reserves $682,500
8% debenture $100,000
Explanation:
a) Data and Analysis:
Share capital:
500000 ordinary shares of $1 each.
300000 10% preference of $1 each.
Reserves:
Share premium 200 000
General reserves 100 000
Retained earnings 400 000
8% debenture 100 000
During the year the following transaction took place.
01 January Cash $240,000 Ordinary share capital $200 000 Share Premium $40,000
$1 ordinary shares at$1.20 and
01 January Cash $200,000 Preferred share capital $100 000 Share Premium $100,000
01 June Cash $192,500 Ordinary share capital $175,000 Share Premium $17,500
a 1 for 4 right issue at a premium of $0.10c each per share.
01 December Retained Earnings $175,000 Ordinary share capital $175,000
1 for 5 bonus shares fully paid.
Ordinary share capital:
Beginning balance $500,000
January 1 issue 200,000
June 1 rights issue 175,000
Dec. 1 bonus issue 175,000
Ending balance $1,050,000
Preferred share capital:
Beginning balance $300,000
January 1 issue 100,000
Ending balance $400,000
Share Premium:
Beginning balance $200,000
January 1 issues 140,000
June 1 rights issue 17,500
Ending balance $357,500
General reserves $100,000
Retained Earnings:
Beginning balance $400,000
Dec. 1 Bonus issue (175,000)
Ending balance $225,000
Job-Order Costing versus Process Costing Required: Identify each of the following types of businesses as either job-order or process costing. a. Hospital services b. Custom cabinet making c. Toy manufacturing d. Soft-drink bottling e. Airplane manufacturing (e.g., 767s) f. Personal computer assembly g. Furniture making (e.g., computer desks sold at discount stores) h. Custom furniture making i. Dental services j. Paper manufacturing k. Nut and bolt manufacturing l. Auto repair m. Architectural services n. Landscape design services o. Flashlight manufacturing
Answer:
Job-Order Costing versus Process Costing
Types of businesses using job order costing:
a. Hospital services
b. Custom cabinet making
e. Airplane manufacturing (e.g., 767s)
h. Custom furniture making
i. Dental services
l. Auto repair
m. Architectural services
n. Landscape design services
Types of businesses using processing costing:
c. Toy manufacturing
d. Soft-drink bottling
f. Personal computer assembly
g. Furniture making (e.g., computer desks sold at discount stores)
j. Paper manufacturing
k. Nut and bolt manufacturing
o. Flashlight manufacturing
Explanation:
In job order costing, the manufacturer tracks its prime costs to individual products or jobs. This means that the costs of each job can be computed separately because costs are traced to each job. Under process costing, the prime costs are tracked to the department, process or batch, and not to individual products or jobs.
