One of the asteroids, Ida, looks like an elongated potato. Surprisingly it has a tiny (compared to Ida) spherical moon! This moon called Dactyl has a mass of 4.20 × 10^16 kg, and a radius of 1.57 × 10^4 meters, according to Wikipedia. Ida has a radius of 3.14 x 10^4 meters.
Find the acceleration of gravity on the surface of this little moon.

Answers

Answer 1

Answer:

g = 0.0114 m/s²

Explanation:

The value of acceleration due to gravity on the surface of the moon can be given by the following formula:

[tex]g = \frac{Gm}{r^2}[/tex]

where,

g = acceleration due to gravity on the surface of moon = ?

G = Universal Gravitational Constant = 6.67 x 10⁻¹¹ N.m²/kg²

m = mass of moon = 4.2 x 10¹⁶ kg

r = radius of moon = 1.57 x 10⁴ m

Therefore,

[tex]g= \frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(4.2\ x\ 10^{16}\ kg)}{(1.57\ x\ 10^4\ m)^2}[/tex]

g = 0.0114 m/s²


Related Questions

A bicyclist moves along a straight line with an initial velocity vo and slows downs. Which of the following the best describes the signs set for the initial position, initial velocity and the acceleration ?​

Answers

The sign set after the slowdown of the bicycle will be positive for the position,  negative for velocity, and negative for acceleration.

What is velocity?

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

According to Que, when a bicyclist moves in a straight line and slows down, then the velocity decrease as displacement is decreasing, and the acceleration also decreases only displacement increases.

Therefore, the sign set for the position is +ve, for velocity it is -ve, and for acceleration also -ve

To know more about Velocity:

https://brainly.com/question/19979064

#SPJ1

A biker slows down after traveling in a long, straight line at initial velocity v0. Which of the following the best \sdescribes the signs set for the initial position, initial velocity and the acceleration? Initial position Initial velocity Acceleration

A. Positive Negative Negative

B. Positive Positive Negative

C. Negative Positive Negative

D. Negative Negative Positive

E. Negative Negative Negative

1 of 3 : please help got an extra day for a test and i don’t get this (must show work) points and brainliest!

Answers

Answer:

y = 1/2at^2

we could also write it as-

y = (at^2)/2

2y = at^2

2y/a = t^2

√2y/a = t

hope it helps

The potential difference between the plates of a capacitor is 234 V. Midway between the plates, a proton and an electron are released. The electron is released from rest. The proton is projected perpendicularly toward the negative plate with an initial speed. The proton strikes the negative plate at the same instant the electron strikes the positive plate. Ignore the attraction between the two particles, and find the initial speed of the proton.
I have tried looking at the cramster.com solution manual and do not like the way it is explained. Simply put, I cannot follow what is going on and I am looking for someone who can explain it in plain man's terms and help me understand and get the correct answer. I am willing to give MAX karma points to anyone who can help me through this. Thank you kindly.

Answers

Answer:

The speed of proton is 2.1 x 10^5 m/s .

Explanation:

potential difference, V = 234 V

let the initial speed of the proton is v.

The kinetic energy of proton is

KE = q V

[tex]0.5 mv^2 = e V \\\\0.5\times 1.67\times 10^{-27} v^2 = 1.6\times 10^{-19} \times 234\\\\v=2.1\times 10^5 m/s[/tex]

Outside a spherically symmetric charge distribution of net charge Q, Gauss's law can be used to show that the electric field at a given distance:___________.
A) must be directed inward.
B) acts like it originated in a point charge Q at the center of the distribution.
C) must be directed outward.
D) must be greater than zero.
E) must be zero.

Answers

Answer:

Q at the center of the distribution.

Explanation:

The Gauss's law is the law that relates to the distribution of electrical charges to the resulting electrical field. It states that a flux of electricity outside the arabatory closed surface is proportional to the electricitical harg enclosed by the surface.

A 55kg bungee jumper has fallen far enough that her bungee cord is beginning to stretch and resist her downward motion . Find the ( magnitude and direction ) exerted on her by the bungee cord at an instant when her downward acceleration has a magnitude of 7.1m/s2​

Answers

Answer:

148.5 N

Explanation:

Given that,

The mass of a bungee jumper, m = 55 kg

The downward acceleration, a = 7.1 m/s²

We need to find the net force acting on the jumper. As it is moving in downward direction, net force is :

T = m(g-a)

Put all the values,

T = 55(9.8 - 7.1)

= 148.5 N

So, the force exerted on the bungee cord is 148.5  N.

Answer:

The downward force is 148.5 N.

Explanation:

mass, m = 55 kg

downwards acceleration, a = 7.1 m/s^2

Let the force is F.

According to the newton's second law

m g - F = m a

F = m (g - a)

F = 55 (9.8 - 7.1)

F = 148.5 N

a person lifts 60kg on the surface of the earth, how much mass can he lift on the surface of the moon if he applies same magnitude of force​

Answers

Explanation:

Hey there!

According to the question;

A person can lift mass of 60 kg on earth.

mass(m1) = 60kg

acceleration due to gravity on earth (a) = 9.8m/s²

Now;

force (f) = m.a

= 60*9.8

= 588 N

Since, there is application of same magnitude of force on moon,

mass(m) =?

acceleration due to gravity on moon (a) = 1.67m/s²

Now;

force (f) = m.a

588 = m*1.67

m = 352.09 kg

Therefore, the person who can lift the mass of 60 kg on earth can lift mass of 352 kg on moon.

Hope it helps!

given A=4i-10j and B= 7i+5j find b such that A+bB is a vector pointing along the x-axis (i.e has no y component)​

Answers

Answer:

-4/7

Explanation:

Given the following

A=4i-10j and B= 7i+5j

A+ bB = 4i-10j + (7i+5j)b

A+ bB =  4i-10j + 7ib+5jb

A+ bB =

The vector along the x-axis is expressed as i + 0j

If the vector A+ bB is pointing in the direction of the x-axis then;

[tex]A+ bB * \frac{i+0j}{|i+0j|} = 0 \\ (4+7b)i-(10-5b)j* \frac{i+0j}{\sqrt{1^2+0^2} } = 0\\(4+7b)i-(10-5b)j *(i+0j) = 0\\4+7b-0 =0\\7b=-4\\b = -4/7[/tex]

Hence the value of b is -4/7

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

According to the statement, we have following system of vectorial equations:

[tex]\vec A = 4\,\hat {i} - 10\,\hat{j}[/tex] (1)

[tex]\vec {B} = 7\,\hat{i} + 5\,\hat{j}[/tex] (2)

[tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] (3)

By applying (1) and (2) in (3):

[tex](4\,\hat{i}-10\,\hat{j}) + \beta\cdot (7\,\hat{i}+5\,\hat{j}) = c\,\hat{i}[/tex]

[tex](4+7\cdot \beta)\,\hat{i} +(-10+5\cdot \beta)\,\hat{j} = c\,\hat{i}[/tex]

And we get two scalar equations after analyzing each component:

[tex]4+7\cdot \beta = c[/tex] (4)

[tex]-10+5\cdot \beta = 0[/tex] (5)

We solve for [tex]\beta[/tex] in (5):

[tex]\beta = 2[/tex]

And for [tex]c[/tex] in (4):

[tex]c = 4+7\cdot (2)[/tex]

[tex]c = 18[/tex]

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

Please see this question related to Sum of Vectors for further details: https://brainly.com/question/11881720

A physical pendulum in the form of a planar object moves in simple harmonic motion with a frequency of 0.680 Hz. The pendulum has a mass of 2.00 kg, and the pivot is located 0.340 m from the center of mass. Determine the moment of inertia of the pendulum about the pivot point.

Answers

Answer:

Therefore, the moment of inertia is:

[tex]I=0.37 \: kgm^{2} [/tex]

Explanation:

The period of an oscillation equation of a solid pendulum is given by:

[tex]T=2\pi \sqrt{\frac{I}{Mgd}}[/tex] (1)

Where:

I is the moment of inertiaM is the mass of the pendulumd is the distance from the center of mass to the pivotg is the gravity

Let's solve the equation (1) for I

[tex]T=2\pi \sqrt{\frac{I}{Mgd}}[/tex]

[tex]I=Mgd(\frac{T}{2\pi})^{2}[/tex]

Before find I, we need to remember that

[tex]T = \frac{1}{f}=\frac{1}{0.680}=1.47\: s[/tex]

Now, the moment of inertia will be:

[tex]I=2*9.81*0.340(\frac{1.47}{2\pi})^{2}[/tex]  

Therefore, the moment of inertia is:

[tex]I=0.37 \: kgm^{2} [/tex]

I hope it helps you!

A light bulb, attached (by itself) to an ideal 10 V battery, becomes hotter as time goes on. The bulb's filament is made of tungsten, a metal, which becomes more resistive as its temperature increases. Which statement below is true?

a. As time goes on and the bulb grows hotter, the voltage across the bulb increases so the bulb would grow brighter.
b. As time goes on and the bulb grows hotter, the current through the bulb increases so the bulb would grow brighter.
c. As time goes on and the bulb grows hotter, the voltage across the bulb decreases so the bulb would grow dimmer.
d. As time goes on and the bulb grows hotter, the current through the bulb decreases so the bulb would grow dimmer.

Answers

Answer:

the correct one is d

Explanation:

The filament of the bulb fulfills the law of ohm

          V = i R

indicate that the filament resistance increases with temperature, as the voltage remains constant if the resistance of the filament increases the current should decrease,

When examining the different statements, the correct one is d

what is meant by specific latent heat of vaporization of water is -2.26mjkg^-1 or -2.26mj/kg?​

Answers

Answer:

The specific latent heat of a substance is the amount of energy required to change the state of one kilo of the substance without change in it temperature.The latent heat of vaporization or evaporation is the heat given to some mass to convert if from the liquid to the vapor phase.

A magnifying glass produces a maximum angular magnification of 5.4 when used by a young person with a near point of 20 cm. What is the maximum angular magnification obtained by an older person with a near point of 65 cm

Answers

67 points to the 55th power add it then you get exactly 1500

how much is need to lift a load of 100n placed at a distance of 29 cm from fulcrum if effort is applied at 60cm from the fulcrum on opposite side of the load? calculate mechanical advantage and velocity ratio of the lever​

Answers

Answer:

206.8965517 n

Explanation:

First, we need to see that 60:29 is 2.078965517:1. Then we need to multiply the energy put 29 cm from the fulcrum by 2.078965517, giving us the end result of our answer.

a student standing between two walls shouts once.he hears the first echo after 3 seconds and the next after 5 seconds. calculate the distance between the walls.​

Answers

Explanation:

It took [tex]t_1 =1.5\:\text{s}[/tex] for the sound to reach the 1st wall and at the same time time, the same sound took [tex]t_2 = 2.5\:\text{s}[/tex] to reach the 2nd wall. Assuming that the sound travels at 343 m/s, then let [tex]x_1[/tex] be the distance of the person to the 1st wall and [tex]x_2[/tex] be the distance to the 2nd wall. So the distance between the walls X is

[tex]X = x_1 + x_2 = v_st_1 + v_st_2 = v_s(t_1 + t_2)[/tex]

[tex]\:\:\:\:\:= (343\:\text{m/s})(4.0\:\text{s}) = 1372\:\text{m}[/tex]

An observer on Earth sees rocket 1 leave Earth and travel toward Planet X at 0.3c. The observer on Earth also sees that Planet X is stationary. An observer on Planet X sees rocket 2 travel toward Earth at 0.4c. What is the speed of rocket 1 according to an observer on rocket 2?

Answers

Answer:

0.625 c

Explanation:

Relative speed of a body may be defined as the speed of one body with respect to some other or the speed of one body in comparison to the speed of second body.

In the context,

The relative speed of body 2 with respect to body 1 can be expressed as :

[tex]$u'=\frac{u-v}{1-\frac{uv}{c^2}}$[/tex]

Speed of rocket 1 with respect to rocket 2 :

[tex]$u' = \frac{0.4 c- (-0.3 c)}{1-\frac{(0.4 c)(-0.3 c)}{c^2}}$[/tex]

[tex]$u' = \frac{0.7 c}{1.12}$[/tex]

[tex]u'=0.625 c[/tex]

Therefore, the speed of rocket 1 according to an observer on rocket 2 is 0.625 c

A 2.0 kg puck is at rest on a level table. It is pushed straight north with a constant force of 5N for 1.50 s and then let go. How far does the puck move from rest in 2.25 s?

Answers

Answer:

d = 6.32 m

Explanation:

Given that,

The mass of a puck, m = 2 kg

It is pushed straight north with a constant force of 5N for 1.50 s and then let go.

We need to find the distance covered by the puck when move from rest in 2.25 s.

We know that,

F = ma

[tex]a=\dfrac{F}{m}\\\\a=\dfrac{5}{2}\\\\a=2.5\ m/s^2[/tex]

Let d is the distance moved in 2.25 s. Using second equation of motion,

[tex]d=ut+\dfrac{1}{2}at^2\\\\d=0+\dfrac{1}{2}\times 2.5\times (2.25)^2\\\\d=6.32\ m[/tex]

So, it will move 6.32 m from rest in 2.25 seconds.

During normal beating, the heart creates a maximum 4.10-mV potential across 0.350 m of a person's chest, creating a 1.00-Hz electromagnetic wave. (a) What is the maximum electric field strength created? V/m (b) What is the corresponding maximum magnetic field strength in the electromagnetic wave? T (c) What is the wavelength of the electromagnetic wave?

Answers

Explanation:

Given that,

Maximum potential, V = 4. mV

Distance, d = 0.350 m

Frequency of the wave, f = 100 Hz

(a) The maximum electric field strength created is given by:

[tex]E=\dfrac{V}{d}\\\\E=\dfrac{4.1\times 10^{-3}}{0.350 }\\\\E=0.0117\ V/m[/tex]

(b) The corresponding maximum magnetic field strength in the electromagnetic wave is given by :

[tex]B=\dfrac{E}{c}\\\\B=\dfrac{0.0117}{3\times 10^8}\\\\B=3.9\times 10^{-11}\ T[/tex]

(c) The wavelength of the electromagnetic wave can be calculated as :

[tex]\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{100}\\\\=3\times 10^6\ m[/tex]

So, the wavelength of the electromagnetic wave is [tex]3\times 10^6\ m[/tex].

Four identical balls are thrown from the top of a cliff, each with the same speed. The
first is thrown straight up, the second is thrown at 30° above the horizontal, the third
at 30° below the horizontal, and the fourth straight down. How do the speeds and
kinetic energies of the balls compare as they strike the ground? Ignore the effects of
air resistance. Explain fully using the concepts from this unit.

Answers

The comparison of the speeds and kinetic energy of the identical balls are as follows

The speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

The reason for the above comparison results areas follows;

Known parameters;

First ball is thrown straight up

Second ball is thrown 30° above the horizontal

Third ball it thrown 30° below the horizontal

The fourth ball is thrown straight down

Unknown:

Comparison of the speed and kinetic energy of the four balls

Method:

The kinetic energy, K.E. = (1/2) × m × v²

The velocity of the ball, v = u × sin(θ)

Where;

u = The initial velocity of the ball

θ = The reference angle

For the first ball thrown straight up, we have;

θ = 90°

∴ [tex]v_y[/tex] = u

The final velocity of the ball as it strikes the ground is v₂ = u² + 2gh

Where;

h = The height of the cliff

∴ Kinetic energy of first ball, K.E.₁ = (1/2) × m × (u₁² + 2gh)²

For the second ball thrown 30° to the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy  K.E.₂ = (1/2) × m × ((0.5·u₂)² + 2·g·h)²

For the third ball thrown at 30° below the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy K.E.₃ = (1/2) × m × ((0.5·u₃)² + 2·g·h)²

For the fourth ball thrown straight down, we have;

Kinetic energy K.E.₄ = (1/2) × m × (u₄² + 2gh)²

Therefore, as the ball strike the ground, the speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

u₁ = u₄, K.E₁ = K.E.₄, u₂ = u₃, K.E₂ = K.E.₃

Learn more about object kinetic energy of objects in free fall here;

https://brainly.com/question/14872097

Flag question
Consider the pressure and force acting on the
dam retaining a reservoir of water. Suppose the
dam is 500-m wide
and the water is 80.0-m
deep at the dam, as illustrated below. What is
the average pressure on the dam due to the
water?​

Answers

Answer:

P = density (p) * g * h

P = 1000  kg/m^3 * 9.8 m/s^2 * 40 m = 392,000 N/m^2

since kg m / s^2 = Newtons

The average pressure is 1/2 (pressure at 0m +  pressure 80 m) for liquid of uniform density

a method of reducing friction​

Answers

Answer:

Lubrication

Explanation:

People oil/lubricate bicycle chains because the chain turns around the cogs and rub together so this help with friction.

Hope this helps :)

Answer:

The method of reducing friction are :

i) In moving parts of machine friction can be reduced by using a ball bearing between the moving surfaces

ii) The bodies of aeroplane ,ship ,boat etc are made streamlined to reduce friction.

iii) Friction can be reduced by polishing rough surfaces. For example : carrom boards are highly polished to reduce friction.

I hope this help you:)

An object moving with a constant
acceleration changes its velocity from
10ms' to 20 ms' in five seconds. What is the
distance travelled in five seconds ​

Answers

Answer:

Acceleration:

[tex]{ \tt{a = \frac{v - u}{t} }} \\ { \tt{a = \frac{20 - 10}{5} }} \\ { \tt{a = 2 \: m {s}^{ - 2} }}[/tex]

From third equation:

[tex]{ \bf{ {v}^{2} = {u}^{2} + 2as}} \\ { \tt{s = \frac{ {20}^{2} - {10}^{2} }{2 \times 2} }} \\ = { \tt{s = 75 \: m}}[/tex]

Answer:

Formula = m/s

Explanation:

The answer is 10 m / 5 seconds = 2 meters distance

The answer is 20 m / 5 seconds = 4 meters distance

a coach is travelling east wards at 12.6 m/s after 12 second its velocity is 9.5 m/s in the same direction. what is the acceleration and direction of its acceleration?

pls do it with the formula
thx mates :)​

Answers

Initial velocity=u=12.6m/sFinal velocity=9.5m/sTime=t=12sAcceleration be a

[tex]\\ \rm\longmapsto a=\dfrac{v-u}{t}[/tex]

[tex]\\ \rm\longmapsto a=\dfrac{12.6-9.5}{12}[/tex]

[tex]\\ \rm\longmapsto a=\dfrac{3.1}{12}[/tex]

[tex]\\ \rm\longmapsto \overrightarrow{a}=0.25m/s^2[/tex]

A parallel plate capacitor creates a uniform electric field of and its plates are separated by . A proton is placed at rest next to the positive plate and then released and moves toward the negative plate. When the proton arrives at the negative plate, what is its speed

Answers

Complete Question

A parallel plate capacitor creates a uniform electric field of 5 x 10^4 N/C and its plates are separated by 2 x 10^{-3}'m. A proton is placed at rest next to the positive plate and then released and moves toward the negative plate. When the proton arrives at the negative plate, what is its speed?

Answer:

[tex]V=1.4*10^5m/s[/tex]

Explanation:

From the question we are told that:

Electric field [tex]B=1.5*10N/C[/tex]

Distance [tex]d=2 x 10^{-3}[/tex]

At negative plate

Generally the equation for Velocity is mathematically given by

[tex]V^2=2as[/tex]

Therefore

[tex]V^2=\frac{2*e_0E*d}{m}[/tex]

[tex]V^2=\frac{2*1.6*10^{-19}(5*10^4)*2 * 10^{-3}}{1.67*10^{-28}}[/tex]

[tex]V=\sqrt{19.2*10^9}[/tex]

[tex]V=1.4*10^5m/s[/tex]

A scientist who studies the tiny microorganisms of the environment .

geologist
meteorologist
microbiologist
entomologist

Answers

Question:- A scientist who studies the tiny microorganisms of the environment

Answer:- Microbiologist

Explanation:-

Microbiologist means a person who studies micro sized living organisms

Microbiologist word is combination of two words Micro and biologist

Micro stands for objects which cannot be seen with the naked eyes and are very small in sizeBiologist a person who studies living forms.

Answer:

microbiologist i think

hope it helps

please mark Brainliest if you think the answer is correct

A gymnast weighs 450 N. She stands on a balance beam of uniform construction which weighs 250 N. The balance beam is 3.0 m long and is supported at each end. If the support force at the right end is four times the force at the left end, how far from the right end is the gymnast

Answers

Answer:

   x = 9.32 cm

Explanation:

For this exercise we have an applied torque and the bar is in equilibrium, which is why we use the endowment equilibrium equation

Suppose the counterclockwise turn is positive, let's set our reference frame at the left end of the bar

          - W l / 2 - W_{child} x + N₂ l = 0

             x = [tex]\frac{-W l/2 + n_2 l}{W_{child}}[/tex]             1)

now let's use the expression for translational equilibrium

         N₁ - W - W_(child) + N₂ = 0

indicate that N₂ = 4 N₁

we substitute

           N₁ - W - W_child + 4 N₁ = 0

           5 N₁ -W - W_{child} = 0

           N₁ = ( W + W_{child}) / 5

         

we calculate

           N₁ = (450 + 250) / 5

          N₁ = 140 N

           

we calculate with equation 1

           x = -250 1.50 + 4 140 3) / 140

           x = 9.32 cm

An object is acted upon by two and only two forces that are equal magnitude and oppositely directed. Is the objected necessarily in static equilibrium? Explain. You can draw a picture if that helps explain.

Answers

Answer:

the body is subjected to a continuous rotation and the body is not in rotational equilibrium

Explanation:

For an object to have a static equilibrium, it must meet two relationships

             ∑ F = 0

             ∑ τ =0              

force acting on a body fulfills the relation of

         sum F = F - F = 0

when two forces do not move from position.

To find the torque we assume that the counterclockwise rotations are positive

        Σ τ = - F r - F r

        Στ = -2 Fr <> 0

consequently the body is subjected to a continuous rotation and the body is not in rotational equilibrium

A mysterious constant force of 10 N acts horizontally on everything. The direction of the force is found to be always pointed toward a wall in a big hall. Find the potential energy of a particle due to this force when it is at a distance x from the wall, assuming the potential energy at the wall to be zero.

Answers

Answer:

it will be 10x

Explanation:

workdone(potential energy before it hits the wall)= horizontal force × distance

=10× x = 10x joules

A mysterious constant force of 10 N acts horizontally on everything. The direction of the force is found to be always pointed toward a wall in a big hall.The potential energy of a particle due to this force is  10x.

What is force?

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Given in the question a mysterious constant force of 10 N acts horizontally on everything. The direction of the force is found to be always pointed toward a wall in a big hall the potential energy,

Work done (potential energy before it hits the wall)

= horizontal force × distance

=10× x = 10x joules

The potential energy of a particle due to this force is  10x.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2


How is the sun used to make food?

Answers

Answer:

Plants use a process called photosynthesis to make food. During photosynthesis, plants trap light energy with their leaves. Plants use the energy of the sun to change water and carbon dioxide into a sugar called glucose. Glucose is used by plants for energy and to make other substances like cellulose and starch.

                                             Thank you

Answer:

Plants use a process called photosynthesis to make food. During photosynthesis, plants trap light energy with their leaves. Plants use the energy of the sun to change water and carbon dioxide into a sugar called glucose.

If the mass of an object is 15 kg and the velocity is -4 m/s, what is the momentum?

Answers

momentum p= m x v = 15 x -4 = -60 N.s


The temperature of a body falls from 30°C to 20°C in 5 minutes. The air
temperature is 13°C. Find the temperature after a further 5 minutes.

Answers

Answer:

15.88°C I am not 100% sure this is right but I am 98% sure this IS right

Our system is a block attached to a horizontal spring on a frictionless table. The spring has a spring constant of 4.0 N/m and a rest length of 1.0 m, and the block has a mass of 0.25 kg.

Compute the PE when the spring is compressed by 0.50 m.

Answers

Answer

E - 1/2 K x^2      potential energy of compressed spring

E = 1/2 * 4 N / m * (.5 m)^2 = 2 * .5^2 N-m = .5 N-m

Other Questions
Mark invests $8,008 in a retirement account with a fixed annual interest rate of 2% compounded 6 times per year. What will the account balance be after 16 years?Please help i need the answer by tomorrow! "Mom took the cookies out of the oven and placed them on the counter to cool." Based on the context of thissentence, what does "cool" mean?A. An adjective meaning slightly coldAn adjective meaning interesting or excitingA verb meaning to become less hotAn adjective meaning relaxed Cul es la Ley que expide el cdigo Nacional de Trnsito Terrestre? plants make glucose using energy from the sun and two molecules. which two molecules do they use ? 9Drag each label to the correct location.Identify each item as a cause or an effect of imperialism in Southeast Asia,Locals suffered in poverty,Westen nations grew richer byExploidng colonized nations,Western nations wanted to profitfrom weaker, resource-rich nations,Internal conflicts arose becauseof diverse communities living ina single nation,Cause of ImperialismEffect of Imperialism Which is an example of a word root?O istartizere Lisa reads an equal number of pages of a book every week. The graph below shows the number of pages of the book left to read, y, after x weeks:A graph titled Lisas Book Reading shows Number of Weeks on the x-axis and Number of Pages Left on the y-axis. The scale on the x-axis shows numbers from 0 to 6 at increments of 1, and the scale on the y-axis shows numbers from 0 to 350 at increments of 50. A straight line joins the ordered pairs 0, 250 and 1, 200 and 2, 150 and 3, 100 and 4, 50 and 5, 0.Which equation best models the relationship between x and y? y = 50x + 250 y = 5x + 50 y = 50x + 350 y = 5x + 250 The following information is available for the first month of operations of Bahadir Company, a manufacturer of mechanical pencils: Sales $278,670 Gross profit 162,460 Cost of goods manufactured 139,340 Indirect labor 60,470 Factory depreciation 9,200 Materials purchased 85,830 Total manufacturing costs for the period 160,240 Materials inventory, ending 11,430Using the above information, determine the following missing amounts a. Cost of goods sold b. Finished goods inventory at the end of the month c. Direct materials cost d. Direct labor cost e. Work in process inventory at the end of the month Select all the adjectives in the sentence. Do not include articles.This story is an unusual one.oneThisanstoryisunusual 1. 2. 3. 4. 5. Correct answer =thanksBest answer=brainliestRandom answers or unexplained answers=reportedBe careful while giving answers answer if you know otherwise don't Use the functions below to complete Parts 1 and 2.f(x)= |x| g(x)= |x+2| - 3Part 1: Graph f(x) and g(x) on the grid below. Label each graph. HINT: Making a table of values for each function may help you to graph them.Part 2: describe how the graph of g(x) relates to the graph of its parent function, f(x).HINT: Think about how f(x) was shifted to get g(x). HELPPPPPPPPPPP PLSSSSSSSSSSSSS Imagine that there is a mutation in the cyclin gene such that its gene product is nonfunctional. What kind of effect would this mutation have on a skin cell in the area of a cut Identify three professional nursing organizations that interest you. Provide a brief summary of their purpose, requirements, and any differences in focus, population, scope, or intent. How do these organizations align to your goals and worldview? Please help me asap! I dont understand Minstrel Manufacturing uses a job order costing system. During one month, Minstrel purchased $212,400 of raw materials on credit; issued materials to production of $207,000 of which $33,600 were indirect. Minstrel incurred a factory payroll of $157,200, of which $43,600 was indirect labor. Minstrel uses a predetermined overhead application rate of 150% of direct labor cost. Minstrel's beginning and ending Work in Process Inventory are $16,700 and $29,400 respectively. Compute the cost of jobs transferred to Finished Goods Inventory. HELPPPPPWhat column do you add to an Everything-l-Know chart to make it a Quad-Entry diary?O A. What would happen if...?B. My OpinionO C. What I Found OutO D. Connections The market shares of the top five firms in the dishware industry are 18%, 32%, 11%, 14%, and 8%. What is the four-firm concentration ratio for the dishware industry Please help me find this angle Explain how you can find the constant of proportionality from a graph representing a proportional relationship when it shows a point with an x - value of 1 and if it doesn't show an x - value of 1 .