A calorimeter measures the heat involved in reactions or other processes by measuring the temperature change of the materials ________ the process The calorimeter is_______ to prevent transfer of heat to outside the device A calorimeter measures the heat involved in reactions or other processes by measuring the temperature change 01 the process the materials _______. _______ produced by The calorimetelinvolved in surrounding to prevent transfer of heat to outside the device. A calorimeter measures the heat involved in reactions or other processes by measuring the temperature change of the materials _______ the process to prevent transfer of heat to outside the device. The calorimeter is _____ _______Insulated conductive left open V A calorimeter measures the heat involved in reactions or other processes by measuring the temperature change _______ the materials ______ SS moles mass heat The calorimeter is _______comprevent transfer of heat to outside the device of A calorimeter measures the heat involved in reactions or other processes by measuring the temperature chang- ______ the materials _______ the process mass gain enthalpy change temperature change The calorimeter is ________... to prevent transfer of heat to outside the device
Complete Question:
A calorimeter measures the heat involved in reactions or other processes by measuring the ______ of the materials _____ the process. The calorimeter is _______ to prevent transfer of heat to outside the device.
Answer:
Temperature; surrounding; insulated.
Explanation:
A calorimeter can be defined as a scientific instrument or device designed and developed for measuring the heat involved in reactions or other processes, especially by taking the measurement of the temperature of the materials surrounding the process.
Basically, a calorimeter is insulated using materials with very high level of resistivity so as to prevent heat transfer to the outside of the device (calorimeter). Some of the components that make up a simple calorimeter are thermometer, an interior styrofoam cup, an exterior styrofoam cup, cover, etc.
Additionally, a calorie refers to the amount of heat required to raise the temperature of a gram of water by one degree Celsius (°C).
Answer:
Temperature; surrounding; insulated.
Explanation:
A calorimeter measures the heat involved in reactions or other processes by measuring the Temperature of the materials surrounding the process. The calorimeter is insulated to prevent the transfer of heat outside the device.
A molecular compound has the following empirical formula: CH2O. The molar mass of the empirical formula is g. Write your answer using 3 significant figures. If the molar mass of the molecular compound is 180.0 g/mol, write the molecular formula of the compound.
Answer:
Empirical formula has a molar mass of 30.01g/mol and molecular formula is C₆H₁₂O₆
Explanation:
Molar mass of a molecule is the sum of the molar mass of each atom. In CH2O we have:
1C = 1*12.01g/mol = 12.01g/mol
2H = 2*1g/mol = 2g/mol
1O = 1*16g/mol = 16g/mol
Empirical formula of CH2O is:
12.01g/mol + 2g/mol + 16g/mol = 30.01g/mol
As the molecular compound has a molar mass of 180.0g/mol the molecular formula is:
180.0g/mol / 30.01g/mol = 6 times the empirical formula. That is:
C₆H₁₂O₆please help! what is the correct answer to this picture
Answer:
i think its c [everything is so blury]
Explanation:
Which event is an example of melting?
A. Wax drips down the side of a lit candle.
B. Perspiration dries on a person's skin.
C. Rain turns to ice pellets.
D. A mirror fogs up when someone takes a hot shower.
I’m just curious tbh
Answer:
A. Wax drips down the side of a lot candle.
Explanation:
The chemical change from solid to liquid. This is a combustion reaction, so carbon dioxide gas and water vapour is also produced but you can't see them
Answer:
A. Wax drips down the side of a lot candle.
Explanation:
What is the pCu of the resulting solution if 20.00 mL of 0.08 M EDTA (H4Y) is added to 15.00 mL of 0.10 M CuSO4 and buffered at pH 10? The Kf’ for complex CuY2- is 2.21 x 1018
Answer:
The answer is "5.4".
Explanation:
[tex]BoH + HCL =BCL +H_2o \\\\At eq \\\\N_1V_1=N_2V_2 \\\\v_2=20 \ ml\\\\[BCL]=\frac{20 \times 0.08}{20+20}=0.04\\\\pH = \frac{1}{2} [pkw - pk_b - \log e]\\\\pk_b = 2 pH - Pkw + \Log C\\\\pK_b=5.4[/tex]
Kolbe's reaction with an example
Answer:
∵
Explanation:
How many moles of water are produced if 3.30 moles of N20 is
produced? NH4NO3 --> N20 + 2 H2O (mole to mole conversion) 1 step
Answer:
The netto reaction equation is:
2 OH- + 2H+ = 2 H2O
So the answer is 2 moles.
For each molecule, specify the polarity of the bonds and the overall polarity of the molecule.
a. BeCl2
b. H2O
c. O3
En una práctica experimental, para la obtención de cloruro cobaltoso, se hacen reaccionar 120 g de sulfuro cobaltoso de 60% de pureza con 30 cm3 de ácido nítrico concentrado (densidad 1,142 g/cm3, 69,8% en peso de HNO3), en presencia de ácido clorhídrico concentrado (densidad 1,19 g/cm3, 37,33 % en peso de HCl). Calcular:
a) El volumen de ácido clorhídrico concentrado que se requiere para la reacción.
b) La cantidad máxima de cloruro de cobalto (II) que se puede preparar.
c) El número de moléculas de monóxido de nitrógeno que se deprenden.
d) El número de átomos de azufre que se forman.
e) El número de moles de agua que se obtiene.
CoS + HNO3 + HCl → CoCl2 + NO + S + H2O
Answer: D
Explanation:
Utilicé traductor de español para responder esta pregunta
Bacteria produce methane gas in sewage-treatment plants.This gas is often captured or burned. If a bacterial culture produces 60.0 mL of methane gas at 700.0 mmHg, at what pressure would the bacteria be able to produce 55.0 mL of gas? What law did you use to solve
Answer:
764mmHg
Boyle's law
Explanation:
Step 1: Given data
Initial volume (V₁): 60.0 mLInitial pressure (P₁): 700.0 mmHgFinal volume (V₂): 55.0 mLFinal pressure (P₂): ?Step 2: Calculate the final volume of methane gas
If we assume constant temperature and ideal behavior, we can calculate the final volume of methane gas using Boyle's law.
P₁ × V₁ = P₂ × V₂
P₂ = P₁ × V₁/V₂
P₂ = 700.0 mmHg × 60.0 mL/55.0 mL = 764mmHg
The seagulls on the beach -
A solution of acetic acid that has a concentration of 0.10 moles per liter has a pH of 2.87. What is the likely pH of a 0.10 mole per liter solution of the conjugate base sodium acetate?
A. 8.97
B. 1.00
C. 2.87
D. 4.74
E. 13.00
Answer: The correct option is A) 8.97
Explanation:
To calculate the [tex]K_b[/tex] of a reaction, we use the equation:
[tex]K_a\times K_b=10^{-14}[/tex]
where,
[tex]K_a[/tex] = acid dissociation constant of acetic acid = [tex]1.86\times 10^{-5}[/tex]
[tex]K_b[/tex] = base dissociation constant
Putting values in above equation, we get:
[tex](1.86\times 10^{-5})\times K_b=10^{-14}\\\\K_b=\frac{10^{-14}}{1.86\times 10^{-5}}=5.37\times 10^{-10}[/tex]
To calculate the hydroxide ion concentration of conjugate base, we use the equation:
[tex][OH^-]=\sqrt{K_b\times \text{[Conjugate base]}}[/tex]
where,
[Conjugate base] = 0.10 M
Putting values in above equation, we get:
[tex][OH^-]=\sqrt{(5.37\times 10^{-10})\times 0.1}[/tex]
[tex][OH^-]=7.33\times 10^{-6}[/tex]
To calculate the pOH of the solution, we use the equation:
[tex]pOH=-\log [OH^-][/tex]
[tex]pOH=-\log (7.33\times 10^{-6})[/tex]
[tex]pOH=5.03[/tex]
To calculate the pH of the solution, we use the equation:
pH + pOH = 14
pH + 5.03 = 14
pH = (14 - 5.03) = 8.97
Hence, the correct option is A) 8.97
PLZZZZZZZZ HELPPPPPP
Answer:
482
Explanation:
Using the following equation how many grams of water you would get from 886 g of glucose:
C6H12O6 + 6O2 → 6CO2 + 6H2O + energy
Answer:
531.6g
Explanation:
Total moles of glucose in this case is: 886/180= 4.922 (mole)
For every 1 mole glucose we get 6 mole water
-> Mole of water is: 4.922 * 6= 29.533 (mole)
weight of water is 18. Therefore, total weight of water that we will have from 886g of glucose are: 25.933*18= 531.6g
What would happen to the pressure of a closed sample of gas whose temperature increased while its volume decreased? Explain your reasoning in terms of the kinetic molecular theory of gases.
Answer:
As the temperature increases, the average kinetic energy increases as does the velocity of the gas particles hitting the walls of the container. The force exerted by the particles per unit of area on the container is the pressure, so as the temperature increases the pressure must also increase.
I hope this will help you if not soo sorry :)
Dugongs are animals that live in the ocean and eat underwater grasses. The sun is shining on the shallow ocean water where the grasses and dugongs live.
What is happening to the carbon in the water around the grasses and the dugongs? Is carbon moving into the water, moving out of the water, or both?
Answer:
please mark as brainliest
Explanation:
The sun is shining on the shallow ocean water where the grasses and dugongs live. What is happening to the carbon in the water around the grasses and the dugongs? Is carbon moving into the water, moving out of the water, or both? Carbon is not moving into the water; it is only moving out of the water.
heating, the particle _______________ increases as more __________ __________ is added
Answer: what are the choices?!.
Explanation:
Consider the following reaction at 298 K.
2 SO2(g) + O2(g) → 2 SO3(g)
An equilibrium mixture contains O2(g) and SO3(g) at partial pressures of 0.43 atm and 2.6 atm, respectively. Using data from Appendix 4, determine the equilibrium partial pressure of SO2 in the mixture.
______atm.
Answer and Explanation:
The reaction is in the gas phase, so the equilibrium constant is expressed in terms of the partial pressures (P) of the products and reactants, as follows:
[tex]Kp = \frac{P^{2}_{SO_{3} } }{P_{SO_{2}} ^{2}P_{O_{2}} }[/tex]
We have the following data:
P(SO₃) = 2.6 atm
P(O₂) = 0.43 atm
We need Kp for this reaction. We can assume that in Appendix 4 we found that Kp = 7 x 10²⁴.
Then, we introduce the data in the equilibrium constant expression to calculate the partial pressure f SO₂ (PSO₂), as follows:
[tex]P_{SO_{2} } = \sqrt{\frac{P_{SO_{3} } ^{2} }{Kp P_{O_{2} } } } = \sqrt{\frac{(2.6 atm)^{2} }{(7 x 10^{24)}(0.43 atm) } } = 1.5 x 10^{-12} atm[/tex]
Therefore, the partial pressure of SO₂ is 1.5 x 10⁻¹² atm (for the given Kp).
Arrange the forms of electromagnetic radiation in order of decreasing energy (from highest energy to lowest energy). You are currently in a ranking module. Turn off browse mode or quick nav, Tab to move, Space or Enter to pick up, Tab to move items between bins, Arrow Keys to change the order of items, Space or Enter to drop.
highest energy lowest energy
radio waves
x rays
gamma rays
infrared
microwaves
ultraviolet
visible
Answer:
gamma rays > X-rays > ultraviolet radiation > visible light > infrared > radio waves.
Explanation:
Electromagnetic waves are those waves that require no material medium for propagation. They can travel through space and they all move at the speed of light.
Electromagnetic waves are composed of both electric and magnetic fields which are mutually at right angles to each other.
The order of decreasing energy of electromagnetic waves is;
gamma rays > X-rays > ultraviolet radiation > visible light > infrared > radio waves.
When separating benzoic acid, naphthalene, and 3-nitroaniline, identify the solution used for each described purpose.
a. Extract reconstituted 3-nitroaniline out of the aqueous layer ___________
b. Extract benzoic acid into the aqueous layer _____________
c. Extract aniline into the aqueous layer ___________
d. Reconstitute aniline from aqueous layer__________
Answer:
a. Extract reconstituted 3-nitroaniline out of the aqueous layer: Dichloromethane.
b. Extract benzoic acid into the aqueous layer: 5% NaOH.
c. Extract aniline into the aqueous layer: 5% HCl.
d. Reconstitute aniline from aqueous layer: 6M NaOH.
Explanation:
Each of the answers is explained as follows:
a. Extract reconstituted 3-nitroaniline out of the aqueous layer: Dichloromethane.
Dichloromethane is an organochloride chemical and CH2Cl2 is its formula. It is commonly employed as a solvent since it is a colorless, volatile liquid with a sweet, chloroform-like odor. It is polar and miscible with numerous organic solvents, despite not being miscible with water.
b. Extract benzoic acid into the aqueous layer: 5% NaOH.
According to the Mass by Volume percentage concept, 5% NaOH solution (W/V) indicates 5g of NaOH dissolved in 100ml of water.
c. Extract aniline into the aqueous layer: 5% HCl.
Hydrochloric acid (HCl) is a common acid found in the human body as well as in laboratories, and it is a key component of stomach acid.
As a result, 5% HCl solution is made by mixing 8.26 mL concentrated HCl with roughly 50 mL distilled water, stirring well, and then adding water up to 100 mL.
d. Reconstitute aniline from aqueous layer: 6M NaOH.
6M NaOH refer to 6 moles in 1L MW (NaOH). Therefore, 6 moles of NaOH are dissolved in 1 liter of H2O to make a 6M NaOH solution. Because NaOH has a molar mass of 39.9997 g/mol, we'll need 240 g NaOH (39.997 x 6) in 1L of H2O to make a 6M solution.
5 compounds that has electrovalent and covalent bond
Answer:
electrovalent
NaCl
Lithium Carbonate
ammonium phosphate
aluminium floride
potassium hydride
covalent
methane
benzene
carbon iv oxide
hydro flouride
hydro chloride
Which of the following aqueous solutions are good buffer systems?
a. 0.34 M calcium iodide + 0.22 M sodium iodide.
b. 0.27 M ammonia + 0.38 M ammonium nitrate.
c. 0.27 M nitric acid + 0.18 M sodium nitrate.
d. 0.18 M hydrofluoric acid + 0.14 M hydroiodic acid.
e. 0.14 M calcium hydroxide + 0.28 M calcium chloride.
Answer:
b. 0.27 M ammonia + 0.38 M ammonium nitrate.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to bear to mind the fact that buffest must be prepared by using either of the following pairs:
weak acid/conjugate base
weak base/conjugate acid
So that the pH might be set constant. In such a way, since a. shows two salts, c. a strong acid with a neutral base, d, shows two acids and e. a strong base with a neutral base, we infer the correct buffer is b. 0.27 M ammonia + 0.38 M ammonium nitrate because it has a weak base (ammonia) and its conjugate acid, ammonium.
Regards!
Calculate the mass of CaCL2 formed when 5 moles of chlorine reacts with calcium metal....
Answer:
555 g of CaCl₂
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
Ca + Cl₂ —> CaCl₂
From the balanced equation above,
1 mole of Cl₂ reacted to produce 1 mole of CaCl₂.
Next, we shall determine the number of mole of CaCl₂ produced by the reaction of 5 moles of Cl₂. This can be obtained as follow:
From the balanced equation above,
1 mole of Cl₂ reacted to produce 1 mole CaCl₂.
Therefore, 5 moles of Cl₂ will also react to produce 5 moles of CaCl₂.
Thus, 5 moles of CaCl₂ were obtained from the reaction.
Finally, we shall determine the mass of 5 moles of CaCl₂. This can be obtained as follow:
Mole of CaCl₂ = 5 moles
Molar mass of CaCl₂ = 40 + (35.5×2)
= 40 + 71
= 111 g/mol
Mass of CaCl₂ =?
Mass = mole × molar mass
Mass of CaCl₂ = 5 × 111
Mass of CaCl₂ = 555 g
Therefore, 555 g of CaCl₂ were obtained from the reaction.
list some applications of chemistry in your dail life
Chemistry and chemical reactions are not just limited to the laboratories but also the world around you.
Chemistry in Food Production:
Plants produce food for themselves through photosynthesis; which is a complex chemical reaction in itself. The chemical reaction that takes place in photosynthesis is the most common and vital chemical reaction.
6 CO2 + 6 H2O + light → C 6H12O6 + 6 O2
Chemistry in Hygiene:
Right before you consume your food, you make it a point to wash your hands with soap. Isn’t it? The cleaning action of soap is based on its ability to act as an emulsifying agent. Soaps are fatty acids salts of sodium or potassium; produced by a chemical reaction called saponification. Soaps interact with the grease or oil molecule, which, in turn, results in a cleaner surface.
The Chemistry of an Onion:
Ever wondered why you shed tears while chopping an onion? This also happens because of the underlying chemistry concepts. As soon as you slice an onion, sulfenic acid is formed from amino acid sulfoxides. Sulfenic acid is responsible for the volatile gas, propanethiol S-oxide, that stimulates the production of tears in the eyes.
Chemistry in Baking:
Who does not like to eat fluffy freshly baked bread? Baking soda is an efficient leavening agent. The addition of baking soda to food items before cooking leads to the production of carbon dioxide (CO2); which causes the foods to rise. This whole process of rising of baked good is called chemical leavening.
Chemistry in Food Preservatives:
In case you ever read the ingredients on the bottle of ketchup, jams or pickles, you might be surprised to see a never-ending list of chemicals. What are they? These chemicals are called food preservatives; which delay the growth of microorganisms in foods. The chemical food preservatives not only prohibit the growth of bacteria, virus, fungi but also hinder the oxidation of fats, which is responsible for making the foods rancid. The most common chemical food preservatives are sodium benzoate, sorbic acid, potassium sorbate, calcium sorbate, sodium sorbate, propionic acid, and the salts of nitrous acid.
Chemistry in Digestion
The moment you put food in your mouth, a number of different chemical reactions start in your digestive tract. Saliva contains the enzyme amylase, which is responsible for breaking down carbohydrates, the stomach starts producing hydrochloric acid, the liver releases bile and the list of compounds released during digestion goes on. How do they work? All these enzymes undergo chemical reactions so that proper digestion, as well as assimilation of the food, occurs.
The Working of a Sunscreen
Before going out on a sunny day, you make it a point to wear sunscreen. Even the principle, behind the working of a sunscreen, has a chemistry background. The sunscreen uses a combination of organic and inorganic compounds to act as a filter for incoming ultraviolet rays. Sunblocks, on the other hand, scatter away UV light; so that it is unable to penetrate deep into the skin. Sunblocks contain complex chemical compounds like zinc oxide or titanium oxide, which prevent the UV rays to invade deeper into the skin.
Chemistry in Rust Formation
With time, your iron instruments start developing an orange-brown flaky coating called rust. The rusting of iron is a type of oxidation reaction. The atoms in the metal iron undergo oxidation and reduction; causing rusting. The formation of verdigris on copper and the tarnishing of silver are also the other everyday examples of chemical reactions. The chemical equation underlying rusting is:
Fe + O2 + H2O → Fe2O3. XH2O
Hope it helps.
a. Compound A and compound B are constitutional isomers with molecular formula C3H7Cl. When compound A is treated with sodium methoxide, a substitution reaction predominates. When compound B is treated with sodium methoxide, an elimination rection predominates. Propose structures A and B.
b. An unknown compound with molecular formula C6H13Cl is treated with sodium ethoxide to produce 2,3-dimethyl-2-butene as the major product. Identify the structure of the unknown compound.
Answer:
história phkfk
Explanation:
guiooupigjdytrss
How many aluminum atoms are in 2.88 g of aluminum?
Express your answer to three significant figures.
Answer:
Explanation:
1 Mole of Aluminum with mass 26.98g contains 6.02*10^23 atoms.
In 2.88g of Aluminum, there are 2.88/26.98*6.02*10^23 = 6.426*10^22 atoms.
Answer:
Explanation:
no of Al atoms = 2.88/26.98*6.02*10^23
= 6.426*10^22
= 6.43*10^22
Water supplies are treated with chlorine to kill pathogens. Chlorine reacts well with many other chemicals and bacterial cells because it is a strong oxidant. However, Legionella pneumophila can sometimes evade killing by residual chlorine. How does it do this
Answer:
By forming Biofilms
Explanation:
Legionella pneumophila forms biofilms by using the residual chlorine and hence act as killer of other microbial cells and intracellular pathogens. It also colonizes within multispecies microbial communities and kills them
Water (H2O) is a polar solvent, and carbon tetrachloride (CCl4) is a nonpolar solvent. In which solvent is each of the following substances, found or used in the body, more likely to be soluble?
a. NaNO3, ionic
b. I2, nonpolar
c. sucrose (table sugar), polar
d. gasoline, nonpolar
e. vegetable oil, nonpolar
f. benzene, nonpolar
g. LiCl, ionic
h. Na2SO4, ionic
Answer:
a. NaNO3, ionic - water
b. I2, nonpolar - CCl4
c. sucrose (table sugar), polar - water
d. gasoline, nonpolar - CCl4
e. vegetable oil, nonpolar - CCl4
f. benzene, nonpolar -CCl4
g. LiCl, ionic - water
h. Na2SO4, ionic - water
Explanation:
Water is a polar substance. This means that it has the ability to dissolve other polar substances. Furthermore, water, even being made by covalent bonds, manages to dissolve ionic substances, because it is a molecule with a partial positive charge on one side, due to hydrogen, and a partial negative charge on the other side, due to the two molecules of oxygen. In this case, any polar or ionic substance has the ability to be dissolved in water, while any non-polar substance needs a non-polar liquid to be able to be dissolved, such as CCI4.
A solution has a [H3O+] of 1 × 10−5 M. What is the [OH−] of the solution?
A) 9 M
B) 14 M
C) 1 x 10^{-9}
D) 1 x 10^{-14}
Which of the following is not generally a characteristic of metal?
Ductility
O
Malleability
High melting point
Low boiling point
