ou charge a piece of aluminum foil (mass = 4.99 g) by touching it to a charged rod. The charged rod gives the aluminum foil a charge of 13 µC. Your professor brings a charged plate over and tells you to put the aluminum foil on top of the plate. To your surprise the aluminum foil hovers motionless in the air above it! Calculate the value of the electric field from the charged plate (assume it is a uniform field and the aluminum foil is a point charge).

Answer: 5.21 s

Explanation:

Given

Helicopter ascends vertically with [tex]u=5.4\ m/s[/tex]

Height of helicopter [tex]h=105\ m[/tex]

When the package leaves the helicopter, it will have the same vertical velocity

Using equation of motion

[tex]\Rightarrow h=ut+\dfrac{1}{2}at^2\\\\\Rightarrow 105=-5.4t+0.5\times 9.8t^2\\\Rightarrow 4.9t^2-5.4t-105=0\\\\\Rightarrow t=\dfrac{5.4\pm \sqrt{5.4^2+4\times 4.9\times 105}}{2\times 4.9}\\\\\Rightarrow t=\dfrac{5.4\pm 45.68}{9.8}\\\\\Rightarrow t=5.21\ s\quad \text{Neglect negative value}[/tex]

So, package will take 5.21 s to reach the ground

Answer:

English please

Explanation:

I don't understand the question

Answer:

The rate of the dump truck is 650 [tex]\frac{lb}{s}[/tex]

Explanation:

A large dump truck can move 1,170 tons/h of gravel from one point to another on a work site.

To convert the units from tons/h to lb/s, you should know that:

To carry out the unit conversion you must perform the following steps:

[tex]1170 \frac{ton}{h}*\frac{2000 lb}{1 ton} *\frac{1 h}{3600 s}[/tex]

Solving:

[tex]1170 \frac{ton}{h}*=650 \frac{lb}{s}[/tex]

So, the rate of the dump truck is 650 [tex]\frac{lb}{s}[/tex]

Answer:

. You want your product to be as strong and as long lasting as possible. There are also the safety implications to consider. You see, dangerous failures arising from poor material selection are still an all too common occurrence in many industries. yep that the answer have a Great day

Explanation:

(◕ᴗ◕✿)

Answer:

Ray A = Incidence ray

Ray B = Reflected ray

Explanation:

From the law of reflection,

Normal: This is the line that makes an angle of 90° with the reflecting surface.

Ray A is the incidence ray: This is the ray that srikes the surface of a reflecting surface. The angle formed between the normal and the incidence ray is called the incidence angle

Ray B is the reflected ray: This is the ray leaves the surface of a reflecting surface. The angle formed between the reflected ray and the normal is called reflected angle

Answer:

the required distance is 6 cm

Explanation:

Given the data in the question;

f₁ = 15 cm

f₂ = 5.0 cm

d = 45 cm

Now, for first lens object distance s = ∝

1/f = 1/s + 1/s' ⇒ 1/5 = 1/∝ + 1/s'

Now, image distance of first lens s' = 15cm  

object distance of second lens s₂ will be;

s₂ = 45 - 15 = 30 cm

so

1/f₂ = 1/s₂ + 1/s'₂

1/5 = 1/30 + 1/s'₂

1/s'₂ = 1/5 - 1/30  

1/s'₂ = 1 / 6

s'₂ = 6 cm

Hence, the required distance is 6 cm

The distance of the final image from the first lens will be is 6 cm.

The mirror equation expresses the quantitative connection between object distance (do), image distance (di), and focal length (fl).

The given data in the problem is;

f₁ is the focal length of lens 1= 15 cm

f₂ s the focal length of lens 2= 5.0 cm

d is the distance between the lenses = 45 cm

From the mirror equation;

[tex]\frac{1}{f} = \frac{1}{s} +\frac{1}{s'} \\\\ \frac{1}{5} = \frac{1}{\alpha} +\frac{1}{s'} \\\\[/tex]

If f₁ is the focal length of lens 1 is 15 cm then;

[tex]s'=15 cm[/tex]

f₂ s the focal length of lens 2= 5.0 cm

s₂ = 45 - 15 = 30 cm

From the mirror equation;

[tex]\frac{1}{f_2} = \frac{1}{s_1} +\frac{1}{s_2'} \\\\ \frac{1}{5} = \frac{1}{30} +\frac{1}{s_2'} \\\\ \frac{1}{s_2'}= \frac{1}{5} -\frac{1}{30} \\\\ \frac{1}{s_2'}= \frac{1}{6} \\\\ \rm s_2'= 6 cm[/tex]

Hence the distance of the final image from the first lens will be is 6 cm.

To learn more about the mirror equation refer to the link;

https://brainly.com/question/3229491

Answer:

The correct answer is "22.27 hours".

Explanation:

Given that:

Radioactive isotope activity,

= 490,000 Bq

Activity,

= 110,000 Bq

Time,

= 48 hours

As we know,

⇒ [tex]A = A_0 e^{- \lambda t}[/tex]

or,

⇒ [tex]\frac{A}{A_0}=e^{-\lambda t}[/tex]

By taking "ln", we get

⇒ [tex]ln \frac{A}{A_0}=- \lambda t[/tex]

By substituting the values, we get

⇒ [tex]-ln \frac{110000}{490000} = -48 \lambda[/tex]

⇒    [tex]-1.4939=-48 \lambda[/tex]

                 [tex]\lambda = 0.031122[/tex]

As,

⇒ [tex]\lambda = \frac{ln_2}{\frac{T}{2} }[/tex]

then,

⇒ [tex]\frac{ln_2}{T_ \frac{1}{2} } =0.031122[/tex]

⇒ [tex]T_\frac{1}{2}=\frac{ln_2}{0.031122}[/tex]

         [tex]=22.27 \ hours[/tex]  

Answer:

33 mph

Explanation:

My best guess

Explanation:

2. [tex]R_T = R_1 + R_2 + R_3 = 625\:Ω + 330\:Ω + 1500\:Ω[/tex]

[tex]\:\:\:\:\:\:\:= 2455\:Ω = 2.455\:kΩ[/tex]

3. Resistors in series only need to be added together so

[tex]R_T = 8(140\:Ω) = 1120\:Ω = 1.12\:kΩ[/tex]

Answer:

Hmmm...

This is a bit tricky

Ok...

Negative Velocity means you're Moving in the Opposite direction....

Negative Acceleration (deceleration) means you're slowing down.

Deceleration would mean slowing down if you were Moving with a Positive velocity.

But In this case...

You're Moving with negative velocity and Negative acceleration...

This simply means that the acceleration and velocity vector are in the same direction....

Its means that...

"YOU'RE SPEEDING UP"

Just that you're doing it in the opposite direction.

Hope this helps.

Answer:

id

Explanation:

i don't know

The rock takes 8.16s to return to its release point. Given that the elastic band provides a speed of 40m/s to the rock in 10 cm stretch.

Initial speed of the rock, u = 40m/s

Final position of the rock s = 0m taking the release point as reference. The rock takes 8.16s to return to its release point. Given that the elastic band provides a speed of 40m/s to the rock in 10 cm stretch.

Nuclear energy is a useful source of power but has disadvantages. The disadvantage of nuclear energy is it produces dangerous waste.

Initial speed of the rock, u = 40m/s

Final position of the rock s = 0m taking the release point as reference

From the second equation of motion:

solving above we get:

t = 0s or t = 8.16s,  t =0  seconds is neglected since it represents the initial position which is the same as the final position at t = 8.16s

So, the rock takes 8.16 seconds to return to the release point.

Therefore, The rock takes 8.16s to return to its release point. Given that the elastic band provides a speed of 40m/s to the rock in 10 cm stretch.

Learn more about speed of rock on:

brainly.com/question/11049671

#SPJ2

Answer:

the radio can tune wavelengths between 1.88 and 5.97 m

Explanation:

The signal that can be received is the one that is in resonance as the impedance of the LC circuit.

         X = X_c - X_L

         X = 1 / wC - w L

at the point of resonance the two impedance are equal so their sum is zero

         X_c = X_L

         1 / wC = w L

         w² = 1 / CL

         w = [tex]\sqrt{\frac{1}{CL} }[/tex]

let's look for the extreme values

C = 1  10⁻¹² F

         w = [tex]\sqrt{\frac{1}{ 1 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]

         w = [tex]\sqrt{1 \ 10^{18}}[/tex]

         w = 10⁹ rad / s

C = 10 10⁻¹² F

         w = [tex]\sqrt{\frac{1}{10 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]Ra 1/10 10-12 1 10-6

         w = [tex]\sqrt{0.1 \ 10^{18}}[/tex]Ra 0.1 1018

         w = 0.316 10⁹ rad / s

Now the angular velocity and the frequency are related

           w = 2π f

           f = w / 2π

the light velocity  is

           c = λ f

           λ = c / f

we substitute

          λ = c 2π/w

we calculate the two values

 C = 1 pF

          λ₁ = 3 10⁸ 2π / 10⁹

          λ₁= 18.849 10⁻¹ m

          λ₁ = 1.88 m

C = 10 pF

           λ₂ = 3 10⁸ 2π / 0.316 10⁹

           λ₂ = 59.65 10⁻¹ m

           λ₂ = 5.97 m

so the radio can tune wavelengths between 1.88 and 5.97 m

Answer:2

Explanation:

Answer:

[tex]V_{rms}=5.6*10^3m/s[/tex]

Explanation:

From the question we are told that:

Temperature [tex]T=5100K[/tex]

Generally the equation for RMS Speed is mathematically given by

 [tex]V_{rms}=\sqrt{\frac{3kT}{m}}[/tex]

Where

 [tex]K=Boltzman's constant[/tex]

 [tex]K=1.38*10^{-23}[/tex]

And

 [tex]M=molecular mass[/tex]

 [tex]M=4*1.67*10^{-27}[/tex]

 [tex]V_{rms}=\sqrt{\frac{3(1.38*10^{-23})5100}{4*1.67*10^{-27}}}[/tex]

 [tex]V_{rms}=5.6*10^3m/s[/tex]

Answer: the answer is 23voltage

Explanation: because the voltage and time put together is 23

Answer:

The linear mass density of rope is 0.16 kg/m.

Explanation:

mass, m = 0.52 kg

force, F = 47 N

length, L = 3.3 m

(a) The linear mass density of the rope is defined as the mass of the rope per unit length.

Linear mass density = m/L = 0.52/3.3 = 0.16 kg/m

Answer:

The mass decreases

Explanation:

Just smart

and what else? is that all?

Answer:

hindi ko maintindihan teh

Answer:

becaude of electricity

Answer:

The kinetic energy and potential energy lost to friction is 2,420 J.

Explanation:

Given;

total mass, m = 40 kg

initial velocity of the girl, Vi = 5 m/s

hight of the hill, h = 10 m

length of the hill, L = 100 m

initial kinetic energy of the girl at the top hill:

[tex]K.E_{i} = \frac{1}{2} mv_i^2 = \frac{1}{2} \times 40 \times (5)^2\\\\K.E_{i} = 500 \ J[/tex]

initial potential energy of the girl at the top hill:

[tex]P.E_{i} = mgh_i = 40 \times 9.8 \times 10\\\\P.E_{i}= 3920 \ J[/tex]

Total energy at the top of the hill:

E = 500 J + 3920 J

E = 4,420 J

At the bottom of the hill:

final velocity = double of the initial velocity = 2 x 5 m/s = 10 m/s

hight of the hill = 0

final kinetic energy of the girl at the bottom of the hill:

[tex]K.E_{f} = \frac{1}{2} mv_f^2 \\\\K.E_f = \frac{1}{2} \times 40 \times (10)^2 = 200 0 \ J[/tex]

final potential energy of the girl at the bottom of the hill:

[tex]P.E_f = mgh_f = 40 \times 9.8 \times 0 = 0[/tex]

Based on the principle of conservation of energy;  

the sum of the energy at the top hill = sum of the energy at the bottom hill

The energy at the bottom hill is less due to energy lost to friction.

[tex]E_{friction} \ + E_{bottom}= E_{top}\\\\E_{friction} = E_{top} - E_{bottom}\\\\E_{friction} = 4,420 \ J - 2,000 \ J\\\\E_{friction} = 2,420 \ J[/tex]

Therefore, the kinetic energy and potential energy lost to friction is 2,420 J.

Answer: Conduction

Explanation: Conduction is the process by which heat energy is transmitted through collisions between neighboring atoms or molecules. Conduction occurs more readily in solids and liquids, where the particles are closer to together, than in gases, where particles are further apart.

Answer:

Chelsea F.C

Explanation:

Chelsea F.C

Soccer

Answer: The lowest possible frequency of sound for which this is possible is 212.5 Hz.

Explanation:

It is known that formula for path difference is as follows.

[tex]\Delta L = (n + \frac{1}{2}) \times \frac{\lambda}{2}[/tex]    ... (1)

where, n = 0, 1, 2, and so on

As John is standing perpendicular to the line joining the speakers. So, the value of [tex]L_{1}[/tex] is calculated as follows.

[tex]L_{1} = \sqrt{(2)^{2} + (5)^{2}}\\= 5.4 m[/tex]

Hence, path difference is as follows.

[tex]\Delta L = (5.4 - 5) m = 0.4 m[/tex]

For lowest frequency, the value of n = 0.

[tex]\Delta L = (0 + \frac{1}{2}) \times \frac{\lambda}{2} = \frac{\lambda}{4}[/tex]

[tex]\lambda = 4 \Delta L[/tex]

where,

[tex]\lambda[/tex] = wavelength

The relation between wavelength, speed and frequency is as follows.

[tex]\lambda = \frac{\nu}{f}\\4 \Delta L = \frac{\nu}{f}\\[/tex]

where,

[tex]\nu[/tex] = speed

f = frequency

Substitute the values into above formula as follows.

[tex]f = \frac{\nu}{4 \Delta L}\\f = \frac{340}{4 \times 0.4 m}\\= 212.5 Hz[/tex]

Thus, we can conclude that the lowest possible frequency of sound for which this is possible is 212.5 Hz.

Answer:

would the answer be c

Explanation: that what i think in my opian

Answer:

A

Explanation:

Answer: D

The force decreases inversely proportional to 1/r(squared)

Explanation:

I looked it up im sure this is correct

Answer:

option d

Explanation:

Two objects are attracted to each other by a gravitational force F. ... As the distance r from the center of the planet increases, what happens to the force of gravity on the rocket? The force decreases inversely proportional to 1/r(squared) A spacecraft is orbiting Earth with an orbital radius r.

the force of gravity is represented as

F = GM1M2/r²

now the mass of warth and rocket is considered to be constant and G is a universal constant so it can be said

F is inverse to r²

therefore as the value of r increases that is distance between earth and rocket increases the force decreases

(Follows inverse square law)

Answer:

d. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

Explanation:

The current through a capacitor is given by i = CdV/dt where C = capacitance of capacitor and V = voltage across capacitor. At steady state dV/dt = 0 and V = constant. So, i = CdV/dt = C × 0 = 0.

So, in dc steady state, the voltage across a capacitor is constant and the current zero.

The voltage across an inductor is given by V = Ldi/dt where L = inductance of inductor and i = current through inductor. At steady state di/dt = 0 and V = constant. So, V = Ldi/dt = L × 0 = 0.

So, in dc steady state, the voltage across an inductor is zero and the current constant.

So, In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

The answer is d.

Answer:

Part d is correct.

Answer:

The answer would be C.

Explanation:

This is what I would expect when you show someone else how to do something then is also known as teaching.

Please Mark as Brainliest

Hope this Helps