park company acquired an 80% interest in the common stock of southdale company for $1,540,000 on july 1, 2013. southdale company's stockholders' equity on that date consisted of:

Otto Inc. is retiring old equipment with a book value of $2,400. The options available to Otto should "be discussed, so the best course of action can be determined."

Since the cost is a sunk cost, it is no longer relevant to the decision. Continue reading to learn more about what Otto Inc. should do when retiring old equipment with a book value of $2,400.What should Otto Inc. do when retiring old equipment with a book value of $2,400?When Otto Inc. retires old equipment with a book value of $2,400, it should decide whether or not it should be sold for scrap or whether it should be donated or discarded if it is no longer operational.

A company must act ethically and socially responsible when disposing of waste, scrap, and unused equipment. If the equipment can be sold for scrap, the company may be able to recover some of the cost of the equipment. As a result, scrapping the equipment is the best option. Donating or recycling the equipment is the best option if it can be refurbished or if it can be recycled into other products.

It's critical to understand that the cost of the equipment is a sunk cost, which means that it cannot be recovered. As a result, it's irrelevant to the decision-making process. The equipment's cost should be removed from the company's books when it is retired from service.

Otto Inc. is retiring old equipment with a book value of $2,400.  Otto should "be discussed, so the best course of action can be determined."

For more such questions on the value

brainly.com/question/7924898

#SPJ11


The textile industry was the first to be greatly affected by the industrial revolution.

The Industrial Revolution was a period of rapid industrialization that took place from the 18th to the 19th century in Europe and North America. It was characterized by the transition from hand production methods to machine-based manufacturing, leading to an increase in productivity and the creation of new industries.

The revolution began in Britain in the mid-18th century and spread throughout Europe and North America. The introduction of new machines and technology, such as the spinning jenny and steam engine, enabled the mass production of goods and the mechanization of formerly manual tasks. This revolutionized the way goods were produced and distributed, leading to the growth of factories, mass production, and urbanization.

To learn more about Industrial revolution visit here:

brainly.com/question/855594

#SPJ4

The conditions of key importance to the development of the professions are the growth of industry, advances in technology, and the growth of cities. Thus, all three conditions are correct.

Professions are those vocations that are defined by specialized education, training, and an oath or code of ethics. The development of the professions was determined by many factors.

Among these factors were the growth of industry, advances in technology, and the growth of cities.

The growth of cities led to the development of professions. The demand for professions such as doctors, lawyers, architects, and engineers was high as a result of urbanization.

The development of cities necessitated the provision of services that were not required in rural areas, and this is where professions such as doctors, lawyers, architects, and engineers emerged.

Advances in technology played a critical role in the development of the professions. Advances in technology, such as the use of computerized machinery in manufacturing, have necessitated the hiring of experts who are skilled in managing these devices.

Therefore, professionals in technology-related professions such as engineers, computer scientists, and architects are in high demand.

The growth of the industry was also a key factor in the development of the professions. The industrial revolution, which began in the late 18th century and lasted until the mid-19th century, necessitated the creation of new professions.

Some of these professions include engineers, factory managers, and mechanics, all of whom played critical roles in the industrialization of nations. Thus, all three conditions are correct.

Learn more about Professional development here:

https://brainly.com/question/10452967

#SPJ11

What is the service auditor’s report?

The service auditor’s report is a report provided by an external auditor who has evaluated the internal controls of a service organization. It is performed under the SOC 1 framework, which assesses the internal controls over financial reporting that are in place to prevent or detect material misstatements that could affect the financial statements of a company. It also includes an assessment of the suitability of the design and the operating effectiveness of those controls.

What is an auditor's use of the service auditor's report on internal controls placed in operation?

An auditor can use the service auditor’s report as audit evidence for the client’s internal controls. An auditor may use the SOC 1 report to obtain audit evidence about the client's internal control. It also aids the client's auditor in determining whether to perform an audit of the internal control and provides information about the design and effectiveness of the client's internal controls.

The client’s auditor can utilize the service auditor’s report as an audit piece of evidence when auditing the financial statements. This is beneficial since the service organization has already been evaluated for its internal control effectiveness.

Auditors use the service auditor's report on internal controls placed in operation to assess the client's internal controls. They use this report to gain an understanding of the service organization's internal control policies and procedures, as well as to evaluate the effectiveness of the client's internal control policies and procedures. Therefore, the client’s auditor can use the service auditor’s report as audit evidence for the client’s internal controls. Therefore, Option B is correct.

Learn more about auditor at https://brainly.com/question/28103559

#SPJ11

At a price of $11, quantity demanded is 90; and at a price of $9, quantity demanded is 110. Since total revenue remains the same by the price decrease, demand must be unit elastic.

The total revenue (TR) for a product is calculated by multiplying the price (P) by the quantity demanded (Q): TR = P x Q.

At a price of $11, quantity demanded is 90, so TR = $11 x 90 = $990.

At a price of $9, quantity demanded is 110, so TR = $9 x 110 = $990.

Since the total revenue remains the same after the price decrease, the demand must be unit elastic. This means that the percentage change in quantity demanded is equal to the percentage change in price. In other words, a 10% decrease in price led to a 10% increase in quantity demanded, resulting in no change in total revenue.

You can learn more about total revenue (TR) at

https://brainly.com/question/29654117

#SPJ11

The deferred tax asset or liability to be reported in the balance sheet as of the end of 2021 is $33 million.

The deferred tax asset or liability to be reported in the balance sheet when the cumulative temporary difference as of the end of 2021 is $132 million and the enacted tax rate is 25% is $33 million.

Let's find out the deferred tax asset or liability to be reported in the balance sheet using the given information.

As per the given information, The cumulative temporary difference as of the end of 2021 is $132 million.

The future taxable amount is also $132 million.

The enacted tax rate is 25%.

The formula to calculate the deferred tax liability is as follows:

Deferred Tax Liability = Temporary Difference × Enacted Tax Rate

Deferred Tax Liability = $132 million × 0.25

Deferred Tax Liability = $33 million

Therefore, the deferred tax asset or liability to be reported in the balance sheet is $33 million.

Learn more about Deferred Tax Liability here:

https://brainly.com/question/18370946

#SPJ11

Quality control for a CPA firm, as referred to in Statements on Quality Control Standards (SQCS), applies to auditing and accounting and review services.

Quality control is the process of ensuring that the products or services produced by a company or an individual are of high quality. The product or service produced should meet the needs of the client or customer. Quality control is also known as QC or quality management.

Quality control in a CPA firm is a critical part of ensuring that the services provided by the firm are of high quality. The SQCS outlines the requirements for quality control in a CPA firm. The SQCS is a set of guidelines that helps CPA firms provide quality services to their clients. The SQCS applies to auditing and accounting and reviews services. It outlines the requirements for quality control in a CPA firm, which includes policies, procedures, and training. Quality control helps to ensure that the work done by the CPA firm is accurate, reliable, and meets the needs of the client.

Learn more about quality control at https://brainly.com/question/17368639

#SPJ11

A  statement of work refers to terms and conditions for a purchased service that indicate, among other things, what services will be performed and how the service provider will be evaluated. (A)

A statement of work (SOW) is a document that defines the terms and conditions for a purchased service. It outlines the specific tasks and deliverables required from the service provider, how the service provider will be evaluated, and the payment conditions and structure.

The SOW also includes details about the contract duration, intellectual property rights, and any additional obligations. A SOW should be as specific and detailed as possible, and should also include any assumptions and limitations that are part of the agreement. (A)

To know more about intellectual property rights click on below link:

https://brainly.com/question/169200#

#SPJ11

Compliance attestation standards apply to the report when a practitioner has examined a client's compliance with debt covenants associated with a bank loan.

Compliance attestation standards is a set of standards that requires an independent auditor to attest to the fairness and integrity of an entity's financial and accounting records. Compliance attestation is a process in which an independent auditor attests to an entity's compliance with relevant laws, regulations, and rules. The attestation process may include an examination of financial records, as well as interviews with management and staff.

A practitioner has examined a client's compliance with debt covenants associated with a bank loan and is ready to issue a report. The report should conform to the compliance attestation standards, which include a set of criteria for the attestation process. Compliance attestation standards, which are established by the American Institute of Certified Public Accountants (AICPA), govern the attestation process and help ensure that auditors follow standard procedures and best practices.

Compliance attestation standards are used in the following types of audits: financial statement audits, service organization control (SOC) audits, and other specialized audits.

For more about practitioner:

https://brainly.com/question/14893245

#SPJ11

All of her income is salary from her employer:

Without any deductions, Lacy's taxable income is $44,000. According to the Tax Rate Schedule, her tax liability would be $7,764.

Her $44,000 of taxable income includes $1,000 of qualified dividends:

In this scenario, Lacy's taxable income of $44,000 includes $1,000 of qualified dividends, which are taxed at a lower rate than ordinary income. According to the Dividends and Capital Gains Tax Rates, her tax liability would be $8,164.

Her $44,000 of taxable income includes $5,000 of qualified dividends:

In this case, Lacy's taxable income of $44,000 includes $5,000 of qualified dividends. According to the Dividends and Capital Gains Tax Rates, her tax liability is $8,764.

Overall, Lacy can save taxes by including qualified dividends in her taxable income, as they are taxed at a lower rate than ordinary income. In the best case scenario, with $5,000 of qualified dividends included in her taxable income, her tax liability would be reduced by $600 compared to a situation where she has only ordinary income.

Know more about TAX here:-

https://brainly.com/question/16423331#

#SPJ11

The United Nations' classification of stages of economic development has been criticized primarily because it oversimplifies and generalizes the economic conditions and ignores the reality of variations that exist in different countries or regions within a country.

The United Nations has classified countries' economic development into three categories:

developed countries, developing countries, and underdeveloped countries.

-Developed countries are those that have a high standard of living, well-established economies, and advanced infrastructure.

-Developing countries are those that have a relatively low level of industrialization and a moderate standard of living.

-Underdeveloped countries, also known as less developed countries, are those that are behind the developed and developing countries in terms of economic development.

Learn more about Economic development at

https://brainly.com/question/16299816

#SPJ11

The answer to the question is "c. taxed as a separate entity." Business entities that are taxed as separate entities are the ones that do not require the protection and flexibility provided by more complex forms of business entities.

The complexity of a business entity is highly influenced by its potential for liability. Thus, businesses with a relatively low potential for liability can do well with a simple business entity, while businesses with a higher potential for liability require more complex structures. A business entity is a specific kind of legal entity that is utilized for business activities, business dealings, or other similar activities. A business entity provides a platform for managing a commercial enterprise and ensures that its owners are well-protected.

Business entities are of various forms, such as sole proprietorship, partnership, corporation, or limited liability company (LLC). "Business liability" is the legal responsibility of a business for its actions or omissions that cause harm to others. Liability is a factor to consider when choosing a business entity. A company can choose to operate as a separate legal entity that protects the owners' personal assets from the business's liabilities.

Therefore, to limit business liability, businesses require more complex forms of business entities.

To learn more about “business entity” refer to the https://brainly.com/question/13142281

#SPJ11

The statement "strategic sourcing is the process of identifying a company that provides a needed good or service" is false because strategic sourcing is a comprehensive approach to procurement that involves analyzing the entire procurement process and supply chain

Strategic sourcing is not simply the process of identifying a company that provides a needed good or service. It is a comprehensive approach to procurement that involves analyzing the entire procurement process and supply chain, from identifying the need for a product or service to selecting and managing suppliers, to ensure that the organization can acquire the goods and services it needs in the most efficient and cost-effective manner.

Strategic sourcing involves a thorough analysis of the market, identifying potential suppliers, evaluating their capabilities and costs, negotiating contracts, and managing supplier relationships to ensure the ongoing delivery of high-quality goods and services. The goal of strategic sourcing is to optimize procurement processes to reduce costs, increase efficiency, and improve the quality of goods and services acquired, which can help organizations remain competitive in their respective markets.

Learn more about strategic sourcing here

brainly.com/question/28903410

#SPJ4

The note-taking method that involves sketching out your main ideas using bullet points is called the Cornell Note-Taking System.

This system was developed by Dr. Walter Pauk at Cornell University in the 1950s and is widely used today. It consists of dividing the paper into three parts: a cue column on the left side, a main note column in the middle, and a summary column on the right. In the main note column, the student should take notes while the lecture is being given. After the lecture, they should summarize the notes in the summary column. Finally, the student should jot down the main ideas, questions, or keywords in the cue column by sketching out a visual representation of the main ideas using bullet points.

This system is helpful for reviewing and studying as it helps the student organize their notes.

For more questions on Cornell Note-Taking System.

https://brainly.com/question/27347019

#SPJ11

The potting soil manufacturer must determine how many bags of each of the three potting soil types can be made from 700 units of sand, 550 units of loam, and 450 units of peat moss.

The following raw components are needed to make each type of potting soil: Two units of sand, one unit of loam, and one unit of peat moss are needed to make each bag of potting soil for seedlings. One unit of sand, two units of loam, and one unit of peat moss are needed for every bag of potting soil used for general potting. Sand, loam, and peat moss are needed in equal amounts for each bag of potting soil for hardwood plants.

Let's assume that the company produces x bags of potting soil for seedlings, y bags of potting soil for general potting, and z bags of potting soil for hardwood plants. The following equation represents the requirement of sand, loam, and peat moss:

2x + y + 2z = 700

x + 2y + 2z = 550

x + y + 2z = 450

The above equations can be solved by substitution to find the values of x, y, and z. Therefore, the company can produce 150 bags of potting soil for seedlings, 200 bags of potting soil for general potting, and 100 bags of potting soil for hardwood plants with the given amounts of raw materials.

For more about raw material:

https://brainly.com/question/13160417

#SPJ11

In four years, I anticipate art shares selling for $41.68.

Market value is another name for the current price. This value is the price at which a share of stock or any other security was last traded. In an open market, the current price serves as a starting point.

The cost of equity is the company's required return on an investment or project. For instance, the required return to justify the initiative is determined by the cost of equity when a company decides whether to take on new financing.

Dividend per share= $3

Divided=1-retained profits=1 - 0.2= 0.8

Cost of equity= 12%

Growth rate= 25%*.2= 5%

The formula is;

Current Stock price=Dividend/(cost of equity-growth rate)

Current stock price=$3(0.8)/(0.12-0.05)=$34.29

Share price after 4 year will be=$34.29 (1+ 5%)^4=$41.68

Learn more about cost of equity: https://brainly.com/question/14041475

#SPJ1

An increase in inflationary expectations will most likely affect nominal interest rates and bond prices in the short run by an increase in nominal interest rates and a decrease of bond prices. The correct answer is Option B.

When an economy is on the cusp of inflation, nominal interest rates rise. This rise in nominal rates increases the cost of borrowing and decreases the demand for credit. To remain competitive, banks increase their lending rates, and bond yields rise as a result. The price of a bond decreases as its yield rises because it is now less desirable to hold the bond. Thus, the value of a bond falls when interest rates rise.

An increase in inflationary expectations will raise the cost of borrowing in the economy, prompting banks to charge higher lending rates, and hence bond yields will increase. As the price of the bond falls, it becomes less desirable to hold, thus the value of the bond decreases. Therefore, bond prices will decline, and nominal interest rates will increase. Thus, the correct answer is (B) Increase / Decrease.

Learn more about inflation here: https://brainly.com/question/850547

#SPJ11

In the following question, To make the part, the Beto Company would need to pay $8.40 per unit for direct materials, $1.00 per unit for direct labour, and 80% of direct labour cost ($0.80) in incremental overhead, totalling $10.20 per unit.

The Beto Company is considering making a part for one of its products, which it currently pays $7.30 per unit to buy. The direct materials cost for the part is $8.40 per unit and the direct labour cost is $1.00 per unit. The company normally applies overhead at a rate of 200% of direct labour cost, which would be an incremental overhead of 80% for the part.

Therefore, to make the part, the Beto Company would need to pay $8.40 per unit for direct materials, $1.00 per unit for direct labour, and 80% of direct labour cost ($0.80) in incremental overhead, totalling $10.20 per unit.

For more such questions on Company

https://brainly.com/question/24553900

#SPJ11


The factors that determine the elasticity of resource demand are multiple choice A. income of buyers in the market and the ratio of resource costs to total revenues.

Ease of resource substitutability, elasticity of product demand, and the ratio of resource costs to total costs, C. elasticity of product supply, and the price of the resource, and D. elasticity of product supply, the ratio of resource costs to total revenues, and the income of buyers in the market.b. The effects that each of the following factors will have on the elasticity or the location of the demand for resource c, which is being used to produce commodity x, are:I. An Increase In the demand for product X - When there is an increase in the demand for product X, the demand for resource C used to produce commodity X also increases. This increase in demand leads to an increase in the price of resource C, which makes the demand for resource C more inelastic.ii. An increase in the price of substitute resource D - When the price of substitute resource D increases, the demand for resource C used to produce commodity X decreases. This decrease in demand leads to a decrease in the price of resource C, which makes the demand for resource C more elastic.ill. An increase in the number of resources substitutable for C in producing X - When the number of resources substitutable for C in producing commodity X increases, the demand for resource C used to produce commodity X decreases. This decrease in demand leads to a decrease in the price of resource C, which makes the demand for resource C more elastic.iv. A technological improvement in the capital equipment with which resource C is combined - When there is a technological improvement in the capital equipment with which resource C is combined, the demand for resource C used to produce commodity X increases. This increase in demand leads to an increase in the price of resource C, which makes the demand for resource C more inelastic.v. A fall in the price of complementary resource E - When the price of complementary resource E falls, the demand for resource C used to produce commodity X increases. This increase in demand leads to an increase in the price of resource C, which makes the demand for resource C more inelastic.vi. A decline in the elasticity of demand for product X due to a decline in the competitiveness of product market X - When there is a decline in the elasticity of demand for product X due to a decline in the competitiveness of product market X, the demand for resource C used to produce commodity X decreases. This decrease in demand leads to a decrease in the price of resource C, which makes the demand for resource C more elastic.

For more questions on total revenues,

https://brainly.com/question/21290274

Cara is taking advantage of promotions and discounts offered by retailers. She received a free shampoo packet with a coupon in the mail, which she used to purchase the shampoo when she next went to the store.

She also took advantage of the free toothbrush that came with the tube of toothpaste and thus saved money on the purchase.

Cara is taking advantage of a promotional deal while shopping. Cara is taking advantage of a while shopping promotional deal.

This is because she received a free shampoo packet in the mail with a coupon last week and decided to use the shampoo coupon to purchase a new hair product at the store.

It is safe to say that she is taking advantage of the promotion deals that are being offered in the store. Cara received a free shampoo packet in the mail with a coupon last week.

When she went to the store, she used the shampoo coupon to buy a new hair product.

She bought a particular brand of toothpaste because the tube came with a free toothbrush. Thus, it can be concluded that she is taking advantage of the promotional deals while shopping.

Learn more about promotions and discounts here:

https://brainly.com/question/29823783

#SPJ11

In the following question,  option 3). "Corporate officers are technically employees of a corporation, so their rights are defined by "corporate bylaws" drawn up by the board of directors or the incorporators."

What are corporate bylaws? Corporate bylaws are a legal document that outlines how an organization is governed, including rules and regulations regarding day-to-day operations and corporate management. The bylaws define the structure of the organization's board of directors, board meetings, voting procedures, and the roles and responsibilities of officers.

A corporation's officers are technically employees of the organization, and as such, their rights are specified in the corporation's bylaws created by the board of directors or incorporators. These bylaws detail the positions and responsibilities of officers, as well as how they are selected, their terms of service, and their rights and obligations.

For more such questions on Corporate

https://brainly.com/question/24553900

#SPJ11

The rights of corporate officers are typically defined by corporate bylaws, which are documents that outline the rules and regulations of a corporation. These bylaws typically define the powers and responsibilities of officers, as well as the duties that they must fulfill in order to remain in their positions.

These bylaws also outline any additional rights that corporate officers may have, such as the right to vote on certain matters or the right to receive certain benefits.

By understanding their rights and responsibilities, corporate officers can ensure that they are fulfilling their duties to the best of their ability and are protecting their own interests

Know more about corporate bylaws here

https://brainly.com/question/14531736#

#SPJ11

Option a: All of the following are ways to avoid injuries when working on computers EXCEPT placing a monitor 12" from the eye.

When we talk about computer-related injuries, we mean any type of aches, pains, aches, pains, or syndromes resulting from computer use. In addition to repeated injuries, this includes conditions caused by poor workplace design, improper posture, and uncomfortable furniture.

To make matters worse, computer-related injury statistics show that the problem is becoming more common. Musculoskeletal disorders alone affect 1.8 million workers and incapacitate 600,000.

Computer-related injuries at work come in many forms. They can take the form of muscle spasms, strains, sprains, headaches, and joint pain.

To learn more about injuries related to computer, here:

https://brainly.com/question/15351435

#SPJ4

Complete question:

All of the following are ways to avoid injuries while working on computers except ______.

(a) placing a monitor atleast 12 inches from the eyes

(b) purchasing an adjustable chair

(c) ensuring proper lightening

(d) taking breaks

The present value of an annuity that pays $74 per year for 5 years and an additional $1,000 with the final payment is $1,019.

This is calculated using the formula for present value of an annuity which takes into account the future value of a series of payments made at the end of each period.

To calculate the present value, we need to know the nominal rate (in this case, 9.65%), the payment per period (in this case, $74) and the number of payments (in this case, 5). We also need to factor in the additional $1,000 that is paid out with the final payment.

The formula for present value is:
PV = C x [((1 + r)^n - 1)/r]

Where,
PV = Present Value
C = Payment per period
r = Nominal rate
n = Number of payments

Substituting our values into the formula, we get:
PV = 74 x [((1 + 0.0965)^5 - 1) / 0.0965] + 1000

Simplifying, this is:
PV = 74 x [((1.0965)^5 - 1) / 0.0965] + 1000

Calculating this further, we get:
PV = 74 x [5.4732 - 1) / 0.0965] + 1000
PV = 74 x 4.4767 + 1000
PV = $1,019

Therefore, the present value of an annuity that pays $74 per year for 5 years and an additional $1,000 with the final payment is $1,019.

For more question on "Annuity" :

https://brainly.com/question/25792915

#SPJ11

The present value of the annuity can be calculated using the present value of an annuity formula and the present value of a future lump sum formula. Unfortunately, none of the provided options appear to be correct.

The present value of an annuity can be calculated using the formula PVA = PMT * [(1 - (1 + r)^-n) / r]. In this case, PMT refers to the annuity payment per period which is $74, r is the interest rate per period as a decimal (9.65%/100) = 0.0965, and n is the number of periods which is 5 years. However, since the annuity includes an additional lump sum of $1000 with the final payment, we will have to consider this separately as a present value of a future lump sum. The present value of a future lump sum can be calculated using the formula PV = FV * (1 + r)^-n. Therefore, the present value of the annuity is the sum of the present value of the annuity payments and the present value of the final lump sum payment. Unfortunately, none of the provided options (a. $1,019 b. $1,017 c. $1,002 d. $914 e. $1,092) seem accurate based on these calculations.

https://brainly.com/question/33116077

#SPJ12

The effective annual interest rate of a new credit card that has a 15% nominal interest rate compounded daily is about 16.18%.

Nominal interest rate is the rate that is expressed per annum which is not adjusted for the frequency of compounding. Whereas, effective annual interest rate is the actual rate that has been earned after the compounding. This actual rate is the rate that would be earned if the frequency of compounding is once per annum.

Therefore, the formula for calculating effective annual interest rate is:

Where r is the nominal interest rate and m is the number of times the interest is compounded in a year. Given that the nominal interest rate of the new credit card is 15% and it is compounded daily. Therefore, we can substitute the values in the formula as follows:

Therefore, the effective annual interest rate of the new credit card is about 16.18%.Hence, option D is the correct answer.

Learn more about credit card https://brainly.com/question/26857829

#SPJ11

The government can approach the socially optimal level by taxing the sellers of the product, subsidizing the buyers of the product, or providing the product itself.

Where there are positive externalities from having a particular product in a society, the government can make the quantity of the product approach the socially optimal level by doing the following except subsidizing the sellers of the product.

Which are the three different types of externalities? Externalities come in three forms: positive, negative, and nonexistent externalities. Positive externalities are beneficial, while negative externalities are harmful. When an activity results in external benefits, it is known as a positive externality.

The following ways can be used by the government to approach the socially optimal level where there are positive externalities from having a particular product in a society: Taxing the sellers of the product: An excise tax on products that produce negative externalities can be levied to decrease the use of such products.

When a tax is imposed on producers who produce items that produce negative externalities, the price of these products rises, and consumers' demand for these items decreases. Subsidizing the buyers of the product:

You can read more about Positive externalities at https://brainly.com/question/477170

#SPJ11

If you are managing inventory of finished goods, the source of control that should be used is D. Shop floor control system.

Inventory control is a series of measures taken to maintain inventory within the desired range. It entails keeping an accurate record of a company's stocked goods to keep costs down while ensuring optimal quantities of raw materials, supplies, and finished products. Managing inventory of finished goods requires having a well-coordinated system. One such system is the shop floor control system.

A shop floor control system is responsible for the day-to-day management of production on the shop floor. It acts as a link between production planning and actual production activities. This system performs a variety of functions, including monitoring the shop floor activities, measuring the output performance of each machine and operator, recording production data, and tracking the production processes.

To sum up, managing inventory of finished goods requires a shop floor control system. Therefore, the answer to this question is D: "shop floor control system".

This question should be provided as:

Imagine you are tasked with inventory control for your plant. using your knowledge of inventory management, answer the following question. if you are managing inventory of finished goods, which source of control should you use?

Learn more about finished goods https://brainly.com/question/28217513

#SPJ11

The expected return on the minimum-variance portfolio is approximately 13.6. It is the optimized portfolio. The correct option is B.

A minimum-variance portfolio, often known as an optimized portfolio or mean-variance portfolio, is a well-balanced financial portfolio created to offer the lowest possible level of risk. This is due to its investment strategy, which focuses on low variance, low risk, and the use of modern portfolio theory.

The minimum-variance portfolio, which is a critical part of modern portfolio theory, is made up of stocks that have the lowest possible volatility, and the optimal portfolio weights are estimated using the mean-variance portfolio theory.

Using the following formula:

ER(Minimum Variance Portfolio) = wA × RA + wB × RB

where, wA and wB are the weights of stocks A and B respectively, RA and RB are the expected returns of stocks A and B respectively.

Substituting the known variables into the formula above, we have: ER(Minimum Variance Portfolio) = wA × RA + wB × RB

ER = 0.5×0.20+0.5×0.15= 0.175, which is approximately 13.6%.

Therefore, the correct option is B.

Learn more about Minimum-variance portfolio here:

https://brainly.com/question/29974442

#SPJ11

False. Business incubators typically provide more than just physical space.

In addition to renting space, they often offer a range of services and support to help new businesses grow and succeed. This can include management advice, mentoring, access to funding, networking opportunities, and other forms of assistance.

The goal of business incubators is to help startups overcome the challenges of starting and growing a new business, and to create a supportive environment where entrepreneurs can thrive.

Read more about management advice here:

https://brainly.com/question/28072798

#SPJ1

True: A business continuity plan (BCP) will help determine the mission-essential function or the activity that serves as the core purpose of the enterprise.

A business continuity plan is a strategy that outlines how an organization will continue operating in the event of a significant disruptive incident. The plan describes how the company will respond to incidents, preserve essential business functions, recover IT assets and other infrastructure, and resume full operations as quickly and safely as possible.

The business continuity plan's primary goal is to ensure that the organization can continue to operate during disruption and rapidly recover afterward. The plan aims to safeguard the company's financial interests, reputation, and brand while minimizing the impact on customers, employees, vendors, and other stakeholders.

Learn more about  business continuity plan at https://brainly.com/question/30001059

#SPJ11

Ensuring political stability and relatively little corruption can help economic growth, as it can create a more secure environment for businesses to operate in, allowing for more investment, which in turn can lead to economic growth.

The following are some government policies that can help to promote economic growth:

Learn more about economic growth at https://brainly.com/question/1690575

#SPJ11