Answer:
Step-by-step explanation:
An important math tool is graphing. It can be a straightforward method for introducing more general concepts like most and least, greater than, or less than. It can also be a great way to get your child interested in math and get them excited about it. Using graphs and charts, you can break down a lot of information into easy-to-understand formats that quickly and clearly convey key points.
Given equation 2x + y = 6 we can drive from this equation that at x = 0 y will be 6 and y =0 x will be 3 hence we have two points of the line (0,6) and (3,0)
From the Given equation (2) 6X + 3Y = 12 we can drive from this equation that at x = 0 y will be 4 and y =0 x will be 2 hence we have two points of the line (0,4) and (2,0).
Eddie est discutiendo con Tana sobre las probabilidades de los distintos resultados al lanzar tres monedas. Decide lanzar una moneda de un centavo, una de cinco centavos y una de die centavos. ¿ Cuál es la probabilidad de que las tres monedas salgan cruz?
The probability of getting tails in the three coins would be 0.125 or 12.5%.
How to calculate the probability?To calculate the probability of an event happening, first, we need to identify the rate of the desired outcome versus the total possible outcomes. Moreover, to determine the total probability of two or more events happening we need to calculate the probability of each event and then multiply the results.
Probability of getting tails in any of the three coins:
1 / 2 = 0.5
Total probabilityy:
0.5 x 0.5 x 0.5 = 0.125 or 12.5%
Learn more about probability in https://brainly.com/question/30034780
#SPJ1
in fig. 8-25, a block slides along a track that descends through distance h.the track is frictionless except for the lower section. there the block slides to a stop in a certain distance d because of friction. (a) if we decrease h,will the block now slide to a stop in a distance that is greater than, less than, or equal to d? (b) if, instead, we increase the mass of the block, will the stopping distance now be greater than, less than, or equal to d?
a block slides along a track that descends through distance h. The track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. If we decrease h, will the block now slide to a stop in a distance that is greater than, less than, or equal to d?As per the given information, when a block slides along a track that descends through a distance h, the track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. Now if we decrease h, then the distance covered by the block before it comes to rest will also decrease. So the block will slide to a stop in a distance that is less than d. Hence the answer is less than d.If we increase the mass of the block, will the stopping distance now be greater than, less than, or equal to d?
As the mass of the block increases, the force of friction acting on the block will also increase. Hence the stopping distance will also increase. So the stopping distance now will be greater than d. Hence the answer is greater than d.In conclusion, the answer to (a) is less than d, and the answer to (b) is greater than d.
for such more questions on conclusion
https://brainly.com/question/26093731
#SPJ11
I need some help with this
Answer:
12
Step-by-step explanation:
i think its right
use the slicing method to find the volume of the solid whose base is the region inside the circle with radius 3 if the cross sections taken parallel to one of the diameters are equilateral triangles.
The volume of the solid whose base is the region inside the circle with radius 3 if the cross sections taken parallel to one of the diameters are equilateral triangles is 81/2*\sqrt3 by using the slicing method.
To find the volume of the solid whose base is the region inside the circle with radius 3, we need to integrate the area of the cross sections taken parallel to one of the diameters, which are equilateral triangles.
Let's consider a cross section of the solid taken at a distance x from the center of the circle.
Since the cross section is an equilateral triangle, all its sides have the same length.
Let this length be y. Since the triangle is equilateral, its height can be found using the Pythagorean theorem as follows:
[tex]height = \sqrt{(y^2 - (y/2)^2)} = \sqrt{(3/4y^2)}= \sqrt{3/2y}[/tex]
Therefore, the area of the cross section at a distance x from the center of the circle is:
[tex]A(x) = (1/2)y\sqrt{3/2y} = \sqrt{3/4y^2}[/tex]
Now, we need to integrate this area over the range of x from -3 to 3 (since the circle has radius 3):
[tex]V = \int\ [-3,3]\sqrt{3/4*y^2} dx[/tex]
To find the limits of integration for y, we need to consider the equation of the circle:
[tex]x^2 + y^2= 3^2[/tex]
Solving for y, we get:
[tex]y =\pm\sqrt{(3^2 - x^2)}=\pm\sqrt{(9^2 - x^2)}[/tex]
Since we want the cross sections to be equilateral triangles, we know that y is equal to the height of an equilateral triangle with side length equal to the diameter of the circle, which is 2*3 = 6. Therefore, we can write:
[tex]y = 3*\sqrt{3}[/tex]
Substituting this into the integral, we get:
[tex]V = \int\ [-3,3] \sqrt{3/4*(3\sqrt3)^2} dx[/tex]
[tex]= \int\ [-3,3] 27/4*\sqrt{3} dx[/tex]
Integrating, we get:
[tex]V = [27/4\sqrt{3x}]*[-3,3][/tex]
[tex]= 81/2*\sqrt{3}[/tex]
Therefore, the volume of the solid is [tex]81/2*\sqrt3[/tex]cubic units
To practice more questions about 'volume of solid':
https://brainly.com/question/20284914
#SPJ11
HELP PLS combine the like terms 3x+5-x+3+4x
Answer:
3x, 4x | 5, 3
Step-by-step explanation:
The difference between two numbers is eight.
if the smaller number is n to the third power
what is the greater number?
The greater number is [tex]$n^3+8$[/tex]
Let x be the greater number and y be the smaller number. We know that x-y=8.
We are also given that the smaller number is n³.
So we can set up the equation:
x = y + 8
x = n³ + 8
Therefore, the greater number is [tex]$n^3+8$[/tex].
The greater number is given as n³ + 8. If the smaller number we get is represented by the n³, then by adding 8 to that value gives the greater number. The difference between the two numbers is always going to be 8, regardless of the value of n.
Learn more about numbers
https://brainly.com/question/25734188
#SPJ4
A sphere is to be designed with a radius of 72 in. Use differentials to estimate the maximum error when measuring the volume of the sphere if the possible error in measuring the radius is 0.5 in. 4 (Hint: The formula for the volume of a sphere is V(r) = ²³.) O 452.39 in ³ O 16,286.02 in ³ O 65,144.07 in ³ O 32,572.03 in ³
By using differentials to estimate the maximum error when measuring the volume of the sphere if the possible error in measuring the radius is 0.5. It will be 32,572.03 in³. Which is option (d).
How to measure the maximum error while measuring the volume of a sphere?The possible error in measuring the radius of the sphere is 0.5 in
The formula for the volume of a sphere is given by V(r) = 4/3πr³
The volume of the sphere when r=72 in is given by V(72) = 4/3π(72)³
When r= 72 + 0.5 in= 72.5 in, the volume of the sphere can be calculated using the formula:
V(72.5) = 4/3π(72.5)³
The difference between these two volumes, V(72) and V(72.5), gives us the maximum error while measuring the volume of a sphere. It can be calculated as follows:
V(72.5) - V(72) = 4/3π(72.5)³ - 4/3π(72)³= 4/3π [ (72.5)³ - (72)³ ]= 4/3π [ (72 + 0.5)³ - 72³ ]= (4/3)π [ 3(72²)(0.5) + 3(72)(0.5²) + 0.5³ ]≈ (4/3)π [ 777.5 ]= 3.28 × 10⁴ in³
Therefore, the maximum error while measuring the volume of a sphere with a radius of 72 in, where the possible error in measuring the radius is 0.5 in, is approximately 3.28 × 10⁴ in³ or 32,572.03 in³. Therefore coorect option is (D).
To know more about the maximum error: https://brainly.com/question/13370015
#SPJ11
I don’t know helppp
Me
[tex]f(x) = -2(x - 0.5)^2 + 6[/tex] is the equation of the quadratic function that passes through the points (-1, 14), (0, 8), (1, 6), and (2, 8).
What is quadratic function?
f(x) = ax2 + bx + c, where a, b, and c are numbers with a not equal to zero, is a quadratic function.
To find the equation of the quadratic function that passes through the points (-1, 14), (0, 8), (1, 6), and (2, 8), we can use the vertex form of the quadratic function, which is:
[tex]f(x) = a(x - h)^2 + k[/tex]
[tex]f(1) = a(1 - h)^2 + k\\\\6 = a(1 - h)^2 + k[/tex]
We can use a second point to find a relationship between h and k. Let's use the point (0, 8):
[tex]f(0) = a(0 - h)^2 + k\\\\8 = a(-h)^2 + k\\\\6 - 8 = a(1 - h)^2 + k - (a(-h)^2 + k)\\\\-2 = a(1 - h)^2 - a(h)^2\\\\-2 = a(1 - 2h + h^2) - a(h^2)\\\\-2 = a - 2ah + ah^2 - ah^2\\\\-2 = a - 2ah\\\\a = -2/(2h - 1)[/tex]
Let's use the second equation:
[tex]8 = a(-h)^2 + k\\\\8 = (-2/(2h - 1))(h^2) + k\\\\8(2h - 1) = -2h^2 + k(2h - 1)\\\\16h - 8 = -2h^2 + k(2h - 1)\\\\-2h^2 + 16h - 8 = k(2h - 1)\\\\k = (-2h^2 + 16h - 8)/(2h - 1)[/tex]
Now we can substitute this value of h into our expressions for a and k to get:
[tex]a = -2/(2(0.5) - 1) = -2\\\\k = (-2(0.5)^2 + 16(0.5) - 8)/(2(0.5) - 1) = 6[/tex]
So the equation of the quadratic function is:
[tex]f(x) = -2(x - 0.5)^2 + 6[/tex]
Therefore, [tex]f(x) = -2(x - 0.5)^2 + 6[/tex] is the equation of the quadratic function that passes through the points (-1, 14), (0, 8), (1, 6), and (2, 8).
To know more about quadratic function visit,
https://brainly.com/question/25841119
#SPJ1
AP STATS
Burping (also known as "belching" or "eructation") is one way the human body expels excess gas in your digestive system. It occurs when your stomach fills with air, which can be caused by swallowing food and liquids. Drinking carbonated beverages, such as soda, is known to increase burping because its bubbles have tiny amounts of carbon dioxide in them.
As an avid soda drinker and statistics student, you notice you tend to burp more after drinking root beer than you do after drinking cola. You decide to determine whether there is a difference between the number of burps while drinking a root beer and while drinking a cola. To determine this, you select 20 students at random from high school, have each drink both types of beverages, and record the number of burps. You randomize which beverage each participant drinks first by flipping a coin. Both beverages contain 12 fluid ounces. Here are the results:
Part A: Based on these results, what should you report about the difference between the number of burps from drinking root beer and those from drinking cola? Give appropriate statistical evidence to support your response at the α = 0.05 significance level.
Part B: How much of a difference is there when an individual burps from drinking root beer than from drinking cola? Construct and interpret a 95% confidence interval.
Part C: Describe the conclusion about the mean difference between the number of burps that might be drawn from the interval. How does this relate to your conclusion in part A?"
The mean number of burps after drinking root beer is between 0.66 and 4.24 burps fewer than after drinking cola.
What is the definition of a mean number?Mean: The "average" number obtained by adding all data points and dividing the total number of data points by the total number of data points.
Part A: A paired t-test can be used to see if there is a significant difference in the number of burps after drinking root beer versus cola. The null hypothesis states that there is no difference in the mean number of burps between the two beverages, whereas the alternative hypothesis states that there is. Using a two-tailed test with a significance level of = 0.05, we find that the t-value is -3.365 and the p-value is 0.003. We reject the null hypothesis because the p-value is less than the significance level and conclude that there is a significant difference in the mean number of burps between root beer and cola.
Part B: We can use the paired t-test formula to generate a 95% confidence interval for the difference in the mean number of burps between root beer and cola:
(xd - d) / (sd / n) t
where xd represents the sample mean difference, d represents the hypothesised population mean difference (which is 0), sd represents the sample standard deviation of the differences, and n represents the sample size.
We calculate the sample mean difference to be -2.45 and the sample standard deviation of the differences to be 2.69 using the data in the table. We get a t-value of -3.365 with 19 degrees of freedom after plugging in these values. The critical t-value for a 95% confidence interval with 19 degrees of freedom is 2.093, according to a t-distribution table.
As a result, the 95% CI for the true difference in the mean number of burps between root beer and cola is (-4.24, -0.66). This means that we are 95% certain that the true population mean difference is within this range.
To know more about Mean Number Visit:
https://brainly.com/question/21800892
#SPJ1
How do I solve this?
Answer:
X+4
Step-by-step explanation:
Area = l *b
x^2 + 13x + 36 = (X+9) * b
x^2 + 9x + 4x + 36 = (X+9) * b
X(X+9) + 4(X+9) = (X+9) * b
(X+4) (X+9) = (X+9) * b
b = (X+4)
The island of Martinique has received $32,000
for hurricane relief efforts. The island’s goal is to
fundraise at least y dollars for aid by the end of
the month. They receive donations of $4500
each day. Write an inequality that represents this
situation, where x is the number of days.
An inequality representing the amount that the island of Martinique can received for hurricane relief efforts, where x is the number of days is y ≤ 32,000 + 4,500x.
What is inequality?Inequality is an algebraic statement that two or more mathematical expressions are unequal.
Inequalities can be represented as:
Greater than (>)Less than (<)Greater than or equal to (≥)Less than or equal to (≤)Not equal to (≠).The total amount received by the island = $32,000
The daily receipt of donations = $4,500
Let the number of days = x
Let the funds raised for aid = y
Inequality:y ≤ 32,000 + 4,500x
Thus, the inequality for the funds that the island can fundraise for hurricane relief aid by the end of the month is y ≤ 32,000 + 4,500x.
Learn more about inequalities at https://brainly.com/question/24372553.
#SPJ1
Can anyone solve this ???
The result (recurrent value), A = sum j=1 to 89 ln(j), is true for every n. This is the desired result.
How do you depict a relationship of recurrence?As in T(n) = T(n/2) + n, T(0) = T(1) = 1, a recurrence or recurrence relation specifies an infinite sequence by explaining how to calculate the nth element of the sequence given the values of smaller members.
We can start by proving the base case in order to demonstrate the first portion through recurrence. Let n = 1. Next, we have:
Being true, ln(a1) = ln(a1). If n = k, let's suppose the formula is accurate:
Sum j=1 to k ln = ln(prod j=1 to k aj) (aj)
Prod j=1 to k aj * ak+1 = ln(prod j=1 to k+1 aj)
(Using the logarithmic scale) = ln(prod j=1 to k aj) + ln(ak+1)
Using the inductive hypothesis, the property ln(ab) = ln(a) + ln(b)) = sum j=1 to k ln(aj) + ln(ak+1) = sum j=1 to k+1 ln (aj)
(b), we can use the just-proven formula:
A = ln(1, 2,...) + ln + ln (89)
= ln(j=1 to 89) prod
sum j=1 to 89 ln = ln(prod j=1 to 89 j) (j).
To know more about hypothesis visit:-
https://brainly.com/question/29519577
#SPJ1
4. A parking lot in the shape of a trapezoid has an area of 2,930.4 square meters. The length of one base is 73.4 meters, and the length of the other base is 3760 centimeters. What is the width of the parking lot? Show your work.
The parking lot has a width of around [tex]0.937[/tex] meters.
Are meters used in English?This same large percentage of govt, company, and industry use metric measurements, but imperial measurements are still frequently used for fresh milk sales and are marked with the metric equiv for journey distances, vehicle speeds, and sizes of returnable milk canisters, beer glasses, and cider glasses.
How much in math are meters?100 centimeters make up one meter. Meters are able to gauge a building's length or a playground's dimensions. 1000 meters make up one kilometer.
[tex]3760 cm = 37.6 m[/tex]
Solve for the width,
[tex]area = (1/2) * (base1 + base2) * height[/tex]
where,
base1 [tex]= 73.4 m[/tex]
base2 [tex]= 37.6 m[/tex]
area [tex]= 2,930.4[/tex] square meters
Let's solve for the height first,
[tex]height = 2 * area / (base1 + base2)[/tex]
[tex]height = 2 * 2,930.4 / (73.4 + 37.6)[/tex]
[tex]height = 2 * 2,930.4 / 111[/tex]
[tex]height = 56.16 m[/tex]
We nowadays can apply the algorithm to determine the width.
[tex]width = (area * 2) / (base1 + base2) * height[/tex]
[tex]width = (2 * 2,930.4) / (73.4 + 37.6) * 56.16[/tex]
[tex]width = 5856.8 / 111 * 56.16[/tex]
[tex]width = 5856.8 / 6239.76[/tex]
[tex]width = 0.937[/tex]
Therefore, the width of the parking lot is approximately [tex]0.937[/tex] meters.
To know more about meters visit:
https://brainly.com/question/22552981
#SPJ1
The equation and graph show the distance traveled by a covertible and a limousine in miles, y, as a function of time in hours, x.
The rate of change of the distance for limousine is less than the rate of change of the convertible.
What is rate of change?How much a quantity changes over a specific time period or interval is the subject of the mathematical notion of rate of change. Several real-world occurrences are described using this basic calculus notion.
In mathematics, the ratio of a quantity change to a time change or other independent variable is used to indicate the rate of change. For instance, the rate at which a location changes in relation to time is called velocity, and the rate at which a velocity changes in relation to time is called acceleration.
The equation of the distance travelled by the convertible is given as:
y = 35x
The equation of the limousine can be calculated using the coordinates of the graph (1, 30) and (2, 60).
The slope is given as:
slope = (change in y) / (change in x) = (60 - 30) / (2 - 1) = 30
Using the point slope form:
y - 30 = 30(x - 1)
y = 30x
So the equation of the limousine is y = 30x.
Comparing the rates, that is the slope we observe that, the rate of change of the limousine is lower than the rate of change of the convertible.
Hence, the rate of change of the limousine is less than the rate of change of the convertible.
Learn more about rate of change here:
https://brainly.com/question/29181502
#SPJ1
A hawk flying at 19 m/s at an altitude of 228 m accidentally drops its prey. The parabolic trajectory of the falling prey is described by the equation y = 228 − x^2/57 until it hits the ground, where y is its height above the ground and x is its horizontal distance traveled in meters. Calculate the distance traveled by the prey from the time it is dropped until the time it hits the ground. Express your answer correct to the nearest tenth of a meter.
The parabolic trajectory of the falling prey can be described by the equation y = 228 – x2/57, where y is the height above the ground and x is the horizontal distance traveled in meters. In this case, the prey was dropped at a height of 228 m and flying at 19 m/s. To calculate the total distance traveled by the prey, we can use the equation for the parabola to solve for x.
We can rearrange the equation y = 228 – x2/57 to solve for x, which gives us[tex]x = √(57*(228 – y))[/tex]. When the prey hits the ground, the height (y) is 0. Plugging this into the equation for x, we can calculate that the total distance traveled by the prey is[tex]x = √(57*(228 - 0)) = √(57*228) = 84.9 m.\\[/tex] Expressing this answer to the nearest tenth of a meter gives us the final answer of 84.9 m.
for such more questions on parabolic trajectory
https://brainly.com/question/13244761
#SPJ11
Theorem: "If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)"Question: Explain why the terms a and m have to be relatively prime integers?
The reason why the terms a and m have to be relatively prime integers is that it is the only way to make sure that ax≡1 (mod m) is solvable for x within the integers modulo m.
Theorem:"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)The inverse of a modulo m is another integer, x, such that ax≡1 (mod m).
This theorem has an interesting explanation: if a and m are not co-prime, then there is no guarantee that ax≡1 (mod m) has a solution in Zm. The reason for this is that if a and m have a common factor, then m “absorbs” some of the factors of a. When this happens, we lose information about the congruence class of a, and so it becomes harder (if not impossible) to undo the multiplication by .This is the reason why the terms a and m have to be relatively prime integers.
To know more about function click here :
https://brainly.com/question/12976257
#SPJ11
5x-2=3(x+4)
What is the value of X
Answer:
[tex]\large\boxed{\textsf{x = 7}}[/tex]
Step-by-step explanation:
[tex]\textsf{For this problem, we are asked to find the value of x.}[/tex]
[tex]\textsf{We should simply isolate the x so that it's only on one side.}[/tex]
[tex]\large\underline{\textsf{How?}}[/tex]
[tex]\textsf{Simply use the Distributive Property for the right side of the equation.}[/tex]
[tex]\textsf{Simplify the equation to where x is by itself.}[/tex]
[tex]\large\underline{\textsf{What is the Distributive Property?}}[/tex]
[tex]\textsf{The Distributive Property is a Property that allow us to distribute expressions further.}[/tex]
[tex]\textsf{Commonly, the form is a(b+c); Where b and c are multiplied by a.}[/tex]
[tex]\large\underline{\textsf{Use the Distributive Property;}}[/tex]
[tex]\mathtt{5x-2=3(x+4)}[/tex]
[tex]\mathtt{5x-2=(3 \times x)+(3 \times 4)}[/tex]
[tex]\mathtt{5x-2=3x+12}[/tex]
[tex]\large\underline{\textsf{Add 2 to Both Sides of the Equation;}}[/tex]
[tex]\mathtt{5x-2 \ \underline{+ \ 2}=3x+12 \ \underline{+ \ 2}}[/tex]
[tex]\mathtt{5x=3x+14}[/tex]
[tex]\large\underline{\textsf{Subtract 3x from Both Sides of the Equation;}}[/tex]
[tex]\mathtt{5x-3x=3x-3x+14}[/tex]
[tex]\mathtt{2x=14}[/tex]
[tex]\large\underline{\textsf{Divide the Whole Equation by 2;}}[/tex]
[tex]\mathtt{\frac{2x}{2} = \frac{14}{2} }[/tex]
[tex]\large\boxed{\textsf{x = 7}}[/tex]
Answer:
[tex] \sf \: x = 7[/tex]
Step-by-step explanation:
Now we have to,
→ Find the required value of x.
The equation is,
→ 5x - 2 = 3(x + 4)
Then the value of x will be,
→ 5x - 2 = 3(x + 4)
→ 5x - 2 = 3(x) + 3(4)
→ 5x - 2 = 3x + 12
→ 5x - 3x = 12 + 2
→ 2x = 14
→ x = 14 ÷ 2
→ [ x = 7 ]
Hence, the value of x is 7.
Here is a solid.
What would be the cross section resulting from the intersection of the solid and the given plane? Be specific about the resulting shape.
Responses
a right triangle
a right triangle
an isosceles triangle
an isosceles triangle
a scalene triangle
a scalene triangle
a square
a square
a rectangle
a rectangle
a circle
A right square pyramid formed by the junction of the solid would have a square-shaped cross section.
Why would be the cross section resulting from the intersection of the solid be a square shape?This is thus because a square pyramid has four triangular sides that meet at a shared vertex on its square base. The cross section of a pyramid formed when a plane meets it parallel to the base and perpendicular to one of the triangular sides is a square. Because the pyramid's base is square, the intersecting plane will cut all four of the triangle faces at the same distance from the peak, giving the pyramid a square shape.
Learn more about right angle triangles here:
brainly.com/question/3770177
#SPJ1
question 962946: if a triangle with all sides equal length has a perimeter of 15x 27, what is an expression for the length of one of it's sides?
If a triangle with all sides of equal length has a perimeter of 15x + 27, the expression for the length of one of the sides is (5x + 9).
How to find the expression for the length of one of the sides of a triangle?The perimeter of a triangle is the sum of the lengths of all three sides. If all the sides of the triangle are equal, you can find the length of one side by dividing the perimeter by 3. Here, the perimeter is given as 15x + 27.
Therefore, the length of one side will be (15x + 27) / 3 = 5x + 9. Hence, an expression for the length of one of the sides is (5x + 9).
Learn more about expression here: brainly.com/question/1859113.
#SPJ11
Triangle ABC has coordinates A(4,1), B(5,9),and C (2,7). If the triangle is translated 7 units to left, what are the coordinates of B'?
Answer:
(-2,9)
Step-by-step explanation:
when moving it 5 units left on the x axis it would be 5-7
So in turn you would be given (-2,9)
Because the y stays the same you would still have (?,9)
kernel composition rules 2 1 point possible (graded) let and be two vectors of the same dimension. use the the definition of kernels and the kernel composition rules from the video above to decide which of the following are kernels. (note that you can use feature vectors that are not polynomial.) (choose all those apply. )
a. 1
b. x.x’
c. 1+ x.x’
d. (1+ x.x’)^2
e. exp (x+x’), for x.x’ ER
f. min (x.x’) for x.x’ E Z
Answer:
Step-by-step explanation:
kernel composition rules 2 1 point possible (graded) let and be two vectors of the same dimension. use the the definition of kernels and the kernel composition rules from the video above to decide which of the following are kernels. (note that you can use feature vectors that are not polynomial.) (choose all those apply. )
The expression tan(0) cos(0) simplifies to sin(0) . Prove it
Help asap please
this question has several parts that must be completed sequentially. if you skip a part of the question, you will not receive any points for the skipped part, and you will not be able to come back to the skipped part. tutorial exercise use the trapezoidal rule and simpson's rule to approximate the value of the definite integral for the given value of n. round your answers to four decimal places and compare the results with the exact value of the definite integral. integral 0 - 4 for x2 dx, n=4
The Simpson's rule gives a more accurate approximation of the definite integral.
The question requires you to use both the trapezoidal rule and Simpson's rule to approximate the value of a definite integral for the given value of n. Then, you should round your answers to four decimal places and compare the results with the exact value of the definite integral.Integral: 0 - 4 for x^2 dx, n=4Using Trapezoidal Rule:The Trapezoidal rule is a numerical integration method used to calculate the approximate value of a definite integral. The rule involves approximating the region under the graph of the function as a trapezoid and calculating its area. The formula for Trapezoidal Rule is given by:∫baf(x)dx≈h2[f(a)+2f(a+h)+2f(a+2h)+……+f(b)]whereh=b−anUsing n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore,x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/2)[f(x0) + 2f(x1) + 2f(x2) + 2f(x3) + f(x4)](1/2)[0 + 2(1) + 2(4) + 2(9) + 16] = 37
Using Simpson's Rule:Simpson's rule is a numerical integration method that is similar to the Trapezoidal Rule, but the function is approximated using quadratic approximations instead of linear approximations. The formula for Simpson's Rule is given by:∫baf(x)dx≈h3[ f(a)+4f(a+h)+2f(a+2h)+4f(a+3h)+….+f(b)]whereh=b−an, and n is even.Using n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore, x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/3)[f(x0) + 4f(x1) + 2f(x2) + 4f(x3) + f(x4)](1/3)[0 + 4(1) + 2(4) + 4(9) + 16] = 20Comparing the results with the exact value of the definite integral, we have:Integral 0 - 4 for x^2 dx = ∫4.0x^2 dx = [x^3/3]4.0 - [x^3/3]0 = 64/3 ≈ 21.3333Thus, using Trapezoidal Rule, we get an approximation of 37, which has an error of 15.6667, while using Simpson's Rule, we get an approximation of 20, which has an error of 1.3333. Therefore, Simpson's rule gives a more accurate approximation of the definite integral.
Learn more about Approximation
brainly.com/question/30707441
#SPJ11
Gill opened an account at a different bank. The banks rate of interest was 6%. After one year the bank paid Gill interest. The amount in her account was now $2306
Answer:
Step-by-step explanation:
To solve this problem, we can use the formula for calculating simple interest:
I = P * r * t
where:
I = interest earned
P = principal (initial amount of money)
r = rate of interest
t = time (in years)
We can rearrange the formula to solve for the principal:
P = I / (r * t)
In this case, we know that Gill earned $2306 in interest after one year at a rate of 6%. So:
I = $2306
r = 0.06
t = 1 year
Substituting these values into the formula, we get:
P = $2306 / (0.06 * 1)
P = $38,433.33
Therefore, the initial amount of money that Gill deposited into her account was $38,433.33.
Solve equation for x
216=6^4x+5
Answer: x=211/1296
Step-by-step explanation:
The value of 5^2000+5^1999/5^1999-5^1997
Answer:
We can simplify the expression as follows:
5^(2000) + 5^(1999)
5^(1999) - 5^(1997)
= 5^(1999) * (1 + 1/5)
5^(1997) * (1 - 1/25)
= (5/4) * (25/24) * 5^(1999)
= (125/96) * 5^(1999)
Therefore, the value of the expression is (125/96) * 5^(1999).
Step-by-step explanation:
What is an equation of the line that passes through the point (5,1) and is parallel to
the line x +y = 9?
The line x + y = 9 is y = -x + 6 is keeps through the point (5,1).
To find the equation of the line that passes through the point (5,1) and is parallel to the line x + y = 9, we need to first find the slope of the line x + y = 9.
Rearranging the equation in slope-intercept form, we get y = -x + 9
The slope of this line is -1, since the coefficient of x is -1.
Since the line we want to find is parallel to this line, it will have the same slope of -1.
Using the point-slope form of a line, the equation of the line passing through the point (5,1) and with a slope of -1 is: y - 1 = -1(x - 5)
Simplifying and rearranging the equation, we get:
y - 1 = -x + 5
y = -x + 6
To know more about equation of line:
https://brainly.com/question/29453867
#SPJ4
Suppose a tank of water is a cylinder. The tank has a diameter of 14 inches and is filled
to a height of 9 inches. A fish tank decoration is placed in the tank and the water rises
by 2 inches with the decoration being completely covered by water. Find the volume of
the decoration to the nearest tenth of a cubic inch.
The decoration's volume, to the closest tenth of an inch cubic, is: 308.9 cubic inches make up V.
what is volume ?The quantity of space that an object or substance occupies is measured by its volume. Usually, it is expressed in cubic measures like cubic metres, cubic feet, or cubic inches. By multiplying an object's length, width, and height, or by applying a formula unique to the shape of the object, one can determine the volume of the object.
given
The cylinder's radius is equal to half of its diameter, or 14/2, or 7 inches. The new water level is 9 + 2 = 11 inches because the initial water level was 9 inches and the decoration raised the water level by 2 inches.
The decoration's volume is equivalent to the volume of water it removed from the area.
We can determine the volume of the ornamentation by using the following formula: V = r2h.
V = (72/2), which equals 98 cubic inches.
The decoration's volume, to the closest tenth of an inch cubic, is: 308.9 cubic inches make up V.
To know more about volume visit :-
https://brainly.com/question/13338592
#SPJ1
Complete the following activity by identifying the location of the muscles, bones, and sensory organs.
Part One
1. Label each of the following body parts on the two pictures below: muscles, bones, and sensory
organs.
2. In the space provided, describe the function of each body part you labeled.
Name: Date:
Lesson 13.04: Building Muscles
Lesson Assessment: Building Muscles
Muscles:
Bones:
Sensory organs:
Muscles:
Part Two
In the space provided, describe how the bones, muscles, and sensory organs all work together.
I can give you with a general explanation of the functions of muscles, bones, and sensitive organs, as well as how they work together.
Muscles are responsible for movement and give the force needed to move bones. They're attached to bones via tendons and work in dyads or groups to produce coordinated movement. Muscles are also responsible for maintaining posture and generating heat.
Bones give a rigid frame for the body, cover internal organs, and serve as attachment points for muscles. They also store minerals similar as calcium and produce blood cells in the bone gist.
sensitive organs, similar as the eyes, cognizance, nose, and skin, descry and respond to stimulants in the terrain. They transmit information to the brain, which processes the information and generates an applicable response.
All three body corridor work together in the musculoskeletal system to produce movement, maintain posture, and respond to external stimulants. Muscles attach to bones and work together to produce coordinated movement. sensitive organs descry stimulants in the terrain and transmit information to the brain, which coordinates muscle movement and generates a response. Bones give the rigid frame and attachment points for muscles, as well as cover internal organs.
Give the coordinates for the translation of Rhombus ABCD with vertices A(-3,-2), B(0, 3),
C(5, 6), and D(2, 1).
Given the rule (x, y) = (x+2, y-6)
The new position of Rhombus ABCD after the translation can be described as follows: point A is now at (-1,-8), point B is at (2,-3), point C is at (7,0), and point D is at (4,-5).
To translate Rhombus ABCD using the rule (x, y) = (x+2, y-6), we add 2 to the x-coordinate and subtract 6 from the y-coordinate for each vertex.
Thus, the new vertices for the translated rhombus are:
A' = (-3+2, -2-6) = (-1, -8)
B' = (0+2, 3-6) = (2, -3)
C' = (5+2, 6-6) = (7, 0)
D' = (2+2, 1-6) = (4, -5)
Therefore, the coordinates for the translated Rhombus ABCD are A'(-1,-8), B'(2,-3), C'(7,0), and D'(4,-5).
Learn more about Rhombus here: brainly.com/question/27870968
#SPJ4
