Part C – RC Circuits in AC Mode 1. Derive Equation 5-6 from Equation 5-5. 2. Using the τ’s you calculated and your measured resistance: a. Calculate the capacitances of the capacitors. b. Compare your calculated and measured values via percent error.

Answer:

375 is the answer.

Explanation:

Speed : Distance / Time taken

S: m/ s

s: 1500/4

375 m / s answer

Answer:

375m per minute

Explanation:

if you are looking for a diffrent unit just multiply your answer by however many minutes are in that time frame

Answer:

a) Fnet = mg - Fb - Fr

b) 8.67 secs

Explanation:

mass of object = 80 kg

Buoyancy force = 1/50 * weight ( 80 * 9.81 ) = 15.696

Proportionality constant = 10 N-sec/m

a) Calculate  equation of motion of the object

Force of resistance on object  due to water = Fr ∝ V

                                                                         = Fr = Kv = 10 V

Given that : Fb( due to buoyancy ) , Fr ( Force of resistance ) acts in the positive y-direction on the object  while mg ( weight ) acts in the negative y - direction on the object.

Fnet = mg - Fb - Fr

∴ Equation of motion of the object ( Ma = mg - Fb - Fr )

b) Calculate how long before velocity of the object hits 40 m/s

Ma = mg - Fb - Fr

a = 9.81 - 0.1962 - 0.125 V = 9.6138 - 0.125 V

V = u + at ---- ( 1 )

u = 0

V = 40 m/s

a = 9.6138 - 0.125 V

back to equation 1

40 = 0 + ( 9.6138 - 0.125 (40) ) t

40 = 4.6138 t

∴ t = 40 / 4.6138 = 8.67 secs

All these people perform similar duties due to their similar profession.

All these People are the astronomers so they used various instruments that are present at their time in order to study the heavenly bodies such as stars and planets present in the sky. They also analyze their findings with the help of researches and experiments. They also develop theories that are based on personal observations and tested the theories of other astronomers in order to verify their theories.

https://brainly.com/question/24373447

Answer:

Explanation:

The best way to do this is to remember the rule about the halfway mark in a parabolic path. At a trajectory's half way point in its travels, it will be at its max height. To get the total time in the air, we take that time at half way and double it. Here's what we know that we are told:

initial velocity is 20 m/s

Here's what we know that we are NOT told:

a = -9.8 m/s/s and

final velocity is 0 at an object's max height in parabolic motion.

We will use the equation:

[tex]v=v_0+at[/tex] where v is final velocity and v0 is initial velocity. Filling in:

0 = 20 + (-9.8)t and

-20 = -9.8t so

t = 2 seconds. The stone reaches its max height 2 seconds after it is thrown; that means that after another 2 seconds it will be on the ground. Total air time is 4 seconds.

Answer:

V = V0 + a t

V = 75 - 9.8 * 3 = 45.6 m/s

The final velocity of the projectile after 3 seconds is equal to 45.6 m/s.

The equations of motion can be defined as the relation of the motion of a physical system as the function of time and set up the relationship between the displacement (s), acceleration, velocity (v & u), and time of a moving system.

Given, the initial velocity of the projectile, u = 75 m/s

The time taken by the projectile, t = 3 sec

The acceleration due to gravity upward, g = - 9.8 m/s²

From the first equation of motion we can calculate the final velocity of the projectile:

v = u + at

v = u - gt

v = 75 - 9.8 ×(3)

v = 75 - 29.4

v = 45.6 m/s

Therefore, the final velocity of the projectile after three seconds is 45.6 m/s.

Learn more about the equation of motion, here:

brainly.com/question/16982759

#SPJ2

Answer:

The angle is 153.9 degree.

Explanation:

Let the magnetic field is B and the charge is q. Angle = 26.1 degree

The force is F.

Let the angle is A'.

Now equate the magnetic forces

[tex]q v B sin 26.1 = q v B sin A'\\\\A' = 180 - 26.1 = 153.9[/tex]

E= [tex]\frac{1}{2}[/tex]×k×x² = 1J

given k=800n/m x=0.05m

We have that  the ratio of his walking pace  to the walking pace of a person of average height is

[tex]\frac{V_2}{V_1}=1.10[/tex]

given the assumption and the calculation given below

From the question we are told that:

Consider a person 18\% shorter than average

Let average height of a person be [tex]10m[/tex]

Therefore

The height of an [tex]18\%[/tex] shorter man is mathematically given as

H=10*0.18

H=8.2m

Generally, the equation for velocity is mathematically given by

[tex]v=\frac{1}{2\pi} \sqrt{{g}{l}}[/tex]

Where we have the  Assumption that a person's leg swings like a pendulum and that the angular amplitude of everybody's stride is about the same

Therefore

[tex]\frac{V_1}{V_2}=\frac{l_1}{l_2}[/tex]

[tex]\frac{V_1}{V_2}={82}{100}[/tex]

[tex]\frac{V_2}{V_1}=1.10[/tex]

In conclusion

The ratio of his walking pace (that is, the frequency 'f' of his motion) to the walking pace of a person of average height is

[tex]\frac{V_2}{V_1}=1.10[/tex]

For more information on this visit

https://brainly.com/question/21196186

Answer:

The correct answer is "4.443 sec".

Explanation:

Given:

Mass of child,

= 34 kg

Mass of swing,

= 18 kg

Length,

= 4.9 m

The time period of pendulum will be:

T = [tex]2 \pi \sqrt{4g}[/tex]

  = [tex]2 \pi \sqrt{\frac{4.9}{9.8} }[/tex]

  = [tex]4.443 \ sec[/tex]  

Answer:

The time taken to back and forth is 4.4 s .

Explanation:

Length, L = 4.9 m

let the time period is T.

Acceleration due to gravity, g = 9.8 m/s^2

Use the formula of time period

[tex]T = 2 \pi\sqrt{L}{g}\\\\T = 2 \times 3.14\sqrt{4.9}{9.8}\\\\T = 4.4 s[/tex]

Answer:

The longest wavelength for closed at one end and open at the other is

y / 4      where y is the wavelength - that is node - antinode

The next possible wavelength is 3 y / 4 -    node - antinode - node -antinode

y / 4 = 3 m     y = 12 meters    the longest wavelength

3 y / 4 = 3 m      y = 4 meters   1 / 3 times as long

The acceleration of the block over the rough surface is 1.22625 m/s²

The process through which the acceleration is obtained is presented as follows of approach to

The given parameters are;

Mass of block, m = 2 kg

Nature of the surface of the quarter circle = Frictionless

The length of the horizontal, d = 8 m

The coefficient of friction of the horizontal surface, μ = 0.4

The unknown parameter;

The acceleration of the block over the rough surface

Method;

Find the work done by friction to stop the block and divide the result by the mass of the block

The work done by friction, [tex]W_f[/tex] = (Force of friction) × (Distance the block moves on the rough surface before coming to rest)

[tex]\mathbf{W_f}[/tex] = [tex]\mathbf{F_f}[/tex] × d

[tex]F_f[/tex] = Normal reaction of surface on block, [tex]N_r[/tex] × μ

Normal reaction on block, [tex]\mathbf{N_r}[/tex] = Weight of block

[tex]\mathbf{N_r}[/tex] ≈ 2 kg × 9.81 m/s² = 19.62 N

Therefore;

The work done by friction [tex]\mathbf{W_f}[/tex] = [tex]\mathbf{F_f}[/tex] × d = [tex]\mathbf{N_r}[/tex] × μ × d

[tex]\mathbf{W_f}[/tex] = 19.62 N × 0.4 × 8 m = 62.784 J

The work done by the block, W = Force, F × d

Force, F = m × a

Where;

a = The acceleration of the block

According to the principle of conservation of energy, we have;

[tex]\mathbf{W_f}[/tex]  = W

∴ 19.62 J = 2 kg × a × 8 m

a = 19.62/(2 kg × 8 m) = 1.22625 m/s²

The acceleration of the block over the rough surface, a = 1.22625 m/s²

Learn more about work done due and friction here;

https://brainly.com/question/21854305

https://brainly.com/question/1942288

Answer:

Energy = .13 W / m^2      energy of incident energy

N = 3500 Watts / day       power needed

N = 3500 Watts  (3600 * 24 sec) = .0405 Watts/sec

The problem must mean that one needs 3.5 Kw-days

3.5 Kw-days = 3500 watts * 86400 sec = 3.02E8 joules

150 J/sec-m^2 * .13 = 19.5 J / sec-m^2      usable energy

In one day 19.5 J/sec-m^2 = 1.68E6 J/m^2    usable energy received

Area = 3.028E8 J / 1.68E6 J/m2 = 180 m^2

One would need 180 m^2 of solar panels

That's quite a lot of energy

A 1100 watt microwave oven uses 1.1 kW while running so 3.5 kW for 24 hours seems to be quite a lot.

[tex]\textsf{When an electron is hit by a }[/tex] [tex]\textsf{photon of light, it absorbs the quanta}[/tex] [tex]\textsf{of energy the photon was carrying}[/tex] [tex]\textsf{and moves to a higher energya}[/tex] [tex]\textsf{ state. Electrons therefore have to }[/tex] [tex]\textsf{jump around within the atom as }[/tex] [tex]\textsf{they either gain or lose energy. }[/tex]

When an electron is hit by a photon of light, it absorbs the quanta of energy the photon was carrying and moves to a higher energy state. Electrons therefore have to jump around within the atom as they either gain or lose energy.

Hope this answer helps you..!!!

.

.

Select it as the BRAINLIEST..!!

Answer:

the magnitude of the magnetic force on the wire segment is 6.03 x 10⁻⁶ N

Explanation:

Given;

length of the conductor, L = 1 cm = 0.01 m

current carried by the solenoid, I₁ = 15 A

radius of the solenoid, r = 4 cm

number of turns per length of the solenoid, n = 800 turns/m

current carried by the solenoid, I₂ = 40 mA = 0.04 A

The magnetic field of the solenoid is calculated as;

B = μnI₂

where;

μ is the permeability of free space = 4π x 10⁻⁷ Tm/A

B = ( 4π x 10⁻⁷) x (800) x (0.04)

B = 4.022 x 10⁻⁵ T

The magnitude of the magnetic force on the wire segment is calculated as;

F = BI₁L sinθ

where

θ is the angle made by the wire segment against the solenoid = 90⁰

F = (4.022 x 10⁻⁵) x (15) x (0.01) x sin(90)

F = 6.03 x 10⁻⁶ N

Therefore, the magnitude of the magnetic force on the wire segment is 6.03 x 10⁻⁶ N

Answer:

A tensor is a quantity, for example a stress or a strain, which has magnitude, direction, and a plane in which it acts. Stress and strain are both tensor quantities. ... A tensor is a quantity, for example a stress or a strain, which has magnitude, direction, and a plane in which it acts.

Inertia Tensor. where I = the inertia tensor. The angular momentum of a rigid body rotating about an axis passing through the origin of the local reference frame is in fact the product of the inertia tensor of the object and the angular velocity. ... As shown in [7], the inertia tensor is symmetric.

Explanation:

Hope dis help

Answer:

(a) The self inductance, L = 21.95 mH

(b) The energy stored, E = 4.84 J

(c) the time, t = 0.154 s

Explanation:

(a) Self inductance is calculated as;

[tex]L = \frac{N^2 \mu_0 A}{l}[/tex]

where;

N is the number of turns = 1000 loops

μ is the permeability of free space = 4π x 10⁻⁷ H/m

l is the length of the inductor, = 45 cm = 0.45 m

A is the area of the inductor (given diameter = 10 cm = 0.1 m)

[tex]A = \pi r^2 = \frac{\pi d^2}{4} = \frac{\pi \times (0.1)^2}{4} = 0.00786 \ m^2[/tex]

[tex]L = \frac{(1000)^2 \times (4\pi \times 10^{-7}) \times (0.00786)}{0.45} \\\\L = 0.02195 \ H\\\\L = 21.95 \ mH[/tex]

(b) The energy stored in the inductor when 21 A current ;

[tex]E = \frac{1}{2}LI^2\\\\E = \frac{1}{2} \times (0.02195) \times (21) ^2\\\\E = 4.84 \ J[/tex]

(c) time it can be turned off if the induced emf cannot exceed 3.0 V;

[tex]emf = L \frac{\Delta I}{\Delta t} \\\\t = \frac{LI}{emf} \\\\t = \frac{0.02195 \times 21}{3} \\\\t = 0.154 \ s[/tex]

a) y(max)  = 337.76 m

b) t₁ = 5.30 s  the time for y maximum

c)t₂ =  13.60 s  time for y = 0 time when the fly finish

d) vₓ = 30 m/s        vy = - 81.32 m/s

e)x = 408 m

Equations for projectile motion:

v₀ₓ = v₀ * cosα          v₀ₓ = 60*(1/2)     v₀ₓ = 30 m/s   ( constant )

v₀y = v₀ * sinα           v₀y = 60*(√3/2)     v₀y = 30*√3  m/s

a) Maximum height:

The following equation describes the motion in y coordinates

y  =  y₀ + v₀y*t - (1/2)*g*t²      (1)

To find h(max), we need to calculate t₁ ( time for h maximum)

we take derivative on both sides of the equation

dy/dt  = v₀y  - g*t

dy/dt  = 0           v₀y  - g*t₁  = 0    t₁ = v₀y/g

v₀y = 60*sin60°  = 60*√3/2  = 30*√3

g = 9.8 m/s²

t₁ = 5.30 s  the time for y maximum

And y maximum is obtained from the substitution of t₁  in equation (1)

y (max) = 200 + 30*√3 * (5.30)  - (1/2)*9.8*(5.3)²

y (max) = 200 + 275.40 - 137.64

y(max)  = 337.76 m

Total time of flying (t₂)  is when coordinate y = 0

y = 0 = y₀  + v₀y*t₂ - (1/2)* g*t₂²

0 = 200 + 30*√3*t₂  - 4.9*t₂²            4.9 t₂² - 51.96*t₂ - 200 = 0

The above equation is a second-degree equation, solving for  t₂

t =  [51.96 ±√ (51.96)² + 4*4.9*200]/9.8

t =  [51.96 ±√2700 + 3920]/9.8

t =  [51.96 ± 81.36]/9.8

t = 51.96 - 81.36)/9.8         we dismiss this solution ( negative time)

t₂ =  13.60 s  time for y = 0 time when the fly finish

The components of the velocity just before striking the ground are:

vₓ = v₀ *cos60°       vₓ = 30 m/s  as we said before v₀ₓ is constant

vy = v₀y - g *t        vy = 30*√3  - 9.8 * (13.60)

vy = 51.96 - 133.28         vy = - 81.32 m/s

The sign minus means that vy  change direction

Finally the horizontal distance is:

x = vₓ * t

x = 30 * 13.60  m

x = 408 m

Answer:

The initial velocity is 1.27 m/s.

Explanation:

distance, s = 1.8 m

acceleration, a = - 0.45 m/s^2

final velocity, v = 0

let the initial velocity is u.

Use third equation of motion

[tex]v^2 = u^2 + 2 a s \\\\0 = u^2 - 2 \times 0.45\times 1.8\\\\u = 1.27 m/s[/tex]

We have that the Initial velocity  is mathematically given as

u=1.27m/s

Question Parameters:

a slight push toward an end stop 1.80 meters away

he fan of the cart engages and slows the cart with an acceleration of -0.45 m/s2

Generally the equation for the  third equation of motion    is mathematically given as

Vf^2 = Vi^2 + 2ad

Therefore

0=u^2+0.45*1.8

u=1.27m/s

For more information on velocity visit

https://brainly.com/question/17617636

Answer:

C

Explanation:

intensity = Power delivered by the sound (Watt)/ Surounding Area (m²)

I = P/A

A = πr²

r = is the distance between you and the cricket.

so in other form we can get

I = P/πr²

let take I(1) as first intensitilynyou heard and I(2) as the increased intensity.

I(1) / I(2) = r(2)² / r(1)²

1/4 = r(2)²/r(1)²

1/2 = r(2) / r(1)

r(2) = ½ r(1)

or r(2) is decreaases by a factor of 2.

Answer:

red blood cell, also called erythrocyte

Explanation:

Hope it helps

Mark me as Brainliest plz

:DD

Answer:

This causes the amplitude of the oscillation to decay over time. The damped oscillation frequency does not equal the natural frequency. Damping causes the frequency of the damped oscillation to be slightly less than the natural frequency

The answer is 40 kg. m/s.

Formula for momentum:

p=mv

p=(10 kg.)(4 m/s)

So, therefore, the final answer is p=40 kg. m/s.

I hope this helped answer your question. Enjoy your day, and take care!

Answer: its 400 n/s

Explanation:

cus my thing said it was right

Answer:

The probability that Susan turns 85 years old is 45,436/97,825= 0.4644.

Explanation:

Edmentum

Answer:

45,436/97,825= 0.4644.

Answer:

rock go down

Explanation:

what comes up must come down.

Answer:

The rate of doing work is called power.

Answer:

The amount of energy transported or transformed per unit time is referred to as power in physics. The watt, which is equal to one joule per second in the International System of Units, is the unit of power.

OAmalOHopeO

Answer:

[tex]u=34cm[/tex]

Explanation:

From the question we are told that:

Far point is [tex]V=34 cm[/tex]

Near point is [tex]u=17 cm[/tex]

Therefore

Focal Length

[tex]f=-34cm[/tex]

Generally the equation for the Lens is mathematically given by

[tex]\frac{1}{u}=\frac{1}{f}-\frac{1}{v}[/tex]

[tex]\frac{1}{u}=\frac{1}{-34}-\frac{1}{-17}[/tex]

[tex]u=34cm[/tex]

Since the frequencies are unrelated, and there are a large number of them, I'll say this represents an example of noise.

Explanation:

mặt đất với vận tốc ban đầu 20m/s. Bỏ qua mọi ma sát, lấy g = 10 m/s2. Độ cao cực đại mà vật đạt được là.

Your Answer Is in this attachment