Answer:
1.12
Explanation:
it is correct on Acellus
The total force on charge q(3) is 1125 x [tex]10^{-3}[/tex] Newton
We have three charges in a straight line.
We have to find the force on charge q3 due to charge q1 and q2.
State Coulomb's law.The force between two point charges is directly proportional to the product of the magnitude of two point charges and inversely proportional to the square of the distance between them. Mathematically-
[tex]F = \frac{1}{4\pi\epsilon_{o}}{\frac{qQ}{r^{2} } } }[/tex]
We have -
[tex]q_{1} =q_{2} =q_{3} = -5 \times 10^{-6} C[/tex]
The distance between -
[tex]q_{1}\;and\;q_{2} = q_{2} \;and\;q{3}[/tex] = 0.5 m
Now, Force on charge q(3) due to charge q(1) -
F(1 → 3) = [tex]\frac{1}{4\pi\epsilon_{o}}{\frac{5\times 10^{-6} \times 5\times 10^{-6} }{1^{2} } } } = 9\times 10^{9} \times 25 \times 10^{-12} = 225\times 10^{-3}[/tex] N (repelling force)
Force on charge q(3) due to charge q(2) can be calculate similarly as -
F(2 → 3) = 900 x [tex]10^{-3}[/tex] N(repelling force)
Now, both the forces are in same direction, so we can add them algebraically -
[tex]F_{net}[/tex] = F(1 → 3) + F(2 → 3) = 1125 x [tex]10^{-3}[/tex] N
Hence, the total force on charge q(3) is 1125 x [tex]10^{-3}[/tex] Newton
Hence, the wavelength of light in nano meters is 0.0177 x nm.
To solve more questions on Coulomb's law, visit the link below -
https://brainly.com/question/14110379
#SPJ2
please help me out i'm so depressed and such a failure
how does the brightness of the lamp (L) vary if we dispalce the cursor (C) of the rheostat
a)Towards A
b) Towards B
Answer:
I reckon towards b. Let me know if im right
What is the highest Mountain, and where is it?
Answer:
Mount Everest is Earth's highest mountain above sea level, located in the Mahalangur Himal sub-range of the Himalayas. The China–Nepal border runs across its summit point. Its elevation of 8,848.86 m was most recently established in 2020 by the Nepali and Chinese authorities.
Explanation:
Building a space station, in which astronauts would live for a considerable time, is essential even if the space station project were to contribute no new knowledge about space or Earth that could not otherwise be obtained. For future missions to explore Mars, we will need the medical knowledge that the space station project will give us about the limits of human capacities to live in spacecraft for an extended time.
The argument makes the assumption that
(A) the exploration of Mars will be carried out by people traveling in spacecraft and not by robots alone
(B) the capacities of astronauts are typical of those of ordinary human beings
(C) no unforeseen medical problems will arise on the first mission to explore Mars
(D) a mission to Mars will be the first of many missions that will explore the solar system
(E) living in spaceship for an extended time presents insurmountable medical problems
Answer:
The argument make the assumption that;
(A) The exploration of Mars will be carried out by people travelling in spacecraft and not by robots alone
Explanation:
The argument is made for the importance of a space station where astronauts live for an appreciable time to aid in the understanding of human capacities for living in the space so as to increase the successful space travel human to Mars, which is a distance further than the Moon and therefore, will require sufficient time travel
What is another name for constructive interference?
A. Up
B. Down
C. Reinforcement
D. Cancellation
Select the correct answer.
What does AC stand for in physics?
O A. alternating current
OB. alternative circuit
OC. alternating composition
OD. all charge
What type of reaction results in the formation of a salt?
3. What does an object at rest and an object moving at constant velocity have in common?
A 12 kg ball is rolling with a velocity of 10 m/s. How much kinetic energy does the ball have?
Answer:
600 J
Explanation:
KE = 1/2 mv^2
what is the another name ffo
Answer:
sorry buh I don't get the question
Explain the effects of expansion of water on aquatic life
Answer:
The anomalous expansion of water helps preserve aquatic life during very cold weather. When temperature falls, the top layer of water in a pond contracts, becomes denser and sinks to the bottom. If the temperature falls further, the top layer expands and remains on the top till it freezes.
A solenoid coil 10cm long has 40 turns cm-1. The current rises from zero to its maximum value of 5.0000 A and 0000.01s when the switch is closed. Find the energy stored in magnetic field if the area of cross section of solenoid be 28 centimeter square.
Answer:
Explanation:
Energy stored in a solenoid per unit volume = B₀² / (2μ₀)
B₀= μ₀ n I₀
n is no of turns per unit length .
Energy stored in a solenoid per unit volume = ( μ₀ n I₀)² / (2μ₀)
=μ₀n²I₀²/2
n = 40 turns / cm = 40 x 100 turns per meter.
I₀ = 5000A .
Putting the values
Energy stored in a solenoid per unit volume
= 4π x 10⁻⁷ x 40 x 10² x 5000² /2
= 1256 J/ m³
Volume of solenoid = cross sectional area x length
= 28 x 10⁻⁴ x .10 = 2.8 x 10⁻⁴ m³
Total energy stored = 1256 J / m³ x 2.8 x 10⁻⁴ m³
= .35 J .
True or false. There is only an induced voltage in a coil of wire if the magnetic flux through the coil of wire changes.
The diagrams show two planets of different masses with identical orbiting satellites. Select all the conditions that would increase the gravitational force between each pair.
A. move the satellites closer to the planet
B. move the satellites farther from the planet
C. Add mass to the satellites
D.Remove mass from the satellites
Answer:
C I think but I'm not sure
Explanation:
Because by adding mass it would add more gravitational pull
What do diffraction and refraction have in common? They both involve interference. They both involve wave interactions. They both involve reflection. They both involve construction.
Answer:
They both involve wave interactions.
Explanation:
Diffraction is defined as the bending of waves around obstacles. Refraction can be defined as the bending of the light when it transfers from one substance to another. The main similarity between the diffraction and refraction is that both involves the interaction of the waves with the substance and also causes the waves to bend and change their direction. Hence, they both involve wave interaction is the correct option.
What diffraction and refraction have in common is that they both involve wave interactions. This is further explained below.
What are diffraction and refraction?When waves travel from one medium to another and refract, This causes them to change direction. while Diffraction is simply defined as the bending of waves around barriers.
In conclusion, diffraction and refraction are properties of waves.
Read more about Wave
https://brainly.com/question/3004869
Which statement describes an interacting force pair represented by the third law of motion? The force exerted by a cyclist equals the combined forces of friction and air resistance. A car exerts a force on a bug as they collide and the bug exerts an equal force on the car. Gravity exerts a downward force on a refrigerator and the normal force pushes up on the refrigerator. Two people pull on opposite ends of a rope, but the rope does not move because the people pull with equal forces.
Answer:
A car exerts a force on a bug as they collide and the bug exerts an equal force on the car.
Explanation:
Newton's third law of motion states that for every action there is an equal and opposite reaction.
Action-reaction force pairs make it possible for fishes to swim, birds to fly, cars to move etc,
Furthermore, take for example, While driving down the road, a firefly strikes the windshield of a car (Action) and makes a quite obvious mess in front of the face of the driver (Reaction) i.e The firefly hit the car and the car hits the firefly.
Hence, the statement which best describes an interacting force pair represented by the third law of motion is, a car exerts a force on a bug as they collide and the bug exerts an equal force on the car.
The ultimately implies that, in every interaction, there is a pair of forces acting on the two interacting objects in this case, the car and bug. The size of the force on the car equals the size of the force on the bug. These two forces are called action and reaction forces and are the subject of Newton's third law of motion.
A 1500 kg car accelerats from 55.0 m/s to 90.0 m/s. Calculate the impulse experienced by the car
Answer:
The impulse experienced by the car is 52,500 kg.m/s.
Explanation:
Given;
mass of the car, m = 1500 kg
initial velocity of the car, u = 55 m/s
final velocity of the car, v = 90 m/s
The impulse experienced by the car is the change in linear momentum, calculated as follows;
J = ΔP = mv - mu
ΔP = m(v - u)
ΔP = 1500(90 - 55)
ΔP = 52,500 kg.m/s
Therefore, the impulse experienced by the car is 52,500 kg.m/s.
How are frequency, wavelength, and energy related? Choose all that apply.
Explanation:
The energy of a wave is given by :
[tex]E=\dfrac{hc}{\lambda}[/tex]
Where
h is Planck's constant
c is the speed of light
[tex]\lambda[/tex] is wavelength
Energy is inversely proportional to wavelength. Also, the relation between frequency and wavelength is inverse.
If the frequency is high, the wavelength will be shorter.
Hence, the correct options are :
Higher frequencies have shorter wavelengths.
Shorter wavelengths have lower energy.
Lower frequencies have lower energy.
A bus contains a 1500 kg flywheel (a disk that has a 0.600 m radius) and has a total mass of 10,000 kg.
(a) Calculate the angular velocity the flywheel must have to contain enough energy to take the bus from rest to a speed of 20.0 m/s, assuming 90.0% of the rotational kinetic energy can be transformed into translational energy.
(b) How high a hill can the bus climb with this stored energy and still have a speed of 3.00 m/s at the top of the hill? Explicitly show how you follow the steps in the Problem-Solving Strategy for Rotational Energy.
Answer:
Explanation:
moment of inertia of flywheel = 1/2 m R²
= .5 x 1500 x .6²
= 270 kg m²
If required angular velocity be ω
rotational kinetic energy = 1/2 I ω²
= .5 x 270 x ω² = 135 ω²
kinetic energy of bus when its velocity is 20 m/s
= 1/2 x 10000 x 20²
= 2000000 J
Given 90 % of rotational kinetic energy is converted into bus's kinetic energy
135 ω² x 0.9 = 2000000 J
ω²=16461
ω = 128.3 radian /s
b )
Let the height required be h .
Total energy of bus at the top of hill = mgh + 1/2 m v²
m ( gh + .5 v²)
= 10000 ( 9.8h + .5 x 3²)
From conservation of mechanical energy theorem
10000 ( 9.8h + .5 x 3²) = 2000000
9.8h + .5 x 3² = 200
9.8h = 195.5
h = 19.95 m .
A fall thrown vertically upwards with a speed
of 20 ms-¹ from the top of a tower reaches
the earth in 8seconds. find the height of the
tower.
take g= 10ms-²
Answer:
Height of tower = 480 meter
Explanation:
Given:
Initial velocity = 20 m/s
Time taken to reach ground = 8 second
So,
Final velocity = 0 m/s
Acceleration due to gravity = 10 m/s²
Find:
Height of tower
Computation:
s = ut + (1/2)(g)(t)²
s = (20)(8) + (1/2)(10)(8)²
s = 160 + (1/2)(10)(64)
s = 160 + (10)(32)
s = 160 + 320
s = 480 meter
Height of tower = 480 meter
What is the driving force behind the movement of Earth's plates?
Convection currents in the mantle are slowly causing the plates to move.
The magnetic pull of the poles are pulling the plates apart.
The inertia of the rotation of the Earth causes the plates to move.
The aliens are playing with the Earth like a puzzle.
Convection currents in the mantle are slowly causing the plates to move.
Dr. Kirwan is preparing a slide show that he will present to the executive board at tonight's committee meeting. He places a 3.50-cm slide behind a lens of 20.0 cm focal length in the slide projector. A) How far from the lens should the slide be placed in order to shine on a screen 6.00 m away? B) How wide must the screen be to accommodate the projected image?
Answer:
A) d_o = 20.7 cm
B) h_i = 1.014 m
Explanation:
A) To solve this, we will use the lens equation formula;
1/f = 1/d_o + 1/d_i
Where;
f is focal Length = 20 cm = 0.2
d_o is object distance
d_i is image distance = 6m
1/0.2 = 1/d_o + 1/6
1/d_o = 1/0.2 - 1/6
1/d_o = 4.8333
d_o = 1/4.8333
d_o = 0.207 m
d_o = 20.7 cm
B) to solve this, we will use the magnification equation;
M = h_i/h_o = d_i/d_o
Where;
h_o = 3.5 cm = 0.035 m
d_i = 6 m
d_o = 20.7 cm = 0.207 m
Thus;
h_i = (6/0.207) × 0.035
h_i = 1.014 m
A 140 g tennis ball travelling 30° east of north at 15 m/s is struck by a tennis racquet, giving it a velocity of 25 m/s, west. What are the magnitude and direction of the impulse given to the ball? Include a labelled diagram.
Answer:
The magnitude of the impulse is 1.4 Ns in the West direction.
Explanation:
The impulse equation is given by:
[tex]\Delta p=m\Delta v[/tex]
Where:
m is the mass of the ballΔv is the difference in velocitySo we will have:
[tex]\Delta p=0.140(25-15)[/tex]
[tex]\Delta p=1.4\: Ns[/tex]
Therefore, the magnitude of the impulse is 1.4 Ns in the West direction.
I hope it helps you!
Please help! I’m so confused and I’m being timed! I will give brainliest!
Answer:
Newton's Third Law of Motion states that for every action, there is an equal and opposite reaction. A rocket engine produces thrust through action and reaction. The engine produces hot exhaust gases which flow out of the back of the engine. In reaction, a thrusting force is produced in the opposite reaction.
What is a pulley and the how does it make lifting heavy loads easier?
This Is Science , please help it’s due at 3 , but I dont mind if its a little late.
Answer:
uhm you can get all these answers from go ogle but just so you dot get in trouble click the tree dots at the top right of your screen (this is if your using crome) and go to history click the square and there should be a delete thing
Explanation:
Answer:
4. I and II 9. tornado
Explanation:
A go-cart and rider have a mass of 100 kg. If the cart accelerates at 5 m/s2 during a 25 m sprint, how much work did the cart do
Answer:20watts
Explanation:
Answer:
The solution is given below
Explanation:
The computation is shown below;
We know that
Work done = Fs cosθ
But before that we need to determine the force i.e.
We know that
Force (F) = mass (m) × Acceleration (a)
= 100 × 5
= 500 N
Now, work done by the go-cart is
Work done (W) = Fs cosθ
= 500 × 25 × cos(0°)
= 500 × 25 × 1
= 12,500 J
Which of the following is evidence that a chemical reaction has occurred?
WORTH 15 POINTS WILL GIVE BRAINLIEST
What is the mechanical advantage of a handle on a water well that requires 5 newtons of force to lift a 40-Newton bucket of water?
200
8
0.125
12.5%
Option B. The mechanical advantage of a handle on a water well that requires 5 newtons of force to lift a 40-Newton bucket of water is 8.
Mechanical advantage is a measure of the force amplification completed by means of the usage of a device, mechanical tool or gadget device. The device trades off input forces towards motion to gain a preferred amplification in the output pressure.
The version for this is the regulation of the lever. The mechanical advantage is the degree how which tons of force is increased with the aid of using a device or gadget. it is equal to the pressure exerted with the aid of the tool or system divided via the carried-out effort.
calculation:-
Mechanical advantage = load/effort
= 40/5
= 8
Learn more about Mechanical advantage here:-https://brainly.com/question/18345299
#SPJ1
1. A massive object can distort the light of more distant objects behind it through the phenomenon that we call ________. 2. ________ are defined as subatomic particles that have more mass than neutrinos but do not interact with light. 3. The _____________ of spiral galaxies provide strong evidence for the existence of dark matter. 4. Models show that the _________ of the universe is better-explained when we include the effects of dark matter along with the effects of luminous matter.
Answer:
1. Gravitational lensing.
2. Weakly interacting massive particles (WIMPs).
3. Rotation curves.
4. Large-scale structure.
Explanation:
In science, matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.
Generally, matter exists in three (3) distinct or classical phases and these are; solid, liquid and gas.
Light wave can be defined as an electromagnetic wave that do not require a medium of propagation for it to travel through a vacuum of space where no particles exist.
The following statements are matched to give the characteristics of matter with respect to light;
1. A massive object can distort the light of more distant objects behind it through the phenomenon that we call: gravitational lensing. The gravitational field distorts and magnifies light from a distant galaxy such as quasars.
2. Weakly interacting massive particles (WIMPs): are defined as subatomic particles that have more mass than neutrinos but do not interact with light.
3. The rotation curves of spiral galaxies provide strong evidence for the existence of dark matter.
4. Models show that the large-scale structure of the universe is better-explained when we include the effects of dark matter along with the effects of luminous matter.
the zinc plate is coated with mercury
