PC Inc produces a 4 week supply of its PC Pal model when stock on hand drops to 500 units. It takes 1 week to produce a batch. Factory orders average 400 units per week and the standard deviation of forecast orders is estimated at 125.

If the company wished to have a cycle service level of 90%, what would be the z-value?

To determine the minimum data rate and minimum bandwidth required to transmit the multiplex signal, we need to first determine the minimum sampling rate required to sample each of the telemetry signals. The Nyquist rate is defined as half the bandwidth of the signal, so the Nyquist rate for each telemetry signal is 120 Hz. To sample at least 20% above the Nyquist rate, we need to sample at a rate of at least 120 Hz * 1.2 = 144 Hz.

Since there are 5 telemetry signals, the total number of samples per second is 5 * 144 = 720 samples/s. Since the signals are being encoded using binary PCM, each sample will require 1 bit to represent it. This means that the minimum data rate required to transmit the multiplex signal is 720 samples/s * 1 bit/sample = 720 bits/s.

To determine the minimum bandwidth required to transmit the multiplex signal, we need to consider the bandwidth required for the 5 telemetry signals as well as the additional bandwidth required for framing and synchronization. The total bandwidth required for the telemetry signals is 5 * 240 Hz = 1200 Hz. The additional bandwidth required for framing and synchronization is 1200 Hz * 0.5% = 6 Hz. The total minimum bandwidth required to transmit the multiplex signal is 1200 Hz + 6 Hz = 1206 Hz.

The maximum pace of data flow along a particular path is referred to as bandwidth in computing. Network bandwidth, data bandwidth, and digital bandwidth are three different types of bandwidth.

Contrary to this definition, bandwidth is used to refer to analog signal bandwidth measured in hertz, which is the frequency range between the lowest and highest attainable frequency while meeting a well-defined impairment level in signal power in the fields of signal processing, wireless communications, modem data transmission, digital communications, and electronics.

The actual bit rate that may be obtained is influenced by the channel noise as well as the signal bandwidth.

Learn more about bandwidth, from:

brainly.com/question/28436786

#SPJ2

The actual physical dimensions of an antenna are determined by its physical length. Examine the 4 m dipole antenna from the Antenna Tool box TM, which operates at a 75 MHz frequency.

How far a communication link extends from its maximum range is determined by its signal strength. A single-hop link's signal strength begins at 100% at zero distance and decreases as the distance increases, reaching 0% at the link's maximum range. Since the relationship is non-linear, a Bezier curve must be utilized to represent the relative distance using the keys "0 0 0 0" and "1 1 0 0" in order to ascertain the true value. Identify the separation between the vessels in relation (the result should be between 0.0 and 1.0)

[tex]{\displaystyle 1-{\frac {\text{Distance From Link Point}}{\text{Maximum Range}}}}[/tex]

Use the following substitution in the Bezier curve equation (cubic derivation)

[tex]{\displaystyle -2x^{3}+3x^{2}}{\displaystyle -2x^{3}+3x^{2}} or {\displaystyle (3-2x)x^{2}}{\displaystyle (3-2x)x^{2}}[/tex]

The signal strength of the link at the chosen distance is the outcome. The preceding is accurate for a single-hop.

To learn more about antenna refer to :

https://brainly.com/question/6849706

#SPJ4

To obtain dehydrated and purified acetic acid, it is therefore needed to remove water from this aqueous solution by a method as inexpensive as possible.

Distillation is commonly used in the industrial production of purified acetic acid from an acetic acid aqueous solution.

Acetic acid is a clear, colorless liquid with an unpleasant vinegar odor detectable at 1 ppm. It is toxic and aggressive. The normal boiling point is 117.9°C and the melting point is 16.73°C. The vapor pressure of acetic acid as a function of temperature is shown in Table 13.4.

Acetic acid is a clear, colorless liquid with an unpleasant vinegar odor detectable at 1 ppm. It is toxic and aggressive. The normal boiling point is 117.9°C and the melting point is 16.73°C. The vapor pressure of acetic acid as a function of temperature is shown in Table 13.4.

Acetic acid is commercially sold as glacial acetic acid, which contains less than 1% water.

To learn more about acetic acid refer to:

https://brainly.com/question/16539627

#SPJ4

The value of the mean absolute percent error (mape)

What is mean?

Mean is an average value calculated by adding a set of numbers and then dividing by the number of items in the set. It is a measure of central tendency in a set of data and is often used to describe the overall trend or pattern in the data. Mean can also be used to compare sets of data and is often used to compare the performance of different groups of people or businesses.

The mean absolute percent error (MAPE) is a measure of the accuracy of a forecast. It is calculated by taking the mean of the absolute percent errors (the difference between the forecast and the actual value), divided by the mean of the actual values.

For the given data, the MAPE is calculated as follows:

MAPE = (|18.00 - 17| + |20.00 - 25| + |15.00 - 14| + |14.00 - 23|)/(17 + 25 + 14 + 23) = 0.30

Therefore, the mean absolute percent error (MAPE) for the given data is 0.30.

To learn more about mean
https://brainly.com/question/1136789
#SPJ1

A reciprocating internal combustion engine's thermodynamic process is known as the Diesel cycle. The illustration is given in the attachment.

An alteration to a system's thermodynamic state is referred to as a thermodynamic process. A system changes when it moves from its initial thermodynamic equilibrium state to its final equilibrium state.

The actual course of the process is rarely considered in classical thermodynamics and is not given much attention. Unchanged states of thermodynamic equilibrium persist unless they are broken by a thermodynamic operation that starts a thermodynamic process.

Each of the equilibrium states is fully specified by a set of thermodynamic state variables that are appropriate for the situation and that depend only on the system's current condition, not on the course taken by the processes that led to it.

Learn more about thermodynamic process

https://brainly.com/question/3952974

#SPJ4

Answer: The specific heat of the metal can be calculated using the formula Q = mcΔT, where Q is the heat absorbed by the metal, m is the mass of the metal, c is the specific heat of the metal, and ΔT is the change in temperature. Since we know the heat absorbed by the metal (10,000 joules) and the mass of the metal (200 grams), we can solve for the specific heat by rearranging the equation to solve for c:

Q = mcΔT

c = Q / mΔT

c = (10,000 joules) / (200 grams * 80 degrees Celsius)

c = 0.625 joules/gram-degree Celsius

Therefore, the specific heat of the metal is 0.625 joules/gram-degree Celsius, which corresponds to answer choice (c).

When the battery was changed, the sentinel 14 gun fire safe's electronic lock, steel, long guns, and rifles began to tick.

Electric(al) devices are tools that functionally rely on electricity to power their fundamental parts. They can be considered as being superior to traditional mechanical systems, which depend on diverse power sources like fuels or human physical strength. A certain type of electrical equipment called an electronic device is used more often to process data than to generate mechanical forces. To more clearly distinguish between the two types, electric gadgets that emphasize physical work are also known as electromechanical devices. Mechatronics demonstrates how the two sciences overlap.The study of electronic and electric devices, as well as their design, maintenance, and power supply, is known as electrical engineering.

Learn more about electrical from

brainly.com/question/776932

#SPJ4

A soft story building is a multi-story building in which one or more floors have windows, wide doors, large unobstructed commercial spaces.

what is meant by multi-story building?

To learn more about multi-story building refer to

https://brainly.com/question/24792206

#SPJ4

The planner would note that the deliverable is a specification document suitable for distribution to vendors if the task is to write firewall specifications for the preparation of a(n) Request for proposal.

To learn more about request for proposal refer to :

https://brainly.com/question/12996542

#SPJ4

Correct order is - Identify the problem, Establish a plan of action, Test the network connection and more.

To Know More About troubleshoot, Check Out

https://brainly.com/question/29736842

#SPJ4

It is to be noted that the expression that follows the practice of using parentheses to make the intended order of evaluation explicit is; (x > y) && (!a == b) (Option A)

In programming, an expression is a piece of code that represents a value or produces a value. Expressions can be used to perform calculations, assign values to variables, or control the flow of a program.

Expressions can be simple, such as a single number or a string of text, or they can be more complex, involving multiple values, operators, and functions. Expressions can also involve variables, which are used to store values in a program. Expressions can be used in various ways in a program, such as to control the flow of the program using conditional statements, or to perform operations on data.

Learn more about expressions;
https://brainly.com/question/14368396
#SPJ1

In the georelational model, the data scale of the values used to associate features with records in a relational database is "character" (Option E)

In the georelational model, the data scale of the values used to associate features with records in a relational database is character. The georelational model is a way of storing geographic data in a relational database, in which features (such as points, lines, and polygons) are associated with records in the database through character values. These character values may be alphanumeric codes or names that represent the features.

A georelational data model is a geographic data model that depicts geographic characteristics as a combination of spatial and attribute data that is interconnected. The basic data model utilized in coverages is the georelational model.

It varies from the georelational data model in two key ways. In a single system, the object-based data model holds both spatial and attribute data for spatial characteristics. The object-based data model associates a spatial characteristic (object) with a set of attributes and operations.

Learn more about the relational database:
https://brainly.com/question/13262352
#SPJ1

Using  Bernoulli equation we can say that the pressure required at the nozzle inlet, meaning P1, to yield an exit speed of 50 m/s is 1.48 kPa.

equations that control:

[tex]\frac{p_{1}}{\rho}+\frac{V_{1}^{2}}{2}+g z_{1}=\frac{p_{2}}{\rho}+\frac{V_{2}^{2}}{2}+g z_{2}[/tex]

Continuity for incompressible and uniform flow:

[tex]\sum_{\mathrm{CS}} \vec{V} \cdot \vec{A}=0[/tex]

We know that  

1)   Steady flow.

(2) Incompressible flow.

(3) Frictionless flow.

(4) Flow along a streamline.

(5)[tex]z_{1}=z_{2}[/tex]

(6) Uniform flow at sections (1) and (2).

The maximum speed of 50 m/s is well below 100 m/s, which corresponds to Mach number M≈0.3 in standard air. Hence, the flow may be treated as incompressible.

Apply the Bernoulli equation along a streamline between points (1) and (2) to evaluate [tex]p_{1}[/tex]

p1 − patm = p1 − p2 = ρ/2  (V2^2 −V1^2)

-ρV₁A₁ + ρV₂A₂ = 0 or V₁A₁ =  V₂A₂

V₁ = V₂A₂/A₁ = 50 x 0.02/0.10 = 10 m/s

Since air at standard condition , ρ = 1.23 kg/m³

p1 − patm = ρ/2. (V₂²^2−V₁^²)

= 1/2 × 1.23 x (50² −10²)

= 1.48kPa

To know more about Bernoulli equation refer:

https://brainly.com/question/9506577

#SPJ4

The upward force of the rope and the downward force of the weight of nails must be exactly equal as it meets the bag. If there were a net force present there instead of zero, the point would be moving either upward or downward. Therefore, the rope's upward force at that location is 136 N.

The bag is not accelerating up or down if it is still. You can infer from that fact alone that there is no net vertical force acting on it. The total of all upward forces acting on it is therefore exactly equal to the gravitational force acting downward, or the "weight" of the bag. If the bag is strung from a single rope, the rope's tension must match the bag's 136-N weight. And if it is supported by four ropes, the total tension of those four ropes is 136N. I am unable to comment on the rope's increased level of tension. If the rope itself has any mass, then points further up must hold both the weight of the rope segment below the point as well as the weight of the bag of nails .If the rope has no mass, then its entire length is under 136 N of strain.

Learn more about bag from

brainly.com/question/16786026

#SPJ4

# Provide a static input for the word and store it in a variable. putword = givenword ("Enter your name:") # Create a variable named "sampstrng" and store an empty string in it. SampleString = " # Use a for loop to iterate through the given word(string). if givenword has this wordchar: # Use string concatenation to join the iterator character to the sampstrng. wordchar = sampstrng + sampstrng.Print out the sample string. print.

Anything that repeatedly performs the same actions is said to be in a loop or to be operating on a loop: The cassette was in a continuous loop, playing the same tunes over and over. In computer programming, a loop is a collection of instructions that are repeatedly carried out up until a particular condition is satisfied. Usually, a specific action, like receiving and changing some data, is followed by a conditional check, like seeing if a counter has reached a given value. Use a "For" loop to iterate over a specific section of code a predefined number of times. To check for a student's grade in the class, for instance.

Learn  more about loops from

brainly.com/question/14390367

#SPJ4

In order to prevent neighboring lipids from packing tightly, the double bonds cause bends in the fatty acid tails.

If falling temperatures compress saturated fatty acids, they press against one another to create a dense, comparatively inflexible membrane. When unsaturated fatty acids are compressed, the "kinks" in their tails push nearby phospholipid molecules apart, maintaining the membrane's fluidity.

Unsaturated fatty acids have at least one double bond in their hydrocarbon chain and a carboxyl group with a lengthy hydrocarbon backbone. In order to keep the membrane from freezing at too low a temperature, the cell frequently uses unsaturated fatty acids.

To know more about fatty acids visit :-

https://brainly.com/question/13528495

#SPJ4

Tomb of ahmed is an example of architecture with similar features to the persian fire temple pavilion featured in lecture was this early islamic tomb.

Some information about Ahmad's Tomb:

Ahmad Shah's tomb, also known as Raja no Hajiro and Badshah no Hajiro (King's Mausoleum), is a collection of tombs built during the Medieval period in Ahmedabad. He is widely regarded as the founder of Ahmedabad, Gujarat. The exquisite artwork and architectural extravagance set the tomb apart from other tourist attractions and establishes it as a gold standard in Indian architecture.

Expectations when visiting Ahmad Shah's Tomb:

1. Ahmad Shah's tomb is one of Ahmedabad's most important tourist attractions.

2. The tomb is square in shape and has stone windows with lattice work. Women, on the other hand, are still not permitted in the central chamber of Ahmad Shah's Tomb.

3. Across the street is the Rani no Hajira, which houses the tombs of Ahmad Shah's queens. The tomb is in excellent condition, but the tombs of the queens have deteriorated.

4. Ahmad Shah's tomb is one of Ahmedabad's architectural wonders.

5. The artistic craftsmanship, latticed windows, and domes and minarets give the Tombs of Ahmad Shah an exquisite appearance. This tomb in Ahmedabad is a must-see for anyone interested in Mughal art and culture.

To know more about lattice work, visit: https://brainly.com/question/20038994

#SPJ4

c read an integer as the number of goose objects. The desired output is Goose with age 9.0 and weight 3.5 is deallocated.

#include <iostream›

#include ‹iomanip>

using namespace std;

class Goose

{

public:

Goose();

void Read();

void Print);

~Goose ();

private:

double age;

double weight:

goose.cpp - A20J LADDER - Visual Studio Code

C' csharp.cs

C merge sort.e

C goose.cpp X

C* zeros ones.cpp

DE

O

0:

Ge dima and friends.cpp

a

×

D

O

o)

{

8

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

7:

Goose: : Goose()

{

age = 0.0;

weight = 0.0;

}

{

void Goose:: Read)

cout << "Enter Goose's age:

<< endl;

cin ›› age;

cout «< "Enter Goose's weight:

" «< endl;

cin ›› weight;

void Goose: :Print()

32

}

{

33

34

35

}

36

37

Goose: :~Goose ()

38

{

39

40

}

41

42

int main()

43

44

45

46

47

48

49

Goose *myGeese = nullptr;

int count;

int i;

cin ›› count;

myGeese = new Goose[count];

for (int i = 1; i <= count; i++)

50

51

myGeese-›Read();

myGeese-›PrintO):

52

53

54

55

56

delete[] myGeese;

return e;

57

cout << "Goose's age:

" << fixed << setprecision(1) «< age << endl;

cout << "Goose's weight:

" «< fixed << setprecision(1)

<< weight << endl;

cout «< "Goose with age " << age «< " and weight " «< weight «<" is deallocated " «< endl;

1

Enter Goose's age:

9.0

Enter Goose's weight:

3.5

Goose's age: 9.0

Goose's weight: 3.5

Goose with age 9.0 and weight 3.5 is deallocated

PS C: \A20J LADDER>

To learn more about desired output

https://brainly.com/question/20597032

#SPJ4

The answer for the second loop is, Total reads or loads = 16 * 16 * 2 = 512

So, Blank_4  = 512

Reads or loads that miss in the cache are 256  because accessing x-coordinates is always missed and accessing y-coordinate is always hit

Blank_5 = 256

Resulting in a cache miss rate is 256/512 = 0.5

Blank_6 = 50%

If the cache is twice as big, it would be 128/512 =0.25

Blank_7 = 25% because a cache was as large for storing the entire grid.

What is cache ?

A cache, which is pronounced "cash," is a piece of hardware or software that is used to temporarily store something in a computing environment, typically data. To enhance the performance of recently or often accessed data, a small quantity of quicker, more expensive memory is employed.

Hence to conclude cache miss rate is 0.5

To know more on cache follow this link:

https://brainly.com/question/25704927

#SPJ4

A 30 m length, 2 MHz-operating lossless transmission line with characteristic impedance Z0 = 50 ohm. A load terminates a transmission line with a 50 impedance.

What is transmission line?

For a transmission line, the typical impedance is always 75 or 50 ohm. Since the transmission line is a distributed parameter component, the two portions vary continually. The term "50 ohm transmission line" designates a line with a characteristic impedance of 50 ohms. The impedance that corresponds to the minimal loss, maximum power, and maximum voltage is 50 Ohms, which is the least undesirable . Signal reflection is avoided whenever a transmission line with a finite length is terminated by a load impedance that is equal to the characteristic impedance.

To learn more about impedance from given link

brainly.com/question/2263607

#SPJ4

Answer:

HVAC and wiring installation

Completed common areas

Explanation:

Core and shell development includes the installation of HVAC and wiring, as well as the completion of common areas. It does not typically include the installation of audio/video equipment or tenant-specific facilities, which are typically part of the tenant improvement process.

The movement of persons or cargo across waterways is referred to as marine transportation. The company that offers water transportation is called Marine Transport Management, Inc.

International trade and the world economy are based on maritime transportation. The number is significantly higher for the majority of poor nations, where shipping accounts for over 80% of all international trade in products. Since 1968, UNCTAD has released the Review on Maritime Transport, which is its flagship report.

The primary goal of this program is to equip you with the knowledge and abilities needed to land prestigious jobs in the offshore and maritime sectors. You will develop the self-assurance necessary for a senior position in the maritime industry in the interpersonal and cross-cultural competencies.

To know more about waterways visit :-

https://brainly.com/question/2453542

#SPJ4

The given code is run after stored in a tuple is (100, 0).

To learn more about code language refer to:

https://brainly.com/question/16936315

#SPJ4

Consider a second-order, causal, LTI system with the transfer function H. (s). The second-order nature of the system dictates that the denominator polynomial of H(s) is of degree 2. Give a comparable system transfer function and the pole and zero locations for each of the parts below. The zero-input response of the BIBO stable system is a decaying sinusoid.

The exact same number of elements from Y are assigned to each element of X via a mathematical function from a set X to a set Y. Two Persian mathematicians named Al-Biruni and Sharaf al-Din al-Tusi are credited with providing the first known treatment of the idea of function. Functions were first used to describe the idealized relationship between two varying quantities. For instance, time affects a planet's position. Historical development of the concept coincided with the invention of infinitesimal calculus at the end of the 17th century, and the functions taken into account were differentiable until the 19th century.

Learn more about functions from

brainly.com/question/11624077

#SPJ4

a) vB = {mB / (mA+mB)} v°

b) h = mA×v°²/mA+mB ×2g

a) It implies from the impulse-momentum principle that the horizontal part of momentum is conserved in the absence of external horizontal forces. The velocity of B at its highest height can be used to solve this relation.

b) The initial kinetic energy and maximal potential energy may be related using the conservation of energy concept. This connection yields the greatest vertical distance.

Any moving body can have momentum since momentum is defined as mass in motion. The impulse of an item is equal to its change in momentum. Impulse is defined as a force multiplied by a time period. Instead of being the same as momentum, impulse is the change in momentum of an object.

To know more about Impulse- momentum visit

brainly.com/question/904448

#SPJ4

A cart A with mass ma that can freely roll on a frictionless horizontal tract is coupled to a ball B with mass mb that is strung from a rope of length l. h = mAv°2/mA+mB 2g, where vB = mB / (mA+mB) v°

a) The impulse-momentum principle suggests that, in the absence of external horizontal forces, the horizontal component of momentum is conserved. This relationship can be solved using the velocity of B at its maximum height.

b) The conservation of energy principle can be used to relate the initial kinetic energy and maximum potential energy. The longest vertical distance is produced by this connection.

Since momentum is characterized as mass in motion, it can exist in any moving body. An object's change in momentum is equal to its impulse. The definition of an impulse is a force times a time interval. Impulse is the change in momentum of an object as opposed to momentum itself.

To know more about Impulse-momentum visit:

brainly.com/question/904448

#SPJ4

Change the character at userString's index strindex to updatedChar given the strings userString on one line, updatedChar on another, and integer strindex on a third. Example: If the input is a gecko and y, the result will be a gecko.  true

A UserString container, which is akin to a String in the Python collections module. These string items are kept in this class as containers. This class is useful when one wants to create their own string with unique or extra features. Strings are collections of characteristics ordered in a particular order. This suggests that the characters that make up the string are believed to be in a specified left-to-right order. The four collection data types that are available in the Python programming language are list, tuple, sets, and dictionary. The function's name is flexible in Python. The current function can be renamed to just be a function aliasing.

Learn more about strings from

brainly.com/question/20813205

#SPJ4

For a bjt, the emitter injection efficiency is 0.996, the base transport factor  ratio  is 0.992, β =1 and α =0.5

The ratio of a transistor's collector and emitter currents, or alpha factor (), is always less than one (between 0.5 and 1). The ratio of its collector and base currents, known as the beta () or current gain ( = Ic/Ib), is always greater than 1. The factor is alternatively calculated using the formula = /(+1)

β = 0.996/ 0.992=1

α = β/(β+1) .=1/1+1=1/2=0.5

When two ratios are equivalent, a proportion is present as well.

In mathematics, a ratio shows how frequently one number appears in another. For instance, the proportion of oranges to lemons in a dish of fruit would be eight to six.

Learn more about ratio from

brainly.com/question/12024093

#SPJ4

Hot working refers to the metal forming process when it is carried out above the recrystallization temperature. Typically, it is between 0.6Tm times the melting point of base metal.

When newly treated, polished, or broken, a material takes on a bright look and conducts electricity and heat reasonably well. Metals are typically ductile and malleable. These traits are the result of the metallic bond that connects the atoms or molecules of the metal. A metal can be a molecular compound like polymeric sulphur nitride, an alloy like stainless steel, a chemical element like iron, or any combination of these. In physics, any substance that can conduct electricity at absolute zero degrees is commonly referred to be a metal. Numerous compounds that are not normally thought of as metals can become metallic when subjected to extremely high pressures. For instance, the nonmetal iodine progressively changes into a metal when subjected to pressures between 40 and 170 thousand.

Learn more about metal from

brainly.com/question/4701542

#SPJ4

The quantitative research approach is part of the positivist way of thinking includes Measurability, objectivity, reducing uncertainty, duplication, and the use of standardized procedures.

The process of gathering and interpreting numerical data is known as quantitative research. It can be used to identify trends and averages, formulate hypotheses, examine causality, and extrapolate findings to larger populations.

Comparative research, which involves gathering and examining non-numerical data, is known as quantitative research.

The natural and social sciences, including biology, chemistry, psychology, economics, sociology, and marketing, frequently use quantitative research.

Statistics can be used to formally test hypotheses or predictions in both correlational and experimental research. Depending on the sampling technique employed, the results might be extrapolated to larger populations. Use operational definitions to convert abstract notions (like mood) into observable and quantifiable metrics while collecting quantitative data (e.g., self-ratings of feelings and energy levels).

To know more about quantitative research refer:

https://brainly.com/question/22036535

#SPJ4

The length of the uniform steel bar is; 1.077 m

A physical pendulum is defined as an extended object that, for small angular displacements, it can be modeled to move in simple harmonic motion about a pivot that does not go through the center of mass. The period of this motion is given by the formula;

T = 2π√(I/mgd)

where;

I is the moment of inertia of the object about an axis through the pivot.

d is the distance from the pivot to the center of mass of the object.

The period of the pendulum is given as t = 1.7 seconds

The moment of inertia of the same bar rotating about an axis through one end is gotten from the formula;

I = ¹/₃ML²

Where L is the length of the bar

Since the bar is uniform, the middle of mass is found in the middle and as such; d = L/2

Thus;

T = 2π√(2I/mgL)

Put  ¹/₃ML² for I into the period formula and we have;

L = 3gT²/8π²

Thus;

L = 3(9.81 * 1.7²)/8π²

L = 1.077 m

Read more about Uniform bar length at; https://brainly.com/question/15240874

#SPJ1