Extensive properties, such as mass and volume, depend on the amount of matter that is being measured. ... Both extensive and intensive properties are physical properties, which means they can be measured without changing the substance's chemical identity
5. Determine if each statement is true or false about forming a hypothesis:
a. It must be long.
b. It is an educated guess.
c. It is in if…then format.
d. It must be testable.
e. It must start with I think.
a container with a volume of 2.5L contains air at a pressure of 0.5 atm. if the volume is reduced to 1.5L at constant temperature, what will be the resulting pressure of the air inside
Answer:
Final pressure of the air inside is 0.83atm
Explanation:
Boyle's law is the gas law that relates the change in volume when pressure change at constant temperature and vice versa. The equation is:
P₁V₁ = P₂V₂
Where P is pressure and V is volume of 1, initial state and 2, final state of the gas
Replacing:
P₁ = 0.5atm
V₁ = 2.5L
P₂ = ?
V₂ = 1.5L
P₁V₁ = P₂V₂
0.5atm*2.5L = P₂*1.5L
0.83atm = P₂
Final pressure of the air inside is 0.83atm
An atom is found in group 17 and contains 10 neutrons. How many valence
electrons does it have? *
I think this is gonna be 2050 for memers
Answer:
HOLY WOAH
Explanation:
YES
If you used .010 moles of baking soda, what mass of carbon dioxide should be produced?
Answer:
d
Explanation:
The beakers in the picture above are labeled according to the ionic solutions they contain. What metal or metals could replace copper in the copper(II) nitrate solution?
Explanation:
When a metal replaces another metal in solution, we say such a reaction has undergone a single displacement reaction.
In such a reaction, metal higher up in the activity series replaces another one due to their position.
To known the metal or metals that will replace the given copper, we need to reference the activity series of metals.
Every metal higher than copper in the series will displace copper from the solution.
So, there metals are: potassium, sodium, lithium, barium, strontium etc.
describe how oxides of nitrogen are produced when petrol is burned in car engines !!HELP!!
Answer:
Answer is on the pic
Explanation:
I hope it's helpful!
Explain how the temperature of a substance is related to the kinetic of it molecules.
Answer: this is the explanation
Explanation:
the temperature of a substance is related to the average kinetic energy of the particles of that substance. When a substance is heated, some of the absorbed energy is stored within the particles, while some of the energy increases the motion of the particles
The decomposition of 65.9 g ammonium nitrate yields how many liters of dinitrogen monoxide at 2.65 atm and 303 k?
(N= 14.01 g/mol, H= 1.008 g/mol, O=16.00 g/mol)
NH4NO3(s) -> N2O(g)+2H2O(g)
Hint: R = 0.0821 L atm/(mol K)
It’s 7.72 it took a while but I found the answer
A small bubble rises from the bottom of a lake, where the temperature and pressure are 8°C and 6.4 atm, to the water's surface, where the temperature is 25°C and pressure is 1.0 atm. Calculate the final volume (in ml) of the bubble if its initial volume was 2.1 ml.
a. 0.070 ml
b. 21 ml
c. 14 ml
d. 42 ml
Answer:
b
Explanation:
How many grams are in 8.5 moles of lithium oxide?
In order to prove that the Law of Conservation Mass is obeyed, what are the coefficients
needed to balance the following reaction:
C3Hg +
02
1
CO2 +
H2O
Answer: [tex]C_3H_8+5O_2\rightarrow 3CO_2+4H_2O[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The balanced chemical equation for combustion of propane will be :
[tex]C_3H_8+5O_2\rightarrow 3CO_2+4H_2O[/tex]
From the following elements: lithium, beryllium, and fluorine, predict which
one will have the largest second ionisation energy. Explain your answer.
Answer:
The element that has the largest second ionization energy is;
Lithium, Li
Explanation:
The given elements and their positions on the periodic table are;
1) Lithium is located in group 1, period 2 position on the periodic table
2) Beryllium is located in group 2, period 2 position on the periodic table
3) Fluorine is located in group 17, and period 2 position on the periodic table
The first ionization energy of the atoms in the periodic table increases across the periods from left to right and also increases from bottom to the top within a group
However for the second ionization energy, which is the energy required to remove an electron from an atom that has one less electron, we have;
The electron configuration of the given of ions that take part in the reaction for the removal of the second ionization energy are;
Li⁺ = [He} 2s⁺
Therefore, the second ionization energy is the removal of an electron from the stable duplet of the helium atom (the core of the lithium atom) which require about 7297 kJ/mol
For beryllium, we have;
Be⁺ = [He]2S¹⁺
Therefore, the second ionization requires the removal of the remaining one electron in the valence shell, which will then lead to the remaining structure of the stable helium core and therefore, the second ionization energy of beryllium is about 1757 kJ/mol, which is low compared to helium
For fluorine, we have;
F⁺ = [He] 2s² 2p⁴⁺
Therefore, the second ionization of fluorine remains high due to the increased attraction of the positively charged fluorine ion for electrons than electrically neutral fluorine atom that has equal number of protons and electrons such that the second ionization energy of fluorine is higher than the first ionization energy and is about 3357 kJ/mol
Therefore, the element that has the largest second ionization energy is lithium, Li.
Name the following parts:
A—-
B——
C——
List and describe all five types of chemical reactions. thx.
Answer:
combination, decomposition, single-replacement, double-replacement, and combustion.
Explanation:
(b) 28.2 yd to centimeters
Answer:
2578.608 centimeters in 28.2 yards.
Explanation:
There are 91.44 centimeters to a yard. Multiplying 91.44 by the number of yards, we get the number of centimeters per yards.
91.44(28.2) = 2578.608
Answer:
hruejhehee7 suhdbdudud d d
Explanation:
jejeij3j3n3jeij
Brainliest for an answer!
2 As (s) + 6 NaOH (aq) → 2 Na3AsO3 (s) + 3 H2 (g)
If 34.0g of As react with excess NaOH at STP, what volume of H2 will be produced in liters?
If you can answer this question quickly, I will mark you brainliest, I'm stumped to be honest.
The volume of H₂ : = 15.2208 L
Further explanationGiven
Reaction
2 As (s) + 6 NaOH (aq) → 2 Na₃AsO₃ (s) + 3 H₂ (g)
34.0g of As
Required
The volume of H₂ at STP
Solution
mol As (Ar = 75 g/mol) :
= mass : Ar
= 34 g : 75 g/mol
= 0.453 mol
From the equation, mol ratio As : H₂ = 2 : 3, so mol H₂ :
=3/2 x mol As
=3/2 x 0.453
= 0.6795
At STP, 1 mol = 22.4 L, so :
= 0.6795 x 22.4 L
= 15.2208 L
Which statement best explains the net transfer of energy that is about to
happen in this photo?
A. The racket and the ball will both gain kinetic energy.
B. The ball will gain kinetic energy, and the racket will lose kinetic
energy
C. The racket will gain potential energy, and the ball will lose kinetic
energy
D. The racket and the ball will both lose potential energy
Answer:
Explanation:
B I got it right
Answer:
B. The ball will gain kinetic energy, and the racket will lose kinetic
energy
Explanation:
A mass of a gas occupies 840cm cube at 750mm pressure, what volume would it occupy at 780mm pressure
The final volume : 807.69 cm³
Further explanationGiven
Initial volume : 840 cm³
Initial pressure : 750 mmHg
Final pressure : 780 mmHg
Required
The final volume
Solution
Boyle's Law
At a fixed temperature, the gas volume is inversely proportional to the pressure applied
[tex]\tt p_1V_1=p_2.V_2\\\\\dfrac{p_1}{p_2}=\dfrac{V_2}{V_1}[/tex]
Input the value :
V₂=(P₁V₁)/P₂
V₂=(750 x 840)/780
V₂=807.69 cm³
S-L Line
760
L-G Line
LIQUID
PRESSURE OF THE SUBSTANCE mm Hg
380
SOLID
58
GAS
-S-G Line
O'c
100°C
TEMPERATURE OF THE SUBSTANCE
S-L Line: Line showing conditions in which solid
and liquid phases are in equilibrium.
L-GLine: Line showing conditions in which liquid
and gas phases are in equilibrium
S-G Line: Line showing conditions in which solid
and gas phases are in equilibrium
What is the approximate vapor pressure when the gas condenses at 80'C?
200
05
760
430
Define the terms heredity and inherited in your own words.
Answer:
Heredity is when you have gotten either physical or mental traits from your parents.
Inherited in Biology: Getting traits from your parents
Inherited outside Biology: is the practice of passing on private property, titles, debts, privileges, rights, and obligations upon the death of an individual.
Explanation:
50 POINTS TO WHO ANSWERS THIS!!!
Select from the drop-down menu to correctly complete the sentence.
In order for a chemical reaction to take place, a certain amount of must be present.
A) Catalyst
B) Concentration
C) Surface Area
D) Temperature
Answer:
Temperature
Explanation:
A compound was analyzed and found to contain the following percent composition: 2.056% hydrogen, 32.69% S, and 65.26% oxygen. Calculate the empirical formula.
Answer:
H2SO4
Explanation:
Firstly,
2.056% hydrogen = 2.056g of H
32.69% Sulphur = 32.69g of S
65.26% oxygen = 65.26g of O
Next, we convert each mass into moles by dividing by their respective molar mass:
H = 1, S = 32, O = 16
H = 2.056/1 = 2.056mol
S = 32.69/32 = 1.021mol
O = 65.26/16 = 4.078mol
Next, we divide each mole value by the smallest mole value (1.021)
H = 2.056/1.021 = 2.01
S = 1.021/1.021 = 1
O = 4.078/1.021 = 3.99
Approximately the ratio of H to S to O is 2:1:4, hence, the empirical formula for H, S and O is H2SO4.
The empirical formula of a chemical compound is the simplest whole-number ratio of atoms present in a compound
The correct answer of the following is [tex]H_2SO_4[/tex]
The data is given as follows:-
2.056% hydrogen = 2.056g of H 32.69% Sulphur = 32.69g of S65.26% oxygen = 65.26g of O
We have to find the moles in the reaction.
The mas of the element is as follows:-
H = 1S = 32O = 16
After solving the equation we get
[tex]H = \frac{2.056}{1} = 2.056mol\\\\S = \frac{32.69}{32} = 1.021mol\\\\O = \frac{65.26}{16} = 4.078mol[/tex]
Next, we divide each mole value by the smallest mole value (1.021)
[tex]H = \frac{2.056}{1.021} = 2.01\\\\S = \frac{1.021}{1.021} = 1\\\\O = \frac{4.078}{1.021} = 3.99[/tex]
The ratio of H to S to O is 2:1:4,
Hence, the empirical formula for H, S, and O is [tex]H_2SO_4.[/tex]
For more information, refer to the link:-
https://brainly.com/question/15804584
Which of these is an example of water in liquid form
Answer:
???????????????????????
Answer:
river or lake
Explanation:
2. Based on what you know about waves and light, do you think that light can be
modeled as a wave? Explain why or why not.
Answer:
Light as a wave: Light can be described (modeled) as an electromagnetic wave. In this model, a changing electric field creates a changing magnetic field. This changing magnetic field then creates a changing electric field and BOOM - you have light. ... So, Maxwell's equations do say that light is a wave.
Explanation:
Hope this helps
Answer:
Light as a wave: Light can be described (modeled) as an electromagnetic wave. In this model, a changing electric field creates a changing magnetic field. This changing magnetic field then creates a changing electric field and BOOM - you have light. ... So, Maxwell's equations do say that light is a wave.
Explanation:
Credit for 2021FOLLOWme
Can someone help me on this please
Answer:
the answer for 5 is liquid
A process in which substances chemically rearrange to form new substances
Molecule
Energy
Organism
Chemical reaction
Matter
Cellular respiration
Answer:
Chemical reaction
Explanation:
After new substances are formed they can't be reversed to their original state.
which diagram would it be?
Answer:
2CH4 ------> 3H2 + C2H2
Explanation:
The law of conservation of mass states that atoms can neither be created nor destroyed in a chemical reaction.
The implication of this law is that the number of atoms of each element on the reactant side must be equal to the number of atoms of each element on the product side.
This law is only obeyed by the reaction, 2CH4 ------> 3H2 + C2H2
There were eight atoms of H on the left hand side as well as the right and side of the reaction equation. There were two atoms of C on both the left and right hand sides of the reaction equation respectively. Hence, the law was obeyed here.
What science should i take in highschool? (Biology,Chemistry,Physics)
Answer:
Biology
Explanation:
I'm currently taking highschool biology right now and it's a lot of fun. If you like animals and cells, a lot of fun.
A certain chemical contains 46.30% chlorine, 47.05% carbon, 6.63% hydrogen. What is the molecular formula of the compound? The molar mass of the compound was determined to be 153.052g/mol.
C6H10CI2
C6H8CI2
C3H5CI
C4H4CI
C8H8CI2
Answer:
C6H10Cl2
Explanation:
Convert mass % to mass
100g of the compound contains from each elements: 46,3g Cl; 47,05g C and 6,63g H
Molar mass
Cl = 35.5 g/mol
C = 12 g/mol
H = 1 g/mol
Find the number of moles:
Chlorine: 46.4g /35.5g/mol = 1,3 moles
Carbon: 47,05g/12 g/mol = 3,92 moles
hydrogen: 6,63g/1g/mol = 6,63 moles
Molar fraction:
Cl = 1,30/ 1,30 = 1
C = 3,92/ 1,30 = 3,01
H = 6,63/ 1.30 = 5,01
C3H5Cl = 76,5 g/ mol x 2 = 153 g/ mol
So multiply the molecular formula by two = C6H10Cl2
