physics class 9 chapter 8 please tell​ please

Answer:

10 litres.

Explanation:

The air fuel ratio for aircraft is 12:1. It is due to simplicity piper archer is equipped with continuous flow injection system. There is a fuel sensing is Piper Archer which informs the pilot about the low fuel when the fuel level reaches to as low as 10 litres only in the tank. The yellow low furl light will illuminate to alert the pilot.

Answer:

the component of light reflected by that object

Explanation:

Answer:

what do u want to ask ????

Answer:

Increased

Explanation:

kVp is an acronym for kilovoltage peak, and it determines the strength x-ray beam strength, and the quality of the beam, it is a measure of the highest that the x-ray machine produces. A 60 kVp x-ray will produce photons with a maximum energy of 60 kilovolts while a 70 kVp will produce photons having 70 kilovolts as the maximum energy

Therefore, a high kVp exposure will result in scattered photon that is of increased energy compared with a lower kVp exposure.

Answer:

C voltage

Explanation:

Voltage is the change in electric potential so basically current flows from high potential to low potential due to voltage.

Answer:

b. 12.5 mAs, 70 kVp

Explanation:

The given parameter are;

The initial exposure factors := 10 mAs and 70 kVp

The initial Grid Ratio, G.R.₁ = 8:1

The Grid Ratio with which the radiographer desires to increase the scatter absorption, G.R.₂  = 12:1

Given that the lead content in the 12:1 grid, is higher than the lead content in 8:1 grid and that 12:1 grid needs more mAs to compensate, and provides a higher image contrast, the amount of extra mAs is given by the Grid Conversion Factors, GCF, as follows;

The GCF for G.R. 8:1 = 4

The GCF for G.R. 12:1 = 5

Therefore, given that the mAs used by the radiographer for 8:1 Grid Ratio is 10 mAs, the mAs required for a G.R. of 12:1 in order to maintain the same exposure is given as follows;

mAs for G.R. of 12:1 = 10 mAs × 5/4 = 12.5 mAs

Therefore the new exposure factors are;

12.5 mAs, 70 kVp

The amount of solar radiation received by Earth from the sun, known as insolation, is greatest when the sun is directly overhead a location.

The amount of solar radiation received by Earth from the sun is known as insolation, solar insolation is greatest when the sun is directly overhead a location.

The energy transferred from the Sun in the form of electromagnetic radiation is known as the solar energy

It can be used as thermal energy for various life purposes as well as for electricity conversion with the help of solar photovoltaic cells

The ratio of total electrical energy generated by a solar photovoltaic panel to its total thermal energy is known as solar energy efficiency. The solar panel's area and design have an impact on how energy-efficient it is.

Thus, the term "insolation" refers to the amount of solar radiation that Earth receives from the sun. Solar insolation is highest when the sun is directly overhead a location.

Learn more about solar energy from here, refer to the link;

brainly.com/question/9704099

#SPJ2

Answer:

answer is E

Explanation:

[tex]\bold{{Answer}}[/tex]

O physical, chemical, respectively

please buddy correct me if im wrong

The ability of a metal to react with air and water is a  chemical, chemical, respectively property

A chemical change occur when the substance's composition is changed or when bonds are broken and new ones are forms a chemical change occur .

When a metal burn in air or react with air it form metal oxide and when metal react with water it forms oxides or hydroxides and release hydrogen gas . In both the cases change in composition is taking place . hence , bot are chemical reactions

correct answer is O chemical, chemical, respectively

learn more about chemical change

https://brainly.com/question/23693316?referrer=searchResults

#SPJ3

Answer: Re-Horakhty

Explanation:

He has a human body and a falcon head, he has a crown in form of a disk with a cobra on his head. Ra-Horakhty was thought of as the god of the rising sun.

Answer:

The specific heat of air is 100  J/kg°C.

Explanation:

mass, m = 5 kg

Temperature change, T' - T =  37 °C - 22 °C = 15°C

heat, H = 7500 J

let the specific heat of air is c.  

The formula of heat is

H = m c (T' - T)

7500 = 5 x c x 15

c = 100 J/kg°C

Answer:

150 kJ

Explanation:

Applying,

ΔH = Energy level of Product(E') - Energy level of reactant(E)

Where ΔH = enthalpy change, E' and E = energy level of the product and the reactant respectively

ΔH = E'-E............. Equation 1

From the diagram,

Given: E' = 200 kJ, E = 50 kJ

Substitute these values into equation 1

ΔH = 200-50

ΔH = 150 kJ

Hence the enthalpy change for the reaction is 150 kJ

Answer:

1-The liquid pressure is same at all points lying on the same horizontal plane in a stationary liquid.

2-The liquid pressure at a point inside the liquid is same in all directions.

3-The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid.

4-The pressure of liquid at same depth is different for different liquids. It is directly proportional to density of liquid. That is, for same depth the liquid pressure is larger for liquid of larger density.

Explanation:

photosynthesis, the process by which green plants and certain other organisms transform light energy into chemical energy. During photosynthesis in green plants, light energy is captured and used to convert water, carbon dioxide, and minerals into oxygen and energy-rich organic compounds.[tex]\pmb{ }[/tex]

Answer:

The height balls rise above the collision point, is approximately 7.37 meters

Explanation:

The given parameters just before the collision are;

The mass, m₁ and velocity, v₁ of the ball moving upward are;

m₁ = 3.0 kg, v₁ = 22 m/s

The mass, m₂ and velocity, v₂ of the ball moving downward are;

m₂ = 1.3 kg, v₂ = -11 m/s (downward motion)

The type of collision = Inelastic collision

We note that the momentum is conserved for inelastic collision

Let, [tex]v_f[/tex], represent the final velocity of the balls after collision, we have;

∴ Total initial momentum = Total final momentum

m₁·v₁ + m₂·v₂ = (m₁ + m₂)·[tex]v_f[/tex]

Therefore, we get;

m₁·v₁ + m₂·v₂ = 3.0 kg × 22 m/s + 1.3 kg × (-11) m/s = 51.7 kg·m/s

(m₁ + m₂)·[tex]v_f[/tex] = (3.0 kg + 1.3 kg) ×

∴ 51.7 kg·m/s = 4.3 kg × [tex]v_f[/tex]

[tex]v_f[/tex] = (51.7 kg·m/s)/4.3 kg ≈ 12.023 m/s

The final velocity, [tex]v_f[/tex] ≈ 12.023 m/s

The maximum height, h, the combined balls will rise from the point of collision, moving upward at a velocity of [tex]v_f[/tex] ≈ 12.023 m/s, is given from the kinetic equation of motion, v² = u² - 2·g·h, as found follows

At maximum height, we have;

[tex]h_{max} = \dfrac{v_f^2}{2 \cdot g }[/tex]

Therefore;

[tex]h_{max} \approx \dfrac{12.023^2}{2 \times 9.81 } \approx 7.37[/tex]

The height the combined two balls of putty rise above the collision point, [tex]h_{max}[/tex] ≈ 7.37 m.

Answer:

It is practiced around the world .

The statement, that is, food irradiation leaves food mildly radioactive is not true.  

• A technology, which uses ionizing radiation to improve safety and extend the shelf life of foods by eliminating and reducing insects and microbes is known as food irradiation.  

• Irradiation is used in canning fruits and vegetables and pasteurizing milk to make food safer for consumption.  

• Irradiation does not compromise nutritional quality, makes food radioactive, or change the texture, text, or appearance of food. The effect of irradiation is so minimal that it is not easy to identify that whether the food is irradiated.  

• Food irradiation has been approved in over forty countries and is almost practiced globally.  

Thus, the statement, that is, it leaves food mildly radioactive is incorrect.  

To know more about:

https://brainly.com/question/19586033

Answer: The scientist named Isaac Newton proposed this universal law of gravitation.

It is given that the bodies in this universe attract one another.

It is required to name the scientist who propounded this statement​.

According to Newton's law of gravitation, every object in the universe attracts every other object with a force that is proportional to the multiplication of the masses and inversely proportional to the square of the distance between the objects. This is the universal law that means this is a constant term that can't be changed with respect to place which was proposed by Isaac Newton in 1687.

Therefore, Isaac Newton proposed this universal law of gravitation.

Learn more about gravitation here:

https://brainly.com/question/12528243

#SPJ5

Answer:

7.35kg

Explanation:

Hope this is helpful :)

Explanation:

distance travelled = average speed x time

                               =30m/s*100s

                                =3000m

Answer:

3000m

Explanation:

30m/s*100s

3000m

A group of two or more atoms.

Answer:

[tex]d=0.59m[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=67.3 kg[/tex]

Spring constant [tex]\mu=1.23 * 10^3 N/m[/tex]

Fall Height [tex]h=0.921m[/tex]

Generally the Energy theorem equation for momentum is mathematically given by

Change in KE=Work done by gravity + work done by spring

[tex]0=mg*(h + d) - \frac{\mu d^2}{2}[/tex]

[tex]0=(67.3 * 9.81 (0.921 + d)) -\frac{(1.23 * 10^3 * d^2}{ 2}[/tex]

[tex]0=608.1-660.213d-615d^2[/tex]

Solving Quadratic equation

[tex]d=0.59m[/tex]

Answer:200 Mpa

Explanation:

Given that diameter of cylinder = d = 1-25cm = 1.25 100 =0.0125m

Load or mass = m = Stress 0 = ? 2500kg

Solution: Formula N = F A

Area of Cross-section of cylinder = A=πr2 A = π(d/2) 2

= π(d2/4)

=(3.14)(0.0125)2/4

A = 1.226x10-4

F ・ mg = = F A 24500 2500 x 9.8 = 24500 N

1-226x10-4

1998 36 867.9

= 200 x 106 Pa

= 200 MPa

*Hope it helps you*

Good luck

Answer:

A

Explanation:

We know that impulse(J) is the force times the change in time OR mass times the change in velocity. Because we're given mass and a final and initial velocity, we'll use the second option written as:

mΔv=J

Since Δ means change in, and Δv= vf-vi, we subtract 10 m/s from 15 m/s to get 5 m/s for Δv.  

Now plugging in Δv and m(1,200 kg)

1,200 kg * 5 m/s =J

6000 kg* m/s = J

Answer:

As we all knows that Matter is everything that occupies in space.

(A) There are three major types of Matter;

(B) (I) If John took five ice cubes from the freezer and place them into a cup after 5 minutes, he returned and saw water this process is called melting.

(ii) if he put the same cup into the freezer and turned into ice in 5 minutes this

process is called freezing.

(iii) if John places the ice from the cup into a pot on a lit stove for 2 minutes and leaves, and he returned and find the pot empty this process is called evaporation.

Answer:

bhai nam kya hai (whats your name)

Explanation:

please comment

Speed = distance /  time

Speed = 12km /  5 minutes

Speed = 2.4 km per minute

Speed is measured per hour, 1 hour has 60 minutes.

2.4 km per minute x 60 minutes = 144 km per hour

Answer:

adaptive optics

Explanation:

simple

Answer:

(a) i) The distance travelled by the cycle in half round is approximately 65.97 m

ii) The displacement is 42 m

(b) (i) The distance travelled in one round is approximately 131.95 m

(ii) The displacement of the cycle in one round is 0

Explanation:

The diameter of the track through which the cycle travels, D = 42 m

(a) i) Half round is the motion of half the length of the circular path

The distance travelled by the cycle in half round = The length of half the circular track = (1/2) × π × D

∴ The distance travelled by the cycle in half round = (1/2) × π × 42 m = 21·π m ≈ 65.97 m

ii) The displacement half round = The change in the location of the cycle = The difference between the start and stop locations of the cycle on a straight line after half round

The angle at the center of the circular path the cycle turns in half round  = 180°

Therefore, the path between the start and stop location of the cycle in half round = The diameter of the circular track

The displacement of the cycle in half round = The diameter of the circular track = 42 m

(b) (i) The distance travelled in one round = The perimeter of the circular track = π·D

∴ The distance travelled in one round = π × 42 m ≈ 131.95 m

(ii) The displacement of the cycle in one round = The change in the location of the cycle

The start and stop location of the cycle after moving one round is the same, therefore, there is no change in the location of the cycle.

Therefore we have;

The displacement of the cycle in one round = 0 (no change in location of the cycle)