Physics is killing me. Any help?

Physics Is Killing Me. Any Help?

Answers

Answer 1

Answer:

The simplified expression is  3.833 x 10⁷ g

Explanation:

Given expression;

3.88 x 10⁷ g  -  4.701 x 10⁵ g

The expression above is simplified as follows;

= (3.88 x 100 x 10⁵ )g  -  ( 4.701 x 10⁵) g

= (388 x 10⁵ )g -  ( 4.701 x 10⁵) g

= (388  - 4.701 ) x (10⁵ )g

= 383.299 x 10⁵ g

In standard form, the simplified expression can be expressed as;

= (3.83299 x 100 x 10⁵) g

= 3.83299 x 10⁷ g

= 3.833 x 10⁷ g

Therefore, the simplified expression is  3.833 x 10⁷ g


Related Questions

Two motors in a factory are running at slightly different rates. One runs at 825.0 rpm and the other at 786.0 rpm. You hear the sound intensity increase and then decrease periodically due to wave interference. How long does it take between successive instances of the sound intensity increasing

Answers

Answer:

[tex]T=1.54s[/tex]

Explanation:

From the question we are told that:

Speed of Motor 1 [tex]\omega_1=825rpm=>2 \pi 13.75[/tex]

Speed of Motor 2 [tex]\omega_1=786rpm=>2 \pi 13.1[/tex]

Therefore

Frequency of Motor 1 [tex]f_1=13.75[/tex]

Frequency of Motor 2  [tex]f_2= 13.1[/tex]

Generally the equation for Time Elapsed is mathematically given by

[tex]T=\frac{1}{df}[/tex]

Where

[tex]df=f_1-f_2[/tex]

[tex]df=13.75-13.1[/tex]

[tex]df=0.65Hz[/tex]

Therefore

[tex]T=\frac{1}{65}[/tex]

[tex]T=1.54s[/tex]

basic source of magnetism is a) charged particles alone b)Movement of charged particles c) Magnetic dipoles d)magnetic domains ​

Answers

Answer:

C . Magnetic dipoles is the correct

Answer:

b). movement of charged particles.

Explanation:

These charges create the nagnetic dipoles.

In part B of the lab, when the current flows through the orange part of the wire from right to left, the wire deflects (or moves) ____. This is in accordance with the right-hand-rule.

Answers

This seems to be incomplete, as we do not have any information about the magnetic field surrounding the wire, but we can answer in a general way.

We know that for a wire of length L, with a current I, and in a magnetic field B, the force can be written as:

F = L*(IxB)

if we define the right as the positive x-axis, and knowing that the current flows to the right, we can write:

I = i*(1, 0, 0)

And the field will be some random vector that can't be parallel to the current because in that case, we do not have any force.

To find the direction of the force, which will tell us the direction in which the wire deflects or moves, first, we need to point with our thumb in the direction of the current, in this case, to the right.

Now, with the hand open, using the tip of our other fingers we point in the direction of the magnetic field.

For example, if the magnetic field is in the positive z-axis, we will point upwards.

Now the palm of our hand tells us in which direction the force is applied.

This is the right-hand rule.

For example, in the case that the current goes to the right and the magnetic field is upwards, we could see that the force is to the front.

answer bhejo please please please​

Answers

Answer:

Various uses of water :

1. Water is used for daily purpose like cooking , bathing , cleaning and drinking.

2. Water used as a universal solvent.

3. water maintains the temperature of our body.

4. Water helps in digestion in our body.

5 .water is used in factories and industries.

6. Water is used to grow plants , vegetables and crops.

Astronaut Jill leaves Earth in a spaceship and is now traveling at a speed of 0.280c relative to an observer on Earth. When Jill left Earth, the spaceship was equipped with all kinds of scientific instruments, including a meter stick. Now that Jill is underway, how long does she measure the meter stick to be?
A) 0.280 m
B) 1.00 m
C) 0.960 m
D) 1.28 m
E) 1.04 m

Answers

(B) 1.00 m

Explanation:

Since the meter stick is traveling with Jill, it will have the same speed as she does so relative to Jill, the meter stick is stationary so its length remains 1.00 m as measured by her.

When astronaut Jill leaves Earth in a spaceship and is now traveling at a speed of 0.280c and measure the meter stick to be 1 meter. Hence, option B is correct.

What is length contraction?

Length contraction is defined as the phenomenon of the moving object being shorter than its appropriate length, measured in the object's rest frame.

When the object travels with the speed of light, the length of the object gets more contracted than its original length, relative to the observer. It is also known as the Lorentz-Fitgerald contraction.

Length contraction, L = L₀√(1-v²/c²), where L is the original length, L₀ is the contracted length. c² is known as the velocity of light. v² is the velocity of the speed of the object.

From the given,

speed of the spaceship = 0.280c      (c is the speed of the light)

Length contraction, L = L₀ √(1-v²/c²)

The stick also travels in the spaceship. Hence, the length of the meter stick does not change. It remains at its original length of one meter.  Thus, the ideal solution is option B.

To learn more about length contraction:

https://brainly.com/question/10272679

#SPJ2

Help! xoxo thank you

Answers

Like charges repel and opposite charges attract.

what are the two main types of sound like soundwave​

Answers

Answer:

acoustic energy and mechanical energy

Explanation:

each type of sounds has to be tackled in their own way.

How much charge is stored on two parallel-plate capacitors by the 12V battery if one is filled with air and the other is filled with a dielectric (k=3.00)

Answers

The question is incomplete, the complete question is;

how much charge is stored on the parallel-plate capacitors by the 12.0 V battery? One is filled with air, and the other is filled with a dielectric for which k = 3.00; both capacitors have a plate area of 5.00×10 −3  m 2  and a plate separation of 2.00 mm.

The capacitance of the capacitor is the quantity of charge stored by the capacitor.

Given that;

C1= εo k * A/d

εo = permittivity of free space

C1 = 8.85 x 10-12 farad per meter *1 * 5.00×10 −3  m 2/2 * 10^-3

= 2.21 * 10^-11 F

C2 = 8.85 x 10-12 * 3 * 5.00×10 −3  m 2/2 * 10^-3

= 6.63 * 10^-11 F

q1 = C1V1 = 2.21 * 10^-11 C * 12 V

= 2.65 * 10^-10 C

q2 = C2V2 = 6.63 * 10^-11 F * 12 V

= 7.96 * 10^-10 C

qtotal = 2.65 * 10^-10 C + 7.96 * 10^-10 C

qtotal = 1.061 * 10^-9C

https://brainly.com/question/17176550

Why are scientific models important?

Answers

Answer:

Scientific models are representations of objects, systems or events and are used as tools for understanding the natural world. Models use familiar objects to represent unfamiliar things. Models can help scientists communicate their ideas, understand processes, and make predictions.

A 700N marine in basic training climbs a 10m vertical rope at constant speed in 8sec. what is power put ​

Answers

Answer:

875 Watts

Explanation:

P = W/t = mgh/t = 700(10)/8 = 875 Watts

What is the volume of a metal block 3cm long by 2cm wide by 4cm high? What would be the volume of a block twice as long, wide, and high?

Answers

Answer:

Volume of a metal block = 24 cm^3

Volume of a block twice as long, wide and high = 192 cm^3

Explanation:

Volume of a block is measured in l*w*h and in the first block, the sides are 3, 2 and 4 and 3*2*4 = 24

Second block, just double each of the lengths to get 6*4*8 = 192

Calculate the kinetic energy of a mass 2kg moving with a velocity of 0.1m/s

Answers

ANSWER-:

1/2 mv²

K.E = 1/2 mv²

K.E = 0.01 J.

Hence, the kinetic energy of a body is 0.01 Joule.

!! HOPE ITS HELP U !!

1/2mv^2
1/2(2)(0.1)^2
= 0.01 J

A block of mass 0.260 kg is placed on top of a light, vertical spring of force constant 5 200 N/m and pushed downward so that the spring is compressed by 0.090 m. After the block is released from rest, it travels upward and then leaves the spring. To what maximum height above the point of release does it rise

Answers

After being released, the restoring force exerted by the spring performs

1/2 (5200 N/m) (0.090 m)² = 12.06 J

of work on the block. At the same time, the block's weight performs

- (0.260 kg) g (0.090 m) ≈ -0.229 J

of work. Then the total work done on the block is about

W ≈ 11.83 J

The block accelerates to a speed v such that, by the work-energy theorem,

W = ∆K   ==>   11.83 J = 1/2 (0.260 kg) v ²   ==>   v ≈ 9.54 m/s

Past the equilibrium point, the spring no longer exerts a force on the block, and the only force acting on it is due to its weight, hence it has a downward acceleration of magnitude g. At its highest point, the block has zero velocity, so that

0² - v ² = -2gy

where y is the maximum height. Solving for y gives

y = v ²/(2g) ≈ 4.64 m

The spaceship Enterprise 1 is moving directly away from earth at a velocity that an earth-based observer measures to be 0.66c. A sister ship, Enterprise 2, is ahead of Enterprise 1 and is also moving directly away from earth along the same line. The velocity of Enterprise 2 relative to Enterprise 1 is 0.34c. What is the velocity of Enterprise 2, as measured by the earth-based observer

Answers

Answer:

The answer is "0.82 c".

Explanation:

Given:

Spacecraft speed 1 is [tex]u = + 0.66 \ c[/tex]

Space velocity 2 relative to spacecraft 1 is [tex]v = + 0.34\ c[/tex]

The spacecraft velocity 2 measured by the Earth observation

   [tex]\to u' = \frac{u +v}{1 + ( \frac{uv}{c^2})}[/tex]

            [tex]= \frac{0.66 \ c +0.34\ c}{ 1+ (\frac{0.66\ c \times 0.33\ c }{c^2})}\\\\ = \frac{1 \ c }{ 1+ (\frac{0.2178\ c^2 }{c^2})}\\\\ = \frac{1 \ c }{ 1+ (0.2178 )}\\\\ = \frac{1 \ c }{ 1.2178 }\\\\=0.82\ c[/tex]

A ball of mass m is dropped from a height h above the ground. neglecting air resistance then determine the speed of the ball when it is at a height y above the ground and determine the speed of the ball at y if at the instant of release it already has an initial upward speed vi at the initial altitude h.​

Answers

Answer:

Explanation:

kinematic equation (g will have a negative value if we assume UP is positive)

v² = u² + 2as

a) v = √(0² + 2(g)(y - h))

b) v = √(vi² + 2(g)(y - h))

A uniform disk turns at 3.6 rev/s around a frictionless spindle. A non rotating rod, of the same mass as the disk and length equal to the disk's diameter, is dropped onto the freely spinning disk . They then both turn around the spindle with their centers superposed.
What is the angular frequency in rev/s of the combination?
please express answer in proper significant figures and rounding.

Answers

Answer:

ω₁ = 2.2 rev/s

Explanation:

Conservation of angular momentum

moment of inertia uniform disk is ½mR²

moment of inertia uniform rod about an end mL²/3

We can think of our rod as two rods of mass m/2 and length R

L = ½mR²ω₀

L = (½mR² + 2(m/2)R²/3)ω₁

ω₁ = ω₀(½mR² / (½mR² + mR²/3))

ω₁ = ω₀(½  / (½  + 1/3))

ω₁ = 0.6ω₀

ω₁ = 2.16

a. Do the waves made by the two faucets travel faster than the waves made by just one faucet?
b. How do you know this? Describe how the two-faucet wave pattern compares with the one-faucet pattern.
c. Describe what happens to the two-faucet wave pattern as the separation of the faucets is increased.

Answers

Answer:

asdasd dsa dasdasd sadas dasd asdasd asd asd dsa asdd 223 aasd ada dasd sa dasd dsaa sd adsd asasd

Explanation:

what are the limitation of clinical thermometer

Answers

Answer:

Their main disadvantage is that they are fairly easy to break and if they do, it results in small splinters of glass and the release of mercury which is quite toxic if absorbed into the body.

A bus starts from rest and accelerates at 1.5m/s squared until it reaches a velocity of 9m/s .the bus continues at this velocity and then deccelerate at -2m/s squared until it comes to stop 400m from it's starting point. how much time did the bus takes to cover the 400m?​

Answers

Answer:

23s

Explanation:

s=ut+1/2at^2

the distance (s) is 400, initial velocity (u) is 0, acceleration (a) is 1.5 therefore

400=0t+1/2(1.5)t^2

400/0.75=0.75t^2/0.75

t^2=√533.33

t=23s

I hope this helps and sorry if it's wrong

Polarized sunglasses:

a. block most sunlight because sunlight is polarized
b. are better but work the same way as non-polarized sunglasses
c. are polarized to filter out certain wavelengths of light
d. block reflected light because reflected light is partially polarized.

Answers

Polarized sunglasses creates filter of vertical openings for light. The light rays will reach the eyes of human vertically only.

The sun rays will not reach human eye directly which will create a shield for sun light burden on human eye.

Polarized sunglasses are best used for blocking and eliminating certain wavelengths of light.

Therefore the correct answer is option C. Polarizes Sunglasses are polarized and it filter out certain wavelengths of light.

Learn more at https://brainly.com/question/24372632

A lightning bolt has a current of 56,000 A and lasts for 80 x 10-6 seconds (80 μs). How much charge (in Coulombs) has flowed in this bolt?

Answers

Answer:

A cloud can discharge as much as 20 coulombs in a lightning bolt.

Describe how the words Science and optics would appear when viewed in a plane mirror?

Answers

Answer:

Lateral inversion will occur in a plane mirror.

Explanation:

When words are displayed in a plane or flat mirror, the result is that if the words are displayed left, they change to right and if they were normally displayed right, they change to left. This phenomenon is known as lateral inversion. So, this will apply to the words, Science and optics. Only the sides will be interchanged.

A plane mirror reflects light, therefore, the image that is produced by it remains the same size. The image produced will not appear upside down. Only the sides will be interchanged.

An electron is released from rest at a distance of 9.00 cm from a fixed proton. How fast will the electron be moving when it is 3.00 cm from the proton

Answers

Answer:

the  speed of the electron at the given position is 106.2 m/s

Explanation:

Given;

initial position of the electron, r = 9 cm = 0.09 m

final position of the electron, r₂ = 3 cm = 0.03 m

let the speed of the electron at the given position = v

The initial potential energy of the electron is calculated as;

[tex]U_i = Fr = \frac{kq^2}{r^2} \times r = \frac{kq^2}{r} \\\\U_i = \frac{(9\times 10^9)(1.602\times 10^{-19})^2}{0.09} \\\\U_i = 2.566 \times 10^{-27} \ J[/tex]

When the electron is 3 cm from the proton, the final potential energy of the electron is calculated as;

[tex]U_f = \frac{kq^2}{r_2} \\\\U_f = [\frac{(9\times 10^9)\times (1.602 \times 10^{-19})^2}{0.03} ]\\\\U_f = 7.669 \times 10^{-27} \ J \\\\\Delta U = U_f -U_i\\\\\Delta U = (7.699\times 10^{-27} \ J ) - (2.566 \times 10^{-27} \ J)\\\\\Delta U = 5.133 \times 10^{-27} \ J[/tex]

Apply the principle of conservation of energy;

ΔK.E = ΔU

[tex]K.E_f -K.E_i = \Delta U\\\\initial \ velocity \ of \ the \ electron = 0\\\\K.E_f - 0 = \Delta U\\\\K.E_f = \Delta U\\\\\frac{1}{2} mv^2 = \Delta U\\\\where;\\\\m \ is \ the \ mass \ of\ the \ electron = 9.1 1 \times 10^{-31} \ kg\\\\v^2 = \frac{ 2 \Delta U}{m} \\\\v = \sqrt{\frac{ 2 \Delta U}{m}} \\\\v = \sqrt{\frac{ 2 (5.133\times 10^{-27})}{9.11\times 10^{-31}}}\\\\v = \sqrt{11268.935} \\\\v = 106.2 \ m/s[/tex]

Therefore, the  speed of the electron at the given position is 106.2 m/s

A cylindrical swimming pool has a radius 2m and depth 1.3m .it is completely filled with salt water of specific gravity 1.03.The atmospheric preassure is 1.013 x 10^5 Pa.

a.calculate the density of salt water.

Answers

Answer:

the density of the salt water is 1030 kg/m³

Explanation:

Given;

radius of the cylindrical pool, r = 2 m

depth of the pool, h = 1.3 m

specific gravity of the salt water, γ = 1.03

The atmospheric pressure, P₀ = 1.013 x 10⁵ Pa

Density of fresh water, [tex]\rho _w[/tex] = 1000 kg/m³

The density of the salt water is calculated as;

[tex]Specific \ gravity \ of \ salt\ water \ (\gamma _s_w) = \frac{density \ of \ salt \ water \ (\rho_{sw})}{density \ of \ fresh \ water \ (\rho_{w})} \\\\1.03 = \frac{\rho_{sw}}{1000 \ kg/m^3}\\\\\rho_{sw} = 1.03 \times 1000 \ kg/m^3\\\\\rho_{sw} = 1030 \ kg/m^3[/tex]

Therefore, the density of the salt water is 1030 kg/m³

A bar of steel has the minimum properties Se = 40 kpsi, Sy = 60 kpsi, and Sut = 80 ksi. The bar is subjected to a steady torsional stress of 15 kpsi and an alternating bending stress of 25 ksi. Find the factor of safety guarding against a static failure, and either the factor of safety guarding against a fatigue failure or the expected life of the part. For the fatigue analysis use Modified Goodman criterion.

Answers

Answer:

The correct solution is:

(a) 1.66

(b) 1.05

Explanation:

Given:

Bending stress,

[tex]\sigma_b = 25 \ kpsi[/tex]

Torsional stress,

[tex]\tau= 15 \ kpsi[/tex]

Yield stress of steel bar,

[tex]\delta_y = 60 \ kpsi[/tex]

As we know,

⇒ [tex]\sigma_{max}^' \ = \sqrt{\sigma_b^2 + 3 \gamma^2}[/tex]

        [tex]= \sqrt{(25)^2+3(15)^2}[/tex]

        [tex]=36.055 \ kpsi[/tex]

(a)

The factor of safety against static failure will be:

⇒ [tex]\eta_y = \frac{\delta_y}{\sigma_{max}^'}[/tex]

By putting the values, we get

        [tex]=\frac{60}{36.055}[/tex]

        [tex]=1.66[/tex]

(b)

According to the Goodman line failure,

[tex]\sigma_a = \sigma_b = 25 \ kpsi[/tex]

[tex]S_e = 40 \ kpsi[/tex]

[tex]\sigma_m = \sqrt{3} \tau[/tex]

     [tex]=\sqrt{3}\times 15[/tex]

     [tex]=26 \ kpsi[/tex]

[tex]Sut = 80 \ kpsi[/tex]

⇒ [tex]\frac{\sigma_a}{S_e} +\frac{\sigma_m}{Sut} =\frac{1}{\eta_y}[/tex]

      [tex]\frac{25}{40}+\frac{26}{80}=\frac{1}{\eta_y}[/tex]

              [tex]\eta_y = 1.05[/tex]

We do not use water instead of mercury in a barometer​

Answers

Answer:

Because

1)Water is relatively less dense. Mercury is 13.6 times more dense than water. SO, If you use water, you have to have the length of barometer of length (or height) 13.534 times the length of mercury barometer, which may be more than 11 meter in length.

2)Also mercury as compared to water, has comparatively less specific heat and good conductor of heat, could come to the same temperature of the atmosphere more quickly.

Answer:

The atmospheric pressure at sea level 76 cm of Hg=1.013× 10⁵ pascal .

Explanation:

That is if water is used in barometer tube instead of mercury the length of the tube must be greater than 10.326 cm.so we cannot replace mercury by water in the barometer.

Which of the following behaviors would best describe someone who is listening and paying attention? a) Leaning toward the speaker O b) Interrupting the speaker to share their opinion c) Avoiding eye contact d) Asking questions to make sure they understand what's being said

Answers

Answer:

D

Explanation:

Anyone could be leaning forward toward the speaker but be distracted and I believe if you're paying attention to the speaker, you would ask questions to make sure you're understanding what they are speaking

Answer:

A

.............................

You are to connect resistors R1 andR2, with R1 >R2, to a battery, first individually, then inseries, and then in parallel. Rank those arrangements according tothe amount of current through the battery, greatest first. (Useonly the symbols > or =, for exampleseries>R1=R2>parallel.)

Answers

Answer:

The current is more in the parallel combination than in the series combination.

Explanation:

two resistances, R1 and R2 are connected to a battery of voltage V.

When they are in series,

R = R1 + R2

In series combination, the current is same in both the resistors, and it is given by Ohm's law.

V = I (R1 + R2)

[tex]I = \frac{V}{R_1 + R_2}[/tex]..... (1)

When they are connected in parallel.

the voltage is same in each resistor.

The effective resistance is R.

[tex]R = \frac{R_1R_2}{R_1 + R_2}[/tex]

So, the current is

[tex]I = \frac{V(R_1+R_2)}{R_1 R_2}[/tex]..... (2)

So, the current is more is the parallel combination.

Use the values from PRACTICE IT to help you work this exercise. If the current in each wire is doubled, how far apart should the wires be placed if the magnitudes of the gravitational and magnetic forces on the upper wire are to be equal

Answers

Which behavior would best describe someone who has good communication skills with customers ? a) Following up with some customers b) Talking to customers more than listening to them c) Repeating back what the customer says d) Interrupting customers frequently

Which was a major effect of Pope Leo III crowning Charlemagne emperor of the Romans ?

Answers

Answer:

The crowning of Charlemagne by Pope Leo III was significant in a number of ways. For Charlemagne, it was necessary because it encouraged to give him higher reliability. It gave him the rank of a dictator, giving him the only ruler in Europe west of the Byzantine emperor in Constantinople.

Other Questions
What percent did the price drop given that Tn = -4n^2+56n-180 , determine the biggest numerical value of Tn The business intelligence environment includes all of the following except: A. BI Infrastructure B. Business Analytics C. Data from the business enviroment D. Cloud-based Storage Which equation is the inverse of 2(x 2)2 = 8(7 + y)? What is a precipitate?1) A solid product of a chemical reaction that is in aqueous form.2) A solid product of a chemical reaction that is not in aqueous form. Look at the graph shown below:which equation best represents the line?A: y=3x+3B: y=1/2x-3C: y= 1/2x+3D: y=3x+ 1/2 solve the inequality 4t^2 9t-2 please show steps and interval notation. thank you! Which table represents the graph below?On a coordinate plane, points are at (0, negative 3), (1, negative 1), (2, 1), (3, 3), (4, 5), and (5, 7). What is the form of government in which the central government gets it's power granted to it from the smaller political units in the country Find the equation of the line passing through the points (2, 4) and (3, 2). calculate the gravitional force in between two object of mass 25kg and 20kg if distance between them is 5m? A quadrilateral that has its opposite sides equal and its angles, not a 90 is called:a. deltoidb. parallelogramc. rectangled. squaree. trapezoid Which is a constructive process? Rivers carrying sediment down stream, the rusting of a bridge, waves cutting back a beach front, volcanic eruption caused by plate tectonics (a) Kafui agreed to pay Basabasa GH5,000.00 if he performed his duties as a second mate on an STC Bus travelling from Accra Ghana to Lagos Nigeria. Basabasa proceeded to act as mate on the Bus, but died a day before the bus arrived at Lagos Nigeria. Alomo, the widow of Basabasa wants to take action in court to recover a portion of the agreed sum. As a lawyer advise her using relevant case law. Four brands of lightbulbs are being considered for use in the final assembly area of the Ford F-150 truck plant in Dearborn, Michigan. The director of purchasing asked for samples of 200 from each manufacturer. The numbers of acceptable and unacceptable bulbs from each manufacturer are shown below. At the 0.10 significance level, is there a difference in the quality of the bulbs? Manufacturer A B C DUnacceptable 29 17 9 22 Acceptable 171 183 191 178 Total 200 200 200 200 H0: There is no relationship between quality and manufacturer.H1: There is a relationship.1) State the decision rule using 0.10 significance level. (Round your answer to 3 decimal places.)Reject H0 if chi-square > 2) Compute the value of chi-square. (Round your answer to 3 decimal places.) Chi-square value Avery Company has two divisions, Polk and Bishop. Polk produces an item that Bishop could use in its production. Bishop currently is purchasing 26,000 units from an outside supplier for $16 per unit. Polk is currently operating at less than its full capacity of 630,000 units and has variable costs of $9 per unit. The full cost to manufacture the unit is $12. Polk currently sells 460,000 units at a selling price of $18 per unit.a. What will be the effect on Avery Companys operating profit if the transfer is made internally?b. What is the minimum transfer price from Polks perspective?c. What is the maximum transfer price from Bishops perspective? A student observes a chemicalreaction where two liquids are mixed together. After the liquids are mixed the beaker feels cold to touch. This reactions is anexample of areaction.Synthesis CombustionExothermicEndothermic Persuasion is generally pretty easy.True or false d. On the afternoon of January 15, 1919, an unusually warm day in Boston, a 17.7-m-high, 27.4-m-diameter cylindrical metal tank used for storing molasses ruptured. Molasses flooded into the streets in a 5-m-deep stream, killing pedestrians and horses and knocking down buildings. The molasses had a density of 1600 kg>m3 . If the tank was full before the accident, what was the total outward force the molasses exerted on its sides Do you believe in aliens? And if so, what's your reasoning for believing in them?