Answer:
0.4 km/h velocity is also the direction their going, in this case the person, that I'll name billy bob joe, is going in so yeh
Explanation:
give me brainliest?
Sally is building a list of the types of matter that have energy. She includes liquids on her list because she can see that liquids flow. Is her list complete?
a. yes, her list with just liquids on it is complete
b. no, she should add only gases to her list
c. no, she should add only solids to her list
d. no, she should add gases and solids to her list
Answer:
I just looked up the types of matter energy has.
Explanation:
I believe the answer is D.
Sally's list of matter that have energy is not complete as all the types of matter have energy as all matter have mass , and mass and energy are related, so she should have added gases and solids to her list.
What is matter?Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it has volume .Matter is composed up of atoms which may or not be of the same type.
Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states such as solids, liquids and gases depending on the conditions of temperature and pressure.
The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.
Learn more about matter,here:
https://brainly.com/question/13556931
#SPJ2
4. Calculate the molar mass of Fe2(SO4)3. Then calculate the mass of iron(III) sulfate of 4.05X1023 formula units. Answer: __269g Fe2(SO4)3_
Answer:
399.88 [tex]\frac{4.05*10^{23} }{6.022*10^{23} }[/tex] =269
Explanation:
399.88 is the molar mass of iron(III) sulfate.
The mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.
Mass from formula unitsTo calculate the molar mass of Fe2(SO4)3, we need to determine the atomic masses of the individual elements involved and multiply them by their respective subscripts:
Fe: 55.845 g/mol (atomic mass of iron)S: 32.06 g/mol (atomic mass of sulfur)O: 16.00 g/mol (atomic mass of oxygen)Fe2(SO4)3 consists of 2 iron atoms, 3 sulfur atoms, and 12 oxygen atoms:
Molar mass of Fe2(SO4)3 = (2 * 55.845) + (3 * 32.06) + (12 * 16.00) = 159.69 g/mol
To calculate the mass of 4.05 × 10^23 formula units of Fe2(SO4)3, we can use the molar mass:
Mass = (4.05 × 10^23) * (159.69 g/mol) = 6.48 × 10^25 g
Rounded to two decimal places, the mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.
More on formula units can be found here: https://brainly.com/question/33740227
#SPJ6
A wave in which particles of matter vibrate at right angles to the direction
the wave travels is called a(n) wave.
Enter the answer
Check It
Answer:
it will transverse wave I think it will help you
PLEASEEEE HELPP
If 359 mL of a gas were contracted to only 269 mL, what would be the initial temperature of it if it measured 422 K after the change?
I NEED IT FAST!!
Answer:
T₁ = 563.19 K
Explanation:
Given data:
Initial volume = 359 mL
Final volume = 269 mL
Final temperature = 422 K
Initial temperature = ?
Solution:
The given problem will be solve through the Charles Law.
Charles Law:
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₁ = V₁T₂ / V₂
T₁ = 359 mL × 422 K / 269 mL
T₁ = 151498 mL.K / 269 mL
T₁ = 563.19 K
What is an animal-like, unicellular protist called?
protozoan
euglenoid
slime mold
decompos
Answer:
protozoan
Explanation:
An animal - like unicellular protist is called a protozoan. Such organisms shows similarities with animals.
Protozoans are unicellular organisms. They are similar to animals in that they perform nearly all life functions that makes animals very unique. They are mostly heterotrophs which feed on foods that have been produced by autotrophs. Examples are flagellates and ciliates.What can you determine about an element if you only know its group number on the periodic table?
A. The total number of protons and neutrons
B. The number of protons
C. The total number of electrons
D. The number of valance elctrons
Answer:
c
Explanation:
3. A property of acids is that they taste sour. A
property of bases is that they feel slippery. Would
you use either of these properties to identify an
unknown substance? Why or why not?
Explanation:
Touching or tasting these unknown substances could be lethal or cause severe burns to your skin, so it is advisable to use other methods to identify substances.
In an electrically neutral atom of any element, there are equal numbers of
A. Protons and neurons.
B. electrons and procons.
C. electrons and neurrons.
D. atomic number and atomia mess. 5
Answer:
B. electrons and protons.
Explanation:
In an electrically neutral atom of any element, there are equal number of protons and electrons in the atom.
Protons are the positively charged particles in an atom.
Electrons are the negatively charged particles within the atom.
When the number of protons and electrons are the same or equal, the atom is neutral.
But when there is an imbalance, an ion results.
- Is energy absorbed or released by a material during the phase change from a solid to a liquid?
A)Absorbed
B)Released
Answer:
A) Abosrbed
Explanation:
The change is endothermic, meaning the material absorbs energy when it changes its phase from a solid to a liqiud.
Apollo 11 made a ______ landing.
Answer:
Apollo 11 made a capsule landing
Explanation:
Answer: i don’t know what type of landing you mean
Explanation:
They did a lunar landing then reentry and then capsule landing.
the rate of effusion of co2 gas through a porous barrier is observed to be 9.31x 10^-4 mol/h. under the same conditions, the rate of effusion of N2 gas would be _______ mol/h
Answer:
[tex]1.167\times 10^{-3}\ \text{mol/h}[/tex]
Explanation:
[tex]R_1[/tex] = Rate of diffusion of [tex]CO_2[/tex] = [tex]9.31\times 10^{-4}\ \text{mol/h}[/tex]
[tex]R_2[/tex] = Rate of diffusion of [tex]N_2[/tex]
[tex]M_1[/tex] = Molar mass of [tex]CO_2[/tex] = 44.01 g/mol
[tex]M_2[/tex] = Molar mass of [tex]N_2[/tex] = 28.0134 g/mol
From Graham's law we have the relation
[tex]\dfrac{R_1}{R_2}=\sqrt{\dfrac{M_2}{M_1}}\\\Rightarrow R_2=\dfrac{R_1}{\sqrt{\dfrac{M_2}{M_1}}}\\\Rightarrow R_2=\dfrac{9.31\times 10^{-4}}{\sqrt{\dfrac{28.0134}{44.01}}}\\\Rightarrow R_2=1.167\times 10^{-3}\ \text{mol/h}[/tex]
The rate of effusion of the [tex]N_2[/tex] gas would be [tex]1.167\times 10^{-3}\ \text{mol/h}[/tex].
Can someone help
Me out pls if your good at chemistry
How many atoms are in a molecule of RSq?
How many grams of water are produced from the decomposition of 63 grams of lithium hydroxide
(LiOH)?
Answer:
18.65004 grams H2O
Explanation:
First, we need to write down the balanced chemical equation for the decomposition reaction:
2LiOH -> H2O + Li2O
Since we have grams of LiOH and we need to know the grams of water, we need to convert to moles since we can only compare moles to moles.
The amu of LiOH is 23.947.
The given grams of LiOH is 63.. To convert to moles, we will divide 63 by 23.947..
This gives us 2.6310 moles LiOH..
To convert to moles of H2O (and later grams of H2O), we will use the mole fractions from the balanced equation...
When we look at the balanced equation we can see that 2 moles of LIOH can produce 1 mol of Water, so:
2.6310 moles [tex]* \frac{1 molH_{2}O}{2 mol LiOH}[/tex] = 1.3155 moles H2O
Now we will convert from moles to grams (we must multiply by the amu)
1.3155 moles H2O = 18.65 grams H2O
According to stoichiometry of the chemical equation of decomposition of lithium hydroxide 23.6 g of water are produced from the decomposition of 63 grams of lithium hydroxide.
What is stoichiometry?Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.It is useful in balancing chemical equations.
In the given example, as 47.9 g of lithium hydroxide produces 18 g water ,therefore 63 of lithium hydroxide will produce 63×18/47.9=23.6 g of water.
Thus, 23.6 g of water are produced from the decomposition of 63 grams of lithium hydroxide.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ2
PLEASE HELP. WILL GIVE BRAINLIEST AND QUESTION WORTH A 100 POINTS. NEED ANDWER ASAP!
Conclusion: In a paragraph, describe how physical and chemical properties help us
identify the difference between metals, nonmetals and metalloids. Discuss
characteristics that metals have in common, characteristics that nonmetals have in
common, and characteristics that metalloids have in common.
Answer:
extensive properties such as mass and volume depend on something like perhaps the amount of what's measured. physical properties can be measured without changing substance chemical identity.
metals are the elements which exhibit degree of metallic behavior is know as metals. non metals are such elements which do not posses any metallic behavior and mekkloids are those elements that posses some of the properties like metal. but they act either like metals or non metals n they also have the same physical properties
A breeder reactor is one type of nuclear reactor. In a breeder reactor, uranium-238 is transformed in a series of nuclear reactions into plutonium-239.
The plutonium-239 can undergo fission as shown in the equation below. The X represents a missing product in the equation.
Compare the amount of energy released by completely fissioned plutonium-239 to the amount of energy released by the complete combustion of the same amount of coal.
Answer:hope this help
Explanation:
help me please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Which products would form if chlorine gas was bubbled through a solution of sodium bromide?
a. Na and BrCl
b. Na snd BrCl2
c. Na and Br2
d. Na(cl)2 and Br2
Answer:
NaCl and Br2
Explanation:
Edge 2020
Answer:
The Answer is C: Na and Br3
Explanation:
What is the molar mass of carbon?
A sample of methane gas collcted t a pressure of 0.0884 atm and a temperature of 6.00 C is found to occupy a volume of 26.5 L. How many moles of CH4 gas are in the sample? ____ mol
Answer:
0.1mole
Explanation:
Given parameters:
Pressure = 0.0884atm
Temperature = 6°C = 6 + 273 = 279K
Volume occupied = 26.5L
Unknown:
Number of moles = ?
Solution:
To solve this problem, we are going to use the ideal gas equation:
PV = nRT
P is the pressure
V is the volume
n is the number of moles
R is the gas constant = 0.082atmLmol⁻¹k⁻¹
T is the temperature.
Insert the parameters and solve for n;
0.084 x 26.5 = n x 0.082 x 279
n = 0.1mole
How do you calculate the percent composition of an element in a compound
Answer:
Percent composition is calculated from a molecular formula by dividing the mass of a single element in one mole of a compound by the mass of one mole of the entire compound. This value is presented as a percentage.
Explanation:
You have a particle of length 68 nm. What is this in meters? ( need help asap)
Answer:
B
Explanation:
Turning on your X-Box is an example of___ energy turning into ___ energy.
A.electrical,nuclear
B.nuclear,sound
C.electrical,light
D.electrical,chemical
Answer:
electrical --> light
Explanation:
I traveled for 0.5 hr at 80 km/h. How far did I travel?
Answer:
[tex]Distance = 40km[/tex]
Explanation:
Given
[tex]Speed = 80km/hr[/tex]
[tex]Time = 0.5hr[/tex]
Required
Determine the distance covered
Distance is calculated as:
[tex]Distance = Speed * Time[/tex]
Substitute values for Speed and Time
[tex]Distance = 80km/hr * 0.5hr[/tex]
[tex]Distance = 80km * 0.5[/tex]
[tex]Distance = 40km[/tex]
Hence, you travelled 40km
In an ionic compound, the negative and positive ions are held together by __________.
Answer:
the third one
Explanation:
What happened when you placed your bottle system
in cold water?
Answer:
The water level in the pipe went down.] ... [The hot water in the cup heated up the water particles inside the bottle. They began to move more. Greater motion (kinetic energy) pushed the particles farther apart, resulting in expansion.
Observe the image of sodium. List the properties you see.
Answer:
It is soft and white. It has a low melting and boiling point, a good conductor electricity, and reacts with water. Furthermore, it is also highly reactive, malleable, and ductile.
Explanation:
Hope I helped!
Answer:
silvery-white and waxy
Explanation:
Properties means the observations you can make just by looking at it or the qualities that the object has.
So when I looked at the sodium I saw a silvery-white metal (sodium is a metal), that has this waxy appearance to it.
what volume (in L) of ethane (C2H6) will be required to produce 42.5 L of carbon dioxide in the reaction below?
2C2H6(g)+7O2(g)->4CO2(g)+6H2O(g)
Answer:
21.25
Explanation:
Chemistry 1 - Types of Radioactive Decay
Answer:
Explanation:
The reaction expression is given as:
⁴⁰₁₈ Ar → X + ⁰₁B
To solve this problem, we must bear in mind that both mass number and atomic number must be conserved.
So;
For the mass number:
40 = A + 0
A = 40
For atomic number:
18 = Z + 1
Z = 18 - 1 = 17
An atom is identifiable by the atomic number. Since the atomic number of X is 17 then it is Cl, chlorine
what elements comprise the largest portion of Earth's atmosphere?
Answer:
Nitrogen and Oxygen make up 99% of the Earths atmosphere. Then Argon makes up the rest of the atmosphere.
