People with low cardiovascular fitness are more prone to heart disease than those whose cardiovascular fitness is high because those with lower cardiovascular fitness will have weaker heart muscles. Thus, the correct option is B.
What is Cardiovascular fitness?Cardiovascular fitness may be defined as the accommodation of the cardiovascular system to furnish oxygenated blood to functioning muscles. It includes the muscles of the heart, lungs, blood vessels, etc.
People with low cardiovascular fitness have lower furnishing of oxygenated blood to various organs like the heart, lungs, etc. Due to this, the muscles of specific body parts or organs may undergo a state of inactivity suddenly for a fraction of seconds.
This activity constantly leads to various heart-related diseases directly or indirectly in the life of an individual.
Therefore, the correct option for this question is B.
To learn more about Cardiovascular fitness, refer to the link:
https://brainly.com/question/11176067
#SPJ1
What happens when you want to move the boat forward? You pull the oars toward yourself.Explain why you do this.
Answer:
You pull on the oars. By the third law, the oars push back on your hands, but that’s irrelevant to the motion of the boat. The other end of each oar (the blade) pushes against the water. By the third law, the water pushes back on the oars, pushing the boat forward.
which chamber approves presidential nomination
Answer: The Senate provides advice and consent on presidential nominations.
1. What two things did Walker learn while she was completing her PhD? How did this impact her studies? Why was one of these things unfortunate? How would you feel if you were in her shoes? Explain.
and 2. What is the visible spectrum? What are the two problems with using visible light to explore the sky?
If we use visible light to explore the sky, a greater part of the universe will not be visible.
During her PhD, Walker learnt that the universe is quite large. As a result, she would need a telescope to learn about the universe rather than a spaceship. Secondly, she learnt that it is impossible to explore the universe on a spaceship rather she had to depend on the principles of astronomy.
The visible spectrum comprises of electromagnetic waves of wavelength 400 nm - 700 nm. If we use visible light to explore the sky, a greater part of the universe will not be visible because we will be limited to seeing only the visible light portion of the electromagnetic spectrum.
Learn more: https://brainly.com/question/8646601
Se aplican dos fuerzas concurrentes a un objeto de 4N a la derecha y 5N a la izquierda. ¿Hacia donde se movió y con cuanta fuerza?
The forces move strongly towards the left by 1N
Given the following
Force towards the right = 4N
Force towards the left = 5N
Note that the force acting towards the left is negative, hence the force acting towards the left is -5N
Take the sum of force
Resultant force = -5N + 4N
Resultant force = -1N
This shows that the forces move strongly towards the left by 1N
Learn more here: https://brainly.com/question/24629099
Calculate the weight of an object that displaces 3 m2 of water and exerts a pressure of 500 Pa (500 N/m ).
The weight of the object from the information provided in the question is 1500 N.
We know that pressure = Force/area. We have the following information from the question;
Pressure =500 Nm-2
Area = 3 m2
Hence;
Force = Pressure × area
Force = 500 Nm-2 × 3 m2
Force = 1500 N
Hence, the weight of the object is 1500 N
Learn more: https://brainly.com/question/8646601
A catamaran with a mass of 5.44×10^3 kg is moving at 12 knots. How much work is required to increase the speed to 16 knots? (One knot = 0.51 m/s.)
show all steps
The work that is required to increase the speed to 16 knots is 14,176.47 Joules
If a catamaran with a mass of 5.44×10^3 kg is moving at 12 knots, hence;
5.44×10^3 kg = 12 knots
For an increased speed to 16knots, we will have:
x = 16knots
Divide both expressions
[tex]\frac{5.44 \times 10^3}{x} = \frac{12}{16}\\12x = 16 \times 5.44 \times 10^3\\x = 7.23\times 10^3kg\\[/tex]
To get the required work done, we will divide the mass by the speed of one knot to have:
[tex]w=\frac{7230}{0.51}\\w= 14,176.47Joules[/tex]
Hence the work that is required to increase the speed to 16 knots is 14,176.47 Joules
Learn more here: https://brainly.com/question/25573786
Can Hotspots can be found at the edges of tectonic plates?
Answer:
No.
Explanation:
Hot spots don't appear at the barriers of tectonic plates, instead, they originate at hot centres known as mantle plumes. Mantle plumes exist below the tectonic plates and may develop a string of volcanoes on the Earths surface.
I agree to hire you for 30 days. You can decide between two methods of payment: either (1) $1000 a day, or (2) one penny on the first day, two pennies on the second day and continue to double your daily pay each day up to day 30. Use quick estimation to make your decision, and justify it
Answer:
The second deal.
Explanation:
I had that before, if u pick the second one you will get twice as much in a year as the first one.
Historia de baloncesto internacional resumen
Answer:
?
Explanation:
NO LINKS! What are the definitions of initial horizontal velocity and initial vertical velocity? Please help! This like is my 10th time asking this question because many people have been scamming me...
Answer:
Additionally, the initial horizontal velocity may be calculated by measuring the diameter d of the ball and dividing the result by the amount of time t required for the ball to pass across the photogate. Vo = d/t is the formula.
Initial vertical velocity is the vertical component of the initial velocity: v 0 y = sin 0 sin 0 = (30.0 m/s) sin 45° = 21.2 m/s
Explanation:
Hope it helps:)
plss helpp:((
(i'll mark as brainliest if u answer)
Answer:
Seriously Your Question Is Kinda Tremendous
Explanation:
I'll Head Is Boiling From Question That Keeps Popping Up My Head, Someone Might Give You A Positive Hand
Name any three things that cause soil pollution
Answer:
garbage , polluted water dam, unexpected dust particle
Acceration is a change in motion over time:
True False
1.How did earthquakes affect the rise and progress of the civilization in America and the Pacific islands?
2. What should you do when a natural disaster like earthquake occurs in your place?
3. Among the three types of waves, what is the most destructive? Why?
Please po pasagot
Based on geographical analysis, the earthquakes affect the rise and progress of the civilization in America and the Pacific islands by causing slope failures, liquefaction, and tsunami.
The effect of earthquakes in America and the Pacific Islands has caused people displacement as buildings collapsed, and water from nearby oceans caused the destruction of physical properties.
For safety reasons, when a natural disaster like an earthquake occurs in your place, you are expected to stay away from buildings if you're outside.
Similarly, if you are in a car, you should stop and pull over.
If you are in bed during the earthquake, wrap your head and neck with a pillow while turning your head upside.
Also, avoid doorways or windows if you are inside.
Considering the three types of waves, the most destructive wave is known as surface waves.
Surface waves have the most potent vibrations and can travel through any earth surface, whether air or water.
Other types of waves include Transverse waves and Longitudinal waves.
Hence, in this case, it is concluded that the effect of earthquakes is negative on human society, and waves can be destructive.
Learn more here: https://brainly.com/question/18972467
Why are people so rude???
Answer:
It could be low self-esteem
Explanation:
There probably insecure have problems and issues of their own could be that were abused growing up and weren’t treated right who knows.
5 a
What causes the pressure of air at the Earth's surface?
Answer:
Atmospheric pressure is caused by the gravitational attraction of the planet on the atmospheric gases above the surface and is a function of the mass of the planet, the radius of the surface, and the amount and composition of the gases and their vertical distribution in the atmosphere
Explanation:
Leverrier predicted that an invisible planet was pulling the planet Uranus off its predicted course around the sun. Likewise, human beings are pulled off course by the invisible forces of their ____________.
Human beings are pulled off course as a result of the invisible forces of the unconscious.
According to Leverrier, he stated that an invisible planet was pulling the planet Uranus off its predicted course around the sun.
In such a way, human beings are pulled off course by the invisible forces of their unconscious minds. The unconscious minds of people control the thoughts of people.
Read related link on:
https://brainly.com/question/25588203
A car starts from rest and accelerates at 2.5m/s^2 for 2s. What is the final velocity of the car
Answer:
5m/s ez
Explanation:
plz make me brainliest
What is the mass, in kilograms, of a large dog that weighs 441 newtons?
Answer:
441 Newtons equals 44.97 kilograms.
A crane lifts a 10000 N load through a distance of 30mins in 40s calculate work done
Given,
Force = 10,000 N
Distance = 30 m
Time = 40 s
Work done = force × distance
Work = 10,000 × 30
Work = 300,000 J
______
꧁✿ ᴿᴬᴵᴺᴮᴼᵂˢᴬᴸᵀ2222 ✬꧂
The work done on the object is equal to the power it experiences which is equal to 735 watts.
What is work done?Work done is defined as the product of force applied and the distance over which the force is applied on the object. Work is done on an object when a force is applied to an object and the object is moved through a particular distance.
The time rate of doing work is called as power, which is designated by the symbol P. It is measured in the units of watts, where one watt is equal to one joule energy applied per second time.
Work done on an object is equal to the force (F) multiplied by the distance d in the direction of the force. Where, time interval is Δt.
P = W/Δt = F × d/Δt = m × g × h/Δt = 100 × 9.8 × 30 / 40
Power = 735 watts
The power of the object is 735 watts.
Learn more about Work done here:
https://brainly.com/question/13662169
#SPJ2
Guys plz i need those answers as soon as possible
9) a) formula = h(ρ)g by default g=9.8m/s²
Pressure = 2×1000×9.8 = 19600Pa
b)
2. What are the challenges of wind energy that causes decrease in the electrical production?
3. Give two solutions:
1. Modification in the structure of the turbine
2. Modification in the function of the turbine.
4. You must estimate the cost in each solution, and which one is more affordable and efficient for the municipality to go for.
5. You must make sure that there is minimal energy loss.
Levelized production cost is a big challenge in the production of wind energy.
The main challenge in the production of wind energy is the high production cost. It has to minimize the Levelized Production Cost (LPC) which is the ratio between energy production cost and economic lifetime. This problem can be solved by doing modification in the structure of the turbine as well as we must ensure minimal energy loss.
The modification in the structure can produce more electrical energy and reduce the energy loss also provides more profit to the company so we can conclude that levelized production cost is a big challenge in the production of wind energy.
Learn more: https://brainly.com/question/25543609
when a mechanical wave travels through a medium, how does the wave affect the medium's particles?
thanks ;w;
Answer:
PLEASE MAARK ME BRAINLEST!!!
Explanation:
The particles of the medium just vibrate in place. As they vibrate, they pass the energy of the disturbance to the particles next to them, which pass the energy to the particles next to them, and so on.
A block of mass =4.20 kg slides along a horizontal table with velocity 0=3.50 m/s . At =0 , it hits a spring with spring constant =26.00 N/m and it also begins to experience a friction force. The coefficient of friction is given by =0.250 . How far has the spring compressed by the time the block first momentarily comes to rest? Assume the positive direction is to the right.
The distance in which the spring is compressed is 1.065 m.
The given parameters;
mass of the block, m = 4.2 kgvelocity of the block, v = 3.5 m/sspring constant, k = 26 N/mcoefficient of friction, μ = 0.25Apply the principle of conservation of energy to determine the distance in which the spring is compressed.
[tex]K.E = W + U\\\\\frac{1}{2} mv^2 = \mu Fx \ + \ \frac{1}{2} kx^2\\\\\frac{1}{2}(4.2)(3.5)^2 = 0.25(4.2 \times 9.8)(x) \ + \frac{1}{2} (26)(x^2)\\\\25.725 = 10.29x \ + \ 13x^2\\\\13x^2 + 10.29x - 25.725 = 0\\\\[/tex]
solve the quadratic equation using formula method;
a = 13, b = 10.29, c = -25.725
[tex]x = \frac{-b \ \ +/- \ \sqrt{b^2 - 4ac} }{2a} \\\\x = \frac{-(10.29) \ \ +/- \ \sqrt{(10.29)^2 \ - \ 4(13\times 25.725)} }{2(13)} \\\\x = 1.065 \ m, \ \ or \ -1.86 \ m[/tex]
choose positive distance, x = 1.065 m.
Thus, the distance in which the spring is compressed is 1.065 m.
Learn more here:https://brainly.com/question/18722006
if you have 3 moles of iron, how many grams of iron do you have?
Answer:
55.84 look at periodic table
so 55.84*3= 167.52gFe
3.
If the specific heat of iron = 0.46 J/g Cº, how much heat is needed to warm 50 g of
iron from 20° C to 100° C?
Answer:
1.84 kJ (kilojoules)
Explanation:
A specific heat of 0.46 J/g Cº means that it takes 0.46 Joules of energy to raise the temperature of 1 gram of iron by 1 Cº.
If we want to heat 50 g of iron from 20° C to 100° C, we can make the following calculation:
Heat = (specific heat)*(mass)*(temp change)
Heat = (0.46 J/g Cº)*(50g)*(100° C - 20° C)
[Note how the units cancel to yield just Joules]
Heat = 1840 Joules, or 1.84 kJ
[Note that the number is positive: Energy is added to the system. If we used cold iron to cool 50g of 100° C water, the temperature change would be (Final - Initial) or (20° C - 100° C). The number is -1.84 kJ: the negative means heat was removed from the system (the iron).
If you drag a 50kg block across the floor which has a coefficient of friction of .30, what is
the force needed to accelerated it at 2.0m/s^2 ?
Answer:
750 Newton
Explanation:
force=mass(acceleration)
A falling object with a weight of 15N is moving downwards towards earth at a steady speed. What is the size of the drag force on this object?
Answer:
15 N :D
Explanation:
The size of the drag force on this object falling at a constant speed is determined as 15 N.
Drag force on the objectThe drag force on the object is determined by calculating the net force on the object;
F(net) = W - D
where;
W is weight of the objectD is the drag force of airma = W - D
at constant speed, acceleration, a = 0
0 = W - D
W = D
15 N = D
Thus, the size of the drag force on this object falling at a constant speed is determined as 15 N.
Learn more about drag force here: https://brainly.com/question/15237524
#SPJ2
A marble is launched at by dropping it through a marble launcher. The marble took 0.22s to land 0.31m from
where it was launched. Find the horizontal velocity of the marble as it rolls off the table.
A. 1.4m/s
B. 0.53m/s
C. 0.71 m/s
D. 0.07m/s
Hi there!
For projectile motion, the horizontal and vertical components are SEPARATE.
We can use the kinematic equation to solve:
dₓ = vₓt
We can rearrange to solve for vₓ:
dₓ/t = vₓ
0.31/0.22 = vₓ
vₓ = 1.4 m/s ⇒ A
definiciones de estrés
Answer:
dame la marca más inteligente, por favor
Explanation:
En el campo de la medicina, es la respuesta del cuerpo a una presión física, mental o emocional. El estrés produce cambios químicos que elevan la presión arterial, la frecuencia cardíaca y las concentraciones de azúcar en la sangre. También suele producir sentimientos de frustración, ansiedad, enojo o depresión.
Answer:
El estrés es la reacción del cuerpo al sentirse amenazado o bajo presión.
Explanation:
