please hellp!!!!!!!!!!!!!!!!!!!!?

Answer:

17

Explanation:

2 x 10 = 20

20-3 = 17

question: is this actually hypothetical?

Explanation:

also just leave the car there go get some McDonald's or sum and come back and if they're still breathing then go ahead and move the car .

Answer:

the same thing the last guy said

Answer:

If the heavy load had been lifted more slowly, the work done on the load would have been the same.

Explanation:

Work done on an object is given as;

W = Fd

where;

F is the force applied on the object

d is the displacement of the object

for the given question, the applied force on the load = mg (mass of the load multiplied by acceleration due to gravity).

Also, the displacement of the object = vertical height the load was lifted.

W = mgh

The work done on the load is independent of time.

Thus, if the heavy load had been lifted more slowly, the work done on the load would have been the same.

A person lifting a heavy load to a vertical height of 2.0 m in 3 seconds does the same work as if he/she lifts it in 6 s.

A person lifts a heavy load to a vertical height of 2.0 m in 3 seconds.

We want to compare the work done with the one that he/she would have done if the process had taken 6 seconds.

In physics, work (W) is the energy transferred to or from an object via the application of force (F) along a displacement (s).

W = F × s

Given the displacement is the same (2.0 m) and the force needed is also the same (weight of the object), the work is the same for both processes.

A person lifting a heavy load to a vertical height of 2.0 m in 3 seconds does the same work as if he/she lifts it in 6 s.

Learn more about work here: https://brainly.com/question/25064916

Answer:

The green car had the greatest momentum

Explanation:

Momentum

Momentum can be defined as "mass in motion" and is calculated as the product of the mass of the object by its velocity.

Being v the magnitude of the velocity and m the mass of the object, the momentum is calculated with:

p = mv

The green car had a mass of m1=1200 kg and crossed the finish line at v1=53 m/s. Hence, its momentum was:

p1 = 1200 Kg * 53 m/s = 63600 Kg.m/s

The red car had a mass of m2=1100 kg and crossed the finish line at v2=55 m/s. Hence, its momentum was:

p2 = 1100 Kg * 55 m/s = 60500 Kg.m/s

Since p1 > p2, then the green car had the greatest momentum

Answer:

VAB = 20km/hr

Explanation:

Given the following data;

Velocity of car A, VA = 60km/hr

Velocity of car B, VB = 80km/hr

To find the relative velocity of B w.r.t A, VAB;

Since the two cars are moving in the same direction, we have;

VAB = VB - VA

Substituting into the equation, we have;

VAB = 80 - 60

VAB = 20km/hr

Therefore, the relative velocity of car B with respect to car A is 20 kilometers per hour.

Answer: kinetic energy decreases

Explanation:

When the angle between the net force and the displacement of an

object is greater than 90 degree, the Kinetic energy decreases.

The work done by a net force in moving an object over a given distance is given as;

[tex]W = F \times d \ cos(\theta)[/tex]

where;

The value of cos(θ) decreases from 0 to 180, consequently, the value of work-done will decrease as well.

Based on work-energy theorem, the work done on the object is equal to kinetic energy of the object.

[tex]W = K.E[/tex]

Thus, we can conclude that when the angle increases, the Kinetic energy decreases.

Learn more about kinetic energy here:https://brainly.com/question/10063455

Answer:

F=84.0 Hz

Explanation:

Using the equation f= n (v/2L),  frequency equals number of loops times velocity over 2 times the length, in order to get 60.0 Hz of frequency from 5 loops, v/2L would have to equal 12. (12*5=60) v/2L is constant, so to find the frequency of 7 loops you would times 7 by 12 to get 84.0.

Hope this helped! :)

Answer: 10

Explanation:

The mechanical advantage of that pulley is 10.

The force amplified by utilizing a tool, mechanical device, or machine system is known as mechanical advantage. To achieve the desired output force amplification, the gadget trades off input forces against movement. The law of the lever serves as a paradigm for this.

Mechanisms are machine parts made to control forces and motion in this way.

Given that: the weighs of the object: W = 100 Newton.

Applied force: F = 10 N.

For using a pulley, you have to apply a force of 10 Newtons to lift  an object that weighs 100 Newtons.

Hence, the mechanical advantage of the pulley is

= Weighs of the object/applied force

= 100 Newton / 10 Newton.

= 10.

The mechanical advantage of it is 10.

Learn more about mechanical advantage here:

https://brainly.com/question/16617083

#SPJ5

Answer:-The formula of to calculate  KE = 1/2 m v^2

so we,

           KE = 1/2 (450kg)(23m/s)^2

           KE = 1/2 ×238050

            KE = 119025

Explanation: In Physics Formulas mean everything.

the more people (greater mass) you load into a car, the more it will accelerate with the same force applied by the engine.

Answer:

27.91ohms

Explanation:

From the question we are given the following

Voltage across the inductor VL = 120V

Current in the inductor I = 4.3A

Required

Inductive reactance XL

Using two formula

VL =IXL

XL = VL/I

XL = 120/4.3

XL = 27.91ohms

Hence the inductive reactance is 27.91ohms

Answer:

  T₀ = 2π [tex]\sqrt{\frac{m}{k} }[/tex]           T = [tex]\sqrt{\frac{5}{6} }[/tex] T₀

Explanation:

When the block is oscillating it forms a simple harmonic motion, which in the case of a spring and a mass has an angular velocity

        w = [tex]\sqrt{k/m}[/tex]

To apply this formula to our case, let's look for the equivalent constant of the springs.

Let's start with the springs in parallels.

* the three springs in the upper part, when stretched, lengthen the same distance, therefore the total force is

       F_total = F₁ + F₂ + F₃

the springs fulfill Hooke's law and indicate that the spring constant is the same for all three,

       F_total = - k x - k x - kx = -3k x

therefore the equivalent constant for the combination of the springs at the top is

      k₁ = 3 k

* the two springs at the bottom

following the same reasoning the force at the bottom is

        F_total2 = - 2 k x

the equivalent constant at the bottom is

         k₂ = 2 k

now let's work the two springs are equivalent that are in series

the top spring is stretched by an amount x₁ and the bottom spring is stretched x₂

            x₂ = x -x₁

            x₂ + x₁ = x

if we consider that the springs have no masses we can use Hooke's law

            [tex]-\frac{F_{1} }{k_{1} } - \frac{F_{2}}{k_{2} } = \frac{F}{k_{eq} }[/tex]

therefore the equivalent constant is the series combination is

             [tex]\frac{1}{k_{eq} } = \frac{1}{k_{1} } + \frac{1}{k_{2} }[/tex]

we substitute the values

             \frac{1}{k_{eq} }  = \frac{1}{3k } + \frac{1}{2k }  

             \frac{1}{k_{eq} }  = \frac{5}{6k} }  

              k_eq = [tex]\frac{6k}{5}[/tex]  

therefore the angular velocity is

             w = [tex]\sqrt{\frac{6k}{5m} }[/tex]  

angular velocity, frequency, and period are related

           w = 2π f = 2π / T

           T = 2π / w

            T = 2π [tex]\sqrt{\frac{5m}{6k} }[/tex]

           T₀ = 2π [tex]\sqrt{\frac{m}{k} }[/tex]

           T = [tex]\sqrt{\frac{5}{6} }[/tex] T₀

Answer:

70.6N

Explanation:

Given parameters:

Impulse  = 494Ns

Time  = 7s

Unknown:

Force applied = ?

Solution:

To solve this problem, we use the formula of impulse;

      Impulse = Force x time

Now insert the parameters and solve;

       494  = Force x 7

            Force  = [tex]\frac{494}{7}[/tex]  

          Force  = 70.6N

Answer:

i think its D

Explanation:

Answer and Explanation:

The computation is shown below:

As we know that

Frequency = Speed ÷ wavelength

= (3 × 10^8 )÷ (632.8 × 10^-9)

= 4.74 × 10^14 Hz

Speed in flourite is

= Vaccum speed ÷ refraction index

= 3 × 10^8 ÷ 1.434

= 2.092 × 10^8 m/s

wavelength is

= Speed in flourite ÷ frequency

= (3 × 10^8 × 632.8 × 10^-9) ÷ (1.434 × 3 × 10^8)

= 441.28nm

Answer:

yes .

Explanation:

...

;-; :) have a good day

Answer:

because on air the speed is high compared to walking

Answer:

fixed pulley: A pulley system in which the pulley is attached to a fixed point and the rope is attached to the object. ... movable pulley: A pulley system in which the pulley is attached to the object; one end of the rope is attached to a fixed point and the other end of the rope is free.

Explanation:

Answer:

(a) You can tell that have the same strength because they have attracted the same amount of paper clips.

(b) Iron is used in electromagnets because steel retained magnetic properties after the power was turned off, but in the iron, the paper clips dropped off right away.

Answer: 85J

Explanation:

From the question, we are informed that when spring was wound, 100J of work was done but 15J escaped to the surrounding as heat.

Therefore, the change in internal energy of the spring will be calculated as:

ΔU = q + w

where, q = -15J

w = 100J

ΔU = -15J + 100J

= 85J

Answer:

104653.13J

Explanation:

Given parameters:

Mass of roller coaster  = 625kg

Speed  = 18.3m/s

Unknown:

Kinetic energy  = ?

Solution:

The kinetic energy is the energy due to the motion of a body.

     Kinetic energy  = [tex]\frac{1}{2}[/tex] x m x v²  

m is the mass

v is the speed

    Kinetic energy  =  [tex]\frac{1}{2}[/tex]  x 625  x  18.3²   = 104653.13J

Answer:

B. some isotopes are stable and others are unstable. unstable isotopes decay by emitting various subatomic particles and radiation.

Explanation:

test gave me the answer so yeah :/ XD

Answer: f = -12 cm

Explanation: Combined lenses is an array of  simple lenses with a common axis. The combination is useful for correction of optical aberrations which cannot be corrected by simple lenses.

When two lenses are in contact and are thin, focal lengths are related as:

[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}}[/tex]

If there is a distance between the lenses, the focal length will be:

[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}} -\frac{d}{f_{1}f_{2}}[/tex]

Since the lenses in the question above are thin and in contact, the focal length of one of them will be:

[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}}[/tex]

[tex]\frac{1}{f_{2}} =\frac{1}{f_{1}} -\frac{1}{F}[/tex]

[tex]\frac{1}{f_{2}} =\frac{1}{8} -\frac{1}{24}[/tex]

[tex]\frac{1}{f_{2}} =\frac{-2}{24}[/tex]

[tex]f_{2}=[/tex] -12

The focal length of the other lens is -12 cm, with the negative sign meaning it's a converging lens.

Answer:

A High-to-Low

Explanation:

its like water running down a hill.

Answer:

The minimum uncertainty in its position is 1.85 x 10⁻³² m.

Explanation:

Given;

mass of the ball, m = 47.5 g = 0.0475 kg

speed of the ball, v = 30 m/s

measuring accuracy of the speed, = 0.2% = 0.002

The uncertainty in measurement of momentum;

ΔP = mΔv

ΔP = (0.0475)(30 x 0.002)

ΔP = 2.85 x 10⁻³ kgm/s

The uncertainty in position is calculated as;

[tex]\delta x \geq \frac{h}{4\pi (\delta P)}[/tex]

where;

h is Planck's constant

[tex]\delta x \geq \frac{6.626 \ \times \ 10^{-34}}{4\pi (2.85 \ \times \ 10^{-3})} \\\\\delta x \geq 1.85 \ \times \ 10^{-32} \ m[/tex]

Thus, the minimum uncertainty in its position is 1.85 x 10⁻³² m.

(a) The plane makes 4.3 revolutions per minute, so it makes a single revolution in

(1 min) / (4.3 rev) ≈ 0.2326 min ≈ 13.95 s ≈ 14 s

(b) The plane completes 1 revolution in about 14 s, so that in this time it travels a distance equal to the circumference of the path:

(2π (23 m)) / (14 s) ≈ 10.3568 m/s ≈ 10 m/s

(c) The plane accelerates toward the center of the path with magnitude

a = (10 m/s)² / (23 m) ≈ 4.6636 m/s² ≈ 4.7 m/s²

(d) By Newton's second law, the tension in the line is

F = (1.3 kg) (4.7 m/s²) ≈ 6.0627 N ≈ 6.1 N

Answer:

y = 160t - 16t²

Explanation:

Using y = ut -1/2gt² where y = height of heavy rock above the ground, u = initial launch velocity of rock = 160 ft/s, g = acceleration due to gravity = 32 ft/s² and t = time.

So, substituting the values of the variables into y, we have

y = (160 ft/s)t -1/2 × 32 ft/s² × t²

y = (160 ft/s)t - (16 ft/s²)t²

y = 160t - 16t²

So, the height function is y = 160t - 16t²

Answer:

Ball moves up and down repeatedly on surface because waves consist of successive crests and troughs moving across surface, each crest pushes ball up and each trough allows it to move down.

Explanation: