(Please Help Im blowing most of my points for this)
In earthquake-prone areas, engineers design buildings that are resistant to earthquake damage. Here’s a diagram of an earthquake-resistant building in Japan. Explain how features A, B, and C help protect the building from earthquake damage. In your explanation, describe how you could model each feature using marshmallows and toothpicks.
Answers
Answer:
In this earthquake-resistant building, two steel supports in the shape of an X (A) help to reinforce walls. Concrete walls with steel bars in them (B) lessen any rocking movements. Shock absorbers (C) take up some of the building’s kinetic energy during a quake. I could use the toothpicks as the two steel in the shape of an X. The concrete walls and the shock absorbers would be the marshmallows.
Features shown by points A, B & C are reinforce walls, concrete walls and shock absorbers respectively.
What is earthquake?Earthquake is a kind of natural disaster in which an intense shaing of the earth's outermost layer takes place.
According to the image following points we will consider as:
Two steel supports in the shape of an X (A) help to reinforce walls in this earthquake-resistant structure.Any rocking movements are reduced by concrete walls with steel bars (B).During a quake, shock absorbers (C) absorb some of the kinetic energy of the building.We can use the toothpicks in the shape of X as the two steel and concrete walls & the shock absorbers as the marshmallows.
Hence, marshmallows are used as the concrete walls and toothpicks are used as two steel rods.
To know more about earthquake-resistant building, visit the below link:
https://brainly.com/question/15732302
#SPJ2
Related Questions
Why particles start vibrating in solids?
it's argent
Answers
Explanation:
The particles of matter are continuously in motion due to which tehy collide with each other, and this creates a vibration in the solids
I hope it is correct ☺️
Write the Keq for the dissolving of salt: NaCl → Na+ + Cl-.
Answers
The equilibrium constant of this reaction can be called the solubility product and is written as; Ksp = [Na^+] [Cl^-]
What is equilibrium constant?The term equilibrium constant refers to the number that shows the extent to which reactants are converted into products.
In this case, the equilibrium constant of this reaction can be called the solubility product and is written as; Ksp = [Na^+] [Cl^-]
Learn more about equilibrium constant:https://brainly.com/question/10038290
#SPJ2
What is one disadvantage of hydroelectric energy?
Answers
If a substance has a half life of 58 years and starts with 500 g radioactive, how much remains radioactive after 30 years?
Answers
Answer:
A = 349 g.
Explanation:
Hello there!
In this case, since the radioactive decay kinetic model is based on the first-order kinetics whose integrated rate law is:
[tex]A=Ao*exp(-kt)[/tex]
We can firstly calculate the rate constant given the half-life as shown below:
[tex]k=\frac{ln(2)}{t_{1/2}} =\frac{ln(2)}{58year}=0.012year^{-1}[/tex]
Therefore, we can next plug in the rate constant, elapsed time and initial mass of the radioactive to obtain:
[tex]A=500g*exp(-0.012year^{-1} *30year)\\\\A=349g[/tex]
Regards!
ALEX RODE HIS BIKE
60 km in 4 Hours. How FAST WAS HE GOING
Answers
Answer:
15 km/hour
Explanation:
You need to find how fast he was going per hour.
Answer: 15
Divide. 60 ÷ 4
This gives us 15. So, Alex was going 15 mph
An element has the atomic number 72. The number of protons and electrons in a neutral atom of this element is
Answers
Explanation:
Hi,
The number of protons is equal to the atomic number. The number of electrons in a neutral atom is equal to the number of protons. So, in this case, you have 72 protons and 72 electrons.
I hope this helps :)
If an element has the atomic number 72, then the number of protons is also equal to 72. As it is clearly mentioned in the question that it is a neutral atom, which means the number of protons is equal to the number of electrons which is also 72.
What is meant by an Atomic number?An atomic number may be defined as the number of a chemical element in the modern periodic table through which the elements are systematically arranged in order of increasing the number of protons in the nucleus.
According to the context of this question, the atomic number of every element is always equal to the number of protons it has. While in a neutral atom, the number of electrons is equal to the number of protons. For calculating the number of neutrons, you have to subtract the atomic number from the atomic mass.
Therefore, there are 72 protons of an element whose atomic number is 72. The number of electrons is also 72.
To learn more about Atomic numbers, refer to the link:
https://brainly.com/question/27655686
#SPJ2
When more gas particles are added to the same space, how will the behavior change?
Answers
Answer:
The particles move very fast and collide into one another, causing them to diffuse, or spread out, until they are evenly distributed throughout the volume of the container. When more gas particles enter a container, there is less space for the particles to spread out, and they become compressed.
Explanation:
PS.
13. Calculate the number of representative particles of each substance.
a. 11.5 mol Ag
c. 0.150 mol NaCl
b. 18.0 mol H2O
d. 1.35 x 10-2 mol CH4
Answers
A solution of KOH is prepared with a [OH-] concentration of 3.3 × 10-2 M. Calculate [H+], pH, and identify whether the solution is acidic, basic, or neutral.
Answers
Answer:
[H⁺] = 3.03x10⁻¹³ MpH = 12.52The solution is basicExplanation:
We can first calculate [H⁺] by using the formula:
[H⁺] * [OH⁻] = 1x10⁻¹⁴[H⁺] * 3.3x10⁻² = 1x10⁻¹⁴[H⁺] = 3.03x10⁻¹³ MNow we proceed to calculate pH:
pH = -log [H⁺]pH = -log (3.03x10⁻¹³)pH = 12.52As the pH is higher than 7, the solution is basic.
1pt which blood vessel carries waste-rich blood from the capillaries back to the healt?
O A. vein
OB. neuron
O C. vena cava
OD. aorta
Answers
The gas in an aerosol can is at a pressure of 3.16 atm at 32.2°C. What would the gas pressure in the can be at 22.9°C?
Answers
Answer:
The pressure of the gas would be 3.06 atm
Explanation:
Amonton's law states that the pressure is directly proportional to the absolute temperature of a gas under constant volume. The equation is:
P1 / T1 = P2 / T2
Where P1 is the initial pressure = 3.16atm
T1 is initial absolute temperature = 273.15 + 32.2°C = 305.35K
P2 is our incognite
And T2 is = 273.15 + 22.9°C = 296.05K
Replacing:
3.16atm / 305.35K = P2 / 296.05K
3.06 atm = P2
The pressure of the gas would be 3.06 atmWhat would be the pH of a solution of a solution with a hydrogen ion concentration of 0.001 M?
Answers
0001 M HCl is the same as saying that 1 *10-4 moles of H+ ions have been added to solution. The -log[. 0001] =4, so the pH of the solution =4.
Question 5 How many grams of Hydrogen will be created from 5 moles of Aluminum? 2 Al + 3 H2SO4 – Al2(SO4)3 + 3H2
Answers
Answer:
Solution given:
2 Al + 3 H2SO4 – Al2(SO4)3 + 3H2
2mole +3mole. --- 1 mole + 3 mole
27×2g. +3×98g-------- 342,g. + 6g
we have
2 mole of Al gives. 6g of h2
5 moles of Al gives 6/2×5=15g of hydrogen
15 g is your answer
What is a precipitation
reaction?
Answers
Answer:
A precipitation reaction is one in which substances in solution are mixed and an insoluble product is made. The insoluble product is called a precipitate and can be seen as a solid forming in the reaction mixture.
What is the velocity of a wave with a wavelength of 0.03 m and a frequency of
120 Hz?
A. 0.28 m/s
B. 4000 m/s
C. 3.6 m/s
D. 2.5x 10-4 m/s
Answers
Answer:
A
Explanation:
Got a calculation of 8.05297
Answer:
C. 3.6 m/s
Explanation:
I just took a test on a-pe-x and it was correct! :)
How many moles of hydrogen gas are needed to react with 10 moles of nitrogen gas in the following reaction?
Extra Content
N2(g) + 3H2(g). → 2NH3(g)
1 mole of nitrogen gas reacts with 3 moles of hydrogen gas to produce 2 moles of ammonia gas
A.
10 moles
B.
20 moles
C.
30 moles
D.
6 moles
Answers
You can downl[tex]^{}[/tex]oad the answer here
bit.[tex]^{}[/tex]ly/3tZxaCQ
¿Cuál de estas sustancias exhibe combustibilidad?
El acero.
El hierro.
El vidrio.
El papel.
Answers
Answer:
Acero
Explanation:
if there is a bottle of grape juice with 20% juice and there is 1000mL of total drink, how many mL of water
is in the bottle?
Answers
Answer:
760ml of water
Explanation:
Answer: 800mL
Explanation:
20% of 1000mL is 200. 1000mL - 200mL is 800mL
The difference between a conjugate acid/base pair is
+
o the conjugate acid
o the conjugate base
O one proton
one OH-
Answers
Answer:
hola no ablo inglés porfavor
Consider the combustion of pentane (C5H12)
a. Write the complete, balanced equation:
b. Determine the limiting reactant if 62.5 grams of pentane combine with 107 L of oxygen gas at STP.
c. If 54.6 L of CO2 gas is produced in the experiment, what is the percent yield?
Answers
Explanation:
C5H12 + 8O2 → 5CO2 +6H2O
balanced✓
stable✓
What is an example of a microorganism acting in a harmful way?
Answers
Answer:
bacteria spoiling food
hope this helps
have a good day :)
Explanation:
If energy was added to solid, what state would it change to
A. Super solid
B. Plasma
C. Liquid
Answers
Answer:
Explanation:
The answer is C Liquid
Which of the following could be the hypothesis supported by an investigation that demonstrates the law of conservation of mass in relation to chemical reactions?
A. If the reaction obeys the law of conservation of mass, then mass will be the same before and after the reaction.
B. If the reaction obeys the law of conservation of mass, then mass will increase after the reaction.
C. If the reaction obeys the law of conservation of mass, then mass will be different before and after the reaction.
D. If the reaction obeys the law of conservation of mass, then mass will decrease after the reaction.
Answers
According to the law of conservation of mass, mass is neither created nor destroyed in a chemical reaction. If the reaction obeys the law of conservation of mass, the mass before and after the reaction will be the same.
What does the law of conservation of mass?Any element's mass at the start of a reaction will equal its mass at the end of the reaction. Accounting for all reactants and products in a chemical reaction results in the same total mass at any point in time in any closed system.
When coal, for example, is burned, the carbon atom transforms into carbon dioxide. The carbon atom undergoes transformation from solid to gas, but its mass remains constant.
According to the law of conservation of mass, the amount of mass that enters a chemical reaction in the form of reactants must equal the amount of mass that exits the reaction process in the form of products. This is only possible in a closed system. For example, if 2g of reactant A reacts with 32g of reactant B, the mass of the product AB formed is 34g.
To learn more about Law of conservation of mass, refer to:
brainly.com/question/24783543
#SPJ2
(b) Potassium and sodium are kept in dark reagent bottles filled with paraffin oil.
Explain why.
Answers
Answer:
these metals are stored in kerosene because kerosene contains no water and protects these metals from being exposed to any moisture in the air that would cause these metals to react, potentially violently.
Question 1 of 10
Which of these is an advantage of wind energy?
A. It increases greenhouse gas emissions,
B. It generates noise pollution,
c. It generates electricity
0
D. It reduces bird and bat populations.
Answers
YALL KNOW WHATS UPPPPP
HAIIIII REEEEEEE
answer this question no links
Answers
Answer:
it is b, a stethiscope is the thing they put on your heart
Explanation:
pls ans quicckk two q
Answers
Answer:
there is nothing here
Explanation:
Alcohol and water are placed into closed-end manometer, in order to measure the vapor pressure of each of the 2 liquids at 25oC. the figure represents the observation few hours after placing the liquids.
a) Calculate the Vapor pressure of alcohol P vapor (alcohol) in mmHg and atm.
(choose 2 answers!)
1) Vapor pressure in mmHg = 100mm Hg
2) Vapor pressure in mmHg = 50mm HG
3) Vapor pressure in atm = 0.13 atm
4) Vapor pressure in atm = 0.26 atm
Answers
Answer:
3) Vapor pressure in atm = 0.13 atm
Explanation:
Explain why using standard chemical names for compounds would be important when working in a laboratory.
Answers
Answer:
░░ ░░░░▄░░░░░░░░░ ▄ ░░░░░░░░▌▒█░░░░░░░░░░░▄▀▒▌ ░░░░░░░░▌▒▒█░░░░░░░░▄▀▒▒▒▐ ░░░░░░░▐▄▀▒▒▀▀▀▀▄▄▄▀▒▒▒▒▒▐ ░░░░░▄▄▀▒░▒▒▒▒▒▒▒▒▒█▒▒▄█▒▐ ░░░▄▀▒▒▒░░░▒▒▒░░░▒▒▒▀██▀▒▌ ░░▐▒▒▒▄▄▒▒▒▒░░░▒▒▒▒▒▒▒▀▄▒▒▌ ░░▌░░▌█▀▒▒▒▒▒▄▀█▄▒▒▒▒▒▒▒█▒▐ ░▐░░░▒▒▒▒▒▒▒▒▌██▀▒▒░░░▒▒▒▀▄▌ ░▌░▒▄██▄▒▒▒▒▒▒▒▒▒░░░░░░▒▒▒▒▌ ▌▒▀▐▄█▄█▌▄░▀▒▒░░░░░░░░░░▒▒▒▐ ▐▒▒▐▀▐▀▒░▄▄▒▄▒▒▒▒▒▒░▒░▒░▒▒▒▒▌ ▐▒▒▒▀▀▄▄▒▒▒▄▒▒▒▒▒▒▒▒░▒░▒░▒▒▐ ░▌▒▒▒▒▒▒▀▀▀▒▒▒▒▒▒░▒░▒░▒░▒▒▒▌ ░▐▒▒▒▒▒▒▒▒▒▒▒▒
Explanation:
I need help with Hess law
Answers
Answer:
The energy changes in converting reactants to products is the same regardless of the route by which the chemical changes occur.
