Please help me and all my other questions imma fr fail 10th and I need help (Find the perimeter of a Regular Pentagon with consecutive vertices at (-3,4) and (2, 6)

The cost of one small crate of apples is $12 and the cost of one large crate of peaches is $8. The cost of 7 small cates of apples and 5 large containers of peach is $126.

The system of equations that describe the question is:

3s + 10l = 116 equation 1

11s + 20l = 292 equation 2

Where:

s = cost of one small crate of apples

l = cost of one large crate of peaches

The elimination method would be used to determine the values of s and l.

Multiply equation 1 by 2

6s + 20l = 232 equation 3

Subtract equation 3 from equation 2:

5s = 60

Divide both sides of the equation by 5

s = 60 / 5

s = $12

Substitute for s in equation 1:

3(12) + 10l = 116

36 + 10l = 116

10l = 116 - 36

10l = 80

l = 80 / 10

l = 8

Cost of 7 small crates of apples and 5 large containers of peaches = (7 x 12) + (8 x 5) = $124

To learn more about simultaneous equations, please check: https://brainly.com/question/25875552

#SPJ1

The sugar concentration would be approximately 62.5%.

To find the concentration of sugar in the solution, we need to use the formula:

In this case, the solute is sugar and the solvent is water. We are given that the mass of sugar is 50 grams and the mass of water is 30 grams. However, we need to convert the mass of water to volume since we need the volume of the entire solution to calculate the concentration.

We can assume that the density of water is 1 g/mL, so the volume of water is 30 mL. The total volume of the solution is therefore 50 mL + 30 mL = 80 mL.

Now we can use the formula to find the concentration of sugar:

So the concentration of sugar in the solution is approximately 0.625 grams per milliliter.

learn more about Sugar:

https://brainly.com/question/501165
#SPJ4

The answers to the questions (a) the proportion who graduated in the top 25 percent of their high school class will be 0.672 and (b) the ratio in favor of having graduated in the top 25 percent of their high school class is 2:3.

(a) For first-time college students, the proportion who graduated in the top 25 percent of their high school class (rounded to three decimal places) is 0.672.

(b) For transfer students, the ratio in favor of having graduated in the top 25 percent of their high school class is 0.67:1. It is said that 0.666666666666667 proportion graduated in the top 25 percent of their high school class. This can be simplified as follows:0.666666666666667=20/30=10/15=2/3. Therefore, the ratio in favor of having graduated in the top 25 percent of their high school class is 2:3.

To know more about proportion click here:

brainly.com/question/7096655

#SPJ11

Answer:

Elise's average pay per hour for the year 2017 was £11.88.

Step-by-step explanation:

First, we need to calculate Elise's monthly salary in 2017 after the 3% increase:

3% of £2100 = 0.03 x £2100 = £63

Elise's new monthly salary in 2017 = £2100 + £63 = £2163

Next, we need to calculate her total earnings in 2017:

Total earnings = monthly salary x number of months worked

Elise worked for 45 weeks in 2017, which is approximately 10.4 months:

Total earnings = £2163 x 10.4 = £22,477.20

Finally, we can calculate her average pay per hour for the year:

Total number of hours worked = 42 hours/week x 45 weeks = 1890 hours

Average pay per hour = total earnings / total number of hours worked

Average pay per hour = £22,477.20 / 1890 hours = £11.88 per hour

Answer:

I got $13.73 per hour

Step-by-step explanation:

If you multiply 2100 by 12 months you get $25200 for an annual salary before percent increase.

Then you include the 3% salary increase each month 25200 x .03 = 756 then add the two 25200 + 756 = 25956 OR you can calculate the longer way by doing each individual month, either way it will be the same answer. 2100 x .03 = 63 then 2100 + 63 = 2163 then 2163 x 12 = 25956

Then you divide 25956 by the number of weeks worked in the year. 25956/45 = 576.8

So, each week $576.8 was earned.

Then to get an hourly rate, you divide this by the number of hours worked in each week. 576.8/42 = 13.73

So, the hourly rate is $13.73.

I hope this helped :)

Answer:

If the store marks up the price of the diving board by 45%, the selling price will be 100% + 45% = 145% of the cost price.

Let's calculate the selling price:

Selling price = Cost price + Mark-up

Mark-up = Selling price - Cost price

Mark-up = (145% of cost price) - cost price

Mark-up = 0.45 * cost price

We know that the store paid $261 for the diving board, so:

Mark-up = 0.45 * $261 = $117.45

Therefore, the amount of the mark-up is $117.45.

well, what's 45% of 261?

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{\textit{\LARGE a}\% of \textit{\LARGE b}}\\ \cline{1-1} \\ \left( \cfrac{\textit{\LARGE a}}{100} \right)\cdot \textit{\LARGE b} \\\\ \cline{1-1} \end{array}~\hspace{5em}\stackrel{\textit{45\% of 261}}{\left( \cfrac{45}{100} \right)261}\implies \text{\LARGE 117.45}[/tex]

The Simple random sampling method is equivalent to a lottery system in which all the available names are placed in a container, the container is shaken, and the names of the "winners" or participants are then drawn out in an unbiased manner.

What is Simple random sampling?

The Simple random sampling is a sampling technique in which every member of the population has an equal chance of being chosen as a sample. The samples are chosen randomly, without any specific criterion. In this method, the selection of individuals for the sample is done without any specific pattern. This means that each member of the population is equally likely to be selected as a sample.In Simple random sampling, each member of the population is assigned a number, and the samples are selected using a random number generator or drawing names out of a hat. The selected samples are then analyzed to make predictions about the entire population.For example, if a researcher wanted to know the average age of students in a school, they might use Simple random sampling to choose a sample of 50 students. The researcher would assign each student a number and then use a random number generator to select the samples.There are some advantages and disadvantages of Simple random sampling, which are listed below:Advantages of Simple random sampling It is easy to understand and conduct the process.Each member of the population has an equal chance of being selected as a sample.It ensures that the sample is representative of the entire population.Disadvantages of Simple random sampling It can be time-consuming to select the samples.There may be a chance of human error when selecting samples.The sample size may not be large enough to draw meaningful conclusions.

For more questions on random sampling

https://brainly.com/question/9910540

#SPJ11

Answer:

Step-by-step explanation:

100 students all together.

50+70=120....so 20 must like both.

When the function d(x) = -x +(-3), then the value of d(0) is -3

In mathematics, a function is a relationship between two sets of numbers, called the domain and range. A function assigns each element of the domain to exactly one element of the range.

In the given problem, we are given a function d(x)=-x-3. The notation d(0) represents the value of the function d(x) when x = 0.

To find d(0), we need to substitute x = 0 in the function d(x)=-x-3, which gives:

d(0) = -(0) - 3

The first term -(0) is equal to zero, and the second term -3 is a constant value that remains the same regardless of the value of x. Therefore, we can simplify the expression as

d(0) = -3

Learn more about function here

brainly.com/question/12431044

#SPJ4

The coordinates of the point P is (-1,2) .

What is translation?

In mathematics, a translation is a geometric transformation that moves every point of a figure or a space by the same amount in a given direction. The amount and direction of the movement can be described using a vector, which is a mathematical object that has both magnitude and direction.

Finding the coordinates of the point P :

The coordinates of point P can be found by subtracting the vector from point Q.

To find the coordinates of point P, we need to subtract the vector [tex]\begin{pmatrix}4\\-3\end{pmatrix}[/tex] from the coordinates of point Q, which are (3, -1).

Subtracting the x-coordinate of the vector from the x-coordinate of point Q gives us:

3 - 4 = -1

Similarly, subtracting the y-coordinate of the vector from the y-coordinate of point Q gives us:

-1 - (-3) = 2

Therefore, the coordinates of point P are (-1, 2).

So, the correct answer is (C) (-1, 2).

To know more about coordinates visit :

brainly.com/question/16634867

#SPJ1

The conclude that the Y1 and Y2 are not independent.

The joint probability density function for the random variables Y1 and Y2 for a mixture of insecticide isf(y1,y2)={2,0,0≤y1≤1,0≤y2≤1,0≤y1+y2≤1 elsewhereTo verify if the Y1 and Y2 are independent, we need to check if f(y1,y2) is equal to the product of the marginal probabilities of Y1 and Y2.Therefore, we need to find the marginal density functions of Y1 and Y2.Probability Density Function:We know that for a given joint probability density function, the probability density function of Y1 is given by integrating over all possible values of Y2, and vice versa.Mathematically,P(Y1)=∫0∫1f(y1,y2)dy2... (1)P(Y2)=∫0∫1f(y1,y2)dy1... (2)Using equation (1) to calculate P(Y1), we get,  P(Y1)=∫0∫1f(y1,y2)dy2=∫0∫1(2)dy2=2... (3)Similarly, we can use equation (2) to calculate P(Y2) as follows:P(Y2)=∫0∫1f(y1,y2)dy1=∫0∫1(2)dy1=2... (4)Product of marginal density functions:Now we can find the product of marginal density functions as follows:P(Y1)P(Y2)=2×2=4... (5)Thus, to verify if the Y1 and Y2 are independent, we need to check if f(y1,y2) is equal to the product of the marginal probabilities of Y1 and Y2.Since 2 ≠ 4, Y1 and Y2 are not independent. Hence, we can conclude that the Y1 and Y2 are not independent.

Learn more about Conclude

brainly.com/question/2711657

#SPJ11

Answer: Yes Sofia will have enough money

=======================================================

Explanation:

Refer to the drawing below. I've split the hexagon into two pieces. The bottom is a rectangle and the top is a trapezoid.

The area of the rectangle is 16*7 = 112 square meters.

The trapezoid has 16 as one of the parallel sides. The other side is x meters. We'll use the perimeter 54 to determine what x must be

sum of the exterior sides = perimeter

6+7+16+7+6+x = 54

42+x = 54

x = 54-42

x = 12

The top most side is 12 meters. This is the missing side of the trapezoid. The hexagon has a height of 12.66 meters, so the trapezoid's height must be 12.66-7 = 5.66 meters. Refer to the blue segment I marked in the drawing below.

area of the trapezoid = 0.5*height*(base1+base2)

area = 0.5*5.66*(16+12)

area = 79.24 square meters

----------------

Recap so far

The total area of the entire hexagon is therefore 112+79.24 = 191.24 square meters.

Let's convert that to square decimeters.

Recall that 1 decimeter = 10 centimeters

Multiply both sides by 10

1 decimeter = 10 centimeters

10*(1 decimeter) = 10*(10 centimeters)

10 decimeters = 100 centimeters

10 decimeters = 1 meter

Then,

[tex]191.24 \text{ sq m}= 191.24 \text{ sq m} * \frac{10 \text{ dm}}{1 \text{ m}} * \frac{10 \text{ dm}}{1 \text{ m}}\\\\= \frac{191.24*10*10}{1*1} \text{ sq dm}\\\\= 19124 \text{ sq dm}\\\\[/tex]

The entire lawn is 19124 square decimeters.

----------------

We have one final block of calculations to determine the total price.

x = number of rolls

1 roll covers 90 square decimeters

x rolls cover 90x square decimeters

90x = 19124

x = 19124/90

x = 212.489 approximately

Round up to the nearest integer to get x = 213. It doesn't matter that 212.489 is closer to 212. We round up to clear the hurdle. It means we'll have leftover grass that isn't used (perhaps it could be handy to have some back up grass just in case mistakes are made, and some patches need to be redone).

In short, Sofia needs 213 rolls.

1 roll costs $4.50

213 rolls will cost 213*4.50 = 958.50 dollars.

This is under the $1000 threshold (with 1000-958.50 = 41.50 dollars to spare).

Sofia will have enough money to pay for all of the grass.

Answer:

15/x * 100 %

Step-by-step explanation:

Since we don't know the total, we have 15/x * 100 % as the percent of how many people passed the test. (x is amount of people, 15 or greater.)

Answer:28

Step-by-step explanation:

Answer: 28

Explanation:  Look for a pattern or reason for the following number in the sequence. In this case 3+1=4, 4+3=7, 7+5=12, 12+7=19, so the probable answer is to add the following odd number to the last one in the line to get the next. (19+9=28)

Answer: 6.75

Step-by-step explanation:

45 x 0.15= 6.75

the statement "A Triangle with side lengths 20,21, and 28 is a right triangle" is invalidated.

As, You may simply rule out the first three options if you are familiar with specific Pythagorean triples and other triangle relationships.

Pythagorean triples consist of the three positive numbers a, b, and c, where a2+b2 = c2. The symbols for these triples are (a,b,c). Here, a represents the right-angled triangle's hypotenuse, b its base, and c its perpendicular. The smallest and most important triplets are (3,4,5).

So,

20² +21² = 400 +441 = 841 = 29²

The appropriate choice is  20, 21, and 29

To know more about Pythagorean triples, click the below link

https://brainly.com/question/15190643

#SPJ4

The residual if the room temperature was 25°C and the cupric chloride had an etching rate of 5 μm/min is equals to the -2 μm/min.

The residual for each observation in statistics is the difference between predicted values of y (dependent variable) and observed values of y. That is Residual= observed y value − predicted y.

Here, cupric chloride is used to etch circuit boards. The linear regression equation is, y = 2 + (1/5)x

where, x = temperature in °C

y = etching rate in μm/min

Observed value of etching rate of cupric chloride = 5 μm/min for 25°C

To determine the estimated or predicted value of etching rate of cupric chloride, we substite x = 25, in the above linear equation, y = 2 + (1/5)x

=> y = 2 + (1/5)× 25

=> y = 7

So, Predicted Value = 7 μm/min

Observed Value = 5 μm/min.

Residual = Observed Value - Predicted

= 5 - 7 = -2

Hence, required value is -2 μm/min.

For more information about residual, visit

https://brainly.com/question/30675733

#SPJ4

Complete question:

Calculating and interpreting residuals You might need: Calculator Alexander uses cupric chloride to etch circuit boards. He recorded the room temperature, in °C, and the etching rate, in μm/min of the cupric chloride. After plotting his results, Alexander noticed that the relationship between the two variables was fairly linear, so he used the data to calculate the following least squares regression equation for predicting the etching rate from the room temperature: y = 2 + 5/x, What is the residual if the room temperature was 25°C and the cupric chloride had an etching rate of 5 μm/min. ? Show Calculator

The last two rows of the table should be completed as follows:

Input   Output

8       22.80

10      28.50

An algebraic expression is a mathematical phrase that contains numbers, variables, and operations. It is used to represent a single quantity or value, and can be written in terms of one or more variables.

The rule given is an algebraic expression, x, which is the input, multiplied by 2.85, which is the output. Using this information, we can determine the cost of 10 muffins.

To find the cost of 10 muffins, we can use the algebraic expression given. First, we will multiply 10, the number of muffins, by 2.85, the cost of one muffin. This gives us a total of 28.50. Therefore, the cost of 10 muffins is 28.50.

Using this same rule and process, we can also determine the cost of any number of muffins. For example, if we want to know the cost of 15 muffins, we can simply multiply 15 by 2.85, giving us a total of 42.75.

For more questions related to numbers

https://brainly.com/question/24644930

#SPJ1

The radius of the given circle is x = 3 and x = 3/11.

A polynomial equation of degree two is a quadratic equation, indicating that the variable's maximum exponent is 2. There are various ways to solve a quadratic equation, including factoring, completing the square, and applying the quadratic formula. Finding two quadratic expression factors that multiply to produce the constant term c and add to produce the linear term b's coefficient is known as factoring. The quadratic expression is completed by adding and removing a constant component to create a perfect square trinomial that can be factored or solved by calculating the square root.

In the given figure connect the points QF and QG using a line segment, thus forming two right angled triangle.

The perpendicular segment QA divides the base into two equal parts. Thus, the base of the triangle is 8.

Using the Pythagorean theorem we have:

(QF)² = (8)² + (4x + 3)²

QG² = 8² + (7x - 6)²

In the figure QF = QG = r thus:

(8)² + (4x + 3)² = 8² + (7x - 6)²

Expanding using the algebraic identity:

16x² + 24x + 9 = 49x² - 84x + 36

33x² - 108x + 27 = 0

3(11x² - 36x + 9) = 0

Using the quadratic formula:

x = (-b ± √(b² - 4ac)) / 2a

Substitute the values a = 11, b = -36, and c = 9:

x = (-(-36) ± √((-36)² - 4(11)(9))) / 2(11)

x = (36 ± √(1296 - 396)) / 22

x = (36 ± √900) / 22

x = (36 ± 30) / 22

x = (36 + 30) / 22 = 3

x = (36 - 30) / 22 = 3/11

x = 3 and x = 3/11.

Thus, the radius of the given circle is x = 3 and x = 3/11.

Learn more about radius here:

https://brainly.com/question/13449316

#SPJ1

The true statement is, Parameter values can be used within the method code block. (option e).

In computer programming, methods are used to group a set of instructions together that can be executed repeatedly. Parameters are used to pass values to a method so that the method can perform specific actions based on the values passed. Let's discuss the given statements one by one to determine which ones are true.

Parameter values can be used within the method code block.

This statement is true. Parameter values can be used within the method code block to perform specific actions. The parameter values can be manipulated or combined with other values to produce the desired result.

In summary, methods can be written with any number of parameters, and parameter values can be used within the method code block to perform specific actions. The number of parameters needed will depend on the specific task the method is designed to perform.

Hence the option (e) is correct.

To know more about parameter here

https://brainly.com/question/30757464

#SPJ4

Answer:

If the tires on Mavis’ car have to be replaced when they each have 160 000 km of wear, then the total distance Mavis can drive on a set of tires is:

4 tires * 160,000 km = 640,000 km

If Mavis drives 25,000 km in a year, she will need to replace her tires after:

640,000 km ÷ 25,000 km/year = 25.6 years

Since Mavis will need to replace her tires once every 25.6 years, the cost of the wear on her tires for a single year is:

$140.00/tire * 4 tires = $560.00

So the total cost of the wear on Mavis’ tires for a year in which she drives 25,000 km is $560.00.

Step-by-step explanation:

source: trust me bro

The null hypothesis and alternative hypothesis in the notation for the individual t-test for testing the slope coefficient associated with a simple linear regression are given below:

Null hypothesis: H₀: β₁ = 0

Alternative hypothesis: Hₐ : β₁ ≠ 0

The hypothesis test is used to determine whether or not there is sufficient evidence to support the alternative hypothesis that the slope of the regression line is not equal to zero. The null hypothesis is that the slope of the regression line is equal to zero.

Therefore, we will use the individual t-test for the slope coefficient to test the hypothesis regarding the slope of the regression line. The formula for the t-test for the slope coefficient is given below:

t = (b₁– β₁) / SEb₁

Where b₁ is the sample slope coefficient β₁ is the hypothesized value of the slope coefficient (i.e., 0) SEb₁ is the standard error of the slope coefficient.

To know more about the "null hypothesis and alternative hypothesis": https://brainly.com/question/25263462

#SPJ11

According to the question the value of the 5 digit in 4,597 is 9.

Digit is a numerical symbol used to represent numbers in the decimal system. It is a single symbol used to represent a number ranging from 0 to 9. Digits are used to represent numbers in all forms of mathematical calculations and equations. The most common digits used in calculations are 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9. Each digit has an associated numerical value, which can be used to create larger numbers or to perform complex mathematical operations.

The answer is D) 9. The value of the 5 digit in 4,597 is 5. To find the 10 times its value, you must multiply 5 by 10, which equals 50. Therefore, the value of the 5 digit in 4,597 is 9.

To learn more about digit
https://brainly.com/question/26856218
#SPJ1

Answer:

(fog)(x) = 726x^2 + 924x + 295, and (fog)(-3) = 6,817.

Answer:

the value of x is approximately 0.382 cm.

Step-by-step explanation:

The dimensions of the triangle with maximum area are a base of 11 cm and a height of 11 cm.

We are given that the sum of the base and height of a triangle is 22 cm. Let's call the base of the triangle "b" and the height "h". Then we have the equation:

b + h = 22

We want to find the dimensions of the triangle that will give us the maximum area.

The formula for the area of a triangle is A = (1/2)bh.

We can use the equation b + h = 22 to solve for one of the variables in terms of the other.

we can solve for h:

h = 22 - b

Substituting this into the formula for the area, we get:

A = (1/2)b(22 - b)

The equation 0 = 11b - (1/2)b² can be rearranged to:

(1/2)b² - 11b = 0

We can then use the quadratic formula to solve for "b"

b = 11 ± 11

So the value of b that gives us the maximum area is b = 11 cm. Substituting this back into the equation h = 22 - b, we get:

h = 22 - 11 = 11 cm

Triangle has a base of 11 cm and a height of 11 cm.

To practice more questions about area of triangle:

https://brainly.com/question/21735282

#SPJ11

The relationship between distance and travel time. It is not excessively strong or weak. In other words, the rate of change in journey time is moderate and constant with respect to distance.

positive negative moderate weak linear nonlinear relationship between distance and travel time can be described as follows:•

           Positive• Linear• Moderate

   Explain as we move from point A to point B, the distance covered and the travel time it takes to get there are positively correlated. As the distance increases, the travel time required to reach the destination also increases, resulting in a positive correlation.

          The relationship between distance and travel time is linear because the rate at which distance is covered remains constant, resulting in a straight-line relationship on a graph. It means that if distance doubles, the travel time will also double, indicating a linear relationship.

Hence, the linear relationship is also referred to as a direct relationship. On a graph, the line that represents the relationship between distance and travel time is moderate. This implies that the slope of the line is neither too steep nor too gentle.

               Thus, it is neither too strong nor too weak. In other words, the rate of change in travel time is consistent as distance changes, making it moderate.

To learn more about the relationship between distance and travel time: https://brainly.com/question/17146782

#SPJ11

P(0 received correctly) = P(0 sent) × P(0 received correctly | 0 sent)= [tex](2/3) × 0.8= 0.5333[/tex] (rounded to 1 decimal place)Thus, the probability that a 0 is received is 0.5333 (rounded to 1 decimal place).

0.5333

A space probe near Neptune communicates with Earth using bit strings. Suppose that in its transmissions it sends a 1 one-third of the time and a 0 two-thirds of the time. When a 0 is sent, the probability that it is received correctly is 0.8 and the probability that it is received incorrectly (as a 1) is 0.2. When a 1 is sent the probability that it is received correctly is 0.8 and the probability that it is received incorrectly (as a 0) is 0.2.The probability that a 0 is received correctly is given in the problem as 0.8, and the probability that a 0 is sent is 2/3. Therefore, the probability that a 0 is received correctly

for such more questions on probability

https://brainly.com/question/13604758

#SPJ11

Step-by-step explanation:

5x - 30 = 3x

2x = 30

x = 15

that's the answer

By using the formula of a geometric sequence, the 14th term will be 125/1024

We have, the Fourth term of geometric sequence T_4= 125 and T_10 = 125/64

Let's find the first term and common ratio of the geometric sequence.

Using the formula of the nth term of a geometric sequence, we get,

T_4 = a * r^3 = 125 ....(1)

and,

T_10 = a * r^9 = 125/64 ...(2)

On dividing eq. (2) by eq. (1), we get,

(r^6) = (125/64) / 125 ⇒ 1/64

Taking the sixth root of both sides, we get:

r = (1/64)^(1/6)

r = 1/2

Now that we know the common ratio, we can use the equation for the nth term of a geometric sequence:

T_n = a * r^(n-1)

To find the 14th term, we substitute n=14 and solve:

T_14 = a * (1/2)^(14-1) ⇒ a * (1/2)^13

We don't know the value of a yet, but we can use the fact that the 4th term is 125 to solve for it:

a * r^3 = 125

a * (1/2)^3 = 125

a = 125 * 2^3

a = 1000

Substituting this value for a, we get:

T_14 = 1000 * (1/2)^13

T_14 = 1000 * 1/8192

T_14= 125/1024

Therefore, the 14th term of the geometric sequence is 125/1024.

To know more about the "geometric sequence": https://brainly.com/question/24643676

#SPJ11

The expression that is equivalent to (4 - 2x)(4 + 2x) is equal to 16 - 4x^2 approximately.

To simplify the expression (4 - 2x)(4 + 2x), we can use the FOIL method, which stands for First, Outer, Inner, Last. This method involves multiplying each term in the first factor by each term in the second factor and then combining like terms.

Using the FOIL method, we get:

(4 - 2x)(4 + 2x) = 4 × 4 + 4 × 2x - 2x × 4 - 2x × 2x

Simplifying the expression, we get:

16 + 8x - 8x - 4x^2

The two middle terms cancel each other out, leaving us with:

16 - 4x^2

We can also check our answer by factoring the simplified expression back to the original expression. If we factor 16 - 4x^2, we get:

16 - 4x^2 = 4(4 - x^2)

We can then use the difference of squares formula, which states that a^2 - b^2 = (a + b)(a - b), to factor further:

4(4 - x^2) = 4(2 + x)(2 - x)

This gives us back the original expression, (4 - 2x)(4 + 2x), confirming that 16 - 4x^2 is equivalent to (4 - 2x)(4 + 2x).

To learn more about expression click on,

https://brainly.com/question/30190910

#SPJ4