Therefore, the slope of the line passing through the points (0,5) and (2,0) is -5/2.
What is slope?In mathematics, slope refers to the measure of steepness of a line. It is the ratio of the change in y (vertical change) over the change in x (horizontal change) between any two points on the line. The slope of a line is represented by the letter "m" and can be calculated using the slope formula: m = (y2 - y1) / (x2 - x1) where (x1, y1) and (x2, y2) are the coordinates of two points on the line.
Here,
To find the slope of a line, we use the formula:
slope = (y2 - y1) / (x2 - x1)
where (x1, y1) and (x2, y2) are any two points on the line.
Using the given coordinates, we have:
x1 = 0, y1 = 5
x2 = 2, y2 = 0
slope = (0 - 5) / (2 - 0)
slope = -5/2
To know more about slope,
https://brainly.com/question/29184253
#SPJ1
Find the total amount and total interest after six months if the interest is compounded every quarter. Principal =₹10 000 Rate of interest =20% per annum.
Answer:I=(PxRxT)/100
I=(10000x20x1)/100x2
I=200000/200
I=1000
Step-by-step explanation:
suppose you start at the origin, move along the x-axis a distance of 7 units in the positive direction, and then move downward a distance of 6 units. what are the coordinates of your position? (x, y, z)
The coordinates of your position If we start at the origin, we are moving only along the x-axis of a distance of 7 units in positive direction and then only in the negative y-axis direction and z-coordinate is zero are (7,-6,0).
The origin is the point in space that has a position of (0, 0, 0), which represents the point where the x, y, and z axes intersect.
The first step is to move 7 units in the positive x direction. The positive x direction is the direction in which x values increase. Therefore, we move to the right along the x-axis to the point (7, 0). This means that we have moved 7 units along the x-axis, and our position is now (7, 0, 0).
The second step is to move downward a distance of 6 units. Since we are not moving in the x direction, we are only changing our position along the y-axis. Moving downward in the y direction means decreasing our y-coordinate. Therefore, we move 6 units downward from our current position to the point (7, -6, 0).
Therefore, the coordinates of our position are (7, -6, 0)
To practice more question about 'co-ordinates':
https://brainly.com/question/17206319
#SPJ11
Guidance Missile System A missile guidance system has seven fail-safe components. The probability of each failing is 0.2. Assume the variable is binomial. Find the following probabilities. Do not round intermediate values. Round the final answer to three decimal places, Part: 0 / 4 Part 1 of 4 (a) Exactly two will fail. Plexactly two will fail) = Part: 1/4 Part 2 of 4 (b) More than two will fail. P(more than two will fail) = Part: 214 Part: 2/4 Part 3 of 4 (c) All will fail. P(all will fail) = Part: 3/4 Part 4 of 4 (d) Compare the answers for parts a, b, and c, and explain why these results are reasonable. Since the probability of each event becomes less likely, the probabilities become (Choose one smaller larger Х 5
The probability of all will fail is the lowest.
The given problem states that a missile guidance system has seven fail-safe components, and the probability of each failing is 0.2. The given variable is binomial. We need to find the following probabilities:
(a) Exactly two will fail.
(b) More than two will fail.
(c) All will fail.
(d) Compare the answers for parts a, b, and c, and explain why these results are reasonable.
(a) Exactly two will fail.
The probability of exactly two will fail is given by;
P(exactly two will fail) = (7C2) × (0.2)2 × (0.8)5
= 21 × 0.04 × 0.32768
= 0.2713
Therefore, the probability of exactly two will fail is 0.2713.
(b) More than two will fail.
The probability of more than two will fail is given by;
P(more than two will fail) = P(X > 2)
= 1 - P(X ≤ 2)
= 1 - (P(X = 0) + P(X = 1) + P(X = 2))
= 1 - [(7C0) × (0.2)0 × (0.8)7 + (7C1) × (0.2)1 × (0.8)6 + (7C2) × (0.2)2 × (0.8)5]
= 1 - (0.8)7 × [1 + 7 × 0.2 + 21 × (0.2)2]
= 1 - 0.2097152 × 3.848
= 0.1967
Therefore, the probability of more than two will fail is 0.1967.
(c) All will fail.
The probability of all will fail is given by;
P(all will fail) = P(X = 7) = (7C7) × (0.2)7 × (0.8)0
= 0.00002
Therefore, the probability of all will fail is 0.00002.
(d) Compare the answers for parts a, b, and c, and explain why these results are reasonable.
The probability of exactly two will fail is the highest probability, followed by the probability of more than two will fail. And, the probability of all will fail is the lowest probability. These results are reasonable since the more the number of components that fail, the less likely it is to happen. Therefore, it is reasonable that the probability of exactly two will fail is higher than the probability of more than two will fail, and the probability of all will fail is the lowest.
Learn more about Probability
brainly.com/question/23017717
#SPJ11
n+d=21
0.05n + 0.10d= 1.70
Answer:
To solve the system of equations:
n + d = 21 ---(1)
0.05n + 0.10d = 1.70 ---(2)
We can use the substitution method by solving for one variable in terms of the other from equation (1) and substituting it into equation (2).
Solving equation (1) for n:
n = 21 - d
Substituting this expression for n into equation (2):
0.05(21 - d) + 0.10d = 1.70
Distributing the 0.05:
1.05 - 0.05d + 0.10d = 1.70
Combining like terms:
0.05d = 0.65
Dividing both sides by 0.05:
d = 13
Substituting this value of d into equation (1):
n + 13 = 21
Solving for n:
n = 8
Therefore, the solution to the system of equations is n = 8 and d = 13.
LetR=[0, 4]×[−1, 2]R=[0, 4]×[−1, 2]. Create a Riemann sum by subdividing [0, 4][0, 4] into m=2m=2 intervals, and [−1, 2][−1, 2] into n=3n=3 subintervals then use it to estimate the value of ∬R (3−xy2) dA∬R (3−xy2) dA.Take the sample points to be the upper left corner of each rectangle
The Riemann sum is:Σ(3-xᵢₖ*yᵢₖ²)ΔA, where i=1,2 and k=1,2,3.
We can create a Riemann sum to estimate the value of the double integral ∬R (3-xy²) dA over the rectangular region R=[0, 4]×[-1, 2] by subdividing [0, 4] into m=2 intervals and [-1, 2] into n=3 intervals. Then we can evaluate the function at the upper left corner of each subrectangle, multiply by the area of the rectangle, and sum all the results.
The width of each subinterval in the x-direction is Δx=(4-0)/2=2, and the width of each subinterval in the y-direction is Δy=(2-(-1))/3=1. The area of each subrectangle is ΔA=ΔxΔy=2*1=2.
Therefore, the Riemann sum is:
Σ(3-xᵢₖ*yᵢₖ²)ΔA, where i=1,2 and k=1,2,3.
Evaluating the function at the upper left corner of each subrectangle, we get:
(3-0*(-1)²)2 + (3-20²)2 + (3-21²)2 + (3-41²)*2 = 2 + 6 + 2 + (-22) = -12.
Thus, the estimate for the double integral is -12.
For more questions like Riemann click the link below:
https://brainly.com/question/30404402
#SPJ11
Find the distance between each pair of points.
a. M= (0,-11) and P=(0,2)
b. A= (0,0) and B= (-3,-4)
c. C= (8,0) and D=(0,-6)
Answer:
To calculate the distance between each pair of points given, we can use the distance formula which is derived from the Pythagorean theorem. The formula is:
distance = square root of [(x2 - x1)^2 + (y2 - y1)^2]
Using this formula, we can calculate the following distances:
a. Distance between M and P = 13 units
b. Distance between A and B = 5 units
c. Distance between C and D = 10 units
an inner city revitalization zone is a rectangle that is twice as long as it is wide. the width of the region is growing at a rate of 32 m per year at a time when the region is 220 m wide. how fast is the area changing at that point in time?
The area is changing at a rate of 28,160 m²/year at that point in time.
The area of the rectangular region is given by:
A = lw
Where l is the length of the rectangular region and w is the width of the rectangular region.
The width of the rectangular region is given to be 220 m. Therefore, we have the width w = 220 m. The length l of the rectangular region can be found knowing that it is twice as long as it is wide. Therefore, the length of the rectangular region is given by:
l = 2w
l = 2 x 220
l = 440
Therefore, the length l of the rectangular region is 440 m.
At the given point in time, the width of the rectangular region is growing at a rate of 32 m per year. Therefore, we have the rate of change of the width dw/dt to be 32 m per year. We need to find how fast the area of the rectangular region is changing at that point in time. Therefore, we need to find the rate of change of the area of the rectangular region dA/dt.
A = lw
dA/dt = w dl/dt + l dw/dt
dA/dt = 220 d/dt(2w) + 440 dw/dt
dA/dt = 220 x 2 dw/dt + 440 dw/dt
dA/dt = 880 dw/dt
Substitute the value of dw/dt to get:
dA/dt = 880 x 32
dA/dt = 28,160 m²/year
Therefore, the area of the rectangular region has a rate of change of 28,160 m² per year at that point in time.
Learn more about rate of change here: https://brainly.com/question/29504549
#SPJ11
How do you do this I need help please
Answer:
30,000 grams
Step-by-step explanation:
multiply the 30KG by 1,000 (that is the conversion) and you get 30,000g
Answer:
hi I'm really sorry I can't help
Will make you brainlist!
Answer:
x = -2 , y = 2
Step-by-step explanation:
label your equations (1) and (2) the question mention to use elimination method and make x the same for both. To do that multiply equation (1) by 2. than label it (3)so 3x becomes 6x adding the equation (2)+(3) cancels out -6x and 6x so you can find value of yuse value of y to find xhope this helps :)
One number is 13 less than another number. Let x represent the greater number. What is the sum of these two numbers?
Answer:
2x - 13
Step-by-step explanation:
If x represents the greater number, then the other number is x - 13. The sum of these two numbers is:
x + (x - 13) = 2x - 13
what is the value of y in the solution to the system of equations below.
y=-x+6
2x-y=-9
Answer:
I gave a couple solutions as I wasn't sure if you were asking for graphing purposes or substituting y=-x+6 into the second equation 2x-y=-9. So I gave both solutions just in case.
for the first equation y=-x+6, y intercept is (0,6)
for equation two 2x-y=-9, y intercept is (0,9)
In both of the equations the x value is 1.
Solving for y without graphing. Y=9+2x
and x=-1
Step-by-step explanation:substitute i
HOWEVER, if you are saying that the top equation is the value of y, then you substitute it into the bottom equation. 2x--x+6=-9 which would be x=-5
It really depends on what is expected of the question. I wasn't sure which one, so I gave a couple different approaches. If you could give more information, such as, are you graphing, that would be great. I'll keep an eye out for any comments.
I NEED ANSWERS ASAP….
Answer:
Step-by-step explanation:
It is set up
7x+5x+2y=20
7x+5x=12x
12x+2y=20
x=0
y=10
12(0)+2(10)=20
Ok so maybe this was not the same type of equation i thought it was it is not that easy!
A student takes a multiple-choice test that has 10 questions. Each question has four choices. The student guesses randomly at each answer. Round the answers to three decimal places Part 1 of2 (a) Find P(5) P(5)- Part 2 of2 (b) Find P(More than 3) P(More than 3)
A student attempts a 10-question multiple-choice test where each question presents four options, and the student makes random guesses for each answer. So the probability of (a) P(5)= 0.058 and (b) P(More than 3)= 0.093.
Part 1: Calculation of probability of getting 5 questions correct
(a) P(5)The formula used to find the probability of getting a certain number of questions correct is:
P(k) = (nCk)pk(q(n−k))
Where, n = total number of questions
(10)k = number of questions that are answered correctly
p = probability of getting any question right = 1/4
q = probability of getting any question wrong = 3/4
P(5) = P(k = 5) = (10C5)(1/4)5(3/4)5= 252 × 0.0009765625 × 0.2373046875≈ 0.058
Part 2: Calculation of probability of getting more than 3 questions correct
(b) P(More than 3) = P(k > 3) = P(k = 4) + P(k = 5) + P(k = 6) + P(k = 7) + P(k = 8) + P(k = 9) + P(k = 10)
P(k = 4) = [tex]10\choose4[/tex](1/4)4(3/4)6 = 210 × 0.00390625 × 0.31640625 ≈ 0.02
P(k = 5) = [tex]10\choose5[/tex](1/4)5(3/4)5 = 252 × 0.0009765625 × 0.2373046875 ≈ 0.058
P(k = 6) = [tex]10\choose6[/tex](1/4)6(3/4)4 = 210 × 0.0002441406 × 0.31640625 ≈ 0.012
P(k = 7) = [tex]10\choose7[/tex](1/4)7(3/4)3 = 120 × 0.00006103516 × 0.421875 ≈ 0.002
P(k = 8) = [tex]10\choose8[/tex](1/4)8(3/4)2 = 45 × 0.00001525878 × 0.5625 ≈ 0.001
P(k = 9) = [tex]10\choose9[/tex](1/4)9(3/4)1 = 10 × 0.000003814697 × 0.75 ≈ 0.000
P(k = 10) = [tex]10\choose10[/tex](1/4)10(3/4)0 = 1 × 0.0000009536743 × 1 ≈ 0
P(More than 3) = 0.020 + 0.058 + 0.012 + 0.002 + 0.001 + 0.000 + 0≈ 0.093
Therefore, the probabilities of the given situations are: P(5) ≈ 0.058, P(More than 3) ≈ 0.093.
To know more about probability: https://brainly.com/question/251701
#SPJ11
The 1948 and 2018 temperatures at 197 random locations across the globe were compared and the mean difference for the number of days above 90 degrees was found to be 2.9 days with a standard deviation of 17.2 days. The difference in days at each location was found by subtracting 1948 days above 90 degrees from 2018 days above 90 degrees.
What is the lower limit of a 90% confidence interval for the average difference in number of days the temperature was above 90 degrees between 1948 and 2018?
What is the upper limit of a 90% confidence interval for the average difference in number of days the temperature was above 90 degrees between 1948 and 2018?
What is the margin of error for the 90% confidence interval?
Does the 90% confidence interval provide evidence that number of 90 degree days increased globally comparing 1948 to 2018?
Does the 99% confidence interval provide evidence that number of 90 degree days increased globally comparing 1948 to 2018?
If the mean difference and standard deviation stays relatively constant would decreasing the degrees of freedom make it easier or harder to conclude that there are more days above 90 degrees in 2018 versus 1948 globally.
If the mean difference and standard deviation stays relatively constant does lowering the confidence level make it easier or harder to conclude that there are more days above 90 degrees in 2018 versus 1948 globally.
The lower limit of a 90% confidence interval for the average difference in the number of days the temperature was above 90 degrees between 1948 and 2018 is -22.8 days and the upper limit is 28.6 days.
The margin of error for the 90% confidence interval is 25.4 days.
The 90% confidence interval does provide evidence that the number of 90-degree days increased globally comparing 1948 to 2018.
The 99% confidence interval also provides evidence that the number of 90-degree days increased globally comparing 1948 to 2018.
If the mean difference and standard deviation stay relatively constant, decreasing the degrees of freedom would make it harder to conclude that there are more days above 90 degrees in 2018 versus 1948 globally.
Lowering the confidence level would also make it harder to conclude that there are more days above 90 degrees in 2018 versus 1948 globally.
To learn more about “standard deviation” refer to the https://brainly.com/question/475676
#SPJ11
A straw that is 15cm long leans against the inside of a glass. The diameter of a glass is
5cm, and has a height of 8cm. How far past the edge of the glass would the straw extend?
Round your answer to the nearest tenth.
The straw will extend past the edge of the glass in a straight line. To find the answer, subtract the diameter of the glass (5cm) from the length of the straw (15 cm): 15 cm - 5 cm = 10 cm. This is the distance the straw will extend past the edge of the glass. To round to the nearest tenth, round 10.0 up to 10.1. Therefore, the straw will extend past the edge of the glass 10.1 cm.
Use the following function to find d(0)
d(x)=-x+-3
d(0)=
Answer:
d(0) = -3
Step-by-step explanation:
d(x) = -x + -3 d(0)
d(0) = 0 - 3
d(0) = -3
So, the answer is d(0) = -3
The ratio between two supplementary angle is 13:7. What are the measures of the angles?
Answer: The two angles are 117 degrees and 63 degrees.
Step-by-step explanation:
Supplementary angles are two angles whose sum is 180 degrees. Let the two angles be 13x and 7x, where x is a constant of proportionality.
We know that the sum of the angles is 180 degrees, so:
13x + 7x = 180
Combining like terms, we get:
20x = 180
Dividing both sides by 20, we get:
x = 9
So the measures of the angles are:
13x = 13(9) = 117 degrees
7x = 7(9) = 63 degrees
Therefore, the two angles are 117 degrees and 63 degrees.
Complete the recursive formula of the arithmetic sequence -16, -33, -50, -67,. −16,−33,−50,−67,. Minus, 16, comma, minus, 33, comma, minus, 50, comma, minus, 67, comma, point, point, point. C(1)=c(1)=c, left parenthesis, 1, right parenthesis, equals
c(n)=c(n-1)+c(n)=c(n−1)+c, left parenthesis, n, right parenthesis, equals, c, left parenthesis, n, minus, 1, right parenthesis, plus
The following is the recursive formula for the arithmetic sequence in this issue:
c(1) = -16.
c(n) = c(n - 1) - 17.
An arithmetic sequence is a series of numbers where each term is obtained by adding a fixed constant, known as the common difference, to the previous term. For example, in the sequence 2, 5, 8, 11, 14, 17, each term is obtained by adding 3 to the previous term.
The formula for finding the nth term of an arithmetic sequence is: a(n) = a(1) + (n-1)d, where a(1) is the first term, d is the common difference, and n is the term number. For example, to find the 10th term of the sequence 2, 5, 8, 11, 14, 17, we would use the formula a(10) = 2 + (10-1)3 = 29. Arithmetic sequences have many practical applications, such as in finance, where they can be used to calculate the interest earned on an investment over time.
To learn more about Arithmetic sequence visit here:
brainly.com/question/12108818
#SPJ4
a data set consists of the data given below plus one more data point. when the additional point is included in the data set the sample mean of the resulting data set is 32.083. what is the value of the additional data point?
The value of the additional data point is [tex]$19.17$[/tex].
What is the value of the additional data point?Let us first find the mean of the given data:
[tex]Mean = \frac{\sum_{i=1}^{n} x_i}{n}=\frac{39 + 45 + 43 + 42 + 44}{5}= 42.6[/tex]
Now let's find the value of the additional data point. Let the value of the additional data point be x. Therefore, the new sum of data is
[tex]$(39+45+43+42+44+x)$[/tex].
Total numbers of data are 6 (five given in the set and one additional data point).So, the mean of the resulting data set is given by:
[tex]32.083 = \frac{(39+45+43+42+44+x)}{6}[/tex]
Multiplying both sides of the equation by 6 we get:
[tex]6 \times 32.083 = (39+45+43+42+44+x)[/tex]
We have the value of [tex]$39+45+43+42+44$[/tex] which is [tex]$213$[/tex].
Therefore, substituting all the values, we get:
[tex]193.83 + x = 213[/tex]
On subtracting [tex]$193.83$[/tex] from both sides, we get the value of
[tex]x. x = 213 - 193.83 = 19.17[/tex]
Therefore, the value of the additional data point is [tex]$19.17$[/tex]
See more about sample mean at: https://brainly.com/question/29441200
#SPJ11
3
The ratio of desktop computers to laptop computers sold by
a mail-order company last week was 8 to 3. What could be
the numbers of computers sold by the company last week?
A
B
C
D
448 desktops, 168 laptops
448 desktops, 165 laptops
440 desktops, 168 laptops
400 desktops, 165 laptops
using the ratio given, the number of computers could be sold by the company last week is: A. 448 desktops, 168 laptops.
How to Calculate Ratios?To find the actual numbers of desktop and laptop computers sold, we need to choose a common factor for the ratio 8:3.
Let's assume that the total number of computers sold is 33x (where x is a positive integer). Then, the ratio 8:3 corresponds to 8x desktops and 3x laptops. We can check which of the given options satisfies this condition:
A. 8x = 448, 3x = 168 --> This satisfies the condition, as 8:3 = 448:168
B. 8x = 448, 3x = 165 --> This does not satisfy the condition, as 8:3 is not equal to 448:165
C. 8x = 440, 3x = 168 --> This does not satisfy the condition, as 8:3 is not equal to 440:168
D. 8x = 400, 3x = 165 --> This does not satisfy the condition, as 8:3 is not equal to 400:165
Therefore, the answer is option A: 448 desktops and 168 laptops could be the numbers of computers sold by the company last week.
Learn more about ratios on:
https://brainly.com/question/29053563
#SPJ1
The interest rate of an auto
loan is 4%. Express this
number as a decimal.
Answer: 0.04
Step-by-step explanation:
In order to get 4% as a decimal, you must divide 4 by 100.
4/100 = 0.04
Thus, the answer to your question is 0.04
Calculate the amount of interest on $4,000. 00 for 4 years, compounding daily at 4. 5 % APR. From the Monthly Interest Table use $1. 197204 in interest for each $1. 00 invested
The amount of interest earned on $4,000.00 for 4 years, compounding daily at 4.5% APR, is $1,064.08.
To calculate the amount of interest on $4,000.00 for 4 years, compounding daily at 4.5% APR, we can use the formula for compound interest:
A = P(1 + r/n)^(nt)
where A is the final amount, P is the principal, r is the annual interest rate as a decimal, n is the number of times the interest is compounded per year, and t is the time in years.
In this case, we have P = $4,000.00, r = 0.045, n = 365 (since interest is compounded daily), and t = 4. Plugging these values into the formula, we get:
A = $4,000.00(1 + 0.045/365)^(365*4)
A = $4,000.00(1.0001234)^1460
A = $4,889.68
The final amount is $4,889.68, which means that the interest earned is:
Interest = $4,889.68 - $4,000.00 = $889.68
We are given that the monthly interest table shows that $1.197204 in interest is earned for each $1.00 invested. Therefore, to find the interest earned on $4,000.00, we can multiply the interest earned by the factor:
$1.197204 / $1.00 = 1.197204
Interest earned = $889.68 x 1.197204 = $1,064.08
To learn more about interest click on,
https://brainly.com/question/28895435
#SPJ4
What’s -9.1 times 3.75
Solve: 3√x-√9x-17 =1
The solution to the equation (3√x) - √(9x-17) = 1 is x = 9.
What is the solution to the given equation?Given the equation in the question (3√x) - √(9x-17) = 1.
To solve for x in the given equation:
(3√x) - √(9x-17) = 1
We can start by isolating the square root term on one side of the equation. Adding √(9x - 17) to both sides, we get:
(3√x) = √(9x - 17) + 1
Squaring both sides of the equation, we get:
(3√x)² = (√(9x - 17) + 1)²
9x = -16 + 2√(9x - 17) + 9x
Solve for 2√(9x - 17)
2√(9x - 17) = 16
36x - 68 = 256
Add 68 to both sides
36x - 68 + 68 = 256 + 68
36x = 324
x = 324/36
x = 9
Therefore, the solution is x = 9.
Learn more about square roots here: https://brainly.com/question/3120622
#SPJ1
Help please & thanks
The function f(t)=−5t^2+20t models the approximate height of an object t seconds after it is launched. Which of the following equations correctly shows the quadratic formula being used to determine the number of seconds it will take for the objects to be at a height of 18 feet after launch?
The equatiοn is [tex]t = (-20 \± \sqrt{(400 - 4(-5)(-18))}) / 2(-5)[/tex] tο sοlve fοr the time it takes fοr the οbject tο be at a height οf 18 feet.
What is trigοnοmetric equatiοns ?Trigοnοmetric equatiοns are equatiοns that invοlve trigοnοmetric functiοns such as sine, cοsine, tangent, etc. These equatiοns usually invοlve finding values οf the unknοwn angle(s) that satisfy the given equatiοn. They can be sοlved using algebraic techniques οr by using the prοperties οf trigοnοmetric functiοns.
Accοrding tο the given infοrmatiοn:
The given functiοn is [tex]f(t) = -5t^2 + 20t[/tex], which mοdels the height οf an οbject in feet as a functiοn οf time in secοnds.
Tο find the number οf secοnds it will take fοr the οbject tο be at a height οf 18 feet after launch, we need tο sοlve the equatiοn [tex]-5t^2 + 20t = 18[/tex].
Tο sοlve this quadratic equatiοn using the quadratic fοrmula, we first identify the values οf a, b, and c frοm the general fοrm οf a quadratic equatiοn, [tex]ax^2 + bx + c = 0[/tex].
In this case, a = -5, b = 20, and c = -18. Substituting these values intο the quadratic fοrmula, we get:
[tex]t = (-b\± \sqrt{(b^2 - 4ac)}) / 2a[/tex]
Plugging in the values οf a, b, and c, we get:
[tex]t = (-20 \± \sqrt{+(20^2 - 4(-5)(-18)})) / 2(-5)[/tex]
Simplifying this expressiοn, we get:
[tex]t = (-20 \± \sqrt{(400 - 360))} / (-10)[/tex]
[tex]t = (-20\± \sqrt{(40)}) / (-10)[/tex]
[tex]t = (-20 \± 2\sqrt{(10)}) / (-10)[/tex]
[tex]t = 2 \± 0.632[/tex]
Therefοre, the twο pοssible values οf t are:
t = 2 + 0.632 = 2.632 secοnds
t = 2 - 0.632 = 1.368 secοnds
Therefοre, the equatiοn that cοrrectly shοws the quadratic fοrmula being used tο determine the number οf secοnds it will take fοr the οbject tο be at a height οf 18 feet after launch is:
[tex]t = (-b\± \sqrt{(b^2 - 4ac)}) / 2a[/tex]
[tex]t = (-20 \± \sqrt{(20^2 - 4(-5)(-18))}) / 2(-5)[/tex]
[tex]t = (-20\± \sqrt{(40)}) / (-10)[/tex]
[tex]t = (-20 \± 2\sqrt{(10)}) / (-10)[/tex]
t = 2 ± 0.632
Therefοre, the equatiοn is [tex]t = (-20 \± \sqrt{(400 - 4(-5)(-18))}) / 2(-5)[/tex] tο sοlve fοr the time it takes fοr the οbject tο be at a height οf 18 feet.
To know more about trigonometric equations visit :
brainly.com/question/30710281
#SPJ1
1. An Estate dealer sells houses and makes a commission of GHc3750 for the first house sold. He
receives GHc500 increase in commission for each additional house sold. How many houses must
she sell to reach a total commission of GHc6500?
If an Estate dealer sells houses and makes a commission of GHc3750 for the first house sold and receives GHc500 increase in commission for each additional house sold, for reaching a total commission of GHc6500, she must have sold 6.5 houses.
How is the number of houses sold determined?The number of houses the estate dealer sold to reach a total commission of GHc6500 can be determined using the mathematical operations of subtraction, division, and addition.
The total commission received = GHc6,500
The commission for the first house = GHc3,750
The commission for the remaining houses sold = GHc2,750 (GHc6,500 - GHc3,750)
The commission for additional sale of each house = GHc500
The number of additional houses sold = 5.5 (GHc2,750/GHc500)
The total number of houses sold = 6.5 (5.5 + 1 or the first house)
Learn more about sales commissions at https://brainly.com/question/24951536.
#SPJ1
Smoothie Activity
6. Using the relative frequency table, create a segmented bar graph by employee type using technology or by hand. If using Excel technology the columns may need to be switched after inserting the chart. Click on the chart and the "Chart Design" ribbon will pop up. Then select "Switch Row/Column." (10 points)
By answering the presented question, we may conclude that I used the following procedures to produce this graph.
What is graphs?Mathematicians use graphs to visually display or chart facts or values in order to express them coherently. A graph point usually represents a connection between two or more items. A graph, a non-linear data structure, is made up of nodes (or vertices) and edges. Glue the nodes, also known as vertices, together. This graph contains vertices V=1, 2, 3, 5, and edges E=1, 2, 1, 3, 2, 4, and (2.5), (3.5). (4.5). Statistical graphs (bar graphs, pie graphs, line graphs, and so on) are graphical representations of exponential development. a logarithmic graph shaped like a triangle.
I used the following procedures to produce this graph:
I classified the personnel as full-time, part-time, and temporary.
I estimated the proportion of employees who assessed the company's work-life balance as "very good" or "excellent" for each employee category, as well as the percentage who rated it as "good" or "fair/poor."
I used the following procedures to produce this graph:
I classified the personnel as full-time, part-time, and temporary.
I estimated the proportion of employees who assessed the company's work-life balance as "very good" or "excellent" for each employee category, as well as the percentage who rated it as "good" or "fair/poor."
I made the segmented bar graph using these percentages.
The graph was made using Excel technology. You may make a similar graph with Excel or any other software that supports segmented bar graphs.
To know more about graphs visit:
https://brainly.com/question/11950136
#SPJ1
Please help it’s for tmr
Leo has a number of toy soldiers between 27 and 54. If you want to group them four by four, there are none left, seven by seven, 6 remain, five by five, 3 remain. How many toy soldiers are there?
The answer is 48 but I need step by step explanation
Hence, 28 toy soldiers are the correct answer.
In mathematics, how is a group defined?A group in mathematics is created by combining a set with a binary operation. For instance, a group is formed by a set of integers with an arithmetic operation and a group is also formed by a set of real numbers with a differential operator.
Let's refer to the quantity of toy soldiers as "x".
We are aware that x is within the range of 27 and 54 thanks to the problem.
x can be divided by 4 without any remainders.
The residual is 6 when x is divided by 7.
The leftover after dividing x by five is three.
These criteria allow us to construct an equation system and find x.
Firstly, we are aware that x can be divided by 4 without any residual. As a result, x needs to have a multiple of 4. We can phrase this as:
x = 4k, where k is some integer.
Secondly, we understand that the remaining is 6 when x is divided by 7. This can be stated as follows:
x ≡ 6 (mod 7)
This indicates that x is a multiple of 7 that is 6 more than. We can solve this problem by substituting x = 4k:
4k ≡ 6 (mod 7)
We can attempt several values of k until we discover one that makes sense for this equation in order to solve for k. We can enter k in to equation starting using k = 1, as follows:
4(1) ≡ 6 (mod 7)
4 ≡ 6 (mod 7)
It is not true; thus we need to attempt a next value for k. This procedure can be carried out repeatedly until the equation is satisfied for all values of k.
k = 2:
4(2) ≡ 6 (mod 7)
1 ≡ 6 (mod 7)
k = 3:
4(3) ≡ 6 (mod 7)
5 ≡ 6 (mod 7)
k = 4:
4(4) ≡ 6 (mod 7)
2 ≡ 6 (mod 7)
k = 5:
4(5) ≡ 6 (mod 7)
6 ≡ 6 (mod 7)
k = 6:
4(6) ≡ 6 (mod 7)
3 ≡ 6 (mod 7)
k = 7:
4(7) ≡ 6 (mod 7)
0 ≡ 6 (mod 7)
We have discovered that the equation 4k 6 (mod 7) is fulfilled when k = 7. Thus, we can change k = 7 to x = 4k to determine that:
x = 4(7) = 28
This indicates that there are 28 toy troops. Yet we also understand that the leftover is 3 when x is divided by 5. We don't need to take into account any other values of x because x = 28 satisfies this requirement.
28 toy soldiers are the correct response.
To know more about group visit:
https://brainly.com/question/28854364
#SPJ1
CAN SOMEBODY HELP ME FACTOR AS THE PRODUCT OF TWO BINOMIALS
x²- x- 42
Answer:
(x-7)(x+6)
factor and see what works
What is the answer I keep getting 32
Answer:
2 9/14
Step-by-step explanation: