please help me it's urgent​

Answer:

Explanation:

As per being a Group 7 element, it would gain one electron, which changes it's charge to 1-. It is therefore negatively charged, having a full outer shell of 8, having its electronic structure to be at 2,8,8.

Answer:

B

Explanation:

Answer:

Dùng nam chân hút đc bột sắt ra khỏi hỗn hợp

Bột gỗ và bột nhôm thì bột gỗ tan trong nước còn bột nhôm thì không

Explanation:

aqueous Magnesium Chloride reacts with liquid Bromide to form aqueous Magnesium Bromide and Chlorine gas

Answer:

neutrons should be added with the protons

Answer:

The answer would be: An atom’s nucleus occupies very little of the atom’s volume but contains most of its mass

Explanation:

The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom.

Almost all of the mass of an atom is located in the nucleus, with a very small contribution from the electron cloud.

Refer to https://en.wikipedia.org/wiki/Atomic_nucleus for further understanding

Answer:

The answer is below

Explanation:

A) The method of  extracting essential oils from aromatic plants is important however, the process of distillation is the main method for extracting the aromatic parts of plants.

B) The condenser fan plays an important role on circulating the air across the coil to facilitate heat transfer. The condenser refrigerant and pumps it to a coil in the form of a hot gas.

Answer:

0.7602 g/L

Explanation:

We'll begin by calculating the molar mass of NH₃. This can be obtained as follow:

Molar mass of NH₃ = 14.01 + (3×1.01)

= 14.01 + 3.03

= 17.04 g/mol

Finally, we shall determine the density of ammonia, NH₃. This can be obtained as follow:

Temperature (T) = 273 K

Pressure (P) = 1 atm

Molar mass of NH₃ (M) = 17.04 g/mol

Gas constant (R) = 0.0821 atm.L/Kmol

Density (D) =?

D = PM / RT

D = (1 × 17.04) / (0.0821 × 273)

D = 17.04 / 22.4133

D = 0.7602 g/L

Answer:

It is A

Explanation:

Answer:

cooling a liquid

Explanation:

Temperature is lowered and the energy of molecules, and therefore number of available configuration , is lowered

The thermal energy present in the system for the product formation is entropy. Cooling a liquid can decrease the entropy of the thermodynamic system. Thus, option C is correct.

Entropy is the energy and the heat present in the reactant of the thermodynamic system that is associated with the randomness and disorder of the particle matter in the reaction system.

Entropy is dependent on factors like dissolution, temperature, randomness, kinetic energy, etc. The entropy increases with an increase in the dissolution and tempearture.

The process of cooling liquid lowers the temperature which in turn decreases the kinetic energy and randomness of the molecules and at last, the entropy decreases.

Therefore, the cooling of the liquid decreases the entropy.

Learn more about entropy here:

https://brainly.com/question/28081833

#SPJ5

Answer:

5

Explanation:

The atomic number is the number of protons in an atom. Protons are the positively charged particles in the nucleus. The number of protons define the identity of an element. An element with 5 protons is Boron, no matter how many neutrons may be present.

The atomic number of the atom shown in the diagram is 5.

The atomic number of an element refers to the number of protons in the nucleus of its atoms. It uniquely identifies an element and determines its chemical properties.

In the diagram, there are 5 proton numbers in the nucleus of the atom. In other words, this means that the atomic number of the atom is 5.

More on atomic numbers can be found here: https://brainly.com/question/14190064

#SPJ3

this is my attachment answer hope it's helpful to you

Answer:

The reactions of the cycloalkanes are generally just the same as the alkanes, with the exception of the very small ones - particularly cyclopropane. ... In the absence of UV light, cyclopropane can undergo addition reactions in which the ring is broken

Explanation:

The periodic table brings order to information about the chemical elements. It helps chemists to understand why elements react as they do. Elements in the same group have similar chemical properties. This is because they have the same number of outer electrons and the same valency

Answer:

1.48 moles of SeCl6 are needed

Explanation:

Based on the reaction:

SeCl6 + O2 → SeO2 + 3Cl2

1 mole of SeCl6 reacts producing 3 moles of Cl2.

To solve this question we need to use the conversion factor:

1mol SeCl6 = 3mol Cl2

As we want to produce 4.45 moles of Cl2, we need:

4.45 mol Cl2 * (1mol SeCl6 / 3mol Cl2) =

Answer:

Here’s an example:

CH (methylene) is the empirical formula.

C2H2 is a molecular formula. It is a gas called Ethyne.

C8H8 is an oily liquid called Styrene. It is also a molecular formula.

Now compare: even though the empirical formula for these compounds is the same, they have different molecular formulas and different properties.

Explanation:

Some background information:

The empirical formula is the formula with the lowest whole number ratio of an element in a compound. A molecular formula is the chemical formula of a (molecular) compound. The molecular formula gives us the exact number of atoms or moles in that compound.

I have attached pictures for a better understanding of the empirical formula.

Explanation:

The nitrogen dioxide is a covalent compound where one nitrogen is the central atom which is bonded to two oxygen atoms, where one oxygen atom is bonded by a single bond and other oxygen atom by a double bond.

Answer: colavent

Explanation:

Object named H is harder than Object F due to its thickness.

The object of material H is harder than the object of material F due to the difference in thickness. The thickness of Material Object H is 3 millimeters compared to Material Object F which is 1 millimeter thick, so applying the same amount of force on both objects, Material Object H does not show any change in its structure while on the other hand, the shape of the object F changes due to a lower hardness.

https://brainly.com/question/24333064

The only option that would increase the pressure of a gas in a container is B. Increasing the temperature of the gas. Option B

To understand which factor would increase the pressure of a gas in a container, we need to consider the relationship between pressure and various variables in the ideal gas law and the kinetic theory of gases.

The ideal gas law states that pressure (P) is directly proportional to the number of gas particles (n), the temperature (T), and inversely proportional to the volume (V) of the container. Mathematically, it can be expressed as:

PV = nRT

where R is the ideal gas constant.

Based on this equation, we can analyze the options given:

A. Decreasing the kinetic energy of the gas: According to the ideal gas law, temperature is directly proportional to pressure. Therefore, decreasing the kinetic energy (which is related to temperature) would decrease the pressure, not increase it.

B. Increasing the temperature of the gas: As mentioned above, temperature is directly proportional to pressure. Increasing the temperature of the gas would increase its kinetic energy, resulting in more frequent and energetic collisions with the container walls, thus increasing the pressure.

C. Decreasing the number of gas particles: According to the ideal gas law, the number of gas particles (n) is directly proportional to pressure. Therefore, decreasing the number of gas particles would decrease the pressure, not increase it.

D. Increasing the volume of the container: According to the ideal gas law, volume (V) is inversely proportional to pressure. Increasing the volume of the container would decrease the pressure, not increase it.

For more such questions on pressure visit:

https://brainly.com/question/24719118

#SPJ8

The correct answer is: It contains both an amino functional group and a carboxyl functional group. In a solution, the amino group can

decrease acidity, while the carboxyl group can increase acidity.

The carboxyl functional group is acidic while the amine group is basic.

In an amino acid, there are two functional groups;

The carboxyl functional group is acidic because it contains a replaceable or  ionizable hydrogen ion. The amine group on the other hand is capable of accepting a proton hence it is basic.

Therefore, In a solution, the amine group can  decrease acidity, while the carboxyl group can increase acidity.

https://brainly.com/question/15823799

Answer:

1040

Explanation:

you can use the mole to mole ratios of aluminum chloride and hydrogen gas,you first have to find the number of moles of hydrogen gas..the number of moles of hydrogen gas are 11.7(23.4/2)

2AlCl3+3H2

2 : 3

x :11.7

3x/3=23.4/3

x=7.8g/mol

then find the number of grams of aluminum chloride

m=n×mr

=7.8×133.341

=1040g

I hope this helps and sorry if it's wrong

Answer:

cholesterol

Explanation:

gsdhudbdjbfmcjfjdncbdhdnhdndbchdncbdn f f ff

Answer:

linear

Explanation:

Actually I consulted various sources too and that was the most sought answer,I just decided to answer you before studying it too

Answer:

it will dilute to its natrual state. so c

Explanation:

Answer:

The reducing agent donates electron to the oxidizing agent and gets oxidized itself

Explanation:

In an oxidation-reduction reaction, also known as REDOX reaction, one of the reactants is called OXIDIZING AGENT while the other is called REDUCING AGENT. The reducing agent is called so because it reduces another substance in the reaction.

It reduces another atom/ion by donating electrons to that atom, hence, getting oxidized itself in the process. For example, in the following reaction:

H2 + F2 → 2HF

Fluorine is getting oxidized from -2 to 0 by donating electrons to H and reducing it from +2 to 0.

Answer:

Reduces another atom

Explanation:

:)

Answer:

1. Organic Alcohol

2. Ester (specifically acetate ester)

3. Organic Alcohol

4. Carboxylic acid

5. Ketone

6. Ether

7. Amine

Explanation:

You can tell what type it is both from the nomenclature and looking at the functional group on the molecular structure. Hope this helps!

Answer:

2Na + 2H2O → 2NaOH + H2

Explanation:

A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge are the same for both the reactants and the products.

Answer:

To reduce the bending of the railway

Explanation:

During summer(heat) metals tend to expand in size. The skits/gaps are present in the railway so that the metal could expand without causing bending of the railway track.

Answer:

1.717

Explanation: