Please help me order these bonds

Explanation:

From the question given above, the following data were obtained:

Molarity of stock solution (M₁) = 1.2 M

Molarity of diluted solution (M₂) = 0.5 M

Volume of diluted solution (V₂) = 100 mL

The volume of stock solution needed can be obtained by using the dilution formula as illustrated below:

1.2 × V₁ = 0.5 × 100

1.2 × V₁ = 50

Divide both side by 1.2

V₁ = 50 / 1.2

Thus, 42 mL of the stock solution is needed.

Learn more: https://brainly.com/question/24219233

Answer:

They need 41.7 mL of the original stock solution.

Explanation:

We can use the following equation for dilutions:

Cc x Vc = Cd x Vd

Where Cc and Vc are the concentration and volume values in the concentrated condition, whereas Cd and Vd are the concentration and volume values in the diluted condition.

The concentrated solution is the original stock solution, and it has:

Cc = 1.2 M

The diluted solution must be:

Cd = 0.500 M

Vd = 100 mL

So, we have to calculate Vc. For this, we replace the data in the equation:

[tex]V_{c} = \frac{C_{d} V_{d} }{C_{c} } = \frac{(0.500 M)(100 mL)}{1.2 M} = 41.7 mL[/tex]

Therefore, 41.7 mL of 1.2 M original stock solution are required to make 100  mL of a diluted solution with a concentration of 0.500 M.

Ortho and para hydrogen are nuclei forms

DNA and RNA can also be ISOLATED from the same biological sample.

So the answer is no, both DNA and RNA are together.

Answer:

so the answer is no

both DNA and RNA are together.

Explanation:

DNA and RNA can also be ISOLATED from the same. biological sample

Answer:

1090 Torr

Explanation:

Step 1: Given data

Step 2: Convert pO₂ to Torr

we will use the conversion factor 1 atm = 760 Torr.

1.0 atm × 760 Torr/1 atm = 760 Torr

Step 3: Calculate the total pressure of the mixture (P)

The total pressure of the mixture is the sum of the partial pressures of the gases.

P = 330 Torr + 760 Torr = 1090 Torr

Answer:

a. is released in the process

Explanation:

In fusion reaction the nucleus is unstable so it releases its binding energy resulting in decreasing its mass so it becomes more stable.

Answer:

Hypercalcemia can cause stomach upset, nausea, vomiting and constipation. Bones and muscles. In most cases, the excess calcium in your blood was leached from your bones, which weakens them. This can cause bone pain and muscle weakness.

Some symptoms are:

Fatigue, bone pain, headaches.

Nausea, vomiting, constipation, decrease in appetite.

Forgetfulness.

Lethargy, depression, memory loss or irritability.

Muscle aches, weakness, cramping and/or twitches.

Answer:

19.6 x 10⁵

1.96 x 10⁶

I hope it's helps you

Answer:

the repetition principle is important in scientific research, because the observational indexes are random variables,which requires a certain amount of samples to reveal their changing regularity

Answer:

8.65 atm

Explanation:

Using ideal law equation;

PV = nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

R = gas law constant (Latm/molK)

T = temperature (K)

According to the information given in this question;

V = 18.0 L

n = 6.20 moles

R = 0.0821 Latm/molK

T = 33°C = 33 + 273 = 306K

P = ?

Using PV = nRT

P × 18 = 6.20 × 0.0821 × 306

18P = 155.76

P = 155.76/18

P = 8.65 atm

Solution :

Given :

Partial pressure of HCl, [tex]$P_{HCl}$[/tex] = 84.4 atm

Partial pressure of [tex]H_2[/tex], [tex]$P_{H_2}$[/tex] = 77.9 atm

Partial pressure of [tex]Cl_2[/tex], [tex]$P_{Cl_2}$[/tex] = 54.4 atm

Reaction :

[tex]$2HCl (g) \leftrightharpoons H_2(g) + Cl_2(g)$[/tex]

Using equilibrium concept,

[tex]$k_p=\frac{(P_{H_2})(P_{Cl_{2}})}{(P_{HCl})^2}$[/tex]

[tex]$k_p=\frac{77.9 \times 54.4}{(84.4)^2}$[/tex]

[tex]$k_p=0.594$[/tex]

[tex]k_p=0.59[/tex]  (in 2 significant figures)

or [tex]k_p=5.9 \times 10^{-1}[/tex]

Answer:

2.21% wt/v

Explanation:

The mass/volume percentage, %wt/v, is an unit of concentration used in chemistry defined as 100 times the ratio of the mass of solute in g (In this case, CaCl2 = 1.77g) and the volume of solution in mL = 80mL

The %wt/v of this solution is:

%wt /v = 1.77g / 80mL * 100

%wt/v = 2.21% wt/v

Answer:

One compound, called n-butane, where the prefix n- represents normal, has its four carbon atoms bonded in a continuous chain. The other, called isobutane, has a branched chain. Different compounds that have the same molecular formula are called isomers.

Answer:

d. constitutional isomers​

Explanation:

i hope it will help

Answer:

^#))(899900000)My020

Answer:

The following statements represent the differences between a voltaic cell and an electrolytic cell -

A potential is generated by a chemical reaction and for electrolytic cells, a potential is needed.

The following statements represent the differences between a voltaic cell and an electrolytic cell -

Thus, The following statements represent the differences between a voltaic cell and an electrolytic cell -

Learn more:

https://brainly.com/question/3614785

Answer:

As stored fuels, triacylglycerols have two significant advantages over polysaccharides such as glycogen and starch. The carbon atoms of fatty acids are more reduced than those of sugars, and oxidation of triacylglycerols yields more than twice as much energy, gram for gram, as that of carbohydrates.

Explanation:

Answer:

Explanation:

nFeSo4=3.36/152

nkmno4=1/5nFeSO4

V=17.68 ml

Solution :

[tex]H_2CO_3[/tex] is considered a diprotic acid.

Sp it can dissociate in solution by giving two protons.

Chemical equations for the first step of carbonic acid is :

First ionization

[tex]$H_2CO_3(aq) + H_0(1) \rightleftharpoons H_.O^+(aq) + HCO_3^-(aq)$[/tex]

Equilibrium constant expression is

[tex]$K_{a}_{1}=\frac{[H_3O^+][HCO_3^-]}{[H_2CO_3]}$[/tex]

Second ionization -

[tex]$HCO_3^-(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CO_3^{2-}(aq)$[/tex]

Equilibrium constant expression is

[tex]$K_{a2}=\frac{[H_3O^+][CO_3^{2-}]}{[HCO_3^-]}$[/tex]

Answer:

The right answer is "105.17 ppb".

Explanation:

According to the question,

The amount of [tex]Pb^{2+}[/tex] in ppb will be:

= [tex]0.5076\times 10^{-6}\times 207.2\times 106[/tex]

= [tex]105.17 \ ppb[/tex]

Thus, the amount of [tex]Pb^{2+}[/tex] is above action limit.

Answer:

Explanation:

The moles of H2 and N2 are as follows respectively, 0.3915mol of H2 and 0.1305 mol of N2.

0.2175,0.0725 moles of [tex]H_2[/tex] and [tex]N_2[/tex] can be formed by the decomposition of 0.145 mol of ammonia, [tex]NH_3[/tex]

The reaction for the decomposition of ammonia is as follows:-

[tex]N_2+3H_2 \rightarrow 2NH_3[/tex]

Calculate the mole  of [tex]H_2[/tex] and [tex]N_2[/tex] as follows:-

[tex]Mole\ of \ H_2=0.145\ mol\ NH_3\times\frac{3\ mol\ H_2}{2\ mol\ NH_3} \\\\=0.2175\ mol\ H_2[/tex]

[tex]Mole\ of \ N_2=0.145\ mol\ NH_3\times\frac{1\ mol\ N_2}{2\ mol\ NH_3} \\\\=0.0725\ mol\ H_2[/tex]

Hence, the number of moles of [tex]H_2[/tex] and [tex]N_2[/tex]  are 0.2175 mol, and 0.0725 mol.

To know more about:-

https://brainly.com/question/12996575

Explanation:

Dissolve 93.52g of NaCl in about 400mL of distilled water, then add more water until final volume is 800mL. If starting with a solution or liquid reagent: When diluting more concentrated solutions, decide what volume(V2) and molarity (M2) the final soluble should be.

Answer:

See explanation

Explanation:

The molecular mass is the sum of the relative atomic masses of all the atoms in the molecule.

The relative atomic mass of reactants and products are calculated as follows;

Benzoic acid is C7H6O2 hence the molar mass of benzoic acid is ;

7(12) + 6(1) + 2(16) = 84 + 6 + 32 = 122.0 g/mol

Methyl benzoate is C8H8O2

8(12) + 8(1) + 2(16) = 96 + 8 + 32 = 136.0 g/mol

Answer:

2 m/s

Explanation:

Applying the formulae of velocity,

V = d/t............. Equation 1

Where V = Velocity of the body, d = distance, t = time

From the question,

Given: d = 600 m, t = 5 minutes = (5×60) = 300 seconds.

Substitute these values into equation 1

V = 600/300

V = 2 m/s.

Hence the velocity of the body when it travels is 2 m/s

Let's consider the neutralization reaction between HCl and NaOH.

NaOH + HCl ⇒ NaCl + H₂O

To determine the pH of the resulting mixture, we need to determine the reactant in excess. First, we will calculate the reacting moles of each reactant.

NaOH: 0.0500 L × 0.500 mol/L = 0.0200 mol

HCl: 0.0750 L × 0.250 mol/L = 0.0188 mol

Now, let's determine the reactant in excess and the remaining moles of that reactant.

                    NaOH    +     HCl ⇒ NaCl + H₂O

Initial           0.0200       0.0188

Reaction    -0.0188       -0.0188

Final         1.20 × 10⁻³          0

The volume of the mixture is 50.0 mL + 75.0 mL = 125.0 mL. Then, 1.20 × 10⁻³  moles of NaOH are in 125.0 mL of solution. The concentration of NaOH is:

[NaOH] = 1.20 × 10⁻³ mol/0.1250 L = 9.60 × 10⁻³ M

NaOH is a strong base according to the following equation.

NaOH ⇒ Na⁺ + OH⁻

The concentration of OH⁻ is 1/1 × 9.60 × 10⁻³ M = 9.60 × 10⁻³ M.

The pOH is:

pOH = -log [OH⁻] = -log 9.60 × 10⁻³ = 2.02

We will calculate the pH using the following expression.

pH = 14.00 - pOH = 14.00 - 2.02 = 11.98

The pH is 11.98. Since pH > 7, the solution is basic.

You can learn more about neutralization here: https://brainly.com/question/16255996

Answer:

false, it is not an example of facilitated diffusion

Answer:

Explanation:

When a drop of ink added into the water gradually moves in the whole quantity of water due to this entire water turns into blue color. This is nothing but the diffusion of ink particles into the water molecules. This is because water, as well as ink molecules, are in random motion due to the motion of ink substance.

Answer:

21.4g of HBr is the minimum mass that could be left over.

Explanation:

Based on the reaction:

HBr + NaOH → NaBr + H2O

1 mole of HBr reacts per mole of NaOH

To solve this question we need to find the moles of both reactants. If moles NaOH > moles HBr, the difference in moles represents the minimum moles of HBr that could be left over because this reaction is 1:1. Using the molar mass we can find the minimum mass of HBr that could be left over, as follows:

Moles NaOH -40.0g/mol-

17g * (1mol/40.0g) = 0.425 moles NaOH

Moles HBr -Molar mass: 80.91g/mol-

55.8g * (1mol/80.91g) = 0.690 moles HBr

The difference in moles is:

0.690 moles - 0.425 moles =

0.265 moles of HBr could be left over

The mass is:

0.265 moles * (80.91g/mol) =

Answer:

Livermorium is a radioactive, artificially produced element about which little is known. It is expected to be a solid and classified as a metal. It is a member of the chalcogen group. Livermorium has four isotopes with known half-lives, all of which decay through alpha decay

Answer:

p'PCl3 =  6.8 torr

p'Cl2 =26.4 torr

p'PCl5 =223.4 torr

Explanation:

An equilibrium mixture of PCl5(g), PCl3(g), and Cl2(g) has partial pressures of 217.0 Torr, 13.2 Torr, and 13.2 Torr, respectively. A quantity of Cl2(g) is injected into the mixture, and the total pressure jumps to 263.0 Torr at the moment of mixing. The system then re-equilibrates. The chemical equation for this reaction is

PCl3(g) + Cl2(g) ---> PCl5(g)

Calculate the new partial pressures after equilibrium is reestablished. [in torr]

pPCl3

pCl2

pPCl5

Step 1: Data given

Partial pressure before adding chlorine gas:

Partial pressure of PCl5 = 217.0 torr

Partial pressureof PCl3 = 13.2 torr

Partial pressureof Cl2 = 13.2 torr

A quantity of Cl2(g) is injected into the mixture, and the total pressure jumps to 263.0 Torr at the moment of mixing

Step 2: The equation

PCl3(g)+Cl2(g) ⇔ PCl5(g)

Step 3: The expression of an equilibrium constant before adding chlorine gas

Kp = pPCl5 / (pPCl3 * pCl2)

Kp = 217.0 / (13.2 * 13.2)

Kp =  1.245

Step 4:  The expression of an equilibrium constant after adding chlorine gas

Partial pressure of PCl5 = 217.0 torr

Partial pressure of PCl3 = 13.2

Partial pressure of Cl2 = TO BE DETERMINED

Step 5: The total pressure of the system

Ptotal = pPCl5 + pPCl3 + pCl2

263.0 torr = 217.0 torr + 13.2 torr + pCl2

pCl2 = 263.0 - 217.0 -13.2 = 32.8 torr

Step 6: The initial pressure

The equation: PCl3(g)+Cl2(g) ⇔ PCl5(g)

pPCl3 = 13.2 torr

pCl2 = 32.8 torr

pPCl5 = 217.0 torr

Step 7: The pressure at the equilibrium

p'PCl3 = (13.2 -x) torr

p'Cl2 = (32.8 - x) torr

p'PCl5 = (217.0 + x) torr

Step 8: The equilibrium constant

'Kp =  p'PCl5 / (p'PCl3 * p'Cl2)

1.245 = (217.0+x) / ((13.2-x)(32.8-x)

x = 6.40 torr

p'PCl3 = 13.2 -6.40 = 6.8 torr

p'Cl2 = 32.8 - 6.40 =26.4 torr

p'PCl5 = 217.0 + x) 6.4 = 223.4 torr

Answer:

That involve the complete transfer of an electron from one atom of an element to another

Follow the rules of Bronsted Lowry theory

So

#a

NH_2-

Add a H

#b

HnO_3

Take a H

#1

Conjugate acid means one H+ is added

sw

#2

Conjugate base means donate a H+