Please help will give brainliest

Answer:

the 750 j will have potential energy is 375

Explanation:

750/2 is 375

Answer:

Earth's rotation and orbit and the Moon's orbit cause observable patterns (Day and night, seasons, phases of the Moon, tides).

Explanation:

The solution is be found in the attachment.

A horizontal net force F is exerted on an object at rest. The object starts at x = 0 m and has a speed of 4.0 m/s after moving 8.0 m along a horizontal frictionless surface. The net force F as a function of the object's position x is shown below.

What is the mass of the object?

Answer: 30 kg

Answer:

Explanation:

it's blocked for me...it was unblocked but you know how everything else is blocked

Answer:

Image result for Why does the Moon appear red during a lunar eclipse?

A lunar eclipse takes place when the sun, Earth and moon line up in space. The moon passes through Earth's shadow. ... Bottom line: The moon can look red during a total lunar eclipse because of sunlight that's filtered and refracted by Earth's atmosphere

Answer:

The final equilibrium temperature of the tin-water mixture is approximately 18.468 °C

Explanation:

The parameters of heat energy transfer from the tin to the water are given as follows;

The mass of the sample of tin, m₁ = 0.225 kg

The initial temperature of the tin, T₁ = 97.5 °C

The mass of the water into which the tin is dropped, m₂ = 0.115 kg

The initial temperature of the water, T₂ = 10.0 °C

The specific heat capacity of tin, c₁ = 230 J/(kg·°C)

The specific heat capacity of water, c₂ = 4,200 J/(kg·°C)

Let 'T' represent the final equilibrium temperature of the tin-water mixture, we have;

The heat lost by the tin, ΔQ[tex]_{tin}[/tex] = The heat gained by the water ΔQ[tex]_{water}[/tex]

∴  ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex]

Where;

ΔQ[tex]_{tin}[/tex] = m₁·c₁·(T₁ - T)

ΔQ[tex]_{water}[/tex] = m₂·c₂·(T - T₂)

By substitution, we have;

ΔQ[tex]_{tin}[/tex] = 0.225 kg × 230 J/(kg·°C) × (97.5°C - T)

ΔQ[tex]_{water}[/tex] = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

From ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex], we have;

0.225 kg × 230 J/(kg·°C) × (97.5°C - T) = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

∴ 5,045.625 J - 51.75 J/°C × T = 483 J/°C × T - 4,830 J

5,045.625 J + 4,830 J = 534.75 J/°C × T

∴ 534.75 J/°C × T = 9,875.625 J

T =  9,875.625 J/(534.75 J/°C) = 18.4677419 °C ≈ 18.468 °C

The final equilibrium temperature of the tin-water mixture, T ≈ 18.468 °C.

Answer:

4 N

Explanation:

mass = 2 kg

acceleration = 2 m/s^2

Force = mass * acceleration

         = 2 *2

         = 4 N

Answer:

Maximum Height

Explanation:

The maximum height is the highest point reached by a projected body. At this point, final velocity, v of the body is equal to 0; because upward motion is at its peak and the body start to fall again.

Hence, final velocity v is always 0 at this maximum point and the direction of motion changes from upward to downward.

Final velocity at this maximum height is zero because of the directional change experied by the object and the fact that upward motion of the body terminates at this point.

Answer:

A gas

Explanation:

Answer:

Potential energy does not have an absolute measurement. It is always relative to some reference point. Gravitational potential always increases when you go up and decreases when you go down. But the choice of a zero point is arbitrary.

If you’re dropping objects onto the ground, then choosing the ground as a zero point makes the calculations easier. But you could just as easily make the zero point the top of Mt. Everest, and all the answers would turn out the same. Up still means more energy and down means less, but now the PE of an object at sea level would have a negative sign, but not as negative as an object ten meters above sea level.

So everything would still work fine.

In fact, planetary astronomers take this idea to extremes. Instead of the top of Mt. Everest, they set the zero point for potential energy as infinitely high—so far “up” that gravity is so weak that going “up” another kilometer doesn’t gain you any energy. Then the value for potential energy everywhere else in the universe anywhere near a planet has a negative sign, but just as before, all the answers in relative terms turn out fine.

Explanation:

PLEASE MARK ME AS BRAINLIEST

Answer:

wire By please mark my answer in brain list

Answer:

Remove wire G, if the wire after it is F. Remove wire A as C is connecting to it already.

Answer:

The amount of mechanical energy produced by the old lorry when 600 Joules of chemical energy have been used by the engine, M.E. is 120 Joules

Explanation:

The question is a word problem on the relationship between energy efficiency and energy consumption

The given parameters of the old lorry are;

The chemical energy to mechanical energy conversion efficiency of the old lorry = 20%

The amount of chemical energy used by the engine = 600 joules

Let 'M.E.' represent the amount of mechanical energy produced by the old lorry, we have;

[tex]Energy \ Efficiency = \dfrac{Energy \ produced }{Total \ Energy \ Taken \ In \ or \ Used} \times 100[/tex]

Therefore, the for the old lorry, we have;

[tex]20\% = \dfrac{M.E. \ Produced}{600 \ Joules} \times 100[/tex]

∴ M.E. Produced = 20/100 × 600 J = 120 J

The amount of mechanical energy produced by the old lorry when 600 Joules of chemical energy have been used by the engine, M.E. = 120 Joules

Answer:

P = 928.09 Pa

Explanation:

Given that,

Mass of a gas cylinder, m = 90 kg

The diameter of the cylinder, d = 1.1 m

Radius, r = 0.55 m

We need to find the ground pressure. The pressure is equal to force per unit area. So,

[tex]P=\dfrac{F}{A}\\\\P=\dfrac{mg}{\pi r^2}\ (A\ is\ area\ of\ base)\\\\P=\dfrac{90\times 9.8}{\pi \times (0.55)^2}\\\\P=928.09\ Pa[/tex]

So, the ground pressure is 928.09 Pa.

Answer:

C. lonic bonds involve the transfer of electrons between ions, while

Van der Waals forces involve the attraction of nonpolar molecules.

Explanation:

Just did it

Answer:

17.3 miles

Explanation:

Answer:

35%

Explanation:

Answer:

its 83

Explanation:

Answer:

1 AND 3

Explanation:

Answer:

D: 2π/√k0

Explanation:

I got it right

The slope of the line of best fit is the quantity 2π/√ko.

The line of best fits is used to show the relationship between two variables. The nature of the graph shows the relationship between the variables.

We can see that this is a graph of the period of oscillation against the square root of the mass of the body. The slope of the line of best fit is the quantity 2π/√ko.

Learn more about oscillation: https://brainly.com/question/3930479

the answer is "all organisms evolve at the same rate" :)

Answer:

answer is b

Explanation:

Answer:

Explanation:

F = qE

F is the force in Newtons

q is the test charge

E is the electrical field produced by the source charge

[tex]5=q(50)\\q=1*10^-^1Coulombs[/tex]

The magnitude of charge on the object is of 0.1 C.

Given Data:

The magnitude of electric field is, E = 50 N/C.

The magnitude of Electric force is, F = 5 N.

The region where any particle feels the effect of electric force on itself, due to other charged entities, is known as Electric field. And the relation between the electric force and electric field is given as,

F = E × q

Here,

q is the magnitude of charge on the object.

Solving as,

q = F/E

q = 5 / 50

q = 0.1 C

Thus, we can conclude that the magnitude of charge on the object is of 0.1 C.

Learn more about the electric field here:

https://brainly.com/question/8971780

Answer:

All of the Above

walking

Answer:

4.2 m/s

the balls final speed is V (m/s)

because the clay ball hits another and the two stick together

=> 0,35.4,2 + 0,35.4,2 = (0,35 + 0,35).V

<=> 2,94 = 0,7V

<=> V = 2,94/0,7 = 4,2

For a clay ball with a mass of 0.35 kg, the ball's final speed is mathematically given as

V2= 4.2

Question Parameter(s):

A clay ball with a mass of 0.35 kg

Hits another 0.35 kg ball at rest and the two stick together.

The first ball's initial speed is 4.2m/s.

Generally, the equation for the conservation of momentum is mathematically given as

M1v1=m2v2

Therefore

0.35*4.2 + 0.3*5.4.2 = (0.35 + 0.35)*V

2,94 = 0,.7V

V2 = 2.94/0.7

V2 = 4.2

In conclusion

V2= 4.2

Read more about Speed

https://brainly.com/question/4931057

#SPJ2

The snail would travel 100mm

Each minutes is 25mm and it took 4 minutes

4 x 25 = 100

or

25+25+25+25=100

Answer:

Explanation:

the answer is C.)

The torque produced by a perpendicular force of 75 N at the end of a 0.2 m wrench is 15 Nm.

The force which causes the object to rotate about any axis is called torque. In math form, it is equivalent to the product of force and perpendicular distance.

Torque is a twisting or turning force that frequently results in rotation around an axis, which may be a fixed point or the center of mass. The ability of something rotating, such as a gear or a shaft, to overcome turning resistance is another way to think of torque.

Given:

The perpendicular force on the wrench, P = 75 N,

The length of the wrench, r = 0.2 m,

Calculate the torque of the wrench as shown below,

The torque of the wrench = r × P × sin a

Here, the force is perpendicular hence, a = 90°

The torque of the wrench = 0.2 × 75 × sin90

The torque of the wrench = 15 × 1

The torque of the wrench = 15

Thus, the torque on the wrench is 15 Nm.

To know more about torque:

https://brainly.com/question/28220969

#SPJ2

Answer:

241,274.32 inches

Explanation:

How far will he travel if the rear wheel makes 1200 revolutions on the road?

Since the rear wheel makes one revolution in the distance of a circumference of a circle, C with diameter, d = 16 inches

C = πd²/4

So, the distance, travelled in 1200 revolutions is D = 1200 × C = 1200πd²/4

Substituting d = 16 into D, we have

D = 1200πd²/4

D = 1200π(16)²/4

D = 76800π

D = 241,274.32 inches

Answer:

D force mass and distance