Please help with my chemistry! PLEASE

Answer:

Option B is correct.

0.119 mole of Kr has a mass of 10.0 g

Explanation:

The complete Question was ontained online, albeit, it was incomplete, even from the online source. But the solution is possible based on the part of the question obtained.

Complete Question

Which of the following Noble Gases has a mass of 10.0 g?

A. 2.02 mol Ne B. 0.119 mol Kr C.

Solution

Number of moles = (Mass)/(Molar Mass)

Mass = (Number of moles) × (Molar mass)

Checking the options, one at a time,

A. 2.02 moles of Neon

Number of moles = 2.02 moles

Molar Mass of Neon = 20.1797 g/mol

Mass = 2.02 × 20.1797 = 40.762994 g ≠ 10.0 g

Not the answer.

B. 0.119 moles of Krypton

Number of moles = 0.119 moles

Molar Mass of Krypton = 83.798 g/mol

Mass = 0.119 × 83.798 = 9.971962 g ≈ 10.0 g

This is definitely the answer.

Hope this Helps!!!

Answer: 0.119 mol Kr

Explanation:

Answer:

- From octane: [tex]m_{CO_2}=1.54x10^5gCO_2[/tex]

- From ethanol: [tex]m_{CO_2}=9.57x10^4gCO_2[/tex]

Explanation:

Hello,

At first, for the combustion of octane, the following chemical reaction is carried out:

[tex]C_8H_{18}+\frac{25}{2} O_2\rightarrow 8CO_2+9H_2O[/tex]

Thus, the produced mass of carbon dioxide is:

[tex]m_{CO_2}=5.00x10^4gC_8H_{18}*\frac{1molC_8H_{18}}{114gC_8H_{18}}*\frac{8molCO_2}{1molC_8H_{18}}*\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=1.54x10^5gCO_2[/tex]

Now, for ethanol:

[tex]C_2H_6O+3O_2\rightarrow 2CO_2+3H_2O[/tex]

[tex]m_{CO_2}=5.00x10^4gC_2H_6O*\frac{1molC_2H_6O}{46gC_2H_6O}*\frac{2molCO_2}{1molC_2H_6O}*\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=9.57x10^4gCO_2[/tex]

Best regards.

Answer:

Find the element,

Explanation:

Finding the element will tell you how many protons there are. For example, if you are given an atom of oxygen, you can figure out the number of protons by looking it up on a periodic table, which gives you 8.

If an atom is neutral, find the number of electrons. This number will also be the number of protons.

Answer:

B. Prominences are composed of cool, dense gas.

C. Prominences can disturb radio communications on Earth.

D. Prominences cycle over an 11-year period.

E. Prominences are loop shaped.

Explanation:

Prominence is the release of high energy particles or dense gases in the form of a loop shape from the surface of the sun. It is cooler and flows out into the Sun's hot atmosphere known as corona.

Once formed, prominence can be quiescent in the space for some period of time before it erupt and get ejected. This eruption and ejection can lead to coronal mass ejections which extends over a very long distance.

When compared to the Sun's temperature, prominences are cooler.

Answer:

B C E

Explanation:

Answer:

An organ

Explanation:

An organ is one or more tissues that work together to form a specific function.

- Hope that helps! Please let me know if you need further explanation.

Answer:

28.69 grams

Explanation:

To find the mass, we first need to find the moles. Once we have the moles, it is easy to use the molar mass of H2SO4 to find its mass.

To find the moles, remember that molarity (M) is equal to the moles divided by the volume (L). The volume HAS TO be converted to liters!

M = moles / V

5.85 M = moles / 0.05 L

moles = 0.2925

Now we know that we have 0.2925 moles of sulfuric acid. The molar mass of sulfuric acid is 98.08 g/mol.

0.2925 moles * (98.08 g / mol) = 28.69 grams

Make sense? If you have any questions, don't hesitate to ask!

Answer:

Hydrogen bonding.

Explanation:

Ammonium lauryl sulfate is also known as ammonium dodecyl sulfate there are two parts in Ammonium lauryl sulfate one is nonpolar hydrocarbon and other part polar sulfate group.

Due to polarity of sulfate group its form hydrogen bond very easily.

It is mainly used as foaming agent the main reason of its use is very much soluble in water and making hydrogen bond with water.

Answer:

?

Explanation:

What are the statements? You've given the passage but not the statements

Answer: molecules get closer

Explanation:

Condensation is the process in which molecules of a gas slow down, come together, and form a liquid. When gas molecules transfer their energy to something cooler, they slow down and their attractions cause them to bond to become a liquid

hope this helps

pls mark me brainliest

Answer:

D. The molecules get closer together and move more slowly.

Answer:

B) 88.6%

Explanation:

Percent yield equals actual yield divided by theoretical yield

actual yield is 31.0g

theoretical yield is 35g

percent yield was 88.57 which rounds up to 88.6%

Answer:

What ever you want. I made it like this because it would make the most logical sense with a mix of the Dot system.

Explanation:

Since the question says to explain yourself, and to predict, really any answer would be correct since it sounds like it's not asking for a correct answer, but more of an answer that would make sense to you and explain it. That's really what chemistry is, a bunch of educated responses and guesses with confidence.

Answer:

[tex]4.6\,\,moL\,\,L^{-1}[/tex]

Explanation:

Molarity refers to a measure of concentration.

Molarity = moles of solute/Litres of solution

Molarity refers to number of moles of solute present in this solution.

In order to find a solution's molarity, use value for the number of moles of solute  and the total volume of the solution expressed in liters

As molarity of 2.3 mol of Kl is dissolved in 0.5 L of water,

Molarity = [tex]\frac{2.3}{0.5} =4.6\,\,moL\,\,L^{-1}[/tex]

gas with the smallest amount of molecular weight will effuse the quickest

Answer:

hypothalamus

Explanation:

Answer:

- [tex][H^+]=1x10^{-12}[/tex]

- Basic.

Explanation:

Hello,

In this case, given the concentration of hydroxyl ions, one could compute the pOH as shown below:

[tex]pOH=-log([OH^-])=pOH=-log(1x10^{-2})=2[/tex]

Then, since the pOH and the pH are related by:

[tex]pH+pOH=14[/tex]

One computes the pH:

[tex]pH=14-pOH=14-2=12[/tex]

Now, we compute the concentration of hydronium by:

[tex][H^+]=10^{-pH}=10^{-12}[/tex]

[tex][H^+]=1x10^{-12}[/tex]

Finally, since the pH is greater than 7 (neutral point) we conclude that the solution is basic.

Best regards.

Answer:

A. Hydrogen ion concentration, [H+] is 1x10^–12 mol/L

B. Since the pH is 12, the solution is basic.

Explanation:

Data obtained from the question. This includes the following:

Concentration of Hydroxide ion, [OH-] = 1x10^–2 mol/L

Concentration of Hydrogen ion, [H+] =.?

pH =..?

A. Determination of the hydrogen ion concentration, [H+] .

The hydrogen ion concentration, [H+] can be obtained as follow:

[H+] x [OH-] = 1x10^–14

[OH-] = 1x10^–2

[H+] x 1x10^–2 = 1x10^–14

Divide both side by 1x10^–2

[H+] = 1x10^–14 / 1x10^–2

[H+] = 1x10^–12 mol/L

B. Determination of the pH of the solution.

The pH of the solution can be obtained as follow:

pH = –Log [H+]

[H+] = 1x10^–12 mol/L

pH = –Log 1x10^–12

pH = 12.

Then pH of a solution ranges between 0 and 14.

A pH reading between 0 and 6 is termed an acidic solution, a pH reading of 7 is termed a neutral solution and a pH reading between 8 and 14 indicates an alkaline or a basic solution.

The higher the pH value, the more alkaline or basic the solution becomes.

Since the pH is 12, the solution is basic.

Answer:

neutral, acidic, basic

Explanation:

Know the acidity rules. Sorry I just saw this!

- Hope that helps! Please let me know if you need further explanation.

Answer: 1- gas 2- solid

Explanation:

Answer: 2.13

Explanation: i crawled so you could run :)

Answer:

The options that apply to the description of grid-lines of the map are;

They are measured in degrees

They set up a reference system

They divide Earth into four equal parts

FIRST OPTION , SECOND OPTION and FIFTH OPTION are correct.

Explanation:

FIRST OPTION gave the describtion that the grid-lines of the map are measure in degrees,this option is applied to the gridlines on a map because the grid are lined as a result of angular measurement which makes it to makes the unit to be measured degrees and angles.

SECOND OPTION described it as been set up by a reference system which let us know that the area that are plotted were all grid as a result of the size

FIFTH OPTION also applied to the

description of the gridlines on a map because the Earth is divided into 4 equal parts through the Prime Meridian i.e the latitudinal line and longitudinal line .

.

Answer:

They are measured in degrees.

They set up a reference system.

They divide Earth into four equal parts.

Explanation:

i took the test

Answer:

[tex]x = 6.634\times 10^{23}\,atoms[/tex]

Explanation:

The quantity of atoms within the mass of copper is determined by multiplying the quantity of moles by the Avogadro's Number:

[tex]x = \left(\frac{70\,g}{63.546\,\frac{g}{mol}} \right)\cdot \left(6.022\times 10^{23}\,\frac{atoms}{mol} \right)[/tex]

[tex]x = 6.634\times 10^{23}\,atoms[/tex]

Answer:

6.64x10^23 atoms.

Explanation:

From Avogadro's hypothesis, 1 mole of any substance contains 6.02x10^23 atoms. This implies that 1 mole of Cu also contains 6.02x10^23 atoms.

1 mole of Cu = 63.5g

If 63.5g of Cu contains 6.02x10^23 atoms,

Then 70g of Cu will contain = (70x6.02x10^23) /63.5 = 6.64x10^23 atoms.

Therefore, there are 6.64x10^23 atoms in 70g oh Cu

Answer:

P IBr: 15.454atm

I₂: 0.923 atm

P Br₂: 0.923atm

Explanation:

Basados en la reacción:

I₂(g) + Br₂(g) ⇄ 2 IBr(g)

La constante de equilibrio, Keq, es definida como:

[tex]Keq = \frac{P_{IBr}^2}{P_{I_2}P_{Br_2}}[/tex]

Se cumple la relación de Keq = 280 cuando las presiones están en equilibrio

Usando PV = nRT, la presión inicial de IBr es:

P = nRT / V; 0.500mol*0.082atmL/molK*423.15K / 1.00L = 17.3 atm

Siendo las presiones en equilibrio:

P IBr: 17.3 - 2X

P I₂: X

P Br₂: X

Donde X representa el avance de reacción.

Remplazando en Keq:

280 = (17.3 - 2X)² / X²

280X² = 4X² - 69.2X + 299.29

0 = -276X² - 69.2X + 299.29

Resolviendo para X:

X = -1.174 → Solución falsa. No existen presiones negativas

X = 0.923 → Solución real

Así, las presiones parciales en equilibrio de cada compuesto son:

P IBr: 17.3 - 2X = 15.454atm

P I₂: X = 0.923atm

P Br₂: X = 0.923atm

Answer:

[tex]p_{I_2}=0.926atm\\p_{Br_2}=0.926atm\\p_{IBr}=15.5atm[/tex]

Explanation:

Hello,

In this case, given the initial load of 0.500 mol of IBr in the 1.00-L, we compute its initial concentration:

[tex][IBr]_0=\frac{0.500mol}{1.00L}=0.500M[/tex]

Hence, by knowing the original reaction, we should invert it as IBr will produce iodine and bromine considering the initial load:

[tex]2IBr(g)\rightleftharpoons I_2(g) + Br_2(g)[/tex]

Therefore, the equilibrium constant should be inverted:

[tex]K'=\frac{1}{Keq}=\frac{1}{280}=3.57x10^{-3}[/tex]

So we write the law of mass action:

[tex]K'=\frac{[I_2][Br_2]}{[IBr]^2}[/tex]

That in terms of the change [tex]x[/tex] due to the reaction extent turns out:[tex]3.57x10^{-3}=\frac{(x)(x)}{(0.500-2x)^2}[/tex]

In such a way, solving by using solver or quadratic equation we obtain:

[tex]x_1=-0.0339M\\x_2=0.0267M[/tex]

Clearly, the solution is 0.0267M, thus, the equilibrium concentrations are:

[tex][I_2]=x=0.0267M[/tex]

[tex][Br_2]=x=0.0267M[/tex]

[tex][IBr]=0.5M-2x=0.5M-2*0.0267M=0.447M[/tex]

Thus, with the given temperature (150+273.15=423.15K), we compute the partial pressures by using the ideal gas equation:

[tex]p_{I_2}=[I_2]RT=0.0267\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{I_2}=0.926atm\\\\p_{Br_2}=[Br_2]RT=0.0267\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{Br_2}=0.926atm\\\\p_{IBr}=[IBr]RT=0.447\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{IBr}=15.5atm[/tex]

Best regards.

Answer:

A

help u and it's A

Explanation:

Answer:A

Explanation:

Answer: A

Explanation:

answer:it is false

explanation: as it is true or false I think you don't need explanation

Answer:

5 electron groups, see saw

Explanation:

During the formation of SF4, the sulfur atom usually bonds with each of four fluorine atoms where 8 of valence electrons are used. The four fluorine atoms have 3 lone pairs of electrons in its octet which will further utilize 24 valence electrons. In addition, two electrons are present as a lone pair on the sulfur atom. We can determine sulfur’s hybridization state by counting of the number of regions of electron density on sulphur (the central atom in the molecule). When bonding takes place there is a formation of 4 single bonds to sulfur and it has 1 lone pair. Looking at this, we can say that the number of regions of electron density is 5. The hybridization state is sp3d.

SF4 molecular geometry is seesaw with one pair of valence electrons. The molecule is polar. The equatorial fluorine atoms have 102° bond angles instead of the actual 120° angle. The axial fluorine atom angle is 173° instead of the actual 180° bond angle.

Answer:

Radioactive isotopes ranging from 11O to 26O have also been characterized, all short-lived. The longest-lived radioisotope is 15O with a half-life of 122.24 seconds, while the shortest-lived isotope is 12O with a half-life of 580(30)×10−24 seconds (the half-life of the unbound 11O is still unknown).

Answer:A heating curve graphically represents the phase transitions that a substance undergoes as heat is added to it. The plateaus on the curve mark the phase changes. The temperature remains constant during these phase transitions.

Answer:

Ideal Gas Law

PV = nRT

Explanation:

Pressure is proportional to temperature;

The heat of the fire would cause increased pressure inside the closed aerosol vessel, eventually resulting in explosion of the vessel, once the temperature rises enough.

Answer:

The "Parkfield earthquake prediction experiment" was the most heralded scientific earthquake prediction ever. It was based on an observation that the Parkfield segment of the San Andreas Fault breaks regularly with a moderate earthquake of about M 6 every several decades: 1857, 1881, 1901, 1922, 1934, and 1966.

Explanation:

this is the best I could come up with. luv u.