Please Help With this question, No.3

The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol. This enthalpy change is referred to as the heat of reaction, or enthalpy of reaction, and can be calculated using the enthalpy of formation of each reactant and product in the reaction.

The enthalpy of formation for carbon is given as +716 kJ/mol and for oxygen it is given as 0 kJ/mol. The enthalpy of formation for CO2 is given as -393.5 kJ/mol. Using Hess’s law, we can calculate the enthalpy of reaction using the following equation:  ΔHreaction = (ΔHformation CO2) - (ΔHformation C + ΔHformation O2)

Using the values for the enthalpies of formation for the reactants and products, the enthalpy of reaction can be calculated as follows: ΔHreaction = (-393.5) - (716 + 0) = -349 kJ/mol.This is the same enthalpy change as given in the question.

In conclusion, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol.

Know more about  enthalpy change here:

https://brainly.com/question/29556033

#SPJ11

The concentration of a solution is defined as the amount of solute that has been dissolved in a given amount of solvent. The most concentrated solution is one that has the highest amount of solute dissolved in a given amount of solvent is 0.3 mole of solute dissolved.

Concentration is defined as the number of solute particles in a given volume of solution. It can be expressed in a variety of ways, including mass percent, mole fraction, molarity, and molality.

The solution with 0.3 mole of solute dissolved is the most concentrated. 0.1 mole of solute dissolved in 400 ml of solvent

0.2 mole of solute dissolved in 300 ml of solvent

0.3 mole of solute dissolved in 500 ml of solvent.

The concentration of a solution is defined as the amount of solute that has been dissolved in a given amount of solvent. Let's calculate the concentration of each solution using the formula of concentration:

Molarity = Number of moles of solute/Volume of solution (L)

For (1), Number of moles of solute = 0.1 mole. Volume of solution = 400 ml = 0.4 L. Concentration,

C = Number of moles of solute/Volume of solution (L)

C = 0.1/0.4 = 0.25 mol/L

For (2), Number of moles of solute = 0.2 mole. Volume of solution = 300 ml = 0.3 L.

Concentration,

C = Number of moles of solute/Volume of solution (L)

C = 0.2/0.3 = 0.67 mol/L.

For (3), Number of moles of solute = 0.3 mole.

Read more about mole here:

https://brainly.com/question/15356425

#SPJ11

a. The rate law for the elementary step [tex]O_{3} + Cl[/tex] --> [tex]O_{2} + ClO[/tex] is k[[tex]O_{3}[/tex]][Cl], indicating that the reaction is bimolecular.

b. The rate law for the elementary step [tex]NO_{2}[/tex] + [tex]NO_{2}[/tex] --> [tex]NO_{3}[/tex] + NO is k[[tex]NO_{2}[/tex]]2, indicating that the reaction is termolecular.

c. The rate law for the elementary step 2NO + [tex]H_{2}[/tex] --> [tex]H_{2}O_{2}[/tex] + [tex]N_{2}[/tex] is k[NO][[tex]H_{2}[/tex]], indicating that the reaction is bimolecular.

The moleculаrity of а reаction refers to the number of reаctаnt pаrticles involved in the reаction. Becаuse there cаn only be discrete numbers of pаrticles, the moleculаrity must tаke аn integer vаlue. Moleculаrity cаn be described аs unimoleculаr, bimoleculаr, or termoleculаr. А unimoleculаr reаction occurs when а molecule reаrrаnges itself to produce one or more products. Аn exаmple of this is rаdioаctive decаy, in which pаrticles аre emitted from аn аtom.

А bimoleculаr reаction involves the collision of two pаrticles. Bimoleculаr reаctions аre common in orgаnic reаctions such аs nucleophilic substitution.  А termoleculаr reаction requires the collision of three pаrticles аt the sаme plаce аnd time. This type of reаction is very uncommon becаuse аll three reаctаnts must simultаneously collide with eаch other, with sufficient energy аnd correct orientаtion, to produce а reаction.

For more information about rate law refers to the link: https://brainly.com/question/8327819

#SPJ11

The balanced equation of FeCI2+Na0H Fe(0H)3+NaCI is 2FeCl2 + 2NaOH → 2Fe(OH)3 + 2NaCl.

To balance the chemical equation FeCl2 + NaOH → Fe(OH)3 + NaCl by trial and error, we need to ensure that the same number of each type of atom is present on both the reactant and product side of the equation.

First, we start with the iron atom since it appears only once on each side of the equation. To balance it, we need to add a coefficient of 2 in front of NaOH to get:

FeCl2 + 2NaOH → Fe(OH)3 + NaCl

Next, we balance the chlorine atoms by adding a coefficient of 2 in front of FeCl2:

2FeCl2 + 2NaOH → Fe(OH)3 + 2NaCl

Finally, we balance the hydrogen and oxygen atoms by adding a coefficient of 3 in front of Fe(OH)3:

2FeCl2 + 2NaOH → 2Fe(OH)3 + 2NaCl

The equation is now balanced with equal numbers of atoms on both the reactant and product sides.

Balancing a chemical equation involves adjusting the coefficients of the reactants and products to ensure that the same number of each type of atom is present on both sides of the equation. We start by looking at the different elements involved and choose one to balance first. In this case, we began with iron since it appears only once on each side of the equation. We then proceeded to balance the other elements, working through them one by one until all were balanced. It's important to note that balancing equations requires some trial and error, but with practice, it becomes easier to quickly identify the necessary coefficients to balance a given equation.

To know more about the Como, here

https://brainly.com/question/23435019

#SPJ4

Answer: B. Yes, CrPO4 will precipitate. In the given reaction: K3PO4 + Cr(NO3)3 → 3 KNO3 + CrPO4A precipitate is formed when two aqueous solutions are mixed that resulting in the formation of an insoluble compound.

The insoluble compound is called a precipitate. In the given reaction, K3PO4 and Cr(NO3)3 are the reactants. On mixing the two reactants, we can see that there are no common ions present in the reactants that could result in the formation of an insoluble compound. So, no precipitate is formed.

Based on solubility rules, CrPO4 is an insoluble compound. When K3PO4 reacts with Cr(NO3)3, it forms CrPO4. So, the precipitate that is formed is CrPO4. Hence, the correct option is B. Yes, CrPO4 will precipitate.

Read more about the topic of precipitation:

https://brainly.com/question/13877944

#SPJ11

Answer:

This is due to the very slow wobble of the axis of Earth. Which change is most likely to occur because of the movement of the axis? Winter and summer months will reverse

Explanation:

hope its help you

Answer:

Explanation: If the red litmus paper is inserted into the solution and the color remains unchanged, it indicates that the solution is likely a neutral solution or a solution with a pH close to 7. This means that it may contain either water or a salt solution.

To further confirm whether the solution contains a salt or water, we can perform a simple test using blue litmus paper. We can dip a blue litmus paper into the solution, and if it turns red, it indicates that the solution is acidic. If it remains blue, it indicates that the solution is basic.

If the blue litmus paper also does not change its color, it means that the solution is neutral or has a pH close to 7, which supports the possibility that the solution may contain either water or a salt solution.

To further test whether the solution contains a salt or not, we can perform a flame test. We can take a small amount of the solution and place it on a platinum wire loop and hold it in a Bunsen burner flame. If the flame produces a characteristic color, it indicates that the solution contains a salt. The characteristic color of the flame will depend on the metal ion present in the salt.

Overall, based on the initial test with the red litmus paper, the solution is likely neutral or close to neutral, and additional tests with blue litmus paper and flame test can be used to confirm whether the solution contains a salt or water.

Visio application element used to organize shapes into visual groups, also being affected when their shapes or elements are moved, copied, or deleted is called Grouping.

"Grouping" is an essential feature in the Microsoft Visio application that allows users to organize shapes into visual groups. With this feature, users can select multiple shapes and group them together, making them behave as a single entity. When one shape in the group is moved, copied, or deleted, the other shapes in the group are also affected.

This feature is particularly useful when creating complex diagrams or flowcharts, as it allows users to manipulate multiple shapes as a single unit. Overall, "Grouping" in Visio is a simple but powerful tool that helps users to organize and manage their shapes and diagrams with ease.

To know more about Visio, here

brainly.com/question/28002074

#SPJ4

--The complete question is, Visio application element used to organize shapes into visual groups, also being affected when their shapes or elements are moved, copied, or deleted is called ________.--

The correct electron geometry (eg) and molecular geometry (mg) for [tex]NH_3[/tex] is a. eg = tetrahedral, mg = trigonal pyramidal, [tex]sp^3[/tex].

Learn more about electron geometry: https://brainly.com/question/7283835

#SPJ11

c.) The layer of the Earth that is solid iron and nickel is the inner core, located at the center of the planet and surrounded by the liquid outer core, mantle, and crust.

The inner core of the Earth is made entirely of iron and nickel. The deepest part of the Earth is its inner core, which is situated at the planet's center. It has a radius of around 1,220 km and is mostly made of solid iron and nickel because of the intense pressure near the Earth's core. It is thought that the inner core of the sun is around 5,500°C hotter than the sun's surface. The liquid outer core, which is likewise made of iron and nickel, encircles the inner core. The Earth's crust is its outermost layer, while the mantle lies between it and the outer core.

learn more about solid iron here:

https://brainly.com/question/13827843

#SPJ4

Answer:

The number of protons in a water molecule (H2O) is equal to the number of hydrogen atoms in the molecule, which is 2. The molar mass of water is approximately 18.015 g/mol, which means that one mole of water contains Avogadro's number (6.022 x 10^23) molecules. Therefore, the number of protons in one mole of water is:

2 x 6.022 x 10^23 = 1.2044 x 10^24

To find the number of protons in 306 mL of water, we need to first convert the volume to moles. The density of water is approximately 1 g/mL, so the mass of 306 mL of water is:

306 mL x 1 g/mL = 306 g

The number of moles of water is then:

306 g / 18.015 g/mol = 16.991 mol

Multiplying this by the number of protons per mole, we get:

16.991 mol x 1.2044 x 10^24 protons/mol = 2.049 x 10^25 protons

Therefore, the answer is option D, 1 * 10 ^ 25

140.4 grams of dinitrogen pentoxide are produced from  104.0 grams of oxygen and 204.0 grams of nitrogen.

To calculate the mass of dinitrogen pentoxide that could be formed from 104.0 grams of oxygen and 204.0 grams of nitrogen, we need to use stoichiometry.

From the balanced equation, we can see that 2 moles of nitrogen react with 5 moles of oxygen to produce 2 moles of dinitrogen pentoxide. Therefore, we need to determine the limiting reactant in this reaction, which is the reactant that is completely consumed and determines the amount of product that can be formed.

To do this, we can calculate the number of moles of each reactant:

The ratio of moles of nitrogen to moles of oxygen is 7.29/3.25 ≈ 2.24/1. Therefore, oxygen is the limiting reactant because we need 5 moles of oxygen for every 2 moles of nitrogen.

Now we can use the amount of oxygen to calculate the amount of dinitrogen pentoxide that can be formed:

Finally, we can calculate the mass of dinitrogen pentoxide using its molar mass:

Therefore, 104.0 grams of oxygen and 204.0 grams of nitrogen can produce a maximum of 140.4 grams of dinitrogen pentoxide.

learn more about stoichiometry

https://brainly.com/question/14935523

#SPJ11

Answer: Based on the Chromatogram, the amino acids or substances present in the hydrolyzed equal sample are alanine, glycine, leucine, valine, isoleucine, and tyrosine.

Explanation:

Chromatogram is a graph or visual representation of the separated components of a mixture produced by chromatography. It provides information about the sample components, including their identity and relative amounts.

Based on the given chromatogram, Leucine, Tyrosine, and Phenylalanine amino acids or substances were present in the hydrolyzed equal sample. These amino acids are identified by their retention times, which can be compared to reference standards or databases to determine their identity.

Learn more about chromatogram here:

https://brainly.com/question/30914730

#SPJ11

The line spectrum observed for the hydrogen atom by Niels Bohr is significant because it provided evidence for the quantization of energy levels in atoms.

Bohr's model proposed that electrons in atoms occupy specific energy levels or orbits around the nucleus, and that they can only absorb or emit energy in discrete amounts as they transition between these energy levels. When an electron in hydrogen is excited to a higher energy level by absorbing energy, it eventually returns to its original energy level by emitting energy in the form of light, which is observed as the line spectrum.

However, the Bohr model had some inadequacies. It couldn't explain the spectral lines of atoms other than hydrogen, and it couldn't account for the fine structure of spectral lines due to electron spin. Also, the model violated the Heisenberg uncertainty principle, which states that it is impossible to simultaneously determine the exact position and momentum of an electron.

To calculate the energy required to excite a hydrogen electron from level n=1 to n=3, we can use the formula:

ΔE = E3 - E1 = (-13.6 eV/n²) [(1/3²) - (1/1²)]

where E1 and E3 are the energy levels corresponding to n=1 and n=3, respectively. Plugging in the values gives:

ΔE = (-13.6 eV/n²) [(1/3²) - (1/1²)] = (-13.6 eV) [(1/9) - 1] = 10.2 eV

Therefore, the energy required to excite a hydrogen electron from level n=1 to n=3 is 10.2 eV.

To know more about quantization click here:

brainly.com/question/17018137

#SPJ4

The mass of silver bromide formed when 35.5 ml of 0.184 m silver nitrate is treated with an excess of hydrobromic acid is 9.89 g.

When 35.5 mL of 0.184 M silver nitrate is treated with an excess of hydrobromic acid, the reaction forms silver bromide and a salt containing bromide ions. The mass of silver bromide that is formed can be calculated using the following equation:

Mass = Concentration x Volume x Molecular Weight

Where:

Therefore, the mass of silver bromide formed is:

Mass = 0.184 x 35.5 x 187.81 = 9.89 g

Learn more about acids: https://brainly.com/question/25148363

#SPJ11

The CNO cycle and the proton-proton chain don't release the same amount of energy per He nucleus produced.

Let's understand this in detail:

1. The CNO cycle produces more energy than the proton-proton chain per He nucleus produced. The proton-proton chain and CNO cycle produce energy by nuclear fusion in the sun's core.

2. In the core of the Sun, the proton-proton chain occurs. It converts four hydrogen nuclei (protons) into one helium nucleus via a series of nuclear reactions. This reaction liberates a significant amount of energy through gamma rays and neutrinos.

3. The CNO cycle also takes four hydrogen nuclei, producing one helium nucleus. The key difference between these two processes is the method in which helium is produced.

4. In the proton-proton chain, two protons combine to form deuterium. This then combines with another proton to form helium-3, and two helium-3 nuclei combine to form helium-4.

5. In the CNO cycle, hydrogen is fused with carbon, nitrogen, and oxygen isotopes to create helium. The CNO cycle releases more energy than the proton-proton chain per He nucleus produced because it has more intermediate steps.

5. The CNO cycle requires more heat and pressure to function because it involves carbon, nitrogen, and oxygen isotopes, which are heavier elements. The proton-proton chain is simpler because it only involves hydrogen and doesn't require as much energy.

Learn more about CNO cycle: What is the net equation for CNO cycle? https://brainly.com/question/19469825

#SPJ11

The relative rates of alkyl halides from fastest sn 1 to slowest sn1 mechanism is CH3 H3C. CH3 H3C. H₂C₂ CH3 CH3.

Alkyl halides can go through one of two different sorts of significant reactions: substitution or elimination.

Nucleophilic Substitution reaction occurs when the halogen at the alpha-carbon is replaced by a nucleophile after the electrophilic alkyl halide forms a new bond with it.

The SN1 reaction mechanism proceeds step-by-step, starting with the formation of the carbocation through the elimination of the leaving group. The nucleophile then attacks the carbocation. Ultimately, the protonated nucleophile is deprotonated to produce the desired product.

Alkenes are formed by the E1 mechanism while substitution products are produced by the Sn1 process.

The rate law in an SN1 reaction is first order. In other words, the concentration of just one component—the alkyl halide—determines the reaction rate.

To know about mechanism

https://brainly.com/question/27921705

#SPJ4

The Lewis structure for CO2 is:

O = C = O

The "e" notation typically refers to an electron, so it's unclear what is meant by "CO2 e". However, the total number of valence electrons for CO2 is 16.

The most polar bond without being considered ionic would be O-H.

Ionic bonds are the bond formed by the sharing of electrons between nonmetals to create a molecule that is neutral, while a covalent bond is a bond formed by the sharing of electrons between metals and nonmetals to create a molecule that is neutral.

Polar covalent bonds happen when there is an uneven distribution of electrons between two atoms that are bonded together. This is usually because the electrons are more strongly attracted to one atom over the other.

As a result, one atom will have a partial negative charge, and the other atom will have a partial positive charge.

In the water molecule, the O-H bond is polar because oxygen is more electronegative than hydrogen. Since the difference in electronegativity between hydrogen and oxygen is more significant than between the other atoms in the other bonds, the O-H bond is the most polar.

Learn more about polar bonds here:

https://brainly.com/question/29144393

#SPJ11

Sulfur and oxygen are the reactants in this process, and sulfur dioxide is the end result. Sulfur + Oxygen = Sulfur Dioxide is the word equation for this process.

Chemical equation writing. Sulfur trioxide is created when sulfur dioxide and oxygen are combined. Sulfur trioxide, often known as SO3, is the result of the reaction between sulfur dioxide and oxygen (SO2+O2).

This reaction is a combination reaction, which is the type of chemical reaction it is. Balanced Approaches: S and O2 combine to generate SO2 in this reaction of combination. Make sure the number of atoms on either side of the equation is equal by carefully counting them up.

To know more about reactants visit:-

https://brainly.com/question/17096236

#SPJ1

The answer is C) 0.5 kg. This is because Plutonium-238 has a half-life of 87.7 years, which means that after 87.7 years, half of the original amount of Plutonium-238 will remain. In this case, that would be 2 kg * 0.5 = 0.5 kg.

Plutonium-238 is a radioactive element used as a power source in spacecraft like Voyager and New Horizons. It has a half-life of 87.7 years. Suppose we have 2 kg of plutonium-238 right now. Radioactive decay is a random event. So, it is impossible to predict when a specific atom will decay. But we can find how much radioactive material is remaining after a specific period of time.

The half-life of a radioactive material is the time required for half of the radioactive material to decay. The formula to calculate the remaining material is:

N(t) = N0 × (1/2)^(t/t1/2)

Where N(t) is the remaining material at time t, N0 is the initial material, t1/2 is the half-life, and t is the elapsed time.

The initial material is 2 kg, half-life is 87.7 years, and the elapsed time is also 87.7 years.

N(87.7) = 2 kg × (1/2)^(87.7/87.7)= 1 kg × 0.5= 0.5 kg

Therefore, the amount of plutonium remaining after 87.7 years will be 0.5 kg. So, the answer is option C.

For more such questions on Plutonium , Visit:

https://brainly.com/question/13217330

#SPJ11

An object is said to be acted upon by an unbalanced force only when there is an individual force that is not being balanced by a force of equal magnitude and in the opposite direction.

An unbalanced force refers to a situation where the net force acting on an object is not equal to zero, which causes the object to accelerate in a particular direction. In other words, when the forces acting on an object are unbalanced, the object will either speed up, slow down, or change direction.

According to Newton's Second Law of Motion, the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. Therefore, when an unbalanced force acts on an object, it will experience an acceleration proportional to the force applied. an unbalanced force is a force that causes an object to accelerate in a particular direction due to an imbalance in the forces acting on it.

To learn more about Unbalanced force visit here:

brainly.com/question/30459051

#SPJ4

To titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

Titration is a technique used in analytical chemistry to determine the concentration of a specific analyte. The method involves the gradual addition of a standard solution to a sample containing the unknown analyte until the chemical reaction between the two is complete. The concentration of the unknown analyte can be calculated once this happens.

The balanced equation for the reaction between Na₂C₂O₄ and KMnO₄ is shown below:

5Na₂C₂O₄ + 2KMnO₄ + 8H₂SO₄ → 2MnSO₄ + 10CO₂ + 5Na₂SO₄ + 8H₂O

To titrate the given sodium oxalate solution, the volume of KMnO₄ needed must be determined. The molar mass of Na₂C₂O₄ is 134.00 g/mol.

Mass of Na₂C₂O₄ = 0.355 g

Moles of Na₂C₂O₄ = (0.355 g)/(134.00 g/mol) = 0.00265 mol

From the balanced equation, it can be seen that 2 moles of KMnO₄ are required to react with 5 moles of Na₂C₂O₄. As a result, the number of moles of KMnO₄ needed can be calculated.

Moles of KMnO₄ = (2/5) × 0.00265 mol = 0.00106 mol

The volume of 0.0100 M KMnO₄ needed can now be determined using the molarity equation.

Molarity (M) = moles (n) / volume (V)

n = M × V

V = n / M = 0.00106 mol / 0.0100 M = 0.106 L = 0.0234 L (to three significant figures)

Therefore, to titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

Learn more about Titration here: https://brainly.com/question/186765

#SPJ11

A photon of light has an energy of 3.977 x [tex]10^{-19}[/tex] joules and a wavelength of 0.050 centimetres.

The energy of a photon is related to its wavelength by the formula E = hc/λ, where E is the energy, h is Planck's constant (6.626 x [tex]10^{-34}[/tex] joule seconds), c is the speed of light (2.998 x [tex]10^{8}[/tex] meters per second), and λ is the wavelength of the photon.

To use this formula, we need to convert the wavelength of the photon from centimeters to meters, since c is given in meters per second. We can do this by dividing 0.050 cm by 100, which gives us 5.0 x [tex]10^{-4}[/tex]meters.

Now we can plug in the values we have into the formula: E = (6.626 x [tex]10^{-34}[/tex] joule seconds) x (2.998 x [tex]10^{8}[/tex] meters per second) / (5.0 x [tex]10^{-4}[/tex]meters)

Simplifying the equation, we get:

E = 3.977 x [tex]10^{-19}[/tex] joules

Therefore, a photon of light with a wavelength of 0.050 cm has an energy of 3.977 x [tex]10^{-19}[/tex] joules. It is important to note that photons are the smallest quantifiable packets of electromagnetic energy, and their energy is directly proportional to their frequency and inversely proportional to their wavelength.

To learn more about  wavelength refer to:

brainly.com/question/27353508

#SPJ4

The spectator ions in the reaction between silver nitrate and hydroiodic acid are nitrate ions (NO₃₋) and hydrogen ions (H⁺).

In order to identify the spectator ions in this reaction, we need to first write out the balanced chemical equation for the reaction:

AgNO₃(aq) + HI(aq) → AgI(s) + HNO₃(aq)

In this equation, the silver nitrate (AgNO₃) reacts with hydroiodic acid (HI) to produce a precipitate of silver iodide (AgI) and nitric acid (HNO₃).

The spectator ions are those ions that do not participate in the reaction, but remain in the solution unchanged. In this case, the nitrate ions (NO₃₋) from silver nitrate and the hydrogen ions (H⁺) from hydroiodic acid are the spectator ions, as they are present on both the reactant and product side of the equation.

In other words, the nitrate ions and hydrogen ions are not involved in the formation of the precipitate of silver iodide, and do not undergo any chemical change themselves.

Learn more about chemical reaction: https://brainly.com/question/11231920

#SPJ11

Answer : The ratio of the masses of NH3 to NH4Cl required to make the buffer is 1.6 x 10^4 : 1.

The buffer system is one of the most important chemical systems. They are usually composed of a weak acid and a salt of its conjugate base or a weak base and a salt of its conjugate acid. The buffer capacity is important as it helps to resist changes in pH. The Henderson-Hasselbalch equation can be used to calculate the pH of the buffer system.

It's given by: pH = pKa + log [A-] / [HA]Here, NH3 is the weak base and NH4Cl is the salt of its conjugate acid. NH3 + H2O <--> NH4+ + OH- NH4Cl <--> NH4+ + Cl-By combining the above equations, the ratio of the masses of NH3 and NH4Cl can be found as shown below. pH = pKb + log [salt] / [base] pH = 5.09 + log [NH4Cl] / [NH3]pH = 8.95, pKb of NH3 = 4.74Therefore, 8.95 = 4.74 + log [NH4Cl] / [NH3] 4.21 = log [NH4Cl] / [NH3] [NH4Cl] / [NH3] = antilog (4.21) [NH4Cl] / [NH3] = 1.6 x 10^4

Therefore, the ratio of the masses of NH3 to NH4Cl required to make the buffer is 1.6 x 10^4 : 1.

Know more about buffer system here:

https://brainly.com/question/22821585

#SPJ11

A) The solute in tank B will dissolve first, is the key response.Temperature, pressure, and concentration are only a few examples of the variables that affect a solute's solubility in a solvent. As the water in both tanks A and B is originally pure.

in this instance the solute in tank B will dissolve first due to its larger concentration than in tank A. The concentration gradient between the solute and the water narrows as the solute in tank B dissolves and diffuses into the surrounding water, slowing the rate of dissolution. The solute in tank A will also eventually dissolve, but because of its lower initial concentration, it will do so more gradually.I am unable to tell which solute will dissolve first because the relevant illustration is not given. However, a number of variables, including temperature, pressure, and the chemical makeup of the solute and solvent, affect how soluble a solute is in a solvent. The solute that is more soluble in the given solvent will often dissolve first. It is impossible to predict which solute will dissolve first without more details or context.

learn more about solute in tank  here:

https://brainly.com/question/9589556

#SPJ4

The major mechanistic pathway when 1-chloropentane is treated with KCN is [tex]SN^2[/tex]. So, the correct option is d.

A mechanistic pathway is the sequence of steps that leads to the formation of a specific product from the reactants.

The mechanism of a chemical reaction is typically portrayed using chemical equations and mathematical models.

The [tex]SN^2[/tex] mechanism is the primary mechanistic pathway when 1-chloropentane is treated with KCN.

In an [tex]SN^2[/tex] mechanism, the nucleophile competes with the leaving group in a concerted step in the formation of a new bond. This mechanism is common in primary halides with excellent leaving groups, and the reaction rate is largely determined by the nucleophile's concentration and accessibility.  

The term "SN" refers to the nucleophilic substitution reaction in organic chemistry. It stands for "Substitution Nucleophilic."

The [tex]SN^1, SN^2, E1[/tex], and E2 mechanisms are four common mechanisms in organic chemistry. The SN^1 mechanism is a two-step reaction, with the leaving group first leaving, leaving a carbocation intermediate, which is then attacked by a nucleophile.

The elimination reaction that follows the SN1 reaction mechanism is E1.

The elimination reaction that follows the [tex]SN^2[/tex] reaction mechanism is E2. Therefore, the correct option is d.

Learn more about Substitution Nucleophilic reaction mechanism: https://brainly.com/question/30631335

#SPJ11

A k− ion is a potassium ion that has lost one electron, therefore the full electron configuration is 1s² 2s² 2p² 3s² 3p⁶

To write an electron configuration, follow these steps:

The electron configuration for a neutral potassium atom is:

1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹

When one electron is removed from the outermost shell, the electron configuration becomes:

1s² 2s² 2p⁶ 3s² 3p⁶

Learn more on electron configuration here: https://brainly.com/question/26084288

#SPJ1

The correct answer is (B) 2NO(g) + Cl2 (g) + 2NOCI (8). Increasing the total pressure on the reaction mixture will increase the yield of products. For the second question, the correct answer is (E) 7 x 102. Kp for the molar solubility of magnesium carbonate is 3.6 x 10-4.

Chemical equilibrium refers to the situation in a chemical reaction where both the reactants and products are present in concentrations that have no further tendency to change over time, preventing any discernible change in the system's properties. When the forward reaction and the reverse reaction go forward at the same speed, this condition results. The forward and backward reactions typically have equal, if not zero, reaction rates. The concentrations of the reactants and products do not change on a net basis as a result. Dynamic equilibrium is the name given to such a situation.

The reaction's Gibbs free energy, G, must be taken into account at constant temperature and pressure. The Helmholtz free energy, A, must be taken into account at constant temperature and volume. The reaction's entropy, S, must be taken into account at constant internal energy and volume.

In geochemistry and atmospheric chemistry, where pressure changes are considerable, the constant volume case is crucial.

It is thought about the case of constant pressure. By taking into account chemical potentials, the relationship between the Gibbs free energy and the equilibrium constant can be discovered.

The Gibbs free energy for the reaction, G, under constant temperature and pressure in the absence of an applied voltage, depends only on the degree of the reaction: (Greek letter xi), and can only decrease in accordance with the second law of thermodynamics. That indicates that if the reaction occurs, the derivative of G with respect to must be negative; at equilibrium, this derivative equals zero.

For more such questions on pressure , Visit:

https://brainly.com/question/24719118

#SPJ11