PLEASE HELP WITH THIS QUESTION

What of Newton's 3 laws is represented in this picture?​

Answer:

The electromagnetic theory of light , that's the answer

Answer:

the electromagnetic theory of light

Explanation:

got it right on o.w

Complete question:

(b) How much energy must be supplied to boil 2kg of water? providing that the specific latent heat of vaporization of water is 330 kJ/kg. The initial temperature of the water is 20 ⁰C

Answer:

The energy that must be supplied to boil the given mass of the water is 672,000 J

Explanation:

Given;

mass of water, m = 2 kg

heat of vaporization of water, L =  330 kJ/kg

initial temperature of water, t = 20 ⁰C

specific heat capacity of water, c = 4200 J/kg⁰C

Assuming no mass of the water is lost through vaporization, the energy needed to boil the given water is calculated as;

Q = mc(100 - 20)

Q = 2 x 4200 x (80)  

Q = 672,000 J

Q = 672,000 J

Q = 672,000 J

Therefore, the energy that must be supplied to boil the given mass of the water is 672,000 J

Answer:

4. the feather experiences more fluid friction than the ball

Answer:

44.1 m

Explanation:

Consider the displacement being x:

x = (g•t²)/2

x = (9.8•3²)/2

x = (9.8•9)/2

x = 88.2/2

x = 44.1 m

Answer:

Explanation:

that's the correct answer

Answer:

it is maybe A but i'm not 100% sure

Explanation:

its the only one that is mixed

Explanation:

An oven thermostat regulates the temperature inside an oven. The thermostat's temperature-sensitive probe measures the oven's warmth, switching the heat on and off as necessary to maintain the correct temperature.

Answer:

Equal to the frictional force

Explanation:

Question; The options given with regards to a similar question posted online are;

A. Equal (equivalent) to the frictional force

B. Larger than the frictional force

C. Equal to the object's weight

D. More than the object's weight

Explanation

According to Newton's first law of motion, every object shall remain at rest or continue moving with uniform (constant speed) motion unless there is a net force acting on the object

Given that the velocity of the massive block, lying on the surface that has friction, being pulled by the rope = Constant

Therefore;

The net force acting on the moving block while being pulled by the rope = 0

From which we have;

The pulling force = The resistive force

Where;

The pulling force = The (pulling) force (applied) on the rope

The resistive force = The frictional force of the surface which tends to prevent the motion of the block

Therefore, given that the net force acting on the block = 0

The force on the rope = The frictional force (of the surface)

The correct option is option A. Equal to the frictional force.

Answer:

40000 N/m²

Explanation:

Applying,

P =  F/A................... Equation 1

Where P = Pressure, F = Force, A = Area.

From the question,

The force(F) exerted by the person's foot is thesame as it's weight.

F = W = mg............ Equation 2

Where m = mass of the person, g = acceleration due to gravity.

Substitute equation 2 into equation 1

P = mg/A................ Equation 3

Given: m = 60 kg, g = 10 m/s², A = 150 cm² = (150/10000) m² = 0.015 m²

Substitute these values into equation 3

P = (60×10)/0.015

P = 600/0.015

P = 40000 N/m²

Answer:

.04 kg m/s

Explanation:

Momentum is simply mass multiplied by velocity given by p = mv. You can consider momentum as mass in motion.

Before the collision, the data given for the toy train:

v = 0.5m/s

m = 75g

We need to convert grams into the SI unit of mass, kg.

75g / 1000g * 1kg = 0.075kg

Using p = mv, we can determine:

p = 0.075kg * 0.5m/s = 0.0375 kg m/s

Rounding to the value of 1 sig-fig, it comes out to be 0.04 kg m/s.

Answer:

Which best describes the electric field created by a positive charge? ... Its rays point toward the charge.

Explanation:

thank me later

Answer:a gas at pressure of 0.8 m column of H g

Answer:

the power output P = 1484 W

Explanation:

Power P  = Force× speed

Given that motor of a battery-powered scooter can maintain a speed of 5.3 m/s by providing a force of 280 N.

Therefore,the power output of the motor P = 280×5.3 = 1484 W

Hence, the power output P = 1484 W

Answer:

The velocity increases as the inclination increases.

Explanation:

hen a block moves downwards along the inclined plane, the viscous property of the fluid between the block and the inclined acts and thus there is a friction between the block and surface.  

When gravitational force acting along the plane provides the acceleration of the block.

When  the angle of inclination increases, the acceleration along the plane increases and thus the velocity increases.

Answer:

R = 4.77 ohms

Explanation:

Four resistors are given such that,

R₁ = 2 ohms

R₂ = 3 ohms

R₃ = 5 ohms

R₄ = 10 ohms

Here, R₁ and R₂ in series. The equivalent is given by :

R₁₂ = R₁ + R₂

= 2 + 5

R₁₂ = 7 ohms

Similarly, R₃ and R₄ are in series. so,

R₃₄ = R₃ + R₄

= 10+5

R₃₄ = 15 ohms

Now, R₁₂ and R₃₄ are in parallel. So,

[tex]\dfrac{1}{R}=\dfrac{1}{R_{12}}+\dfrac{1}{R_{34}}\\\\\dfrac{1}{R}=\dfrac{1}{7}+\dfrac{1}{15}\\\\R=4.77\ \Omega[/tex]

So, the equivalent resistance s 4.77 ohms.

c- temperature

The speed of sound increases with increasing temperature .

The average velocity is 25 mph north.

Average velocity = displacement/time

Displacement =

(400 mi north) + (275 mi south)

Displacement = 125 mi north

Average V = (125 mi north) / 5 hours.

Average V = 25 mph north

Answer:

B= 4 A=5

Explanation:

Answer:

6.86 N

Explanation:

Applying,

F = mg............... Equation 1

Where F = Force exerted by gravity on the mass, m = mass, g = acceleration due to gravity

Note: The Force exerted by gravity on the mass is thesame as the weight of the body.

From the question,

Given: m = 700 g = (700/1000) = 0.7 kg

Constant: g = 9.8 m/s²

Substitute these values into equation 1

F = 9.8(0.7)

F = 6.86 N

Answer:

hi i only dont understand want ur saying

Option C: Later in the day, less power is developed in lifting each box

Answer:

Later in the day, less power is developed in lifting each box.

power= workdone÷time

Answer:

Nitric acid, also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water.

Explanation:

Good morning...

Nitric acid production is mainly driven by fertilizer industry. Nitric acid is used in the production of ammonium nitrate and calcium ammonium nitrate which find applications as fertilizers.

Answer:

the correct address is B

In Rutherford's model of the atom, the positive charge is concentrated at the center of the atom.

The model described the atom as a tiny, dense, positively charged core called a nucleus, in which nearly all the mass is concentrated, around which the light, negative constituents, called electrons, circulate at some distance, much like planets revolving around the Sun.

To learn more about Rutherford's model here

https://brainly.com/question/11749615

#SPJ2

Answer:

Explanation:

PE = mgh where m is mass, g is the pull of gravity, and h is the height to which the object can possibly fall.

PE = 3.0(-9.8)(-12.4) so

PE = 360 J, rounded to the correct number of sig figs.

The gravitational potential energy of the rock is 362.4 joules.

The gravitational potential energy of an object is given by the formula:

PE = mgh

where PE is the potential energy, m is the mass of the object, g is the acceleration due to gravity (which is approximately 9.81 m/s^2 near the surface of the Earth), and h is the height of the object above a reference point.

In this case, the mass of the rock is 3.0 kg, the height above the ground is 12.4 m, and the acceleration due to gravity is 9.81 m/s^2. Substituting these values into the formula, we get:

PE = (3.0 kg) x (9.81 m/s^2) x (12.4 m) = 362.4 J

Therefore, the gravitational potential energy of the rock is 362.4 joules.

To learn about universal gravitation constant click:

https://brainly.com/question/858421

#SPJ3

Answer:

Option 1 is endothermic

Option 2 is exothermic

Explanation:

In Chemistry, Exothermic reactions are reactions whereby heat energy is transferred to the surroundings and the temperature of the surroundings increases. Endothermic reactions are those whereby heat energy from the surroundings is absorbed and thereby making the temperature of the surroundings to decrease.

This means in simple terms that endothermic reactions will have heat on the reaction side of the equation while exothermic will have heat on the product side of the equation.

Thus;

Option 1 is endothermic since it has heat absorbed on the reactant side.

Option 2 is exothermic since it gives off heat on the product side.

Answer:

D. Frequency

Explanation:

The energy of an  electromagnetic wave is proportional to frequency, mathematically it is expressed as;

E ∝ f

E = hf

where;

h is Planck's constant = 6.626 x 10⁻³⁴ Js

The equation above can also be expanded to;

[tex]E = hf = h \frac{c}{\lambda}[/tex]

where;

c is speed of light = 3 x 10⁸ m/s

λ is the wavelength of the electromagnetic wave

Since the speed of light is constant, we can conclude that the energy of the electromagnetic wave is directly proportional to its frequency and inversely proportional to its wavelength.

Therefore, the correct option for direct proportionality is FREQUENCY

Answer:

HOPE IT HEPLED U !!!!

Explanation:

i think it's (C) They have different units ....

Answer:

I think C

Explanation:

If im right give brainliest :)

Answer:While walking, one foot is in contact with the ground at a time. The surface area of one foot is less than two feet. Therefore, the pressure is more than the pressure exerted while standing, as the surface area of both feet is more.

Answer:

momentum (d) it's s preety easy haaaaaaaa