Acids have sour taste, low pH and dissolves metals.
The list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.
Characteristics of an acidAn acid is a chemical substance that has the ability to donate hydrogen ions when involved in a chemical reaction.
The following are the characteristics or features of an acid:
They have a sour taste when tasted.When measured using a pH scale it is less than 7(low pH).They react with active metals to yield hydrogen gas.Therefore, the list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.
Learn more about acids here:
https://brainly.com/question/1302816
Question 1 Points 3 23 and Louis immerses his left hand in a beaker containing cold water and immerses his right hand in a beaker containing warm water. Then, he immerses both his hands on a beaker containing water at room temperature. Which of the following statements are true? 1. The hand that was in hot water would feel cold. 2. The hand that was in cold water would feel hot. 3. His two hands will feel the same hotness. Que O2 and 3 0 1 and 2 o 1 and 3 1.2, and 3
Answer:look down below
Explanation:
The statements that are true about hands that are immersed in the water are:
1. The hand that was in hot water would feel cold.
2. The hand that was in cold water would feel hot.
The correct option is B 1. and 2.
What is temperature?
Temperature is the measurement of the hotness or coldness of any object. It is measured in Celsius or kelvin. Our body has nerves that feel the different temperatures of any object. The high temperature is called hot and the low temperature is called cold.
When Louis put his hand in the warm water and one hand in the cold water. He feels the temperature of both glasses of water. Then he put both hands in the normal water.
So the hand that is warm would feel the water as cold and the hand with cold water would feel the water as hot.
Thus, the correct option is B. 1. and 2.
Learn more about temperature, here:
https://brainly.com/question/15267055
#SPJ5
When electrons in a molecule are not found between a pair of atoms but move throughout the molecule, this is called Group of answer choices
Answer:
delocalised electrons
Explanation:
they are called delocalised electrons because that can move freely in the molecule
Water has a density of 1.00 g/mL. If you put an object that has a density of 0.79 g/mL into water, it will sink to the
bottom.
ANSWER:
True
False
Answer:
False
Explanation:
An object with a density greater than 1.00g/mL (greater than the density of water) will sink. An object with a density less than the density of water, will float.
If the water has a density of 1.00 g/mL. If you put an object that has a density of 0.79 g/mL into water, it will sink to the bottom, this statement is false.
What is density?The density of an actual content is its mass per unit volume. The most common symbol for density is d, but the Latin letter D can also be used.
Three of an object's most fundamental properties are mass, volume, and density. Mass describes how heavy something is, volume describes its size, and density is defined as mass divided by volume.
The density of something is a measure of how heavy it is in relation to its size. When an artifact is more dense than water, it plunges; when an object is less dense than water, it floats.
Density is a property of a substance that is independent of the amount of substance.
As in the given scenario, water is having density 1 g/mL and object in having density less then it so it will float on water.
Thus, the given statement is false as the material will not sink, rather it will float on water.
For more details regarding density, visit:
https://brainly.com/question/15164682
#SPJ2
In the reactionpyruvate lactatethat is catalyzed by the enzyme lactate dehydrogenase, the compound on which the enzyme works, pyruvate, is called the _______.
Answer:
Substrate
Explanation:
In biochemical sciences, a substrate is a substance that is acted upon by an enzyme to yield a product. Enzymes are known for catalyzing biochemical reactions. The substances that are usually worked with during this catalytic process are termed as SUBSTRATES.
Substrates, which are usually changed during the process, binds to the active site on the enzyme and form an enzyme-substrate complex.
According to this question, pyruvate is converted to lactate in a reaction that is catalyzed by the enzyme lactate dehydrogenase. This means that the compound on which the enzyme works, pyruvate, is called the SUBSTRATE.
How many moles of carbon dioxide at STP will fit in a 50 liter container?
Answer:
n = 2.23 moles
Explanation:
Given the following data;
Standard temperature = 273 K
Standard pressure = 101.325 kPa
Volume = 50 liter
R = 8.314 J/mol·K
To find the number of moles, we would use the ideal gas law formula;
PV = nRT
Where;
P is the pressure.V is the volume.n is the number of moles of substance.R is the ideal gas constant.T is the temperature.Making n the subject of formula, we have;
[tex] n = \frac {PV}{RT} [/tex]
Substituting into the formula, we have;
[tex] n = \frac {101.325*50}{8.314*273} [/tex]
[tex] n = \frac {5066.25}{2269.722} [/tex]
n = 2.23 moles
Therefore, 2.23 moles of carbon dioxide at STP will fit in a 50 liter container.
g in the following three compounds(1,2,3) arrange their relative reactivity towards the reagent CH3Cl / AlCl3. Justify your order
Answer:
3 > 2> 1
Explanation:
Aromatic compounds undergo electrophilic substitution reaction with several electrophiles.
Some substituted benzenes are more reactive towards electrophilic aromatic substitution than unsubstituted benzene.
Certain groups of substituents increase the ease with which an aromatic compound undergoes aromatic substitution.
If we look at the compounds closely, we will notice that only toluene leads to easy reaction with CH3Cl / AlCl3. Thus is due to the +I inductive effect of -CH3 which stabilizes the negatively charged intermediate produced in the reaction.
howtocalculatethevolumeofcarbondioxideproducedwhen400gofmarblewereats.t.p
Answer:
so 0.15 moles X 22.4 dm3/mole=3.36 dm3. Next we find the moles of hexane combusted, and then the moles of CO2. Finally, we find the volume of CO2 using the fact that at STP, 1 mole of gas = 22.4 dm3.
determine the number of moles of Cl in 1.9 mol of CaCl2
Explanation:
In the formula of [tex]CaCl_2[/tex] we can see that there are 2mol Cl in 1 molecule of CaCl2. So, now we can do some math to find out how many mol of Cl there are in 1.9mol CaCl2!
[tex]1.9molCaCl_2*\frac{2molCl}{1molCaCl_2}[/tex]
So, there are 3.8mol Cl
Based on the equations below, which metal is the least active? Pb(NO3)2(aq) + Ni (s) --> Ni(NO3)2 (aq)+ Pb(s) Pb(NO3)2(aq) + Ag(s) --> No reaction Cu(
Answer:
Ni
Explanation:
An active metal is a highly reactive metal. Active metals are found high up in the activity series.
Active metals react with other metals that are lower than them in the activity thereby displacing the lower metals from a solution of their salts. This is what may have happened in the other two reactions.
Ni is the most active metal listed in the question since it can react a compounds with Pb(NO3)2(aq) to liberate Pb metal.
Classify each of the following as either macroscopic, microscopic or particulate:
a. a red blood cell.
b. a sugar molecule.
c. baking powder.
Answer:
Classify each of the following as either macroscopic, microscopic or particulate:
a. a red blood cell.
b. a sugar molecule.
c. baking powder.
Explanation:
a. A red blood cell is a microscopic particle.
It can be viewed under a microscope.
b. A sugar molecule is also a microscopic substance.
It can be viewed under a microscope.
c. Baking powder is macroscopic substance.
The length of a covalent bond depends upon the size of the atoms and the bond order.
a. True
b. False
Answer:
True
Explanation:
The length of covalent bond depends upon the size of atoms and the bond order.
an emerald can be described as...
Answer:
green gemstone
Explanation:
hope this helps someone
Question 16(Multiple Choice Worth 5 points)
(04.01 LC) Which statement is true about the total mass of the reactants during a chemical change?
O It is destroyed during chemical reaction.
O It is less than the total mass of the products. O It is equal to the total mass of the products.
O It is greater than the total mass of the products.
Answer:
It is equal to the total mass of the products.
Explanation:
Hope this helps :)
How many molecules in each sample?
64.7 g N2
83 g CCl4
19 g C6H12O6
Answer:
1.39x10²⁴ molecules N₂.25x10²³ molecules CCl₄6.38x10²² molecules C₆H₁₂O₆Explanation:
First we convert the given masses into moles, using the compounds' respective molar mass:
64.7 g N₂ ÷ 28 g/mol = 2.31 mol N₂83 g CCl₄ ÷ 153.82 g/mol = 0.540 mol CCl₄19 g C₆H₁₂O₆ ÷ 180 g/mol = 0.106 mol C₆H₁₂O₆Then we multiply each amount by Avogadro's number, to calculate the number of molecules:
2.31 mol N₂ * 6.023x10²³ molecules/mol = 1.39x10²⁴ molecules0.540 mol CCl₄ * 6.023x10²³ molecules/mol = 3.25x10²³ molecules0.106 mol C₆H₁₂O₆ * 6.023x10²³ molecules/mol = 6.38x10²² moleculesdefine saturated and unsaturated fats
Explanation:
Saturated fats are defined as the fat where fatty acid chains contain only single bonds.
For example, stearic acid, palmitic acid etc.
Unsaturated fats are defined as the fat where fatty acids contain one or more number of double bonds on the carbon atoms.
For example, oleic acid, palmitoleic acid etc.
what class of organic compound is formed when cyclopentanone reacts with ethylamine in the presence of trace acid
The question is incomplete, the complete question is;
What functional group results when cyclopentanone reacts with ethylamine in the presence of trace acid? A) cyanohydrin B) semicarbazone C) imine D) enamine E) oxime
Answer:
imine
Explanation:
An imine is an unsaturated amine. An imine contains the carbon- nitrogen double bond.
Imines are obtained when a carbonyl compound is condensed with NH3 or an amine. The reaction involves several steps in its mechanism.
Since cyclopentanone is a ketone (carbonyl compound) and ethylamine is an amine,in the presence of trace acid, condensation of the two compounds occur to yield an imine
4019K Express your answer as a nuclear equation.
Answer:
[tex]_{19} ^{40} K[/tex] → [tex]_{20} ^{40} Ca[/tex] + [tex]_{-1} ^{0} e[/tex] + ¯v
Explanation:
[tex]_{19} ^{40} K[/tex] is an unstable potassium isotope which has the capacity to undergo beta decay. During the decay process, it transforms to calcium atom with a release of beta particle and an antineutrino.
The required nuclear equation is:
[tex]_{19} ^{40} K[/tex] → [tex]_{20} ^{40} Ca[/tex] + [tex]_{-1} ^{0} e[/tex] + ¯v
The calcium formed due to this process is a stable atom.
viagnesiumi anu
If I have 100g of Magnesium, how much Magnesium Nitride will I theoretically create?
O 24.3g Mg3 N2
O 138.4g Mg3 N2
415.2g Mg3 N2
O 200g Mg3 N2
Answer:
Theoretical yield is 138.4 g
Explanation:
In the first step we determine the reaction:
3Mg + N₂ → Mg₃N₂
Mass of reactant is 100 g. We assume the nitrogen is in excess, so we work with Mg. We convert mass to moles:
100 g . 1mol/ 24.3g = 4.11 moles of Mg.
Ratio is 3:1. 3 moles of Mg can produce 1 mol of nitride
Our 4.11 moles, may produce (4.11 . 1)/3 = 1.37 moles of Mg₃N₂
We convert mass to moles, to find the theoretical yield:
1.37 mol . 100.9 g/mol = 138.2 g
determine the budget for tge fitness event.consider the attendance (should tou ask for registration fee.give shirts etc)
A
(c) 2 C(s) + MnO2(s)
Mn(s) + 2 CO(g)
O combination reaction
O decomposition reaction
O combustion reaction
O single-displacement reaction
Answer: The reaction, [tex]2C(s) + MnO_{2}(s) \rightarrow Mn(s) + 2CO(g)[/tex] is a single-displacement reaction.
Explanation:
A chemical reaction in which one element of a compound is replaced by another element participating in the reaction.
For example, [tex]2C(s) + MnO_{2}(s) \rightarrow Mn(s) + 2CO(g)[/tex]
Here, the element manganese is replaced by carbon atom. As only one element gets replaced so, it is a single-displacement reaction.
Thus, we can conclude that [tex]2C(s) + MnO_{2}(s) \rightarrow Mn(s) + 2CO(g)[/tex] is a single-displacement reaction.
I need help solving this!
For the reaction C + 2H2 → CH4, how many moles of hydrogen are needed to make 146.6 grams of methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Carbon
12
Answer: Moles of hydrogen required are 4.57 moles to make 146.6 grams of methane, [tex]CH_{4}[/tex].
Explanation:
Given: Mass of methane = 146.6 g
As moles is the mass of a substance divided by its molar mass. So, moles of methane (molar mass = 16.04 g/mol) are calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{146.6 g}{16.04 g/mol}\\= 9.14 mol[/tex]
The given reaction equation is as follows.
[tex]C + 2H_{2} \rightarrow CH_{4}[/tex]
This shows that 2 moles of hydrogen gives 1 mole of methane. Hence, moles of hydrogen required to form 9.14 moles of methane is as follows.
[tex]Moles of H_{2} = \frac{9.14}{2}\\= 4.57 mol[/tex]
Thus, we can conclude that moles of hydrogen required are 4.57 moles to make 146.6 grams of methane, [tex]CH_{4}[/tex].
Calculate the moment of inertia of a CH³⁵CL₃ molecule around a rotational axis that contains the C-H bond. The C-Cl bond length is 177pm and the HCCl angle is 107⁰f
Answer:
The correct answer is "[tex]4.991\times 10^{-45} \ kg.m^2[/tex]".
Explanation:
According to the question,
[tex]R_{C-Cl} = 177 \ pm[/tex]
or,
[tex]=1.77\times 10^{-10} \ m[/tex]
[tex]\alpha = 107^{\circ}[/tex]
[tex]m_{Cl}=34.97 \ m.u[/tex]
or,
[tex]=34.97\times 1.66\times 10^{-27}[/tex]
[tex]=5.807\times 10^{-26} \ kg[/tex]
The moment of inertia around the rotational axis will be:
⇒ [tex]I=3\times m_{Cl}\times (R_{C-Cl})^2 \ Sin^2 \alpha[/tex]
By putting the values, we get
[tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2 \ Sin^2 (107)[/tex]
[tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2\times 0.91452[/tex]
[tex]=4.991\times 10^{-45} \ kg.m^2[/tex]
Predict the products of below reaction, and whether the solution at equilibrium will be acidic, basic, or neutral.
N2O5 + 3H2O → __________
Answer: The product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.
Explanation:
When two or more chemical substances react together then it forms new substances and these new substances are called products.
For example, [tex]3N_{2}O_{5} + 3H_{2}O \rightarrow 6HNO_{3}[/tex]
This shows that nitric acid [tex](HNO_{3})[/tex] is the product formed and it is an acidic substance.
Hence, the solution at equilibrium will be acidic in nature.
Thus, we can conclude that the product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.
Match the description with the type of precipitation being described.
1. Its formation requires very strong updrafts
2. Its formation requires falling through a layer of above freezing air
3. Precipitation from cumuliform clouds is typically of this nature
4. Precipitation from stratus clouds is typically of this nature
Options:
a. Hail
b. Drizzle
c. Shower
d. Freezing Rain
Answer:
1. Its formation requires very strong updrafts = a. Hail
2. Its formation requires falling through a layer of above-freezing air = d. Freezing Rain
3. Precipitation from cumuliform clouds is typically of this nature = c. Shower
4. Precipitation from stratus clouds is typically of this nature = Drizzle
Explanation:
Hail formation requires very strong updrafts, these updrafts are the upward moving air created in a thunderstorm. This period of noticeable thunderstorms creates hails.
Freezing rain requires the presence of warm air, it requires falling through a layer of above-freezing air to the colder air below to produce an ice coating on anything it drops on.
Showers are produced by cumuliform clouds which look like cotton balls. Since cumuliform clouds precipitate too, these clouds can have fluctuating rain in a day in the form of showers.
Drizzle which raises low visibility is considered a type of liquid precipitation since it also falls from a cloud. Drizzle which is obviously smaller in diameter when compared to that of raindrops, however, is common with stratus clouds.
A 1.5-m 3 insulated rigid tank contains 2.7 kg of carbon dioxide at 100 kPa. Now paddle-wheel work is done on the system until the pressure in the tank rises to 150 kPa. Determine the entropy change of carbon dioxide during this process. Assume constant specific heats
Answer:
The entropy change of carbon dioxide = 0.719 kJ/k
Explanation:
Given:
1.5 m - 3 insulated rigid tank contains 2.7 kg of carbon dioxide at 100 kPa
The objective is to determine the entropy change of carbon dioxide
Formula used:
ΔS=
Solution:
On considering,
[tex]C_{P} =0.846 kJ/kg K\\C_V=0.657 kJ/kg k\\[/tex]
ΔS=[tex]mc_{v} lu\frac{p_{2} }{P_{1} }[/tex]
On substituting the values,
ΔS=[tex]2.7*0.657lu\frac{150}{100}[/tex]
ΔS=0.719 kJ/k
The entropy change is "0.719 kJ/K".
Given values are:
Mass of tank,
m = 2.7 kgPressure,
P₁ = 100 kPaRised pressure,
P₂ = 150 kPaAssumption of constant specific heat is,
[tex]C_v = 0.657 \ kJ/kgK[/tex]As we know the formula,
→ [tex]\Delta S = mC_v \ ln(\frac{P_2}{P_1} )[/tex]
[tex]= (2.7)(0.657) \ ln (\frac{150}{100} )[/tex]
[tex]= 1.7739\times 0.4055[/tex]
[tex]= 0.7193 \ kJ/K[/tex]
Thus above answer is right.
Learn more:
https://brainly.com/question/20340354
Please help me ASAP I’ll mark Brainly
Answer:
cell
chloroplast and cell wall
nucleus
life processes
cell membrane
shape and size
vacuole
Hope it helps
the pressure of a sample of helium in a 0.150 L container is 1520 torr. if the helium is compressed to the volume of 0.012 L without changing the temperature what would be the pressure of the gas
Answer:
19000 torr
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 0.150 L
Initial pressure (P₁) = 1520 torr
Final volume (V₂) = 0.012 L
Temperature = constant
Final pressure (P₂) =?
The final pressure of the gas can be obtained by using the Boyle's law equation as illustrated below:
P₁V₁ = P₂V₂
1520 × 0.150 = P₂ × 0.012
228 = P₂ × 0.012
Divide both side by 0.012
P₂ = 228 / 0.012
P₂ = 19000 torr
Thus, the final pressure of the gas is 19000 torr
One main difference between the heating of gases on the one hand and solids or liquids on the other is that ___________________. One main difference between the heating of gases on the one hand and solids or liquids on the other is that ___________________. heating of gases depends not only on the temperature difference, but also on the process as well as the amount of gas present. heating of gases depends on temperature difference as well as the amount of gas present. specific heat is not defined for gases. heat cannot be exchanged with gases.
Answer:
heating of gases depends not only on the temperature difference, but also on the process as well as the amount of gas present.
Explanation:
The work done when a gas is heated does not only depends on the initial and final states of the gas but also on the process used to achieve the change of state of the gas.
Several processes can be applied in changing the state of a gas such as; adiabatic process, isobaric process, isochoric process and isothermal process.
Hence, the heating of a gas, depends not only on the temperature difference, as well as the amount of gas present according to the ideal gas laws but also on the process used to achieve the change of state.
The data shows the number of years that 30 employees worked for an insurance company before retirement. is the population mean for the number of years worked, and % of the employees worked for the company for at least 10 years. (Round off your answers to the nearest integer.)
Answer:
14
73%
Explanation:
The mean Number of years worked :
. (sum of service years) / employees in the
(8+13+15+3+13+28+4+12+4+26+29+3+10+3+17+13+15+15+23+13+12+1+14+14+17+16+7+27+18+24) /
(417 / 30)
= 13.9 years
= 14 years
The percentage of employees who have worked for atleast 10 years :
Number of employees with service years ≥ 10 years = 22 employees
Total number of employees
Percentage (%) = (22 / 30= * 100% = 0.7333 * 100% = 73.33% = 73%
What does the term spontaneous mean in chemical reactions?
A. Producing heat as a product
B. Occurring without added energy
C. Occurring only at high temperatures
D. Occurring in an aqueous solution
Answer:
B
Explanation:
Spontaneous in chemical reactions means without any external input.
Occurring without added energy. Hence, option B is correct.
What is a spontaneous reaction?A spontaneous reaction is a reaction that supports the formation of products under the conditions under which the reaction is happening.
Spontaneous Reaction- a reaction that favours the formation of products at the conditions under which the reaction is occurring.
A non-spontaneous reaction can be made spontaneous if it is inside a controlled environment, this is what happens in nuclear power plants that create atomic fusion and fission in chambers that are controlled to control different particles to create nuclear active rays.
Hence, option B is correct.
Learn more about the spontaneous reaction here:
brainly.com/question/23142328
#SPJ5
