Answers
a) The genotype is Hh. We simply combine the two given letters together to get this genotype.
b) The phenotype is Widow's peak. The uppercase letter is the dominant allele, while the lowercase is recessive. Any presence of the dominant allele (even a single letter) will mean the dominant phenotype will present itself. We can see that HH leads to Widow's peak phenotype, so that applies to Hh as well. Only when there isn't a dominant allele at all, the genotype hh, is when the recessive phenotype will show up.
Related Questions
Which is TRUE about 'acidified' water acting on rocks?
Please give 1 answer.
A.
Peaty soil water does not cause weathering
B.
Limestone is eroded faster than basalt rock by this type of weathering
c.
It is an example of physical weathering
D.
Nearly neutral water will not weather rocks
Answers
where was the first oil well drilled
Answers
Answer:
First oil well in the United States, built in 1859 by Edwin L. Drake, Titusville, Pennsylvania.
KHP, the acid used in this experiment,
stands for potassium hydrogen
phosphorous.
True
False
Answers
Answer:
false
Explanation:
standard form is Potassium hydrogen phthalate
why is dilute tetraoxosulphate(VI) acid not suitable for preparing carbon monooxide
Answers
Answer: Because this does not dissolve in water - it forms a barrier on the surface of the unreacted CaCO3 which prevents any further reaction. A small volume of CO2 is produced , but this stops after a short time . Conclusion: H2SO4 cannot be used with CaCO3 to produce CO2 gas .
Explanation:
What is the value of Keq for the reaction expressed in scientific notation? 1.6 ´ 10–5 6.2 ´ 10–4 6.2 ´ 104 1.6 ´ 105
Answers
The question is incomplete, the complete question is:
Consider the reaction:
[tex]2NOCl\rightleftharpoons 2NO+Cl_2[/tex]
At equilibrium, the concentrations are as follows. [NOCl] = 1.4 × 10–2 M [NO] = 1.2 × 10–3 M [Cl2] = 2.2 × 10–3 M What is the value of Keq for the reaction expressed in scientific notation?
A) 1.6 × 10–5
B) 6.2 × 10–4
C) 6.2 × 10+4
D) 1.6 × 10+5
Answer: The correct option is A) [tex]1.6\times 10^{-5}[/tex]
Explanation:
The equilibrium constant is defined as the ratio of the concentration of products to the concentration of reactants raised to the power of the stoichiometric coefficient of each. It is represented by the term [tex]K_{eq}[/tex]
For the given chemical equation:
[tex]2NOCl\rightleftharpoons 2NO+Cl_2[/tex]
The expression for equilibrium constant will be:
[tex]K_{eq}=\frac{[NO]^2}{[Cl_2][NOCl]^2}[/tex]
Given values:
[tex][NO]=1.2\times 10^{-3}M[/tex]
[tex][Cl_2]=2.2\times 10^{-3}M[/tex]
[tex][NOCl]=1.4\times 10^{-2}M[/tex]
Putting values in above expression, we get:
[tex]K_{eq}=\frac{(1.2\times 10^{-3})^2\times (2.2\times 10^{-3})}{(1.4\times 10^{-2})^2}\\\\K_{eq}=1.6\times 10^{-5}[/tex]
Hence, the correct option is A) [tex]1.6\times 10^{-5}[/tex]
NO2 + H2O =
SO2 + H2O =
H2S + H2O=
Answers
SO2+ H2O=H2SO3
H2S+ H2O=H2SO4 +H2
NO2+ H2O= HNO3+NO
A bird has flown 300 metres for 6 hours. What is the bird's speed? Formula for speed = d/t * 2 points
40 m/hr
50 m/s
50 m/h
50 m/min
Answers
Answer:
C
Explanation:
d=300
t=6hr
speed=?
speed=300/6
speed=50m/hr the important thing in this question is to get the right units
(1) The solubility of Salt AB2(s) is 5mol/dm^3. (a) Obtain an expression for the solubility product of Salt AB2,in terms of s.
Answers
Answer:
See explanation
Explanation:
Let the equation of dissolution be;
AB2(s) ⇄A(aq) + 2S
Hence;
Ksp = [A] [2s]^2
Let the concentration of the species be s
Ksp= s × (2s)^2
Ksp= 4s^3
Since s= 5mol/dm^3
Ksp = 4(5mol/dm^3)^3
Ksp = 500 mol^2dm^-6
Give an example of each of the following chemical changes.
(a) A photochemical reaction involving
(i) silver salt
(ii) water
(b) A reaction involving
(i) blue solution
(ii) formation of dirty green precipitate
(c) Two gases combine to form white solid.
(d) A reaction where colour change is noticed.
Answers
Answer:
Give an example of each of the following chemical changes.
(a) A photochemical reaction involving
(i) silver salt
(ii) water
(b) A reaction involving
(i) blue solution
(ii) formation of dirty green precipitate
(c) Two gases combine to form white solid.
(d) A reaction where colour change is noticed.
Explanation:
a) A photochemical reaction involving silver salt is used in black and white photography.
AgCl breaks down and converts into Ag during this photochemical reaction.
(ii) Photochemicalreaction involving water takes place in plants during the photosynthesis process.
Plants prepare food(carbohydrate) by using sunlight water and CO2 gas.
(b) A reaction involving
(i) blue solution:
For example reaction of copper sulfate solution with an iron nail.
When an iron nail is placed in CuSO4 blue color solution, then it changes to green color and reddish-brown solid deposits at the bottom of the container.
(ii) Reaction of ferrous sulfate with NaOH forms a dirty green precipitate of ferrous hydroxide.
(C) Two gases combine and form a white solid:
For example when HCl gas reacts with ammonia gas, then a white solid of ammonium chloride will be formed.
(d) A reaction where the color change is noticed.:
When an iron nail is placed in CuSO4 blue color solution, then it changes to green color and reddish-brown solid deposits at the bottom of the container.
calculate the oxidation number of the central atom of FeSO4 7H2O
Answers
Answer:
[tex]{ \tt{let \: the \: oxidation \: state \: be \: x}} \\ { \bf{x + sulphate \: ion+ water = overall \: charge}} \\ \\ \\ { \tt{x + ( - 2) + 0 = 0}} \\ \\ { \tt{x = + 2}} \\ { \tt{oxidation \: state = + 2}}[/tex]
un estudiante introduce un corcho cuya densidad es 0.95 g/cm en cada uno de los liquidos que figura representa mejor la situacion
Answers
Answer:
La respuesta correcta es la opción A.
Explicación:
La densidad del corcho es 0.95g / cm3 por lo que se hundirá en la solución de acetona porque el corcho es más denso que la solución de acetona mientras que por otro lado, el corcho flotará en otros dos líquidos porque la densidad del corcho es menor que en otros dos líquidos o, en otras palabras, los dos líquidos son más densos que el corcho, por eso el corcho flotará en estos dos líquidos.
Figure 1 (Use this figure to answer questions 6,7, and 8. Assume that the height at point
A and point C are the same)
С
B
As the car moves from point A, to point B, and finally to point C, the total energy of the car
decreases from point A to point B, then increases from point B to point
increases from point A to point B, then decreases from point B to point
O is lost between points B and C
stays the same, but is converted between potential and kinetic energy
Answers
Answer:
JWBVH
Explanation:
NWSBWHSBHS
What volume of 12 M NaOH and 2 M NaOH should be mixed to get 2 litres of 9 M NaOH solution?
Answers
The volume of 12 M NaOH and 2 M NaOH should be mixed to get 2 litres of 9 M NaOH solution is 1.4 L and 0.6 L
What is Concentration ?
In chemistry, concentration is the abundance of a constituent divided by the total volume of a mixture.
Several types of mathematical description can be distinguished: mass concentration, molar concentration, number concentration, and volume concentration.
Amount of stuff = concentration x volume.
We can set up 2 equations:
V₁ = volume 12M NaOH.V₂ = volume 2M NaOH.(12×V₁) + (2×V₂) = 9×2 = 18
12V₁ + 2V₂ = 18 (1)
V₁ + V₂ = 2 (2)
From (2) we get:
V₁ = (2 − V₂)
Substituting V₁ back into (1) ⇒
12 (2−V₂) + 2V₂ = 18
24 − 12V₂ + 2V₂ = 18
10V₂ = 6
V₂ = 0.6L
From (2) we can say:
V₁ + 0.6 = 2
V₁ = 2 − 0.6 = 1.4L
Therefore, The volume of 12 M NaOH and 2 M NaOH should be mixed to get 2 litres of 9 M NaOH solution is 1.4 L and 0.6 L
Learn more about concentration here ;
https://brainly.com/question/19221273
#SPJ2
Será lançado na próxima quarta-feira, 1º de julho, em São Bernardo do Campo (SP), o primeiro ônibus brasileiro a hidrogênio. [...] O projeto Ônibus Brasileiro à Célula Combustível a Hidrogênio é o ponto de partida para o desenvolvimento de uma solução mais limpa para o transporte público urbano no Brasil. (Disponível em: Acesso em: 19 out. 2009.) Quanto aos processos químicos envolvidos na produção de energia elétrica em células de combustíveis a partir do oxigênio e do hidrogênio, é correto afirmar:
Answers
A gas has a volume of 1000.0 mL at a temperature of 20.OK and a pressure
of 1.0 atm. What will be the new volume when the temperature is changed
to 40.0K and the pressure is changed to
0.5 atm?
Answers
Answer:
4000mL
Explanation:
Using the combined gas law equation;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (atm)
P2 = final pressure (atm)
V1 = initial volume (mL)
V2 = final volume (mL)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information given in this question:
V1 = 1000mL
T1 = 20K
P1 = 1.0atm
V2 = ?
P2 = 0.5atm
T2 = 40K
Using P1V1/T1 = P2V2/T2
1 × 1000/20 = 0.5 × V2/40
1000/20 = 0.5V2/40
50 = 0.5V2/40
50 × 40 = 0.5V2
2000 = 0.5V2
V2 = 2000/0.5
V2 = 4000mL
If 3.02 g of CuNO3 is dissolved in water to make a 0.560 M solution, what is the volume of the solution in milliliters?
Answers
Answer: The volume of the solution is 28.75 mL
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Molarity of copper nitrate = 0.560 M
Given mass of copper nitrate = 3.02 g
Molar mass of copper nitrate = 187.56 g/mol
Putting values in equation 1, we get:
[tex]0.560=\frac{3.02\times 1000}{187.56\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{3.02\times 1000}{187.56\times 0.560}=28.75mL[/tex]
Hence, the volume of the solution is 28.75 mL
Which of the following would DECREASE the rate of a reaction?
1. add a catalyst
2. increase the concentration
3. increase the volume
4. increase the pressure
Answers
Answer: increasing volume
Explanation: adding a catalyst would increase reaction time and increasing INCREASING concentration definently makes reaction time alot faster increasing pressure actually makes it more concentrated, so no it is not
Question 1 of 10
What does a low number on the pH scale say about a solution?
O A. The solution is an acid,
O B. The solution is changing.
O C. The solution is a base.
O D. The solution sg neutral.
Answers
How do the Carnivorous plants survive without soil?
Answers
Carnivorous plants are easy to grow, if you follow a few, simple rules.
Wet all of the time.
Mineral-free water.
Mineral-free soil.
Lots of light.
Wet all of the time.
Carnivorous plants are native to bogs and similar nutrient-poor habitats. As a consequence, the plants live in conditions that are constantly damp. To grow healthy carnivorous plants, it is important to duplicate their habitat as closely as possible. Keep the soil wet or at least damp all of the time. The easiest way to do this is use the tray method. Set the pots in a tray or saucer, and keep water in it at all times. Pitcher plants can grow in soggy soil with the water level in the saucer as deep as 1/2 the pot, but most carnivorous plants prefer damp to wet soil, so keep the water at about 1/4 inch and refill as soon as it is nearly gone. Water from below, by adding water to the tray, rather than watering the plant. This will avoid washing away the sticky muscilage of the sundews and butterworts and keep from closing the flytraps with a false alarm.
Mineral-free water.
Always use mineral-free water with your carnivorous plants, such as rainwater or distilled water. Try keeping a bucket near the downspout to collect rainwater. Distilled water can be purchased at the grocery store, but avoid bottled drinking water. There are simply too many minerals in it. The condensation line from an air conditioner or heat pump is another source of mineral-free water. Reverse-osmosis water is fine to use. Carnivorous plants grow in nutrient poor soils. The minerals from tap water can “over-fertilize” and “burn out” the plants. In a pinch, tap water will work for a short while, but flush out the minerals with generous portions of rainwater, when it is available.
Mineral-free soil.
The nutrient poor soils to which the carnivorous plants have adapted are often rich in peat and sand. This can be duplicated with a soil mixture of sphagnum peat moss and horticultural sand. Be sure to check the peat label for sphagnum moss. Other types will not work well. The sand should be clean and washed. Play box sand is great, and so is horticultural sand. Avoid “contractor’s sand” which will contain fine dust, silt, clay and other minerals. Never use beach sand or limestone based sand. The salt content will harm the plants. The ratio of the mix is not critical, 1 part peat with 1 part sand works well for most carnivorous plants. Flytraps prefer a bit more sand, and nepenthes prefer much more peat. Use plastic pots, as terra cotta pots will leach out minerals over time and stress your plants.
Explanation:
Kayo na Po bahala magpaigsi
Answer:
A simple answer: Carnivores don't eat plants only flesh. So they would not need soil. But it would be hard for Carnivores to get energy because they get energy indirectly from the animals (herbivores) that they eat. How do they get the energy from a herbivore you might ask. Herbivores eat only plants and that gives the herbivore the plant's energy; but if the herbivore gets eaten, it is indirectly transferred into the Carnivore. Hope this helped!!
Carnivore = only feeds on flesh
Herbivore = eats only plants
Omnivore = eats plants and animals/flesh
What is meant by term valency? Explain it in terms of electrons donations and acceptance.
Answers
Answer:
Valency can be defined as a measure of the combining power of a chemical element with other atoms to form a molecule or chemical compound.
Explanation:
An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.
Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.
In Chemistry, electrons can be defined as subatomic particles that are negatively charged and as such has a magnitude of -1.
Valence electrons can be defined as the number of electrons present in the outermost shell of an atom. Valence electrons are used to determine whether an atom or group of elements found in a periodic table can bond with others. Thus, this property is typically used to determine the chemical properties of elements.
Valency can be defined as a measure of the combining power of a chemical element with other atoms to form a molecule or chemical compound.
Typically, valency is measured by the amount of hydrogen atoms that a chemical element can combine with or displace to form a molecule or chemical compound.
For example, Oxygen has a total number of eight (8) electrons while neon has total number of ten (10) electrons. Therefore, an atom of oxygen is able to gain (accept or receive) two (2) more electrons in order to have the same electron arrangements as the noble gas i.e an atom of neon with an atomic number of 10.
What mass of Na2SO4is needed to make 2.5 L of 2.0 Msolution? (Na = 23 g; S = 32 g; O = 16 g)
a.356 g
b.284 g
c.710 g
d.178 g
Answers
Answer:
mass (g) needed = 710.2 grams Na₂SO₄(s)
Explanation:
Needed is 2.5 Liters of 2.0M Na₂SO₄; formula wt Na₂SO₄ = 142.04g/mol.
mass (grams) of Na₂SO₄(s) = Molarity needed x Volume needed in Liters x Formula Wt of solute
mass (grams) of Na₂SO₄(s) = (2.5L)(2.0M)(142.04g/mol) = 710.2 grams Na₂SO₄(s)
Mixing: Transfer 710.4 grams Na₂SO₄ into mixing vessel and add water-solvent up to but not to exceed 2.5 Liters total volume. Mix until dissolved.
Gives 2.5 Liters of 2.0M Na₂SO₄(aq) solution.
The number of molecules in 17.9 g of CO is
Answers
Answer:
3.85 × 10²³ molecules CO
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableCompoundsMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:
Step 1: Define
Identify
[Given] 17.9 g CO
[Solve] molecules CO
Step 2: Identify Conversions
Avogadro's Number
[PT] Molar Mass of C: 12.01 g/mol
[PT] Molar Mass of O: 16.00 g/mol
Molar Mass of CO: 12.01 + 16.00 = 28.01 g/mol
Step 3: Convert
[DA] Set up: [tex]\displaystyle 17.9 \ g \ CO(\frac{1 \ mol \ CO}{28.01 \ g \ CO})(\frac{6.022 \cdot 10^{23} \ molecules \ CO}{1 \ mol \ CO})[/tex][DA] Divide/Multiply [Cancel out units]: [tex]\displaystyle 3.8484 \cdot 10^{23} \ molecules \ CO[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
3.8484 × 10²³ molecules CO ≈ 3.85 × 10²³ molecules CO
Question 9 of 10
Which functional group does the molecule below have?
Answers
Answer:
Hydroxyl
Explanation:
A P E X
A boulder rests on a ledge 31.2 m above a lake. If it has 2.65 x 10 J of gravitational
potential energy relative to the lake surface, what is the mass of the boulder?
Answers
Answer:
This question is incomplete, the gravitational potential energy is 2.65 x 10^5 J
mass of the boulder = 866.7g
Explanation:
Potential energy (P.E) refers to the energy due to the position of a body. It can be calculated as follows:
P.E = m × g × h
Where;
m = mass of substance (g)
g = acceleration due to gravity (m/s²)
h = height (m)
According to the information provided in this question,
h = 31.2 m
g = 9.8m/s²
m = ?
P.E = 2.65 x 10^5 J
Using P.E = m × g × h
2.65 x 10^5 = m × 9.8 × 31.2
2.65 x 10^5 = 305.76m
265000 = 305.76m
m = 265000 ÷ 305.76
m = 866.69
mass of the boulder = 866.7g
An earthquake occurs at 8:15:35 PM, and a seismic station detects the P-
wave at 8:20:05 PM. What was the travel time for the P-wave to this
seismic station? *
- 3 minutes and 30 secs
-4 minutes and 30 secs
-5 minutes and 30 secs
-6 minutes and 30 secs
Answers
Answer:
5 minutes 35 seconds because an earthquake travels underground faster than on the surface
CHEM FINAL PLEASE HELP
This is?
alkene
aromatic hydrocarbon
alkyne
alkane
Answers
Answer:
It is alkyne
Explanation:
Which method of separation would you use, if you want to collect.....A.Some sugar from a sugar solution? B.Rice grains, which have accidentally been mixed with flour? C.Some pure water from salty water?D.Some salt from salty water?E.Some clear water from muddy water?
Answers
Answer:
Explanation:
B.Rice grains, which have accidentally been mixed with flour
Subtract to find the temperature changes
for the water and the metal.
Answers
Answer:
???what metal????????????
Which two of the following changes of state involve solids?
Select two (2) answers
A. melting
B. boiling
C. freezing
D. evaporating
Answers
Answer:
Answer is A... Melting and freezing
State the name(s) of the sub-atomic particle(s) that have/has a positive charge. Answer with the name of the particle(s) only.
A. Neurons
B. Protons
C. Electrons
Answers
Answer:
protons because they have the most positive charge
