Please help!!
Which pair represents the same complex number?

To evaluate the limit [tex]\sf \lim_{x,y \to \infty} \frac{x+y}{x^{2} +y^{2}-xy} \\[/tex], we can analyze the behavior of the expression as both [tex]\sf x \\[/tex] and [tex]\sf y \\[/tex] approach infinity.

Let's consider the numerator [tex]\sf x + y \\[/tex] and the denominator [tex]\sf x^{2} + y^{2} - xy \\[/tex] separately.

For the numerator, as both [tex]\sf x \\[/tex] and [tex]\sf y \\[/tex] approach infinity, their sum [tex]\sf x+y \\[/tex] will also approach infinity.

For the denominator, we can rewrite it as [tex]\sf (x-y)^2 + 2xy \\[/tex]. As [tex]\sf x[/tex] and [tex]\sf y[/tex] approach infinity, the terms [tex]\sf (x-y)^2 \\[/tex] and [tex]\sf 2xy \\[/tex] will also approach infinity. Therefore, the denominator will also approach infinity.

Now, let's consider the entire fraction [tex]\sf \frac{x+y}{x^{2} +y^{2}-xy} \\[/tex]. Since both the numerator and denominator approach infinity, we have an indeterminate form of [tex]\sf \frac{\infty}{\infty} \\[/tex].

To evaluate this indeterminate form, we can apply techniques such as L'Hôpital's rule or algebraic manipulations. However, in this case, we can simplify the expression further.

By dividing both the numerator and denominator by [tex]\sf x^{2} \\[/tex], we get:

[tex]\sf \lim_{x,y \to \infty} \frac{\frac{x}{x^{2}} + \frac{y}{x^{2}}}{1 + \frac{y^{2}}{x^{2}} - \frac{xy}{x^{2}}} \\[/tex]

As [tex]\sf x[/tex] approaches infinity, the terms [tex]\sf \frac{x}{x^{2}} \\[/tex] and [tex]\sf \frac{y}{x^{2}} \\[/tex] both approach zero. Similarly, the term [tex]\sf \frac{y^{2}}{x^{2}}[/tex] and [tex]\sf \frac{xy}{x^{2}} \\[/tex] also approach zero.

Therefore, the limit simplifies to:

[tex]\sf \lim_{x,y \to \infty} \frac{0 + 0}{1 + 0 - 0} = \frac{0}{1} = 0 \\[/tex]

Hence, the limit [tex]\sf \lim_{x,y \to \infty} \frac{x+y}{x^{2} +y^{2}-xy} \\[/tex] is equal to 0.

A ferris wheel is 10 meters in diameter and boarded from a platform that is 2 meters above the ground. The equation for the height above the ground, h = f(t), is:

f(t) = 5 sin[(π/2) t]

The ferris wheel completes one full revolution in 2 minutes, which means it takes 2 minutes for the wheel to go from its starting position to the same position again. Since a full revolution covers 360 degrees, we can say that in 2 minutes, the angle covered by the wheel is 360 degrees.

To find the equation for the height above the ground, we can use the sine function, as the height of a point on the wheel can be represented by the vertical component of the radius.

Let's consider the position at the six o'clock as the starting point, where the height above the ground is 2 meters. At this position, the angle is 0 degrees or 0 radians.

Now, as the wheel turns, the angle increases. We can relate the angle to time by assuming a constant angular velocity since the wheel completes one revolution in 2 minutes. Therefore, the angular velocity is (360 degrees / 2 minutes) = 180 degrees per minute.

Using radians, the angular velocity is (π radians / 2 minutes) = (π/2) radians per minute.

Thus, the equation for the height above the ground, h = f(t), is given by:

h = 5 sin[(π/2) t].

In this equation, t represents time in minutes, and h represents the height above the ground. The amplitude of the sine function is 5 since the radius of the ferris wheel is 5 meters (half of the diameter). The sine function generates values between -1 and 1, so multiplying by 5 ensures that the height varies between -5 and 5, relative to the starting position at 2 meters above the ground.

Therefore, the equation for the height above the ground is f(t) = 5 sin[(π/2) t].

For more such questions on ferris wheel, click on:

https://brainly.com/question/30808694

#SPJ8

Angle "a" in the given isosceles triangle is 40 degrees.

To find the size of angle "a" in the isosceles triangle with a 40-degree angle, we can use the properties of isosceles triangles. In an isosceles triangle, the two equal sides are opposite the two equal angles.

Since the given angle is 40 degrees, we know that the other two angles in the triangle are also equal. Let's call these angles "b" and "c." Therefore, we have:

b = c

Since the sum of the angles in a triangle is always 180 degrees, we can write the equation:

40 + b + c = 180

Since b = c, we can rewrite the equation as:

40 + b + b = 180

Combining like terms, we have:

2b + 40 = 180

Subtracting 40 from both sides, we get:

2b = 140

Dividing both sides by 2, we find:

b = 70

Therefore, both angles "b" and "c" are 70 degrees.

Now, we can find angle "a" by subtracting the sum of angles "b" and "c" from 180 degrees:

a = 180 - (b + c)

= 180 - (70 + 70)

= 180 - 140

= 40

For more such questions on isosceles triangle visit:

https://brainly.com/question/29793403

#SPJ8

The values into the slope-intercept form, we have y = -5x - 6

The slope-intercept form of a linear equation is given by:

y = mx + b

where 'm' represents the slope of the line, and 'b' represents the y-intercept.

In this case, the y-intercept is (0, -6), which means that the line crosses the y-axis at the point (0, -6).

The slope is given as -5.

Therefore, substituting the values into the slope-intercept form, we have:

y = -5x - 6

This equation represents the line with a y-intercept of (0, -6) and a slope of -5.

for such more question on slope-intercept form

https://brainly.com/question/11990185

#SPJ8

Answer:

[tex]\textsf{23)} \quad y=3\left(\dfrac{5}{3}\right)^x[/tex]

[tex]\textsf{24)} \quady=2\left(\dfrac{1}{2}\right)^x[/tex]

Step-by-step explanation:

The general formula for an exponential function is:

[tex]\boxed{\begin{minipage}{9 cm}\underline{General form of an Exponential Function}\\\\$y=ab^x$\\\\where:\\\phantom{ww}$\bullet$ $a$ is the initial value ($y$-intercept). \\ \phantom{ww}$\bullet$ $b$ is the base (growth/decay factor) in decimal form.\\\end{minipage}}[/tex]

From inspection of the given graph, the exponential curve passes through the points (0, 3) and (1, 5).

The y-intercept is the value of y when x = 0. Therefore, a = 3.

To find the value of b, substitute point (1, 5) and the found value of a into the exponential function formula:

[tex]\begin{aligned}y&=ab^x\\\\\implies 5&=3b^1\\\\5&=3b\\\\b&=\dfrac{5}{3}\end{aligned}[/tex]

To write an equation for the graphed exponential function, substitute the found values of a and b into the formula:

[tex]\boxed{y=3\left(\dfrac{5}{3}\right)^x}[/tex]

[tex]\hrulefill[/tex]

From inspection of the given graph, the exponential curve passes through points (-1, 4) and (0, 2).

The y-intercept is the value of y when x = 0. Therefore, a = 2.

To find the value of b, substitute point (-1, 4) and the found value of a into the exponential function formula:

[tex]\begin{aligned}y&=ab^x\\\\\implies 4&=2b^{-1}\\\\2&=b^{-1}\\\\2&=\dfrac{1}{b}\\\\b&=\dfrac{1}{2}\end{aligned}[/tex]

To write an equation for the graphed exponential function, substitute the found values of a and b into the formula:

[tex]\boxed{y=2\left(\dfrac{1}{2}\right)^x}[/tex]

The errors in the proposed statement to prove by contradiction that 3·√2 - 7 is an irrational number, is the option;

Proving by contradiction is an indirect method of proving a fact or a reductio ad absurdum, which is a method of proving a statement by the assumption that the opposite of the statement is true, then showing that a contradiction is obtained from the assumption.

The definition of rational numbers are numbers that can be expressed in the form a/b, where a and b are integers

The assumption that 3·√2 - 7 is a rational number indicates that we get;

3·√2 - 7 = a/b, where a and b are integers

Therefore, the error in the method used to prove that 3·√2 - 7 is an irrational number is the option; To apply the definition of rational, a and b must be integers. This is so as the value 3·√2 - 7 is a real number, which is also an irrational number, thereby contradicting the supposition.

Learn more on rational numbers here: https://brainly.com/question/31330500

#SPJ1

The equation of the Line of the form y = mx is y = -x + 3.

To write an equation of the form y = mx for the line shown below (-1,4), we need to determine the slope (m) of the line first.

Let (x₁, y₁) = (-1, 4) be a point on the line. Now let's find another point on the line. Let's say we have another point (x₂, y₂) = (1, 2).The slope (m) of the line can be calculated using the formula:m = (y₂ - y₁) / (x₂ - x₁)Substituting the values,

we get:m = (2 - 4) / (1 - (-1))= -2 / 2= -1

Now that we know the slope of the line, we can use the point-slope form of the equation of a line to write the equation of the line:y - y₁ = m(x - x₁)Substituting the values, we get:y - 4 = -1(x - (-1))y - 4 = -1(x + 1)y - 4 = -x - 1y = -x - 1 + 4y = -x + 3

Therefore, the equation of the line is y = -x + 3 in slope-intercept form. Since the question specifically asks for the equation of the form y = mx, we can rewrite the equation in this form by factoring out the slope:y = -x + 3y = (-1)x + 3

Thus, the equation of the line of the form y = mx is y = -x + 3.

For more questions on Line.

https://brainly.com/question/280216

#SPJ8

The quadratic equation is x² + (k - 3)x + 4 = 0.

The values of k are 7 and -1.

Given: The quadratic equation is x² + (k - 3)x + 4 = 0.

Now, we can find the possible values of k.

To find the values of k, we will apply the discriminant formula of quadratic equation which is given by: [tex]$D=b^2-4ac$[/tex] ,where a,b and c are the coefficients of the quadratic equation: ax²+bx+c

Roots of the quadratic equation are given by:

[tex]$x=\frac{-b\pm \sqrt{b^2-4ac}}{2a}$[/tex]

Now, let's apply these formulas to the given quadratic equation:

x² + (k - 3)x + 4 = 0

Comparing with the standard quadratic equation of the form ax² + bx + c = 0, we get:

[tex]a = 1, b = k - 3, and c = 4$\\D = b^2 - 4ac$= $(k - 3)^2 - 4(1)(4)$= $k^2 - 6k + 9 - 16$= $k^2 - 6k - 7$[/tex]

The roots of the given quadratic equation are given by:

[tex]$x = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}$[/tex]

Substituting the values of a, b, c, and D, we get:

[tex]$x = \frac{-(k - 3) \pm \sqrt{(k - 3)^2 - 4(1)(4)}}{2(1)}$$x = \frac{3 - k \pm \sqrt{k^2 - 6k - 7}}{2}$[/tex]

Now, for the quadratic equation to have real and equal roots, the discriminant must be equal to zero, i.e., [tex]$D = 0$$\ therefore, k^2 - 6k - 7 = 0$.[/tex]

Factoring the quadratic equation, we get:

[tex]$k^2 - 7k + k - 7 = 0$$\\k(k - 7) + 1(k - 7) = 0$$\\(k - 7)(k + 1) = 0$[/tex]

So, the possible values of k are k = 7 and k = -1.

Hence, the values of k are 7 and -1.

For more question on equation

https://brainly.com/question/17145398

#SPJ8

Answer:

a) See below.

b) $911 billion

c) See below.

Step-by-step explanation:

Linear regression is a statistical technique used to model the relationship between a dependent variable and one or more independent variables by fitting a linear equation to the observed data.

It estimates the slope and y-intercept of a straight line that minimizes the overall distance between the observed data points and the predicted values. The linear regression equation is y = ax + b.

The association between year and amount of disposable income is indicated by the linear regression equation y = ax + b.

The value of a is the slope of the linear regression line, and represents the average rate of change in disposable income per year. As a = 14.0545, it means that the disposable income increases by approximately $14.0545 billion dollars each year.  

As the value of r (correlation coefficient) is very close to +1, it indicates a very strong positive linear correlation between the year and disposable income. This suggests that as the years progress, the disposable income tends to increase.

Linear regression equation:

[tex]\boxed{y=14.05454545x-27198}[/tex]

To predict the amount of disposable income for the year 2000, we can substitute x = 2000 into the linear regression equation:

[tex]y = 14.05454545 \cdot 2000 - 27198[/tex]

[tex]y=28109.0909...-27198[/tex]

[tex]y=911.0909...[/tex]

[tex]y=911[/tex]

Therefore, the predicted amount of disposable income for the year 2000 is approximately $911 billion.

The predicted value of $911 billion for the year 2000 is significantly lower than the actual value of $8128 billion. This implies that the model is not accurately capturing the increasing trend in disposable income over time, leading to an underestimation of the income level in 2000. This suggests that the model may have limitations or inaccuracies when extrapolating beyond the range of the provided data. It indicates the need for caution and further analysis when using the model to make predictions outside of the given timeframe.

The two-way frequency table that correctly shows the marginal frequencies is Table B.

A two-way frequency table is used to display the frequencies of two categories of variables collected from a single group. We are asked to find the two-way frequency table that correctly shows the marginal frequencies and to do this, we can see that in the second table, the sum of men who participated in the survey amounted to

12 + 86 = 98

Now the total number of adults that participated in the survey was 200. This means that the number of women was 102. That is;

200 - 98 = 102

The only table that represents the number of women as 98 is table B and this makes it the correct choice.

Learn more about a two-way frequency table here:

https://brainly.com/question/16148316

#SPJ1

The probability that either event will occur is 0.33

From the question, we have the following parameters that can be used in our computation:

Using the above as a guide, we have the following:

Total = A + B + C

So, we have

Total = 8 + 7 + 30

Evaluate

Total = 45

So, we have

P(A) = 8/45

P(B) = 7/45

For either events, we have

P(A or B) = 8/45 + 7/45

P(A or B) = 15/45

Evaluate

P(A or B) = 0.33

Hence, the probability that either event will occur is 0.33

Read more about probability at

brainly.com/question/251701

#SPJ1

The correct statement is:

Only some rectangles are parallelograms.

Parallelograms have 2 pairs of parallel sides.

The only rectangles with exactly one pair of parallel sides are some of them.

This statement is true. A quadrilateral having opposing sides that are parallel is known as a parallelogram. In the case of a rectangle, all four angles are right angles, and opposite sides are equal in length. Therefore, a rectangle can be considered a special type of parallelogram.

However, not all parallelograms are rectangles because parallelograms can have angles that are not right angles.

So, while all rectangles are parallelograms, not all parallelograms are rectangles. Thus, only some rectangles have two pairs of parallel sides.

for such more question on rectangles

https://brainly.com/question/20339811

#SPJ8

Answer:

  3902.2 ft

Step-by-step explanation:

You want the length of cable required to span the distance from the top of a mountain 3400 ft above the plain from a location 940 ft from the base of the mountain, which rises at an angle of 74°.

The edge of the base of the mountain will be at a horizontal distance from the point below the peak given by ...

  Tan = Opposite/Adjacent

  Adjacent = Opposite/Tan

  width to center = (3400 ft)/tan(74°) ≈ 974.93 . . . . feet

The cable is the hypotenuse of a right triangle with one leg 3400 ft and the other (974.93 +940) = 1941.93 ft. The length of that is ...

  c = √(3400² +1914.93²) ≈ 3902.2 . . . . feet

The shortest length of cable needed is about 3902.2 feet.

<95141404393>

The price of each notepad was approximately $2.75, and 10 notepads were sold for a total revenue of $26.65.

Let's assume the price of each notepad after the markdown is x dollars. Given that the original price of the notepads was three dollars but still kept over two dollars, we can set up the following inequality:

2 < x < 3

Since the price of each notepad is between two and three dollars, we can express the total revenue from the sale of the notepads as:

Total revenue = Number of notepads × Price per notepad

We are given that the total revenue is $26.65. So we can write the equation as:

26.65 = Number of notepads × x

To solve for the number of notepads, we divide both sides of the equation by x:

Number of notepads = 26.65 / x

We need to find a whole number solution for the number of notepads. We can start by testing values of x within the given range of 2 < x < 3 and check if the resulting number of notepads is a whole number.

Let's try x = 2.50:

Number of notepads = 26.65 / 2.50 = 10.66

Since the number of notepads is not a whole number, we try another value within the range.

Let's try x = 2.60:

Number of notepads = 26.65 / 2.60 = 10.25

Again, the number of notepads is not a whole number. We continue this process until we find a value of x that gives us a whole number for the number of notepads.

After trying various values, we find that for x = 2.75:

Number of notepads = 26.65 / 2.75 ≈ 9.67

Since the number of notepads should be a whole number, we can round 9.67 to the nearest whole number, which is 10.

Therefore, the price of each notepad is approximately $2.75, and 10 notepads were sold.

For more such question on revenue. visit :

https://brainly.com/question/30495119

#SPJ8

We can conclude that point A is located at the origin (0, 0).

There is only one possible location for point A is at the origin.

Let's revisit the given information to determine the possible location of point A.

Point C has the same y-coordinate as point B.

This means that the y-coordinate of point C is equal to the y-coordinate of point B.

The distance between point B and point C is equal to the distance between point C and the y-axis.

Let's assume the distance between point B and point C is represented by "d".

According to the information given, the distance between point C and the y-axis is also "d".

Point A has the same x-coordinate as point C.

This implies that the x-coordinate of point A is equal to the x-coordinate of point C.

The distance between point A and point C is twice the distance between point B and point C.

Let's assume the distance between point B and point C is represented by "d".

According to the information given, the distance between point A and point C is 2d.

Based on this information, we can analyze the relationships between the points:

Since the distance between point B and point C is equal to the distance between point C and the y-axis, we can infer that point B lies on the y-axis.

The x-coordinate of point B is 0.

As point C has the same y-coordinate as point B, the y-coordinate of point C is also determined to be the same as the y-coordinate of point B.

Since point A has the same x-coordinate as point C, the x-coordinate of point A will also be 0.

The distance between point A and point C is twice the distance between point B and point C.

As the distance between point B and point C is "d", the distance between point A and point C is 2d.

For similar questions on possible location

https://brainly.com/question/18181905

#SPJ11

After getting the integration  [tex]e^{(1-3x)} dx[/tex] with upper-limit 1 and lower-limit -1, we get [tex]\frac{-1}{3}[e^{-2}-e^{4}][/tex]

We know,

[tex]\int\limits^a_{b} {f(x)} \, dx[/tex] = [tex][F(x)]\limits^a_b[/tex]=F(a)- F(b).

Where,

a⇒Upper limit.

b⇒Lower limit,

f(x)⇒Any function of x.

F(x)⇒ [tex]\int {f(x)}[/tex] gives its antiderivative F(x).

Now here,

a is given as +1, and b is given as -1.

f(x)= [tex]e^{(1-3x)}[/tex].

Suppose, 1-3x =t.

∴ -3dx =dt.[By applying derivative rule]

Now,[tex]\int\limits e^{(1-3x)} dx[/tex]

=[tex]\int e^t.(\frac{-1}{3} ) dt[/tex]

=[tex]-\frac{1}{3} \int {e^t} dt[/tex].

=[tex]-\frac{e^t}{3}dt[/tex]

=[tex]\frac{1}{3}e^{(1-3x)}[/tex]

∴,[tex]\int\limits e^{(1-3x)} dx[/tex]  =[tex]\frac{1}{3}e^{(1-3x)}[/tex].

So,[tex]\int\limits^1_{-1} e^{(1-3x)} \, dx[/tex]

=- [tex][\frac{1}{3}e^{(1-3x)}]^1_{-1}[/tex]

=[tex]\frac{-1}{3}[e^{(1-3)}-e^{(1+3)}][/tex]

=[tex]\frac{-1}{3}[e^{-2}-e^{4}][/tex]

Learn more about Intergrals,

https://brainly.com/question/27419605

Answer:

To determine the crossover point, we need to find the production volume at which the total cost of each process is equal. Let's denote the production volume as "x."

For Process A:

Fixed cost = $50,000

Variable cost = $10 per unit

Total cost for Process A = Fixed cost + (Variable cost * x)

For Process B:

Fixed cost = $30,000

Variable cost = $15 per unit

Total cost for Process B = Fixed cost + (Variable cost * x)

The selling price for the product is $25 per unit.

To find the crossover point, we'll equate the total costs of both processes and solve for "x."

Total cost for Process A = Total cost for Process B

$50,000 + ($10 * x) = $30,000 + ($15 * x)

Now, let's solve this equation to find the crossover point:

$50,000 + $10x = $30,000 + $15x

$10x - $15x = $30,000 - $50,000

-$5x = -$20,000

x = -$20,000 / -$5

x = 4,000

Therefore, the crossover point occurs at a production volume of 4,000 units.

To determine which process should be chosen above that volume, we'll compare the total costs of each process at a production volume greater than 4,000 units.

For Process A:

Total cost for Process A = $50,000 + ($10 * x)

Total cost for Process A = $50,000 + ($10 * 4,000)

Total cost for Process A = $50,000 + $40,000

Total cost for Process A = $90,000

For Process B:

Total cost for Process B = $30,000 + ($15 * x)

Total cost for Process B = $30,000 + ($15 * 4,000)

Total cost for Process B = $30,000 + $60,000

Total cost for Process B = $90,000

At a production volume greater than 4,000 units, both Process A and Process B have the same total cost of $90,000. Therefore, either process can be chosen above that volume without any cost advantage.

Answer:

introduction of a business invironment

To draw the 6th term, represent it visually within the context of the pattern or sequence from which it is derived.

To draw the 6th term, we need to understand the context or pattern from which the term is derived.

Drawing the term usually involves representing the elements or characteristics of the pattern in a visual form.

Without specific information about the pattern, we can provide a general approach to drawing the 6th term.

Identify the Pattern:

Determine the sequence or pattern from which the 6th term is derived.

It could be a numerical sequence, a geometric pattern, or any other pattern.

For example, if the pattern is a number sequence of multiples of 3, the first few terms would be 3, 6, 9, 12, 15, and so on.

Visualize the Pattern: Based on the identified pattern, visualize how the elements change or progress from term to term.

This could involve drawing a diagram, a graph, or any visual representation that captures the pattern.

Consider using a coordinate grid, a number line, or any other suitable visual aid.

Locate the 6th Term:

Use the information from the pattern and the visualization to determine the specific position or value of the 6th term.

In our example of multiples of 3, the 6th term would be 18.

Draw the 6th Term: Finally, represent the 6th term in your chosen visual form.

This could mean marking the position on a number line, plotting a point on a graph, or incorporating the value into a diagram.

Note that the specific method of drawing the 6th term will depend on the nature of the pattern and the context in which it is given.

Providing more details about the pattern would allow for a more accurate and specific visual representation of the 6th term.

For similar question on sequence.

https://brainly.com/question/28036578

#SPJ8

The correct statement about rectangles is:

1. All rectangles are parallelograms.

2. Parallelograms have exactly 1 pair of parallel sides.

3. So, all rectangles have exactly 1 pair of parallel sides.

A rectangle is a type of parallelogram that has additional properties. By definition, a rectangle is a quadrilateral with four right angles. This means that opposite sides of a rectangle are parallel. Since all four sides of a rectangle are right angles, it follows that a rectangle has exactly 1 pair of parallel sides.

Option 1 states that only some rectangles are parallelograms, which is incorrect. All rectangles are parallelograms because they have opposite sides that are parallel.

Option 2 states that parallelograms have 2 pairs of parallel sides, which is also incorrect. Parallelograms have exactly 2 pairs of parallel sides, not 4. A rectangle is a special type of parallelogram that has additional properties such as all angles being right angles.

Option 3 states that only some rectangles have 2 pairs of parallel sides, which is incorrect. All rectangles have exactly 1 pair of parallel sides, not 2. Having 2 pairs of parallel sides would make a shape a parallelogram, not a rectangle.

Therefore, the correct statement is that all rectangles are parallelograms and have exactly 1 pair of parallel sides. 1,2,3 are correct.

For more suhc questions on rectangles visit:

https://brainly.com/question/25292087

#SPJ8

The inverse of the given matrix [1 0 0; 1 1 0; 1 1 1] is:

[1 0 0]

[-1 1 0]

[0 -1 1]

To find the inverse of a matrix, we can follow these steps:

Step 1: Write the given matrix and the identity matrix side by side.

[1 0 0 | 1 0 0]

[1 1 0 | 0 1 0]

[1 1 1 | 0 0 1]

Step 2: Apply row operations to transform the given matrix into the identity matrix on the left side.

Subtract the first row from the second row: R2 = R2 - R1

[1 0 0 | 1 0 0]

[0 1 0 | -1 1 0]

[1 1 1 | 0 0 1]

Subtract the first row from the third row: R3 = R3 - R1

[1 0 0 | 1 0 0]

[0 1 0 | -1 1 0]

[0 1 1 | -1 0 1]

Subtract the second row from the third row: R3 = R3 - R2

[1 0 0 | 1 0 0]

[0 1 0 | -1 1 0]

[0 0 1 | 0 -1 1]

Step 3: The matrix on the right side is now the inverse of the given matrix. Therefore, the inverse of the given matrix is:

[1 0 0]

[-1 1 0]

[0 -1 1]

The inverse of the given matrix [1 0 0; 1 1 0; 1 1 1] is:

[1 0 0]

[-1 1 0]

[0 -1 1]

For more questions on matrix

https://brainly.com/question/2456804

#SPJ8

The variance of the data-set in this problem is given as follows:

σ² = 366.3.

The variance of a data-set is calculated as the sum of the differences squared between each observation and the mean, divided by the number of values.

The mean for this problem is given as follows:

205.

Hence the sum of the differences squared is given as follows:

SS = (198 - 205)² + (190 - 205)² + (245 - 205)² + (211 - 205)² + (193 - 205)² + (193 - 205)²

SS = 2198.

There are six values, hence the variance is given as follows:

σ² = 2198/6

σ² = 366.3

More can be learned about the variance of a data-set at https://brainly.com/question/24298037

#SPJ1

Answer:

Angle ACB = 44°

There are two ways to solve it. Both are right

Solution number 1

From triangle ABC

angle BAC = 180°-(102° +44°) = 36°

Because BG is parallel with AC

Another solution

The sum of angles in the shape AGBC = 360°

Answer:

X=20

Step-by-step explanation:

20 On one side and the other side are mirror so

is 40

120-40=80

Both the top and lower triangles are similar which will be half divided

40 each scare now divide again for 2 parts of x

x=20

The slope of line e is -8/7, which represents a proper fraction

The slope of line e, which is perpendicular to line d, can be determined using the concept that the slopes of perpendicular lines are negative reciprocals of each other.

First, let's find the slope of line d using the given points (10, 8) and (2, 1). The slope (m) is calculated using the formula:

m = (y2 - y1) / (x2 - x1)

Plugging in the values, we have:

m = (1 - 8) / (2 - 10)

= (-7) / (-8)

= 7/8

Since line e is perpendicular to line d, its slope will be the negative reciprocal of 7/8. The negative reciprocal is obtained by flipping the fraction and changing its sign. Therefore, the slope of line e is -8/7.

Hence, the slope of line e is -8/7, which represents a proper fraction.

For more such answers on slope of line

https://brainly.com/question/16949303

#SPJ8

Answer:

Step-by-step explanation:

Surface area of a cone = surface area of a circle = pi r^2

250 = pi r^2

[tex]r = \sqrt{ \frac{250}{2} } = 5 \sqrt{5} \: cm[/tex]

Because the height (h) of the cone is double the length of its radius

Then

h = 2r

[tex]h \: = 2 \times 5 \sqrt{5} = 10 \sqrt{5} = 22.36 \: cm[/tex]

Answer: 6 cookies

Step-by-step explanation:

4.5 dozen is 54 cookie

Dividen 54 by the 9 parents is 6 cookie so each partner need to make at least 6 cookie

P(x) = 1

P(y) = 1

P(Y > X) = 2/5

P(Y = X) = 1/5

P(XY < 0) = 4/5

To calculate the requested probabilities based on the given probability function PX,Y (x, y), let's evaluate each one:

P(x): To calculate P(x), we need to sum up the probabilities for all y-values associated with each x-value:

P(x = 2) = 1/5

P(x = 3) = 1/5

P(x = -3) = 1/5

P(x = -2) = 1/5

P(x = 17) = 1/5

Therefore, P(x) = 1/5 + 1/5 + 1/5 + 1/5 + 1/5 = 5/5 = 1.

P(y): Similarly, to calculate P(y), we need to sum up the probabilities for all x-values associated with each y-value:

P(y = 3) = 1/5

P(y = 2) = 1/5

P(y = -2) = 1/5

P(y = -3) = 1/5

P(y = 19) = 1/5

Thus, P(y) = 1/5 + 1/5 + 1/5 + 1/5 + 1/5 = 5/5 = 1.

P(Y > X): We need to calculate the probabilities where Y is greater than X. Looking at the given probability function, we can see that there are two cases where Y is greater than X: (x = -3, y = -2) and (x = -2, y = -3), both with a probability of 1/5. Therefore, P(Y > X) = 2/5.

P(Y = X): We need to calculate the probability where Y is equal to X. From the given probability function, there is only one case where Y is equal to X: (x = 17, y = 19) with a probability of 1/5. Therefore, P(Y = X) = 1/5.

P(XY < 0): We need to calculate the probability where the product of X and Y is less than 0. Looking at the given probability function, we can see that there are four cases where the product of X and Y is less than 0: (x = 2, y = -3), (x = 3, y = -2), (x = -3, y = 2), and (x = -2, y = 3), each with a probability of 1/5. Therefore, P(XY < 0) = 4/5.

for such more question on probabilities

https://brainly.com/question/13604758

#SPJ8