PLEASE HELPPPPP!!!!!!!!!

Answer:

Generally, when thermal energy is transferred to a material, the motion of its particles speeds up and its temperature increases. There are three methods of thermal energy transfer: conduction, convection, and radiation. ... Convection transfers thermal energy through the movement of fluids or gases in circulation cells.

Explanation:

Answer:

Why do you think transferring energy into or out of a substance can change the molecules’ freedom of movement?

Explanation:

We know that transferring energy can cause a change in molecules' freedom of movement. Another way to say this is that transferring energy into or out of a substance can cause a phase change.

Answer:

The wave diagramed in blue.

Explanation:

The reason for this is because frequency is explained as the number of times something has occurred in a certain period of time.

Here, we are talking about wavelength, so the frequency is the number of times the wave can oscillate in this time length.

Say we make dots on the middle of each downward slope. How long does it take to get to each dot compared to the other diagram? The answer is the one with the least amount of time. The wave diagramed in blue.

Answer:

d

Explanation:

Answer:

D: wire

Explanation:

Answer:

The final equilibrium temperature of the tin-water mixture is approximately 18.468 °C

Explanation:

The parameters of heat energy transfer from the tin to the water are given as follows;

The mass of the sample of tin, m₁ = 0.225 kg

The initial temperature of the tin, T₁ = 97.5 °C

The mass of the water into which the tin is dropped, m₂ = 0.115 kg

The initial temperature of the water, T₂ = 10.0 °C

The specific heat capacity of tin, c₁ = 230 J/(kg·°C)

The specific heat capacity of water, c₂ = 4,200 J/(kg·°C)

Let 'T' represent the final equilibrium temperature of the tin-water mixture, we have;

The heat lost by the tin, ΔQ[tex]_{tin}[/tex] = The heat gained by the water ΔQ[tex]_{water}[/tex]

∴  ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex]

Where;

ΔQ[tex]_{tin}[/tex] = m₁·c₁·(T₁ - T)

ΔQ[tex]_{water}[/tex] = m₂·c₂·(T - T₂)

By substitution, we have;

ΔQ[tex]_{tin}[/tex] = 0.225 kg × 230 J/(kg·°C) × (97.5°C - T)

ΔQ[tex]_{water}[/tex] = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

From ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex], we have;

0.225 kg × 230 J/(kg·°C) × (97.5°C - T) = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

∴ 5,045.625 J - 51.75 J/°C × T = 483 J/°C × T - 4,830 J

5,045.625 J + 4,830 J = 534.75 J/°C × T

∴ 534.75 J/°C × T = 9,875.625 J

T =  9,875.625 J/(534.75 J/°C) = 18.4677419 °C ≈ 18.468 °C

The final equilibrium temperature of the tin-water mixture, T ≈ 18.468 °C.

Answer:

C

Explanation:

Electromagnetic waves are produced by the vibration of charged particles.

The true statement of an electromagnetic wave is option c. The wave is caused by vibrating particles of matter.

It is the wave that should be developed that leads to the vibration that lies between the electric field and a magnetic field.

Here EM waves should be composed for oscillating magnetic and electric fields.

Hence, the option c is correct.

Learn more about wave here: https://brainly.com/question/19053849

Answer:

300 J

Explanation:

From conservation of energy;

Gravitational potential energy at top = Kinetic Energy at bottom

mgh = ½mv²

We are given;

Mass; m = 12 kg.

Height; h = 2.5 m

g = 10 m/s²

Thus;

mgh = 12 × 2.5 × 10 = 300 J

Since mgh = Kinetic Energy at bottom.

Thus; kinetic energy of the ball once it reach the ground = 300 J

Answer:

Kinetic energy

Explanation:

The energy associated with an object's motion is called kinetic energy. A speeding bullet, a walking person, and electromagnetic radiation like light all have kinetic energy.

Kinetic energy. For example, a walking person.

Answer:As the name implies, the Bump and Run Reversal (BARR) is a reversal pattern that forms after excessive speculation drives prices up too far, too fast. Developed by Thomas Bulkowski, the pattern was introduced in the June-97 issue of Technical Analysis of Stocks and Commodities and also included in his book, the Encyclopedia of Chart Patterns.

THIS AIN'T MINE

Answer:

to collide with (something) with a moderately forceful impact; thump.

Explanation:

Answer:

a computer modeling

Explanation:

Answer:

Image result for Why does the Moon appear red during a lunar eclipse?

A lunar eclipse takes place when the sun, Earth and moon line up in space. The moon passes through Earth's shadow. ... Bottom line: The moon can look red during a total lunar eclipse because of sunlight that's filtered and refracted by Earth's atmosphere

Answer: Chloroplast

Explanation: Chloroplasts work to convert the Sun's light energy into sugars that cells can use. It's like a solar panel that converts energy from sunlight into electric power.

Answer:

frequency = 0.5 /s

speed = 2m/s

Explanation:

frequency = 1/period = 1/2 = 0.5 /s

speed = frequency × wavelength

= 0.5 × 4 = 2m/s

Answer:

see below

Explanation:

1) B, virtual because the when you stand in front of a mirror, the image formed is virtual and Image is laterally inverted

2) D because, when using converging lens , real image is formed, it is inverted and it can also be magnified or diminished when the object is placed at different focal length.

real image can be captured on the screen because light rays meet at the image position

when using converging lens, the image formed if it is virtual is upright.

hope this helps

Answer:

P = 928.09 Pa

Explanation:

Given that,

Mass of a gas cylinder, m = 90 kg

The diameter of the cylinder, d = 1.1 m

Radius, r = 0.55 m

We need to find the ground pressure. The pressure is equal to force per unit area. So,

[tex]P=\dfrac{F}{A}\\\\P=\dfrac{mg}{\pi r^2}\ (A\ is\ area\ of\ base)\\\\P=\dfrac{90\times 9.8}{\pi \times (0.55)^2}\\\\P=928.09\ Pa[/tex]

So, the ground pressure is 928.09 Pa.

Answer:

Potential energy does not have an absolute measurement. It is always relative to some reference point. Gravitational potential always increases when you go up and decreases when you go down. But the choice of a zero point is arbitrary.

If you’re dropping objects onto the ground, then choosing the ground as a zero point makes the calculations easier. But you could just as easily make the zero point the top of Mt. Everest, and all the answers would turn out the same. Up still means more energy and down means less, but now the PE of an object at sea level would have a negative sign, but not as negative as an object ten meters above sea level.

So everything would still work fine.

In fact, planetary astronomers take this idea to extremes. Instead of the top of Mt. Everest, they set the zero point for potential energy as infinitely high—so far “up” that gravity is so weak that going “up” another kilometer doesn’t gain you any energy. Then the value for potential energy everywhere else in the universe anywhere near a planet has a negative sign, but just as before, all the answers in relative terms turn out fine.

Explanation:

PLEASE MARK ME AS BRAINLIEST

I am 95 percent sure the answer in C

Answer: C

Explanation:

Answer:

the 750 j will have potential energy is 375

Explanation:

750/2 is 375

Answer:

Explanation:

true true fauls true fauls fauls

1 . The higher the frequency, the closer the waves are together and the LOWER the energy carried by the waves will be. FALSE

2. The greater the force that produces a wave, the greater the amplitude of the wave and the greater the energy carried by the wave. TRUE

3. In a transverse wave the higher the wave, the LOWER the amplitude FALSE

4.Wavelength is a measure of the distance from the crest on one wave to the crest on the very next wave, TRUE
5. Speed is a measure of the distance a wave travels in an amount of time TRUE

6. As a wave enters a different medium, the wave’s speed changes. Waves travel at different speeds in different media TRUE

7. The highest point of a transverse wave is the crest and the lowest point is called a trough. TRUE

A wave is a disturbance in a medium that carries energy and  as well as momentum. Energy can be transferred in the form of wave in the medium. there are two types of wave,

longitudinal wave : in which, vibration of the medium (particle) is parallel to propagation of the wave as shown in the fig.1. Sound wave is a longitudinal wave.

Transverse wave : in which, vibration of the medium (particle) is perpendicular to propagation of the wave as shown in the fig.2. Light wave is a longitudinal wave.

1. E = hυ where υ is a frequency which shows direct relation between Energy E and frequency υ. Hence it is false.

2. True

3. In a transverse wave the higher the crest in the wave, the higher the amplitude. FALSE

4. True

5. True, Speed = Distance÷Time

6. due to change in refractive index, velocity changes TRUE

7.True

To know more about wave, click :

https://brainly.com/question/3639648

#SPJ3

Answer:

Maximum Height

Explanation:

The maximum height is the highest point reached by a projected body. At this point, final velocity, v of the body is equal to 0; because upward motion is at its peak and the body start to fall again.

Hence, final velocity v is always 0 at this maximum point and the direction of motion changes from upward to downward.

Final velocity at this maximum height is zero because of the directional change experied by the object and the fact that upward motion of the body terminates at this point.

Answer:

  2 m/s

Explanation:

The crest of the wave moves 8 meters in 4 seconds, so its speed is ...

  (8 m)/(4 s) = 2 m/s

Answer:

2 m/s is the answer .

Explanation:

Answer:

Earth's rotation and orbit and the Moon's orbit cause observable patterns (Day and night, seasons, phases of the Moon, tides).

Answer:

4 N

Explanation:

mass = 2 kg

acceleration = 2 m/s^2

Force = mass * acceleration

         = 2 *2

         = 4 N

Answer:

the temperature increas

Answer:

Explanation:

Definition: Noise pollution is generally defined as regular exposure to elevated sound levels that may lead to adverse effects in humans or other living organisms.

Measures to be taken:

Answer:

imperial system

Explanation:

Answer:

british system

Explanation:

A P E X

Answer:

2.22m/s^2

Explanation:

Answer:

Is a

Explanation: